网纹红土红色基质和白色网纹的成分和结构差异性影响并控制着工程特性。文章通过扫描电子显微镜(scanning electron microscope,SEM)实验和数字图像处理技术定量研究原状网纹红土的微孔隙特征,进而基于能量色散谱仪(energy dispersive s...网纹红土红色基质和白色网纹的成分和结构差异性影响并控制着工程特性。文章通过扫描电子显微镜(scanning electron microscope,SEM)实验和数字图像处理技术定量研究原状网纹红土的微孔隙特征,进而基于能量色散谱仪(energy dispersive spectrometer,EDS)和X射线衍射仪(X-ray diffractometer,XRD)分析了红色基质和白色网纹的化学成分和黏土矿物构成,以探讨网纹红土微结构和成分与其力学特征的内在联系。研究得出,网纹红土孔隙主要为小于0.5μm2面积的微孔隙,而面积超过50μm2的大孔隙则较少,但红色基质颗粒表面粗糙、棱角分明,主要由绿泥石/蒙脱石混层和伊利石以及少量的绿泥石和高岭石构成,而白色网纹颗粒则较为圆滑,由伊利石/蒙脱石混层和伊利石构成,且红色基质中Fe元素质量分数高于白色网纹,而两者中的Ti元素质量分数稳定。研究结果可为深入分析网纹红土工程特征提供依据。展开更多
Non Pt based metals and alloys as electrode materials for methyl alcohol fuel cells have been investigated w ith an aim of finding high electrocatalytic surface property for the faster electrode reactions.Electrodes w...Non Pt based metals and alloys as electrode materials for methyl alcohol fuel cells have been investigated w ith an aim of finding high electrocatalytic surface property for the faster electrode reactions.Electrodes w ere fabricated by electrodeposition on pure Al foil,from an electrolyte of Ni,Co,Fe salts.The optimum condition of electrodeposition w ere found out by a series of experiments,varying the chemistry of the electrolyte,pH valve,temperature,current and cell potential.Polarization study of the coated Ni-Co or Ni-CoFe alloy on pure Al w as found to exhibit high exchange current density,indicating an improved electro catalytic surface w ith faster charge-discharge reactions at anode and cathode and low overvoltage.Electrochemical impedance studies on coated and uncoated surface clearly show ed that the polarization resistance and impedance w ere decreased by Ni-Co or Ni-Co-Fe coating.X-ray diffraction(XRD),energy dispersive X-ray spectroscopy(EDX)and atomic absorption spectroscopy(AAS)studies confirmed the presence of alloying elements and constituents of the alloy.The morphology of the deposits from scanning electron microscope(SEM)images indicated that the electrode surface w as a three dimensional space w hich increased the effective surface area for the electrode reactions to take place.展开更多
In order to simulate and study the mechanism of cement stabilized soils polluted by different contents of magnesium sulfate(MS), a series of tests were conducted on the cemented soil samples, including unconfined comp...In order to simulate and study the mechanism of cement stabilized soils polluted by different contents of magnesium sulfate(MS), a series of tests were conducted on the cemented soil samples, including unconfined compression strength(UCS) tests of blocks, X-ray diffraction(XRD) phase analysis of powder samples, microstructure by scanning electronic microscopy(SEM),element composition by energy dispersive spectrometry(EDS), and pore distribution analysis by Image Processed Plus 6.0(IPP 6.0)software. The UCS test results show that UCS of cemented soils reaches the peak value when the MS content is 4.5 g/kg. While, the UCS for Sample MS4 having the MS content of 18.0 g/kg is the lowest among all tested samples. Based on the EDS analysis results,Sample MS4 has the greater contents for the three elements, oxygen(O), magnesium(Mg) and sulfur(S), than Sample MS1. From the XRD phase analysis, C-A-S-H(3Ca O·Al2O3·3Ca SO4·32H2O and 3Ca O·Al2O3·Ca SO4·18H2O), M-A-H(Mg O·Al2O3·H2O), M-S-H(Mg O·Si O2·H2O), Mg(OH)2 and Ca SO4 phase diffraction peaks are obviously intense due to the chemical action associated with the MS. The pore distribution analysis shows that the hydrated products change the distribution of cemented soil pores and the pores with average diameter(AD) of 2-50 μm play a key role in terms of the whole structure of cemented soil. The microscopic structure of the cemented soil with MS exhibits the intertwined and embedded characteristics between the cement and granular soils from the SEM images of cemented soils. The microstructure analysis shows that the magnesium sulfate acts as the additive, which is beneficial to the soil strength when the MS content is low(i.e., Sample MS2). However, higher MS amount involving a chemical action makes samples crystallize and expand, which is adverse to the UCS of cemented soils(i.e., Sample MS4).展开更多
A severe Asian Dust Storm(ADS)event occurred on April 16-17th,2006 in northem China.Mineral components of dust samples were analyzed using X-ray diffraction(XRD).The result indicates that dust particles were dominated...A severe Asian Dust Storm(ADS)event occurred on April 16-17th,2006 in northem China.Mineral components of dust samples were analyzed using X-ray diffraction(XRD).The result indicates that dust particles were dominated by quartz(37.4%)and clay (32.9%),followed by plagioclase(13.7%),with small amounts of calcite,K-feldspar,dolomite,homblende, and gypsum(all【10%).The clay fractions with diameter less than 2μm were separated from the展开更多
文摘Non Pt based metals and alloys as electrode materials for methyl alcohol fuel cells have been investigated w ith an aim of finding high electrocatalytic surface property for the faster electrode reactions.Electrodes w ere fabricated by electrodeposition on pure Al foil,from an electrolyte of Ni,Co,Fe salts.The optimum condition of electrodeposition w ere found out by a series of experiments,varying the chemistry of the electrolyte,pH valve,temperature,current and cell potential.Polarization study of the coated Ni-Co or Ni-CoFe alloy on pure Al w as found to exhibit high exchange current density,indicating an improved electro catalytic surface w ith faster charge-discharge reactions at anode and cathode and low overvoltage.Electrochemical impedance studies on coated and uncoated surface clearly show ed that the polarization resistance and impedance w ere decreased by Ni-Co or Ni-Co-Fe coating.X-ray diffraction(XRD),energy dispersive X-ray spectroscopy(EDX)and atomic absorption spectroscopy(AAS)studies confirmed the presence of alloying elements and constituents of the alloy.The morphology of the deposits from scanning electron microscope(SEM)images indicated that the electrode surface w as a three dimensional space w hich increased the effective surface area for the electrode reactions to take place.
基金Projects(51208333,51078253)supported by the National Natural Science Foundation of China
文摘In order to simulate and study the mechanism of cement stabilized soils polluted by different contents of magnesium sulfate(MS), a series of tests were conducted on the cemented soil samples, including unconfined compression strength(UCS) tests of blocks, X-ray diffraction(XRD) phase analysis of powder samples, microstructure by scanning electronic microscopy(SEM),element composition by energy dispersive spectrometry(EDS), and pore distribution analysis by Image Processed Plus 6.0(IPP 6.0)software. The UCS test results show that UCS of cemented soils reaches the peak value when the MS content is 4.5 g/kg. While, the UCS for Sample MS4 having the MS content of 18.0 g/kg is the lowest among all tested samples. Based on the EDS analysis results,Sample MS4 has the greater contents for the three elements, oxygen(O), magnesium(Mg) and sulfur(S), than Sample MS1. From the XRD phase analysis, C-A-S-H(3Ca O·Al2O3·3Ca SO4·32H2O and 3Ca O·Al2O3·Ca SO4·18H2O), M-A-H(Mg O·Al2O3·H2O), M-S-H(Mg O·Si O2·H2O), Mg(OH)2 and Ca SO4 phase diffraction peaks are obviously intense due to the chemical action associated with the MS. The pore distribution analysis shows that the hydrated products change the distribution of cemented soil pores and the pores with average diameter(AD) of 2-50 μm play a key role in terms of the whole structure of cemented soil. The microscopic structure of the cemented soil with MS exhibits the intertwined and embedded characteristics between the cement and granular soils from the SEM images of cemented soils. The microstructure analysis shows that the magnesium sulfate acts as the additive, which is beneficial to the soil strength when the MS content is low(i.e., Sample MS2). However, higher MS amount involving a chemical action makes samples crystallize and expand, which is adverse to the UCS of cemented soils(i.e., Sample MS4).
文摘A severe Asian Dust Storm(ADS)event occurred on April 16-17th,2006 in northem China.Mineral components of dust samples were analyzed using X-ray diffraction(XRD).The result indicates that dust particles were dominated by quartz(37.4%)and clay (32.9%),followed by plagioclase(13.7%),with small amounts of calcite,K-feldspar,dolomite,homblende, and gypsum(all【10%).The clay fractions with diameter less than 2μm were separated from the
