Objective,Used the TG/DTA curves and XRD patterns to identify five kinds of free anthraquinones.Method,The thermograms,differential thermograms and X-ray powder diffraction patterns were obtained by thermal analyzer a...Objective,Used the TG/DTA curves and XRD patterns to identify five kinds of free anthraquinones.Method,The thermograms,differential thermograms and X-ray powder diffraction patterns were obtained by thermal analyzer and X-ray powder diffraction analyzer.Result,By analyzing the TG/DTA curves and XRD patterns of the free anthraquinones(Rhein,Emodin,Aloe-emodin,Chrysophanol and Physcion)from Rheum,the results showed that they had the similar TG curves,however,due to the substituents attached on the 1.8-dihydric anthraquinones are different,every sample had different weight lose.All the DTA curves of free anthraquinones had two obviously characteristic peaks,but there were obviously differences on curvilinear shapes,peak location and peak values.The X-ray powder diffraction patterns of free anthraquinones have their own characteristic and very obvious.Conclusion: According to the differences in the thermal and XRD properties of five free anthraquinones,the kind of free anthraquinones could be easily identified and they can be used as correspondence free anthraquinones’s characteristic fingerprint patterns.展开更多
Non Pt based metals and alloys as electrode materials for methyl alcohol fuel cells have been investigated w ith an aim of finding high electrocatalytic surface property for the faster electrode reactions.Electrodes w...Non Pt based metals and alloys as electrode materials for methyl alcohol fuel cells have been investigated w ith an aim of finding high electrocatalytic surface property for the faster electrode reactions.Electrodes w ere fabricated by electrodeposition on pure Al foil,from an electrolyte of Ni,Co,Fe salts.The optimum condition of electrodeposition w ere found out by a series of experiments,varying the chemistry of the electrolyte,pH valve,temperature,current and cell potential.Polarization study of the coated Ni-Co or Ni-CoFe alloy on pure Al w as found to exhibit high exchange current density,indicating an improved electro catalytic surface w ith faster charge-discharge reactions at anode and cathode and low overvoltage.Electrochemical impedance studies on coated and uncoated surface clearly show ed that the polarization resistance and impedance w ere decreased by Ni-Co or Ni-Co-Fe coating.X-ray diffraction(XRD),energy dispersive X-ray spectroscopy(EDX)and atomic absorption spectroscopy(AAS)studies confirmed the presence of alloying elements and constituents of the alloy.The morphology of the deposits from scanning electron microscope(SEM)images indicated that the electrode surface w as a three dimensional space w hich increased the effective surface area for the electrode reactions to take place.展开更多
In order to simulate and study the mechanism of cement stabilized soils polluted by different contents of magnesium sulfate(MS), a series of tests were conducted on the cemented soil samples, including unconfined comp...In order to simulate and study the mechanism of cement stabilized soils polluted by different contents of magnesium sulfate(MS), a series of tests were conducted on the cemented soil samples, including unconfined compression strength(UCS) tests of blocks, X-ray diffraction(XRD) phase analysis of powder samples, microstructure by scanning electronic microscopy(SEM),element composition by energy dispersive spectrometry(EDS), and pore distribution analysis by Image Processed Plus 6.0(IPP 6.0)software. The UCS test results show that UCS of cemented soils reaches the peak value when the MS content is 4.5 g/kg. While, the UCS for Sample MS4 having the MS content of 18.0 g/kg is the lowest among all tested samples. Based on the EDS analysis results,Sample MS4 has the greater contents for the three elements, oxygen(O), magnesium(Mg) and sulfur(S), than Sample MS1. From the XRD phase analysis, C-A-S-H(3Ca O·Al2O3·3Ca SO4·32H2O and 3Ca O·Al2O3·Ca SO4·18H2O), M-A-H(Mg O·Al2O3·H2O), M-S-H(Mg O·Si O2·H2O), Mg(OH)2 and Ca SO4 phase diffraction peaks are obviously intense due to the chemical action associated with the MS. The pore distribution analysis shows that the hydrated products change the distribution of cemented soil pores and the pores with average diameter(AD) of 2-50 μm play a key role in terms of the whole structure of cemented soil. The microscopic structure of the cemented soil with MS exhibits the intertwined and embedded characteristics between the cement and granular soils from the SEM images of cemented soils. The microstructure analysis shows that the magnesium sulfate acts as the additive, which is beneficial to the soil strength when the MS content is low(i.e., Sample MS2). However, higher MS amount involving a chemical action makes samples crystallize and expand, which is adverse to the UCS of cemented soils(i.e., Sample MS4).展开更多
A severe Asian Dust Storm(ADS)event occurred on April 16-17th,2006 in northem China.Mineral components of dust samples were analyzed using X-ray diffraction(XRD).The result indicates that dust particles were dominated...A severe Asian Dust Storm(ADS)event occurred on April 16-17th,2006 in northem China.Mineral components of dust samples were analyzed using X-ray diffraction(XRD).The result indicates that dust particles were dominated by quartz(37.4%)and clay (32.9%),followed by plagioclase(13.7%),with small amounts of calcite,K-feldspar,dolomite,homblende, and gypsum(all【10%).The clay fractions with diameter less than 2μm were separated from the展开更多
文摘Objective,Used the TG/DTA curves and XRD patterns to identify five kinds of free anthraquinones.Method,The thermograms,differential thermograms and X-ray powder diffraction patterns were obtained by thermal analyzer and X-ray powder diffraction analyzer.Result,By analyzing the TG/DTA curves and XRD patterns of the free anthraquinones(Rhein,Emodin,Aloe-emodin,Chrysophanol and Physcion)from Rheum,the results showed that they had the similar TG curves,however,due to the substituents attached on the 1.8-dihydric anthraquinones are different,every sample had different weight lose.All the DTA curves of free anthraquinones had two obviously characteristic peaks,but there were obviously differences on curvilinear shapes,peak location and peak values.The X-ray powder diffraction patterns of free anthraquinones have their own characteristic and very obvious.Conclusion: According to the differences in the thermal and XRD properties of five free anthraquinones,the kind of free anthraquinones could be easily identified and they can be used as correspondence free anthraquinones’s characteristic fingerprint patterns.
文摘Non Pt based metals and alloys as electrode materials for methyl alcohol fuel cells have been investigated w ith an aim of finding high electrocatalytic surface property for the faster electrode reactions.Electrodes w ere fabricated by electrodeposition on pure Al foil,from an electrolyte of Ni,Co,Fe salts.The optimum condition of electrodeposition w ere found out by a series of experiments,varying the chemistry of the electrolyte,pH valve,temperature,current and cell potential.Polarization study of the coated Ni-Co or Ni-CoFe alloy on pure Al w as found to exhibit high exchange current density,indicating an improved electro catalytic surface w ith faster charge-discharge reactions at anode and cathode and low overvoltage.Electrochemical impedance studies on coated and uncoated surface clearly show ed that the polarization resistance and impedance w ere decreased by Ni-Co or Ni-Co-Fe coating.X-ray diffraction(XRD),energy dispersive X-ray spectroscopy(EDX)and atomic absorption spectroscopy(AAS)studies confirmed the presence of alloying elements and constituents of the alloy.The morphology of the deposits from scanning electron microscope(SEM)images indicated that the electrode surface w as a three dimensional space w hich increased the effective surface area for the electrode reactions to take place.
基金Projects(51208333,51078253)supported by the National Natural Science Foundation of China
文摘In order to simulate and study the mechanism of cement stabilized soils polluted by different contents of magnesium sulfate(MS), a series of tests were conducted on the cemented soil samples, including unconfined compression strength(UCS) tests of blocks, X-ray diffraction(XRD) phase analysis of powder samples, microstructure by scanning electronic microscopy(SEM),element composition by energy dispersive spectrometry(EDS), and pore distribution analysis by Image Processed Plus 6.0(IPP 6.0)software. The UCS test results show that UCS of cemented soils reaches the peak value when the MS content is 4.5 g/kg. While, the UCS for Sample MS4 having the MS content of 18.0 g/kg is the lowest among all tested samples. Based on the EDS analysis results,Sample MS4 has the greater contents for the three elements, oxygen(O), magnesium(Mg) and sulfur(S), than Sample MS1. From the XRD phase analysis, C-A-S-H(3Ca O·Al2O3·3Ca SO4·32H2O and 3Ca O·Al2O3·Ca SO4·18H2O), M-A-H(Mg O·Al2O3·H2O), M-S-H(Mg O·Si O2·H2O), Mg(OH)2 and Ca SO4 phase diffraction peaks are obviously intense due to the chemical action associated with the MS. The pore distribution analysis shows that the hydrated products change the distribution of cemented soil pores and the pores with average diameter(AD) of 2-50 μm play a key role in terms of the whole structure of cemented soil. The microscopic structure of the cemented soil with MS exhibits the intertwined and embedded characteristics between the cement and granular soils from the SEM images of cemented soils. The microstructure analysis shows that the magnesium sulfate acts as the additive, which is beneficial to the soil strength when the MS content is low(i.e., Sample MS2). However, higher MS amount involving a chemical action makes samples crystallize and expand, which is adverse to the UCS of cemented soils(i.e., Sample MS4).
文摘A severe Asian Dust Storm(ADS)event occurred on April 16-17th,2006 in northem China.Mineral components of dust samples were analyzed using X-ray diffraction(XRD).The result indicates that dust particles were dominated by quartz(37.4%)and clay (32.9%),followed by plagioclase(13.7%),with small amounts of calcite,K-feldspar,dolomite,homblende, and gypsum(all【10%).The clay fractions with diameter less than 2μm were separated from the
