An optimized transducer prototype with a sandwich structure vibrated longitudinally is proposed for a transmitter in acoustic logging, especially in acoustic logging while drilling, 5y taking account of drilling envir...An optimized transducer prototype with a sandwich structure vibrated longitudinally is proposed for a transmitter in acoustic logging, especially in acoustic logging while drilling, 5y taking account of drilling environments with high temperature and pressure, as well as strong collar drilling vibration during the drilling process. Aimed to improve the transmitting performance, numerical and experimental studies for the transducer optimization are conducted. The impact of location and length of the piezoelectric stack on resonance characteristics arid effective electromeehanical coupling coefficient is calculated and analyzed. Admittance and transmitting performance of the proposed transducer are measured in laboratory experiments, and the results are compared with simulated ones. It is shown that the newly proposed transducer has higher transmitting performance with lower resonance frequencies. This work provides theoretical and experimental bases for transducer designing and acoustic wave measurements in acoustic logging, especially in acoustic logging while drilling.展开更多
When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI （Horizontal Transve...When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI （Horizontal Transverse Isotropy） formation can be determined. The method of calculating the fast and slow wave data when a shear wave propagates along the borehole axis in anisotropic formation was analyzed, and the implementation of a cross-dipole acoustic logging tool was demonstrated. The tool was composed of transmitter electronics, transmitter mandrel, acoustic isolator, receiver mandrel and main control electronics. Sonde, transmitter circuit, signal receiving and processing circuit, data acquisition system, system control circuit and telemetry interface circuit were presented and analyzed. The test model was used in production wells and standard wells in various areas and the four-component cross-dipole waves were acquired and processed. The waves had good signal-to-noise ratio and clear characteristics, and the fast and slow waveforms, processed slowness curves, anisotropy and fast shear wave azimuth well matched with each other.展开更多
Shale acoustic logging response law is complex due to the multiple minerals and pores,which limits the application of acoustic logging in shale reservoir parameter evaluation,therefore clarifying the shale acoustic lo...Shale acoustic logging response law is complex due to the multiple minerals and pores,which limits the application of acoustic logging in shale reservoir parameter evaluation,therefore clarifying the shale acoustic logging response law is of great importance.Different petrophysical models are adopted for the equivalence of organic matter,clay,matrix minerals,and fractures,in Wufeng-Longmaxi shale formation in the Jiaoshiba area.Finally,the self-consistent approximation model is used to combine different components,and a shale petrophysical model with a complex pore structure is constructed.The model verification results show it has good predictability for shale.Based on the model,the effect of different mineral compositions and different types of pores are studied.The results show that:1)The effect of clay and organic matter is very complex,and the variation laws of layered clay(organic matter)and dispersed clay(organic matter)on the acoustic wave are consistent.2)Layered clay or organic matter leads to the formation anisotropy increase,which makes the acoustic time difference greater than that of containing dispersed clay(organic matter).3)The fracture is the main control factor of anisotropy,and the anisotropy of gas-bearing fracture is higher than that of water/oil fracture.展开更多
This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test eq...This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test equipment, we have used principal and subordinate structures, and interconnected the host computer and the front-end machine via Ethernet. The front-end machine is based on the ARM7 （advanced reduced instruction set computing （RISC） machine） technique, the processor of which runs an embedded operating system, namely, uClinux OS. We have analyzed the system telecommunication, human-machine interface circuit, transmitter mandrel interface circuit, receiver mandrel interface circuit, and board-level test interface circuit. The software used in the system consists of the embedded front-computer software and the host application software. We have explained in detail the flow chart of the boot loader in the embedded front-computer software. The host application software is composed of four application subroutines, which match with the functional modules of the system hardware. A net communication program based on the server^client mode is implemented by means of socket programming and multi-thread programming. Test results indicate that the data transmission rate of the system is higher than 1 MB/s, which completely meets the current requirements of the data transmission rate between the tool system and the wireline telemetry device. Application of the debugging system, which includes multiple level test methods, shows that the proposed system can fully meet the test requirements of MPAL at various levels.展开更多
The existing acoustic logging methods for evaluating the hydraulic fracturing effectiveness usually use the fracture density to evaluate the fracture volume, and the results often cannot accurately reflect the actual ...The existing acoustic logging methods for evaluating the hydraulic fracturing effectiveness usually use the fracture density to evaluate the fracture volume, and the results often cannot accurately reflect the actual productivity. This paper studies the dynamic fluid flow through hydraulic fractures and its effect on borehole acoustic waves. Firstly, based on the fractal characteristics of fractures observed in hydraulic fracturing experiments, a permeability model of complex fracture network is established. Combining the dynamic fluid flow response of the model with the Biot-Rosenbaum theory that describes the acoustic wave propagation in permeable formations, the influence of hydraulic fractures on the velocity dispersion of borehole Stoneley-wave is then calculated and analyzed, whereby a novel hydraulic fracture fluid transport property evaluation method is proposed. The results show that the Stoneley-wave velocity dispersion characteristics caused by complex fractures can be equivalent to those of the plane fracture model, provided that the average permeability of the complex fracture model is equal to the permeability of the plane fracture. In addition, for fractures under high-permeability(fracture width 10~100 μm, permeability ~100 μm^(2)) and reduced permeability(1~10 μm, ~10 μm^(2), as in fracture closure) conditions, the Stoneley-wave velocity dispersion characteristics are significantly different. The field application shows that this fluid transport property evaluation method is practical to assess the permeability and the connectivity of hydraulic fractures.展开更多
Tool waves, also named collar waves, propagating along the drill collars in acoustic logging while drilling （ALWD）, strongly interfere with the needed P- and S-waves of a penetrated formation, which is a key issue i...Tool waves, also named collar waves, propagating along the drill collars in acoustic logging while drilling （ALWD）, strongly interfere with the needed P- and S-waves of a penetrated formation, which is a key issue in picking up formation P- and S-wave velocities. Previous studies on physical insulation for the collar waves designed on the collar between the source and the receiver sections did not bring to a satisfactory solution. In this paper, we investigate the propagation features of collar waves in different models. It is confirmed that there exists an indirect collar wave in the synthetic full waves due to the coupling between the drill collar and the borehole, even there is a perfect isolator between the source and the receiver. The direct collar waves propagating all along the tool and the indirect ones produced by echoes from the borehole wall are summarized as the generalized collar waves. Further analyses show that the indirect collar waves could be relatively strong in the full wave data. This is why the collar waves cannot be eliminated with satisfactory effect in many cases by designing the physical isolators carved on the tool.展开更多
It is desirable to develop new signal processing techniques for effectively extracting reflected waves under the strong interferences of borehole guided waves. We presented a multi-scale semblance method for the separ...It is desirable to develop new signal processing techniques for effectively extracting reflected waves under the strong interferences of borehole guided waves. We presented a multi-scale semblance method for the separation and velocity （slowness） analysis of the reflected waves and guided waves in borehole acoustic logging. It was specially designed for the newly developed tools with ultra-long source- receiver spacing for acoustic reflection survey. This new method was a combination of the dual tree com- plex wavelets transform （DT-CWT） and the slowness travel time coherence （STC） method. Applications to the 3D finite difference （FD） modeling simulated data and to the field array sonic waveform signals have demonstrated the ability of this method to appropriately extract the reflected waves under severe interference from the guided waves and to suppress noise in the time-frequency domain.展开更多
Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteri...Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteristics and attenuation coefficient.By designing an appropriate vector filter,phase velocity,attenuation coefficient and amplitude can be inverted from the waveform recorded by the receiver array.Performance analysis of this algorithm is compared with Extended Prony Method(EPM)and Forward and Backward Matrix Pencil(FBMP)method.Based on the analysis results,the proposed method is capable of achieving high resolution and precision as the parametric spectrum estimation methods.At the meantime,it also keeps high stability as the other nonparametric spectrum estimation methods.At last,applications to synthetic waveforms modeled using finite difference method and real data show its efficiency.The real data processing results show that the P-wave attenuation log is more sensitive to oil formation compared to S-wave;and the S-wave attenuation log is more sensitive to shale formation compared to P-wave.展开更多
We developed a parallelized scheme of 3D finite difference （3DFD）with non-oniform staggered grid to simulate the eccentric borehole acoustic field with side-wall acoustic logging tools in open and cased wells. Highe...We developed a parallelized scheme of 3D finite difference （3DFD）with non-oniform staggered grid to simulate the eccentric borehole acoustic field with side-wall acoustic logging tools in open and cased wells. Higher accuracy and lower computation cost were achieved with this scheme for modeling such an asymmetric wave field generated by a high frequency source near or on the borehole wall. We also modeled the cases with and without considering the effects of the tool body. The simulation results demonstrated that the logging tool body would attenuate the direct waves but have only little influence on the interface waves in such a borehole condition. The effects of the tool body on the wave field were significant only when the contrast of the elastic properties between tool body and borehole fluid was large.展开更多
The acoustic tools widely used in borehole well logging and being developed in borehole acoustic reflection imaging do not have the function of azimuthal measurement due to a symmetric source, so they can not be used ...The acoustic tools widely used in borehole well logging and being developed in borehole acoustic reflection imaging do not have the function of azimuthal measurement due to a symmetric source, so they can not be used to evaluate the azimuthal character of borehole formation. In this paper, a 3D finite difference method was used to simulate the acoustic fields in a fluid-filled borehole generated by a traditional monopole source and a phased arc array. Acoustic waveforms were presented for both cases. The analysis of the simulated waveforms showed that different from the monopole source, the acoustic energy generated by the phased arc array transmitter mainly radiated to the borehole in a narrow azimuthal range, which was the key technique to implement azimuthal acoustic well logging. Similar to the monopole source, the waveforms generated by the phased arc array in the fluid-filled borehole also contain compressional （P） waves and shear （S） waves refracted along the borehole, which is the theoretical foundation of phased arc array acoustic well logging.展开更多
Acoustic waves enter a rock formation from a borehole and are reflected or scattered upon encountering a geologic structure.Consequently,we obtain the structure location represented by the azimuth and distance from th...Acoustic waves enter a rock formation from a borehole and are reflected or scattered upon encountering a geologic structure.Consequently,we obtain the structure location represented by the azimuth and distance from the borehole using the acoustic reflection or scattering.Downhole acoustic measurements with the azimuthal resolution are realized using an azimuthal acoustic receiver sonde composed of several arcuate phased array receivers.Eight sensors distributed evenly across the arcuate phased array receiver can record acoustic waves independently;this allows us to adopt the beamforming method.We use a supporting logging tool to conduct the downhole test in two adjacent fluid-filled boreholes,for validating the evaluation of the geologic structure using scattered P-waves.The test results show the multi-azimuth images of the target borehole and the azimuthal variation in scattering amplitudes.Thus,we obtain the precise location of the target borehole.Furthermore,the measured values of the target borehole are consistent with the actual values,indicating that we can accurately evaluate a near-borehole geologic structure with scattered P-waves.展开更多
In oil and gas exploitation,cluster well technology can significantly reduce costs and improve efficiency.An effective adjacent well detection method can greatly reduce the risk of collision between adjacent wells.Thi...In oil and gas exploitation,cluster well technology can significantly reduce costs and improve efficiency.An effective adjacent well detection method can greatly reduce the risk of collision between adjacent wells.This study proposes a method to invert the 3D trajectory of an adjacent well using a scattered P-wave obtained by borehole azimuthal acoustic reflection imaging.After obtaining the scattered P-wave from the raw data of the target well using the wave field separation technology,the waveform data in an imaging profile can be obtained by the downhole acoustic directional reception technology.Migration imaging technology is then used to obtain the image of the formation in the imaging profile.Subsequently,by analyzing the images of the formation in the imaging profile of the different azimuths,the well spacing and azimuth of the target well can be determined.Finally,the 3D trajectory of the target well can be obtained by solving the inversion equation.This method was validated by processing the field data from a deviated well in a deep formation.The comparison of the inversion and actual trajectories of the target well demonstrated that the maximum deviation of the inversion trajectory is 0.9 m in the north-south direction,0.78 m in the east-west direction,1.45 m in the well spacing,and 2.48°in the azimuth.The field data inversion result demonstrated that the method can effectively use the azimuth reflection acoustic data to invert the 3D trajectory of an adjacent well,which indicates that the borehole azimuthal acoustic reflection imaging technology has great potential within the context of adjacent well detection.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 41474160 and 11304347
文摘An optimized transducer prototype with a sandwich structure vibrated longitudinally is proposed for a transmitter in acoustic logging, especially in acoustic logging while drilling, 5y taking account of drilling environments with high temperature and pressure, as well as strong collar drilling vibration during the drilling process. Aimed to improve the transmitting performance, numerical and experimental studies for the transducer optimization are conducted. The impact of location and length of the piezoelectric stack on resonance characteristics arid effective electromeehanical coupling coefficient is calculated and analyzed. Admittance and transmitting performance of the proposed transducer are measured in laboratory experiments, and the results are compared with simulated ones. It is shown that the newly proposed transducer has higher transmitting performance with lower resonance frequencies. This work provides theoretical and experimental bases for transducer designing and acoustic wave measurements in acoustic logging, especially in acoustic logging while drilling.
文摘When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI （Horizontal Transverse Isotropy） formation can be determined. The method of calculating the fast and slow wave data when a shear wave propagates along the borehole axis in anisotropic formation was analyzed, and the implementation of a cross-dipole acoustic logging tool was demonstrated. The tool was composed of transmitter electronics, transmitter mandrel, acoustic isolator, receiver mandrel and main control electronics. Sonde, transmitter circuit, signal receiving and processing circuit, data acquisition system, system control circuit and telemetry interface circuit were presented and analyzed. The test model was used in production wells and standard wells in various areas and the four-component cross-dipole waves were acquired and processed. The waves had good signal-to-noise ratio and clear characteristics, and the fast and slow waveforms, processed slowness curves, anisotropy and fast shear wave azimuth well matched with each other.
基金financially supported by the National Natural Science Foundation of China(NSFC)Basic Research Program on Deep Petroleum Resource Accumulation and Key Engineering Technologies(Grant No.U19B6003-04-03-03)The Key Project of Sinopec Ministry of Science and Technology(Grant No.PE19012-1)the National Research Council of Science and Technology Major Project(Grant No.2016ZX05060-001-012)。
文摘Shale acoustic logging response law is complex due to the multiple minerals and pores,which limits the application of acoustic logging in shale reservoir parameter evaluation,therefore clarifying the shale acoustic logging response law is of great importance.Different petrophysical models are adopted for the equivalence of organic matter,clay,matrix minerals,and fractures,in Wufeng-Longmaxi shale formation in the Jiaoshiba area.Finally,the self-consistent approximation model is used to combine different components,and a shale petrophysical model with a complex pore structure is constructed.The model verification results show it has good predictability for shale.Based on the model,the effect of different mineral compositions and different types of pores are studied.The results show that:1)The effect of clay and organic matter is very complex,and the variation laws of layered clay(organic matter)and dispersed clay(organic matter)on the acoustic wave are consistent.2)Layered clay or organic matter leads to the formation anisotropy increase,which makes the acoustic time difference greater than that of containing dispersed clay(organic matter).3)The fracture is the main control factor of anisotropy,and the anisotropy of gas-bearing fracture is higher than that of water/oil fracture.
基金supported by National Science Foundation of China (61102102, 11134011, 11204380 and 11374371)Major National Science and Technology Projects (2011ZX05020-002)+2 种基金PetroChina Innovation Foundation (2014D-5006-0307)Science and Technology Project of CNPC (2014A-3912 and 2011B-4001)the Foundation of China University of Petroleum (KYJJ2012-05-07)
文摘This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test equipment, we have used principal and subordinate structures, and interconnected the host computer and the front-end machine via Ethernet. The front-end machine is based on the ARM7 （advanced reduced instruction set computing （RISC） machine） technique, the processor of which runs an embedded operating system, namely, uClinux OS. We have analyzed the system telecommunication, human-machine interface circuit, transmitter mandrel interface circuit, receiver mandrel interface circuit, and board-level test interface circuit. The software used in the system consists of the embedded front-computer software and the host application software. We have explained in detail the flow chart of the boot loader in the embedded front-computer software. The host application software is composed of four application subroutines, which match with the functional modules of the system hardware. A net communication program based on the server^client mode is implemented by means of socket programming and multi-thread programming. Test results indicate that the data transmission rate of the system is higher than 1 MB/s, which completely meets the current requirements of the data transmission rate between the tool system and the wireline telemetry device. Application of the debugging system, which includes multiple level test methods, shows that the proposed system can fully meet the test requirements of MPAL at various levels.
基金Supported by the National Natural Science Foundation of China (41821002,42174145)PetroChina Science and Technology Major Project (ZD2019-183-004)China University of Petroleum (East China) Graduate Student Innovation Project (YCX2019001)。
文摘The existing acoustic logging methods for evaluating the hydraulic fracturing effectiveness usually use the fracture density to evaluate the fracture volume, and the results often cannot accurately reflect the actual productivity. This paper studies the dynamic fluid flow through hydraulic fractures and its effect on borehole acoustic waves. Firstly, based on the fractal characteristics of fractures observed in hydraulic fracturing experiments, a permeability model of complex fracture network is established. Combining the dynamic fluid flow response of the model with the Biot-Rosenbaum theory that describes the acoustic wave propagation in permeable formations, the influence of hydraulic fractures on the velocity dispersion of borehole Stoneley-wave is then calculated and analyzed, whereby a novel hydraulic fracture fluid transport property evaluation method is proposed. The results show that the Stoneley-wave velocity dispersion characteristics caused by complex fractures can be equivalent to those of the plane fracture model, provided that the average permeability of the complex fracture model is equal to the permeability of the plane fracture. In addition, for fractures under high-permeability(fracture width 10~100 μm, permeability ~100 μm^(2)) and reduced permeability(1~10 μm, ~10 μm^(2), as in fracture closure) conditions, the Stoneley-wave velocity dispersion characteristics are significantly different. The field application shows that this fluid transport property evaluation method is practical to assess the permeability and the connectivity of hydraulic fractures.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11134011 and 11374322)the Foresight Research Project,Institute of Acoustics,Chinese Academy of Sciences
文摘Tool waves, also named collar waves, propagating along the drill collars in acoustic logging while drilling （ALWD）, strongly interfere with the needed P- and S-waves of a penetrated formation, which is a key issue in picking up formation P- and S-wave velocities. Previous studies on physical insulation for the collar waves designed on the collar between the source and the receiver sections did not bring to a satisfactory solution. In this paper, we investigate the propagation features of collar waves in different models. It is confirmed that there exists an indirect collar wave in the synthetic full waves due to the coupling between the drill collar and the borehole, even there is a perfect isolator between the source and the receiver. The direct collar waves propagating all along the tool and the indirect ones produced by echoes from the borehole wall are summarized as the generalized collar waves. Further analyses show that the indirect collar waves could be relatively strong in the full wave data. This is why the collar waves cannot be eliminated with satisfactory effect in many cases by designing the physical isolators carved on the tool.
基金National Natural Science Foundation of China (the project No.is 50674098)the National 863 Project of China (Grant 2006AA06Z207)theNational Basic Research Program of China (973 Program,2007CB209601).
文摘It is desirable to develop new signal processing techniques for effectively extracting reflected waves under the strong interferences of borehole guided waves. We presented a multi-scale semblance method for the separation and velocity （slowness） analysis of the reflected waves and guided waves in borehole acoustic logging. It was specially designed for the newly developed tools with ultra-long source- receiver spacing for acoustic reflection survey. This new method was a combination of the dual tree com- plex wavelets transform （DT-CWT） and the slowness travel time coherence （STC） method. Applications to the 3D finite difference （FD） modeling simulated data and to the field array sonic waveform signals have demonstrated the ability of this method to appropriately extract the reflected waves under severe interference from the guided waves and to suppress noise in the time-frequency domain.
基金This research was supported by the National Natural Science Foundation of China(No.42274141)Science Foundation of China University of Petroleum,Beijing(No.2462020YXZZ007).
文摘Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteristics and attenuation coefficient.By designing an appropriate vector filter,phase velocity,attenuation coefficient and amplitude can be inverted from the waveform recorded by the receiver array.Performance analysis of this algorithm is compared with Extended Prony Method(EPM)and Forward and Backward Matrix Pencil(FBMP)method.Based on the analysis results,the proposed method is capable of achieving high resolution and precision as the parametric spectrum estimation methods.At the meantime,it also keeps high stability as the other nonparametric spectrum estimation methods.At last,applications to synthetic waveforms modeled using finite difference method and real data show its efficiency.The real data processing results show that the P-wave attenuation log is more sensitive to oil formation compared to S-wave;and the S-wave attenuation log is more sensitive to shale formation compared to P-wave.
文摘We developed a parallelized scheme of 3D finite difference （3DFD）with non-oniform staggered grid to simulate the eccentric borehole acoustic field with side-wall acoustic logging tools in open and cased wells. Higher accuracy and lower computation cost were achieved with this scheme for modeling such an asymmetric wave field generated by a high frequency source near or on the borehole wall. We also modeled the cases with and without considering the effects of the tool body. The simulation results demonstrated that the logging tool body would attenuate the direct waves but have only little influence on the interface waves in such a borehole condition. The effects of the tool body on the wave field were significant only when the contrast of the elastic properties between tool body and borehole fluid was large.
基金supported by the National Natural ScienceFoundation of China(Grant Nos.10534040,40574049 and 40874097)the Research Fund for the Doctoral Programof Higher Education(Grant No.20070425028)the Foundation of State Key Laboratory of Petroleum Resourceand Prospecting,China University of Petroleum(Grant No.PRPDX2008-08).
文摘The acoustic tools widely used in borehole well logging and being developed in borehole acoustic reflection imaging do not have the function of azimuthal measurement due to a symmetric source, so they can not be used to evaluate the azimuthal character of borehole formation. In this paper, a 3D finite difference method was used to simulate the acoustic fields in a fluid-filled borehole generated by a traditional monopole source and a phased arc array. Acoustic waveforms were presented for both cases. The analysis of the simulated waveforms showed that different from the monopole source, the acoustic energy generated by the phased arc array transmitter mainly radiated to the borehole in a narrow azimuthal range, which was the key technique to implement azimuthal acoustic well logging. Similar to the monopole source, the waveforms generated by the phased arc array in the fluid-filled borehole also contain compressional （P） waves and shear （S） waves refracted along the borehole, which is the theoretical foundation of phased arc array acoustic well logging.
基金supported by the National Natural Science Foundation of China(41874210 and 11734017)the National Science and Technology Major Project(2017ZX05019001 and 2017ZX05019006)+1 种基金the Petro China Innovation Foundation(2016D-5007-0303)the Science Foundation of China University of Petroleum,Beijing(2462016YJRC020)。
文摘Acoustic waves enter a rock formation from a borehole and are reflected or scattered upon encountering a geologic structure.Consequently,we obtain the structure location represented by the azimuth and distance from the borehole using the acoustic reflection or scattering.Downhole acoustic measurements with the azimuthal resolution are realized using an azimuthal acoustic receiver sonde composed of several arcuate phased array receivers.Eight sensors distributed evenly across the arcuate phased array receiver can record acoustic waves independently;this allows us to adopt the beamforming method.We use a supporting logging tool to conduct the downhole test in two adjacent fluid-filled boreholes,for validating the evaluation of the geologic structure using scattered P-waves.The test results show the multi-azimuth images of the target borehole and the azimuthal variation in scattering amplitudes.Thus,we obtain the precise location of the target borehole.Furthermore,the measured values of the target borehole are consistent with the actual values,indicating that we can accurately evaluate a near-borehole geologic structure with scattered P-waves.
基金supported by the National Natural Science Foundation of China(grant numbers 12274465,42174218)the Strategic Cooperation Technology Projects of CNPC and CUPB(grant numberZLZX2020-02).
文摘In oil and gas exploitation,cluster well technology can significantly reduce costs and improve efficiency.An effective adjacent well detection method can greatly reduce the risk of collision between adjacent wells.This study proposes a method to invert the 3D trajectory of an adjacent well using a scattered P-wave obtained by borehole azimuthal acoustic reflection imaging.After obtaining the scattered P-wave from the raw data of the target well using the wave field separation technology,the waveform data in an imaging profile can be obtained by the downhole acoustic directional reception technology.Migration imaging technology is then used to obtain the image of the formation in the imaging profile.Subsequently,by analyzing the images of the formation in the imaging profile of the different azimuths,the well spacing and azimuth of the target well can be determined.Finally,the 3D trajectory of the target well can be obtained by solving the inversion equation.This method was validated by processing the field data from a deviated well in a deep formation.The comparison of the inversion and actual trajectories of the target well demonstrated that the maximum deviation of the inversion trajectory is 0.9 m in the north-south direction,0.78 m in the east-west direction,1.45 m in the well spacing,and 2.48°in the azimuth.The field data inversion result demonstrated that the method can effectively use the azimuth reflection acoustic data to invert the 3D trajectory of an adjacent well,which indicates that the borehole azimuthal acoustic reflection imaging technology has great potential within the context of adjacent well detection.
