Since the discovery of carbon dots(CDs)in 2004,the unique photoluminescence phenomenon of CDs has attracted widespread attention.However,the molecular weight of CDs has not been adequately quantified at present,due to...Since the discovery of carbon dots(CDs)in 2004,the unique photoluminescence phenomenon of CDs has attracted widespread attention.However,the molecular weight of CDs has not been adequately quantified at present,due to CDs are atomically imprecise and their molecular weight distribution is broad.In this paper,a series of Pluronic-modified CDs were prepared and the structure of the CDs was briefly analyzed.Subsequently,a molecular weight measurement method based on colligative properties was developed,and the correction coefficient in the algorithm was briefly analyzed.The calculated molecular weight was applied to the determination of surface adsorption capacity.This work provided a method for averaging the molecular weight of atomically imprecise particulate materials,which is expected to provide new opportunities in related fields.展开更多
This paper presents a concept of the 3-state device system with link-capacity, whichcan, besides its normal operative state, assume two different failure states: an open-mode and ashorted-mode failure state. The 3-sta...This paper presents a concept of the 3-state device system with link-capacity, whichcan, besides its normal operative state, assume two different failure states: an open-mode and ashorted-mode failure state. The 3-state system reliability analysis often uses flow required andprobability of the device to compute the probability of the system with link-capacity. We use themethod of max-flow and min-cut theorem, give four theorems to reduce 3-state device network withlink-capacity reliability problems to 2-state problems. For practical, relevant network sizes (up to100 components), the algorithm is fast and efficient.展开更多
Caprocks play an important role in the trapping of coalbed methane(CBM)reservoirs.To study the sealing capacities of caprocks,five samples with different lithologies of Neogene clayrock,Paleogene redbeds,Permian sands...Caprocks play an important role in the trapping of coalbed methane(CBM)reservoirs.To study the sealing capacities of caprocks,five samples with different lithologies of Neogene clayrock,Paleogene redbeds,Permian sandstone,Permian mudstone and Permian siltstone were collected and tested using experimental methods of microstructure observation,pore structure measurement and diffusion properties determination.Results indicate that with denser structures,lower porosities,much more developed micropores/transition pores and higher pore/throat ratios,mudstone and siltstone have the more ideal sealing capacities for CBM preservation when comparing to other kinds of caprocks;the methane diffusion coefficients of mudstone/siltstone are about 6 times higher than sandstone and almost 90 times higher than clayrock/redbeds.To further estimate the CBM escape through caprocks,a one-dimensional CBM diffusion model is derived.Modeling calculation result demonstrates that under the same thickness,the CBM sealing abilities of mudstone/siltstone are almost 100 times higher than those of clayrock/redbeds,and nearly 17 times higher than sandstone,which indicates that the coal seam below caprocks like clayrock,redbeds or sandstone may suffer stronger CBM diffusion effect than that below mudstone or siltstone.Such conclusion is verified by the case study from III3 District,Xutuan Colliery,where the coal seam capped by Paleogene redbeds has a much lower CBM content than that capped by the Permian strata like mudstone,siltstone and sandstone.展开更多
To study the influence of B4C particle size on the microstructure and damping capacities of(B_(4)C+Ti)/Mg composites,in situ reactive infiltration technique was utilized to prepare Mg-matrix composites.The microstruct...To study the influence of B4C particle size on the microstructure and damping capacities of(B_(4)C+Ti)/Mg composites,in situ reactive infiltration technique was utilized to prepare Mg-matrix composites.The microstructure,produced phases and damping capacities of the composites prepared with different particle size of B4C were characterized and analyzed.The results show that the reaction between B4C and Ti tends to be more complete when finer B_(4)C particle was used to prepare the composites.But the microstructure of the as-prepared composites is more homogenous when B4C and Ti have similar particle size.The strain-dependent damping capacities of(B_(4)C+Ti)/Mg composites improve gradually with the increase of strain amplitude,and composites prepared with coarser B4C particles tend to have higher damping capacities.The temperature-dependent damping capacities improve with increasing the measuring temperatures,and the kind of damping capacities of the composites prepared with 5mm B4C are inferior to those of coarser particles.The dominant damping mechanism for the strain-damping capacity is dislocation damping and plastic zone damping,while that for the temperature-damping capacity is interface damping or grain boundary damping.展开更多
Single phases of ammonium penta and tetra molybdates were prepared. The massic heat capacities at normal pre ssure below their decomposition temperatures were measured by drop method. The relationships of the massic h...Single phases of ammonium penta and tetra molybdates were prepared. The massic heat capacities at normal pre ssure below their decomposition temperatures were measured by drop method. The relationships of the massic heat capacities of ammonium molybdates with those of the decomposition products were also discussed. The results show that the massic heat capacities of ammonium molybdates can be estimated by adding together contributions from their decomposition products, and the less change of chemical bonds, the more accurate of the estimation.展开更多
With the rapid development of low-orbit satellite com-munication networks both domestically and internationally,space-terrestrial integrated networks will become the future development trend.For space and terrestrial ...With the rapid development of low-orbit satellite com-munication networks both domestically and internationally,space-terrestrial integrated networks will become the future development trend.For space and terrestrial networks with limi-ted resources,the utilization efficiency of the entire space-terres-trial integrated networks resources can be affected by the core network indirectly.In order to improve the response efficiency of core networks expansion construction,early warning of the core network elements capacity is necessary.Based on the inte-grated architecture of space and terrestrial network,multidimen-sional factors are considered in this paper,including the number of terminals,login users,and the rules of users’migration during holidays.Using artifical intelligence(AI)technologies,the regis-tered users of the access and mobility management function(AMF),authorization users of the unified data management(UDM),protocol data unit(PDU)sessions of session manage-ment function(SMF)are predicted in combination with the num-ber of login users,the number of terminals.Therefore,the core network elements capacity can be predicted in advance.The proposed method is proven to be effective based on the data from real network.展开更多
Cascading failures in infrastructure networks have serious impacts on network function.The limited capacity of net-work nodes provides a necessary condition for cascade failure.However,the network capacity cannot be i...Cascading failures in infrastructure networks have serious impacts on network function.The limited capacity of net-work nodes provides a necessary condition for cascade failure.However,the network capacity cannot be infinite in the real net-work system.Therefore,how to reasonably allocate the limited capacity resources is of great significance.In this article,we put forward a capacity allocation strategy based on community structure against cascading failure.Experimental results indi-cate that the proposed method can reduce the scale of cascade failures with higher capacity utilization compared with Motter-Lai(ML)model.The advantage of our method is more obvious in scale-free network.Furthermore,the experiment shows that the cascade effect is more obvious when the vertex load is ran-domly varying.It is known to all that the growth of network capacity can make the network more resistant to destruction,but in this paper it is found that the contribution rate of unit capacity rises first and then decreases with the growth of net-work capacity cost.展开更多
文摘Since the discovery of carbon dots(CDs)in 2004,the unique photoluminescence phenomenon of CDs has attracted widespread attention.However,the molecular weight of CDs has not been adequately quantified at present,due to CDs are atomically imprecise and their molecular weight distribution is broad.In this paper,a series of Pluronic-modified CDs were prepared and the structure of the CDs was briefly analyzed.Subsequently,a molecular weight measurement method based on colligative properties was developed,and the correction coefficient in the algorithm was briefly analyzed.The calculated molecular weight was applied to the determination of surface adsorption capacity.This work provided a method for averaging the molecular weight of atomically imprecise particulate materials,which is expected to provide new opportunities in related fields.
文摘This paper presents a concept of the 3-state device system with link-capacity, whichcan, besides its normal operative state, assume two different failure states: an open-mode and ashorted-mode failure state. The 3-state system reliability analysis often uses flow required andprobability of the device to compute the probability of the system with link-capacity. We use themethod of max-flow and min-cut theorem, give four theorems to reduce 3-state device network withlink-capacity reliability problems to 2-state problems. For practical, relevant network sizes (up to100 components), the algorithm is fast and efficient.
基金Project(2016YFC0801608) supported by the National Key Research and Development Plan,ChinaProject(51574148) supported by the National Natural Science Foundation of China
文摘Caprocks play an important role in the trapping of coalbed methane(CBM)reservoirs.To study the sealing capacities of caprocks,five samples with different lithologies of Neogene clayrock,Paleogene redbeds,Permian sandstone,Permian mudstone and Permian siltstone were collected and tested using experimental methods of microstructure observation,pore structure measurement and diffusion properties determination.Results indicate that with denser structures,lower porosities,much more developed micropores/transition pores and higher pore/throat ratios,mudstone and siltstone have the more ideal sealing capacities for CBM preservation when comparing to other kinds of caprocks;the methane diffusion coefficients of mudstone/siltstone are about 6 times higher than sandstone and almost 90 times higher than clayrock/redbeds.To further estimate the CBM escape through caprocks,a one-dimensional CBM diffusion model is derived.Modeling calculation result demonstrates that under the same thickness,the CBM sealing abilities of mudstone/siltstone are almost 100 times higher than those of clayrock/redbeds,and nearly 17 times higher than sandstone,which indicates that the coal seam below caprocks like clayrock,redbeds or sandstone may suffer stronger CBM diffusion effect than that below mudstone or siltstone.Such conclusion is verified by the case study from III3 District,Xutuan Colliery,where the coal seam capped by Paleogene redbeds has a much lower CBM content than that capped by the Permian strata like mudstone,siltstone and sandstone.
基金Project(51901095)supported by the National Natural Science Foundation of China。
文摘To study the influence of B4C particle size on the microstructure and damping capacities of(B_(4)C+Ti)/Mg composites,in situ reactive infiltration technique was utilized to prepare Mg-matrix composites.The microstructure,produced phases and damping capacities of the composites prepared with different particle size of B4C were characterized and analyzed.The results show that the reaction between B4C and Ti tends to be more complete when finer B_(4)C particle was used to prepare the composites.But the microstructure of the as-prepared composites is more homogenous when B4C and Ti have similar particle size.The strain-dependent damping capacities of(B_(4)C+Ti)/Mg composites improve gradually with the increase of strain amplitude,and composites prepared with coarser B4C particles tend to have higher damping capacities.The temperature-dependent damping capacities improve with increasing the measuring temperatures,and the kind of damping capacities of the composites prepared with 5mm B4C are inferior to those of coarser particles.The dominant damping mechanism for the strain-damping capacity is dislocation damping and plastic zone damping,while that for the temperature-damping capacity is interface damping or grain boundary damping.
文摘Single phases of ammonium penta and tetra molybdates were prepared. The massic heat capacities at normal pre ssure below their decomposition temperatures were measured by drop method. The relationships of the massic heat capacities of ammonium molybdates with those of the decomposition products were also discussed. The results show that the massic heat capacities of ammonium molybdates can be estimated by adding together contributions from their decomposition products, and the less change of chemical bonds, the more accurate of the estimation.
基金This work was supported by the National Key Research Plan(2021YFB2900602).
文摘With the rapid development of low-orbit satellite com-munication networks both domestically and internationally,space-terrestrial integrated networks will become the future development trend.For space and terrestrial networks with limi-ted resources,the utilization efficiency of the entire space-terres-trial integrated networks resources can be affected by the core network indirectly.In order to improve the response efficiency of core networks expansion construction,early warning of the core network elements capacity is necessary.Based on the inte-grated architecture of space and terrestrial network,multidimen-sional factors are considered in this paper,including the number of terminals,login users,and the rules of users’migration during holidays.Using artifical intelligence(AI)technologies,the regis-tered users of the access and mobility management function(AMF),authorization users of the unified data management(UDM),protocol data unit(PDU)sessions of session manage-ment function(SMF)are predicted in combination with the num-ber of login users,the number of terminals.Therefore,the core network elements capacity can be predicted in advance.The proposed method is proven to be effective based on the data from real network.
文摘Cascading failures in infrastructure networks have serious impacts on network function.The limited capacity of net-work nodes provides a necessary condition for cascade failure.However,the network capacity cannot be infinite in the real net-work system.Therefore,how to reasonably allocate the limited capacity resources is of great significance.In this article,we put forward a capacity allocation strategy based on community structure against cascading failure.Experimental results indi-cate that the proposed method can reduce the scale of cascade failures with higher capacity utilization compared with Motter-Lai(ML)model.The advantage of our method is more obvious in scale-free network.Furthermore,the experiment shows that the cascade effect is more obvious when the vertex load is ran-domly varying.It is known to all that the growth of network capacity can make the network more resistant to destruction,but in this paper it is found that the contribution rate of unit capacity rises first and then decreases with the growth of net-work capacity cost.
