In the present paper, a comparison of the performance between moving cutting data-rescaled range analysis （MC- R/S） and moving cutting data-rescaled variance analysis （MC-V/S） is made. The results clearly indicate...In the present paper, a comparison of the performance between moving cutting data-rescaled range analysis （MC- R/S） and moving cutting data-rescaled variance analysis （MC-V/S） is made. The results clearly indicate that the operating efficiency of the MC-R/S algorithm is higher than that of the MC-V/S algorithm. In our numerical test, the computer time consumed by MC-V/S is approximately 25 times that by MC-R/S for an identical window size in artificial data. Except for the difference in operating efficiency, there are no significant differences in performance between MC-R/S and MC-V/S for the abrupt dynamic change detection. Mc-R/s and MC-V/S both display some degree of anti-noise ability. However, it is important to consider the influences of strong noise on the detection results of MC-R/S and MC-V/S in practical application展开更多
A process parameter optimization method for mold wear during die forging process is proposed and a mold life prediction method based on polynomial fitting is presented,by combining the variance analysis method in the ...A process parameter optimization method for mold wear during die forging process is proposed and a mold life prediction method based on polynomial fitting is presented,by combining the variance analysis method in the orthogonal test with the finite element simulation test in the forging process.The process parameters with the greatest influence on the mold wear during the die forging process and the optimal solution of the process parameters to minimize the wear depth of the mold are derived.The hot die forging process is taken as an example,and a mold wear correction model for hot forging processes is derived based on the Archard wear model.Finite element simulation analysis of die wear process in hot die forging based on deform software is performed to study the relationship between the wear depth of the mold working surface and the die forging process parameters during hot forging process.The optimized process parameters suitable for hot forging are derived by orthogonal experimental design and analysis of variance.The average wear amount of the mold during the die forging process is derived by calculating the wear depth of a plurality of key nodes on the mold surface.Mold life for the entire production process is predicted based on average mold wear depth and polynomial fitting.展开更多
Passive neutron multiplicity counting is widely used as a nondestructive assay technique to quantify mass of plutonium material. One goal of this technique is to achieve good precision in a short measurement time. In ...Passive neutron multiplicity counting is widely used as a nondestructive assay technique to quantify mass of plutonium material. One goal of this technique is to achieve good precision in a short measurement time. In this paper, we describe a procedure to derive mass assay variance for multiplicity counting based on the threeparameter model, and analytical equations are established using the measured neutron multiplicity distribution.Monte Carlo simulations are performed to evaluate precision versus plutonium mass under a fixed measurement time with the equations. Experimental data of seven weapons-grade plutonium samples are presented to test the expected performance. This variance analysis has been used for the counter design and optimal gate-width setting at Institute of Nuclear Physics and Chemistry.展开更多
We used spatial, global trend and post-blocking analysis to examine the effectiveness of a progeny trial in a tree breeding program for Chinese fir （Cunninghamia lanceolata （Lamb.） Hook） on a hilly site with an en...We used spatial, global trend and post-blocking analysis to examine the effectiveness of a progeny trial in a tree breeding program for Chinese fir （Cunninghamia lanceolata （Lamb.） Hook） on a hilly site with an environmental gradient from hill top to bottom. Diameter at breast height （DBH） and tree height data had significant spatial auto-correlations among rows and columns. Adding a firstorder separable autoregressive term more effectively modelled the spatial variation than did the incomplete block （IB） model used for the experimental design. The spatial model also accounted for effects of experimental design factors and greatly reduced residual variances. The spatial analysis rel- ative to the IB analysis improved estimation of genetic parameters with the residual variance reduced 13 and 19% for DBH and tree height, respectively; heritability increased 35 and 51% for DBH and tree height, respectively; and genetic gain improved 3-5%. Fitting global trend and postblocking did not improve the analyses under IB model. The use of a spatial model or combined with a design model is recommended for forest genetic trials, particularly with global trend and local spatial variation of hilly sites.展开更多
This research aims to find out the key attributes influencing the user trust towards applications on the mobile application store. In this research, both the experimental data set and the evaluation results of analysi...This research aims to find out the key attributes influencing the user trust towards applications on the mobile application store. In this research, both the experimental data set and the evaluation results of analysis are described. The analysis results include the test results of analysis of variance （ANOVA） and correlation analysis. In ANOVA, the attributes affecting user rating are derived and applied to the correlation analysis to evaluate the degree of correlation towards user rating, and in the last stage the positive or negative relationship with user satisfaction is figured out.展开更多
The article considers the impact of forestry machines on the soil of the cutting areas and presents the results of the impact of harvesters of different classes(middlesmall,middle and heavy)and configurations of wheel...The article considers the impact of forestry machines on the soil of the cutting areas and presents the results of the impact of harvesters of different classes(middlesmall,middle and heavy)and configurations of wheeled equipment and additional equipment on the soil of the cutting areas in the conditions of Kronoberg County(South of Sweden).Methods to reduce negative impact of wheeled harvesters on the soil of forests are proposed.The aim of the research is to assess the effect of the structural parameters of the wheel harvesters of different class on the soil of the cutting areas.Wheeled harvesters were loaded with 60 kN force.The results of experimental studies of the impact of wheeled harvesters on the forest soil are presented.Recommendations on the possibility of testing the results of research in the conditions of the rental base of the Western part of the North-Western Federal District of the Russian Federation are given.展开更多
基金Project supported by the National Basic Research Program of China(Grant No.2012CB955902)the National Natural Science Foundation of China(Grant Nos.41275074,41475073,and 41175084)
文摘In the present paper, a comparison of the performance between moving cutting data-rescaled range analysis （MC- R/S） and moving cutting data-rescaled variance analysis （MC-V/S） is made. The results clearly indicate that the operating efficiency of the MC-R/S algorithm is higher than that of the MC-V/S algorithm. In our numerical test, the computer time consumed by MC-V/S is approximately 25 times that by MC-R/S for an identical window size in artificial data. Except for the difference in operating efficiency, there are no significant differences in performance between MC-R/S and MC-V/S for the abrupt dynamic change detection. Mc-R/s and MC-V/S both display some degree of anti-noise ability. However, it is important to consider the influences of strong noise on the detection results of MC-R/S and MC-V/S in practical application
基金This work was supported in part by the National Natural Science Foundation of China(No.51575008).
文摘A process parameter optimization method for mold wear during die forging process is proposed and a mold life prediction method based on polynomial fitting is presented,by combining the variance analysis method in the orthogonal test with the finite element simulation test in the forging process.The process parameters with the greatest influence on the mold wear during the die forging process and the optimal solution of the process parameters to minimize the wear depth of the mold are derived.The hot die forging process is taken as an example,and a mold wear correction model for hot forging processes is derived based on the Archard wear model.Finite element simulation analysis of die wear process in hot die forging based on deform software is performed to study the relationship between the wear depth of the mold working surface and the die forging process parameters during hot forging process.The optimized process parameters suitable for hot forging are derived by orthogonal experimental design and analysis of variance.The average wear amount of the mold during the die forging process is derived by calculating the wear depth of a plurality of key nodes on the mold surface.Mold life for the entire production process is predicted based on average mold wear depth and polynomial fitting.
基金Supported by the National Natural Science Foundation of China(No.11375158)Science and Technology Development Foundation of CAEP(No.2013B0103009)
文摘Passive neutron multiplicity counting is widely used as a nondestructive assay technique to quantify mass of plutonium material. One goal of this technique is to achieve good precision in a short measurement time. In this paper, we describe a procedure to derive mass assay variance for multiplicity counting based on the threeparameter model, and analytical equations are established using the measured neutron multiplicity distribution.Monte Carlo simulations are performed to evaluate precision versus plutonium mass under a fixed measurement time with the equations. Experimental data of seven weapons-grade plutonium samples are presented to test the expected performance. This variance analysis has been used for the counter design and optimal gate-width setting at Institute of Nuclear Physics and Chemistry.
基金funded by the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(Grant No.15KJA220002)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)Fujian Province Science and Technology Research funding on the fourth Tree Breeding Cycle Program of Chinese fir(Grant No.Min Lin 2016-1)
文摘We used spatial, global trend and post-blocking analysis to examine the effectiveness of a progeny trial in a tree breeding program for Chinese fir （Cunninghamia lanceolata （Lamb.） Hook） on a hilly site with an environmental gradient from hill top to bottom. Diameter at breast height （DBH） and tree height data had significant spatial auto-correlations among rows and columns. Adding a firstorder separable autoregressive term more effectively modelled the spatial variation than did the incomplete block （IB） model used for the experimental design. The spatial model also accounted for effects of experimental design factors and greatly reduced residual variances. The spatial analysis rel- ative to the IB analysis improved estimation of genetic parameters with the residual variance reduced 13 and 19% for DBH and tree height, respectively; heritability increased 35 and 51% for DBH and tree height, respectively; and genetic gain improved 3-5%. Fitting global trend and postblocking did not improve the analyses under IB model. The use of a spatial model or combined with a design model is recommended for forest genetic trials, particularly with global trend and local spatial variation of hilly sites.
文摘This research aims to find out the key attributes influencing the user trust towards applications on the mobile application store. In this research, both the experimental data set and the evaluation results of analysis are described. The analysis results include the test results of analysis of variance （ANOVA） and correlation analysis. In ANOVA, the attributes affecting user rating are derived and applied to the correlation analysis to evaluate the degree of correlation towards user rating, and in the last stage the positive or negative relationship with user satisfaction is figured out.
文摘The article considers the impact of forestry machines on the soil of the cutting areas and presents the results of the impact of harvesters of different classes(middlesmall,middle and heavy)and configurations of wheeled equipment and additional equipment on the soil of the cutting areas in the conditions of Kronoberg County(South of Sweden).Methods to reduce negative impact of wheeled harvesters on the soil of forests are proposed.The aim of the research is to assess the effect of the structural parameters of the wheel harvesters of different class on the soil of the cutting areas.Wheeled harvesters were loaded with 60 kN force.The results of experimental studies of the impact of wheeled harvesters on the forest soil are presented.Recommendations on the possibility of testing the results of research in the conditions of the rental base of the Western part of the North-Western Federal District of the Russian Federation are given.
