It is still challenging for exploring high-active photocatalysts to efficiently remove levofloxacin(LFX)by activating peroxymonosulfate(PMS).Herein,we constructed a novel Z scheme ZnFe_(2)O_(4)/g-C_(3)N_(4)/CQDs(ZCC)h...It is still challenging for exploring high-active photocatalysts to efficiently remove levofloxacin(LFX)by activating peroxymonosulfate(PMS).Herein,we constructed a novel Z scheme ZnFe_(2)O_(4)/g-C_(3)N_(4)/CQDs(ZCC)heterojunction by anchoring ZnFe_(2)O_(4)on tubular-like g-C_(3)N_(4)induced by CQDs(denoted as CNC)using microwave-assisted thermal methods.The ZCC exhibits the highest photocatalytic activity in activating PMS for LFX degradation,endowing a removal rate~95.3%,which is 4.8 and 7.3 times that of pure ZnFe_(2)O_(4)(19.8%)and g-C_(3)N_(4)(13.1%),separately.The enhanced photocatalytic activity of ZCC can be attributed to the distinctive morphology of CNC,enhanced light response,increased specific surface area and abundant pore structure.Besides,the formed Z scheme heterojunction and CQDs acting as a transmission bridge of the photogenerated charges(e−and h+)can accelerate transfer and inhibit recombination of e−and h+.Radical capture experiments and electron spin resonance(ESR)measurements revealed that SO4•-and O2•-play a predominant role in degradation process of LFX.Liquid chromatography-mass spectrometry(LC-MS)was applied to identify intermediates and propose feasible degradation pathways of LFX.In conclusion,this study presents a promising strategy for regulating the photocatalytic activity of g-C_(3)N_(4)by simultaneously integrating CQDs induction and Z scheme heterojunction construction.展开更多
利用浸涂法将Cr_(2)O_(3)涂覆于Al_(2)O_(3)陶瓷表面,通过高温烧结获得涂层陶瓷,并系统性地研究了Cr_(2)O_(3)涂层对样品的物质成分、微观形貌、二次电子发射系数、表面电阻率和真空沿面耐压性能的影响。结果表明:涂层陶瓷表面呈红黑色...利用浸涂法将Cr_(2)O_(3)涂覆于Al_(2)O_(3)陶瓷表面,通过高温烧结获得涂层陶瓷,并系统性地研究了Cr_(2)O_(3)涂层对样品的物质成分、微观形貌、二次电子发射系数、表面电阻率和真空沿面耐压性能的影响。结果表明:涂层陶瓷表面呈红黑色,其为Al_(2)O_(3)-Cr_(2)O_(3)固溶体、Mg Al_(2)O_(4)和Cr_(2)O_(3)三种物质的混合物。相较于Al_(2)O_(3)陶瓷,涂层表面晶粒和孔洞的尺寸均较小,其晶粒尺寸均匀性也有明显提升。高温烧结后,Al、Cr两种元素相互扩散,并且涂层中有少量从陶瓷基体迁移而来的玻璃相。高温烧结的Cr_(2)O_(3)涂层将Al_(2)O_(3)陶瓷的二次电子发射系数减小至3.22,将表面电阻率减小至4.52×10^(11)Ω,将真空沿面耐压强度增大至34.44 k V/cm,此值较Al_(2)O_(3)陶瓷提高了约108%。展开更多
基金Project(32272823) supported by the National Natural Science Foundation of ChinaProject(145309315) supported by the Research Foundation of Education Bureau of Heilongjiang Province of ChinaProject(YSTSXK202309) supported by the Plant Food Processing Technology Advantages Characteristic Discipline “Science and Technology Research” Special Project in Heilongjiang Province,China。
文摘It is still challenging for exploring high-active photocatalysts to efficiently remove levofloxacin(LFX)by activating peroxymonosulfate(PMS).Herein,we constructed a novel Z scheme ZnFe_(2)O_(4)/g-C_(3)N_(4)/CQDs(ZCC)heterojunction by anchoring ZnFe_(2)O_(4)on tubular-like g-C_(3)N_(4)induced by CQDs(denoted as CNC)using microwave-assisted thermal methods.The ZCC exhibits the highest photocatalytic activity in activating PMS for LFX degradation,endowing a removal rate~95.3%,which is 4.8 and 7.3 times that of pure ZnFe_(2)O_(4)(19.8%)and g-C_(3)N_(4)(13.1%),separately.The enhanced photocatalytic activity of ZCC can be attributed to the distinctive morphology of CNC,enhanced light response,increased specific surface area and abundant pore structure.Besides,the formed Z scheme heterojunction and CQDs acting as a transmission bridge of the photogenerated charges(e−and h+)can accelerate transfer and inhibit recombination of e−and h+.Radical capture experiments and electron spin resonance(ESR)measurements revealed that SO4•-and O2•-play a predominant role in degradation process of LFX.Liquid chromatography-mass spectrometry(LC-MS)was applied to identify intermediates and propose feasible degradation pathways of LFX.In conclusion,this study presents a promising strategy for regulating the photocatalytic activity of g-C_(3)N_(4)by simultaneously integrating CQDs induction and Z scheme heterojunction construction.
文摘利用浸涂法将Cr_(2)O_(3)涂覆于Al_(2)O_(3)陶瓷表面,通过高温烧结获得涂层陶瓷,并系统性地研究了Cr_(2)O_(3)涂层对样品的物质成分、微观形貌、二次电子发射系数、表面电阻率和真空沿面耐压性能的影响。结果表明:涂层陶瓷表面呈红黑色,其为Al_(2)O_(3)-Cr_(2)O_(3)固溶体、Mg Al_(2)O_(4)和Cr_(2)O_(3)三种物质的混合物。相较于Al_(2)O_(3)陶瓷,涂层表面晶粒和孔洞的尺寸均较小,其晶粒尺寸均匀性也有明显提升。高温烧结后,Al、Cr两种元素相互扩散,并且涂层中有少量从陶瓷基体迁移而来的玻璃相。高温烧结的Cr_(2)O_(3)涂层将Al_(2)O_(3)陶瓷的二次电子发射系数减小至3.22,将表面电阻率减小至4.52×10^(11)Ω,将真空沿面耐压强度增大至34.44 k V/cm,此值较Al_(2)O_(3)陶瓷提高了约108%。
