To improve the understanding of the transport mechanism in shale gas reservoirs and build a theoretical basic for further researches on productivity evaluation and efficient exploitation, various gas transport mechani...To improve the understanding of the transport mechanism in shale gas reservoirs and build a theoretical basic for further researches on productivity evaluation and efficient exploitation, various gas transport mechanisms within a shale gas reservoir exploited by a horizontal well were thoroughly investigated, which took diffusion, adsorption/desorption and Darcy flow into account. The characteristics of diffusion in nano-scale pores in matrix and desorption on the matrix surface were both considered in the improved differential equations for seepage flow. By integrating the Langmuir isotherm desorption items into the new total dimensionless compression coefficient in matrix, the transport function and seepage flow could be formalized, simplified and consistent with the conventional form of diffusion equation. Furthermore, by utilizing the Laplace change and Sethfest inversion changes, the calculated results were obtained and further discussions indicated that transfer mechanisms were influenced by diffusion, adsorption/desorption. The research shows that when the matrix permeability is closed to magnitude of 10^-9D, the matrix flow only occurs near the surfacial matrix; as to the actual production, the central matrix blocks are barely involved in the production; the closer to the surface of matrix, the lower the pressure is and the more obvious the diffusion effect is; the behavior of adsorption/desorption can increase the matrix flow rate significantly and slow down the pressure of horizontal well obviously.展开更多
Fuel cell stacks as the automotive power source can be severely poisoned by a trace amount of NOx in atmosphere,which makes it necessary to provide clean air for fuel cell vehicles.In this work,activating commercial a...Fuel cell stacks as the automotive power source can be severely poisoned by a trace amount of NOx in atmosphere,which makes it necessary to provide clean air for fuel cell vehicles.In this work,activating commercial activated carbons with K2CO3 for the large enhancement of NO capture was studied.K2CO3 modified activated carbons(K2CO3 ACs)were prepared by impregnating activate carbons in K2CO3 solution under ultrasound treatment,followed by temperature programmed baking at 800 oC.The dynamic NO flow tests on K2CO3 ACs at room temperature indicated that NO adsorption capacity reached the maximum(96 mg/g)when K2CO3 loading was 19.5 wt%,which corresponded to a specific surface area of 1196.1 m2/g and total pore volume of 0.70 cm3/g.The ten-fold enhancement of NO adsorption on K2CO3 ACs compared to the unimpregnated activated carbon was mainly attributed to the formation of potassium nitrite,which was confirmed by FTIR and temperature programmed desorption measurements.Regeneration tests of NO adsorption on the optimum sample revealed that 76%of the NO adsorption capacity could be remained after the fourth cycle.展开更多
The adsorption capability of D318 resin for Cr（Ⅵ） was investigated by chemistry analysis. Experimental results show that D318 resin has the best adsorption ability for Cr（Ⅵ） at pH=3.16 in HAc-NaAc medium. The st...The adsorption capability of D318 resin for Cr（Ⅵ） was investigated by chemistry analysis. Experimental results show that D318 resin has the best adsorption ability for Cr（Ⅵ） at pH=3.16 in HAc-NaAc medium. The statically saturated adsorption capacity of the resin is 265.4 mg/g. The thermodynamic adsorption parameters, enthalpy change AH and free energy change AG298 of the adsorption reaction are 4.81 and -5.16 kJ/mol, respectively. The apparent activation energy Ea is 22.4 kJ/mol. The adsorption behavior obeys the Freundlich isotherm. The molar coordination ratio of the functional group of resin to Cr（Ⅵ） is 3：2. Cr（Ⅵ） adsorbed on D318 resin can be eluted by 5%NaOH-5%NaCl quantitatively.展开更多
The article is based on a research on the adsorption behavior and adsorption mechanism of macroporous phosphonic acid resin (PAR) for Lu 3+ and the influence of the medium’s pH, adsorption temperature, adsorption tim...The article is based on a research on the adsorption behavior and adsorption mechanism of macroporous phosphonic acid resin (PAR) for Lu 3+ and the influence of the medium’s pH, adsorption temperature, adsorption time, etc on adsorbing Lu 3+ . The best value of medium’s pH to the adsorption of PAR for Lu 3+ was found to be 4.92. The static adsorption maximum capacity of PAR for Lu 3+ is 220?mg·g -1 . The thermodynamic adsorption parameters are respectively ΔH=11.3?kJ·mol -1 , ΔS=46.3?J·mol -1 ·K -1 , ΔG=-2.50?kJ·mol -1 and the apparent activity energy is E_a=31.4?kJ·mol -1 . The adsorption behavior of PAR for Lu 3+ obeys the Freundlich isotherm. The apparent adsorption rate constant is k_ 298 =4.68 ×10 -5 ?s -1 . The coordinate ratio of the functional radical to Lu 3+ is approximately 4∶1. The best eluant is 1.0?mol·L -1 HCl. The adsorption mechanism of PAR for Lu 3+ was separately confirmed by chemical analysis and IR spectra.展开更多
A low-cost adsorbent modified kaolin clay(MKC) was synthesized and utilized for Cr(VI) removal from aqueous solution. Adsorption experiments were carried out as a function of adsorbent dosage, solution pH, Cr(VI) mass...A low-cost adsorbent modified kaolin clay(MKC) was synthesized and utilized for Cr(VI) removal from aqueous solution. Adsorption experiments were carried out as a function of adsorbent dosage, solution pH, Cr(VI) mass concentration, contact time, electrolyte, and temperature. It is found that the adsorption efficiency is high within a wide pH range of 2.5-11.5, and equilibrium is achieved within 180 min. Increases in temperature and electrolyte concentration decrease the adsorption. The adsorption follows the pseudo-second-order kinetic model. The Langmuir isotherm shows better fit than Freundlich isotherm. The maximum uptake capacities calculated from the Langmuir model are 15.82, 15.55 and 15.22 mg/g at 298, 308 and 318 K, respectively. Thermodynamic parameters reveals the spontaneous and exothermic nature of the adsorption. The FTIR study indicates that hydroxyl groups, NH4+ ions and NO3- ions on MKC surface play a key role in Cr(VI) adsorption. The Cr(VI) desorbability of 86.53% is achieved at a Na2CO3 solution. The results show that MKC is suitable as a low-cost adsorbent for Cr(VI) removal which has higher adsorption capacity and faster adsorption rate at pH close to that where pollutants are usually found in the environment.展开更多
A novel chelating resin with sulfonic group was synthesized by chemical modification of D401 resin with sulphonation reaction and characterized by FT-IR spectrometry. The adsorption properties of the novel chelating r...A novel chelating resin with sulfonic group was synthesized by chemical modification of D401 resin with sulphonation reaction and characterized by FT-IR spectrometry. The adsorption properties of the novel chelating resin for Pb2+ were studied by batch adsorption, and the adsorption process was analyzed from thermodynamics and kinetics aspects. The adsorption mechanism of Pb2+ on the modified D401 chelating resin was discussed by FT-IR spectrometry. Experimental results show that in the Pb2+ concentration range of 200-400 mg/L, the adsorption capacities of the modified D401 chelating resin for Pb2+ increase by 77%-129%, and Langmuir isothermal adsorption model is more suitable for the equilibrium adsorption data. Adsorption is an endothermic process that runs spontaneously. Kinetic analysis shows that the adsorption rate is mainly governed by liquid film diffusion. The best pH value under adsorption condition is 4-5. The saturated resin can be regenerated by 3 mol/L nitric acid, and the adsorption capacity remains stable after five consecutive adsorption-desorption cycles. The maximal static saturated adsorption capacity of the resin is 206 mg/g at 333 K in the Pb2+ concentration range of 200-400 mg/L. The modified D401 chelating resin is an efficient adsorbent for the removal of Pb2+ from its single-metal ion solution.展开更多
质谱成像技术是质谱法与成像技术的结合,一种将质谱信号通过成像软件转化为具有空间分布特征可视化图像的技术。近年来,质谱成像技术广泛用于植物组织代谢物分析,为中药药用植物研究提供新思路、新方法。从3个部分进行综述,首先对基质...质谱成像技术是质谱法与成像技术的结合,一种将质谱信号通过成像软件转化为具有空间分布特征可视化图像的技术。近年来,质谱成像技术广泛用于植物组织代谢物分析,为中药药用植物研究提供新思路、新方法。从3个部分进行综述,首先对基质辅助激光解吸电离质谱成像(Matrix-assisted laser desorption ionization mass spectrometry imaging,MADLI)技术、二次离子质谱成像(Secondary ion mass spectrometry imaging,SIMS)技术、解吸电喷雾电离质谱成像(Desorption electrospray ionization-mass spectrometry imaging,DESI)技术和纳米结构引发质谱成像(Nanostructure-initiator mass spectrometry imaging,NIMS)技术原理进行概述;其次,综述质谱成像技术在中药药用植物代谢物可视化分析、鉴定及有效成分生物合成路径等方面应用实例;最后,总结质谱成像技术的优势和局限,并进一步展望质谱成像技术在药用植物方面的应用。展开更多
基金Foundation item： Project（PLN1129）supported by Opening Fund of State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation （Southwest Petroleum University）, China
文摘To improve the understanding of the transport mechanism in shale gas reservoirs and build a theoretical basic for further researches on productivity evaluation and efficient exploitation, various gas transport mechanisms within a shale gas reservoir exploited by a horizontal well were thoroughly investigated, which took diffusion, adsorption/desorption and Darcy flow into account. The characteristics of diffusion in nano-scale pores in matrix and desorption on the matrix surface were both considered in the improved differential equations for seepage flow. By integrating the Langmuir isotherm desorption items into the new total dimensionless compression coefficient in matrix, the transport function and seepage flow could be formalized, simplified and consistent with the conventional form of diffusion equation. Furthermore, by utilizing the Laplace change and Sethfest inversion changes, the calculated results were obtained and further discussions indicated that transfer mechanisms were influenced by diffusion, adsorption/desorption. The research shows that when the matrix permeability is closed to magnitude of 10^-9D, the matrix flow only occurs near the surfacial matrix; as to the actual production, the central matrix blocks are barely involved in the production; the closer to the surface of matrix, the lower the pressure is and the more obvious the diffusion effect is; the behavior of adsorption/desorption can increase the matrix flow rate significantly and slow down the pressure of horizontal well obviously.
基金Project(2018YFB0105303)supported by the Ministry of Science and Technology of ChinaProject(17DZ1200702)supported by the Shanghai Science and Technology Committee,China
文摘Fuel cell stacks as the automotive power source can be severely poisoned by a trace amount of NOx in atmosphere,which makes it necessary to provide clean air for fuel cell vehicles.In this work,activating commercial activated carbons with K2CO3 for the large enhancement of NO capture was studied.K2CO3 modified activated carbons(K2CO3 ACs)were prepared by impregnating activate carbons in K2CO3 solution under ultrasound treatment,followed by temperature programmed baking at 800 oC.The dynamic NO flow tests on K2CO3 ACs at room temperature indicated that NO adsorption capacity reached the maximum(96 mg/g)when K2CO3 loading was 19.5 wt%,which corresponded to a specific surface area of 1196.1 m2/g and total pore volume of 0.70 cm3/g.The ten-fold enhancement of NO adsorption on K2CO3 ACs compared to the unimpregnated activated carbon was mainly attributed to the formation of potassium nitrite,which was confirmed by FTIR and temperature programmed desorption measurements.Regeneration tests of NO adsorption on the optimum sample revealed that 76%of the NO adsorption capacity could be remained after the fourth cycle.
基金Project (Y304121) supported by the Natural Science Foundation of Zhejiang Province,China
文摘The adsorption capability of D318 resin for Cr（Ⅵ） was investigated by chemistry analysis. Experimental results show that D318 resin has the best adsorption ability for Cr（Ⅵ） at pH=3.16 in HAc-NaAc medium. The statically saturated adsorption capacity of the resin is 265.4 mg/g. The thermodynamic adsorption parameters, enthalpy change AH and free energy change AG298 of the adsorption reaction are 4.81 and -5.16 kJ/mol, respectively. The apparent activation energy Ea is 22.4 kJ/mol. The adsorption behavior obeys the Freundlich isotherm. The molar coordination ratio of the functional group of resin to Cr（Ⅵ） is 3：2. Cr（Ⅵ） adsorbed on D318 resin can be eluted by 5%NaOH-5%NaCl quantitatively.
文摘The article is based on a research on the adsorption behavior and adsorption mechanism of macroporous phosphonic acid resin (PAR) for Lu 3+ and the influence of the medium’s pH, adsorption temperature, adsorption time, etc on adsorbing Lu 3+ . The best value of medium’s pH to the adsorption of PAR for Lu 3+ was found to be 4.92. The static adsorption maximum capacity of PAR for Lu 3+ is 220?mg·g -1 . The thermodynamic adsorption parameters are respectively ΔH=11.3?kJ·mol -1 , ΔS=46.3?J·mol -1 ·K -1 , ΔG=-2.50?kJ·mol -1 and the apparent activity energy is E_a=31.4?kJ·mol -1 . The adsorption behavior of PAR for Lu 3+ obeys the Freundlich isotherm. The apparent adsorption rate constant is k_ 298 =4.68 ×10 -5 ?s -1 . The coordinate ratio of the functional radical to Lu 3+ is approximately 4∶1. The best eluant is 1.0?mol·L -1 HCl. The adsorption mechanism of PAR for Lu 3+ was separately confirmed by chemical analysis and IR spectra.
基金Project(2012BAJ24B03)supported by the National Science and Technology Support Program of China
文摘A low-cost adsorbent modified kaolin clay(MKC) was synthesized and utilized for Cr(VI) removal from aqueous solution. Adsorption experiments were carried out as a function of adsorbent dosage, solution pH, Cr(VI) mass concentration, contact time, electrolyte, and temperature. It is found that the adsorption efficiency is high within a wide pH range of 2.5-11.5, and equilibrium is achieved within 180 min. Increases in temperature and electrolyte concentration decrease the adsorption. The adsorption follows the pseudo-second-order kinetic model. The Langmuir isotherm shows better fit than Freundlich isotherm. The maximum uptake capacities calculated from the Langmuir model are 15.82, 15.55 and 15.22 mg/g at 298, 308 and 318 K, respectively. Thermodynamic parameters reveals the spontaneous and exothermic nature of the adsorption. The FTIR study indicates that hydroxyl groups, NH4+ ions and NO3- ions on MKC surface play a key role in Cr(VI) adsorption. The Cr(VI) desorbability of 86.53% is achieved at a Na2CO3 solution. The results show that MKC is suitable as a low-cost adsorbent for Cr(VI) removal which has higher adsorption capacity and faster adsorption rate at pH close to that where pollutants are usually found in the environment.
基金Project(708049) supported by the Important Item Cultivation Foundation of Scientific Innovation Project of Colleges and Universities of China
文摘A novel chelating resin with sulfonic group was synthesized by chemical modification of D401 resin with sulphonation reaction and characterized by FT-IR spectrometry. The adsorption properties of the novel chelating resin for Pb2+ were studied by batch adsorption, and the adsorption process was analyzed from thermodynamics and kinetics aspects. The adsorption mechanism of Pb2+ on the modified D401 chelating resin was discussed by FT-IR spectrometry. Experimental results show that in the Pb2+ concentration range of 200-400 mg/L, the adsorption capacities of the modified D401 chelating resin for Pb2+ increase by 77%-129%, and Langmuir isothermal adsorption model is more suitable for the equilibrium adsorption data. Adsorption is an endothermic process that runs spontaneously. Kinetic analysis shows that the adsorption rate is mainly governed by liquid film diffusion. The best pH value under adsorption condition is 4-5. The saturated resin can be regenerated by 3 mol/L nitric acid, and the adsorption capacity remains stable after five consecutive adsorption-desorption cycles. The maximal static saturated adsorption capacity of the resin is 206 mg/g at 333 K in the Pb2+ concentration range of 200-400 mg/L. The modified D401 chelating resin is an efficient adsorbent for the removal of Pb2+ from its single-metal ion solution.
文摘质谱成像技术是质谱法与成像技术的结合,一种将质谱信号通过成像软件转化为具有空间分布特征可视化图像的技术。近年来,质谱成像技术广泛用于植物组织代谢物分析,为中药药用植物研究提供新思路、新方法。从3个部分进行综述,首先对基质辅助激光解吸电离质谱成像(Matrix-assisted laser desorption ionization mass spectrometry imaging,MADLI)技术、二次离子质谱成像(Secondary ion mass spectrometry imaging,SIMS)技术、解吸电喷雾电离质谱成像(Desorption electrospray ionization-mass spectrometry imaging,DESI)技术和纳米结构引发质谱成像(Nanostructure-initiator mass spectrometry imaging,NIMS)技术原理进行概述;其次,综述质谱成像技术在中药药用植物代谢物可视化分析、鉴定及有效成分生物合成路径等方面应用实例;最后,总结质谱成像技术的优势和局限,并进一步展望质谱成像技术在药用植物方面的应用。
