Quantitative relationship between nanosecond pulsed laser parameters and the characteristics of laser-generated ultrasonic waves in polycrystalline materials was evaluated.The high energy of the pulsed laser with a la...Quantitative relationship between nanosecond pulsed laser parameters and the characteristics of laser-generated ultrasonic waves in polycrystalline materials was evaluated.The high energy of the pulsed laser with a large irradiation spot simultaneously generated ultrasonic longitudinal and shear waves at the epicenter under the slight ablation regime.An optimized denoising technique based on wavelet thresholding and variational mode decomposition was applied to reduce noise in shear waves with a low signal-to-noise ratio.An approach for characterizing grain size was proposed using spectral central frequency ratio(SCFR)based on time-frequency analysis.The results demonstrate that the generation regime of ultrasonic waves is not solely determined by the laser power density;even at high power densities,a high energy with a large spot can generate an ultrasonic waveform dominated by the thermoelastic effect.This is ascribed to the intensification of the thermoelastic effect with the proportional increase in laser irradiation spot area for a given laser power density.Furthermore,both longitudinal and shear wave SCFRs are linearly related to grain size in polycrystalline materials;however,the shear wave SCFR is more sensitive to finer-grained materials.This study holds great significance for evaluating metal material properties using laser ultrasound.展开更多
Biofouling on ships and offshore structures has always been a difficult problem to solve,which not only jeopardizes the structural strength but also brings great economic losses.Ultrasonic cavitation is expected to so...Biofouling on ships and offshore structures has always been a difficult problem to solve,which not only jeopardizes the structural strength but also brings great economic losses.Ultrasonic cavitation is expected to solve this problem due to its characteristics of no damage to structures and no pollution.Starting from the phenomenon and mechanism of ultrasonic cleaning,this paper introduces the application of ultrasonic cavitation in ship,pipeline and oil cleaning as well as ballast water treatment.By reviewing the existing studies,limitations such as insufficient ultrasonic parameter studies,lack of uniform cleanliness standards,and insufficient cavitation studies are summarized to provide traceable research ideas for improving ultrasonic cavitation technology and to guide the expansion and improvement of its applications.展开更多
In response to the ultrasonic scalpels with the vibrational modal coupling which leads to a decrease in efficiency,an ultrasonic scalpel based on fusiform phononic crystals(PnCs)is proposed.An accurate theoretical mod...In response to the ultrasonic scalpels with the vibrational modal coupling which leads to a decrease in efficiency,an ultrasonic scalpel based on fusiform phononic crystals(PnCs)is proposed.An accurate theoretical model is constructed,which is mainly composed of electromechanical equivalent circuit models to analyze the frequency response function and the frequency response curves of the admittance.Bragg band gaps exist in the fusiform PnCs owing to the periodic constraint,which can suppress the corresponding vibrational modes.The vibration characteristics(vibration mode,frequency,and displacement distribution)of the ultrasonic scalpel are analyzed,and the validity of the electromechanical equivalent circuit method is verified.The results indicate that other vibration modes near the working frequency can be isolated.In addition,blades based on fusiform PnCs have a function akin to that of the horn,which enables displacement amplification.展开更多
Effective separation of residual carbon and ash is the basis for the resource utilization of coal gasification fine slag(CGFS).The conventional flotation process of CGFS has the bottlenecks of low carbon recovery and ...Effective separation of residual carbon and ash is the basis for the resource utilization of coal gasification fine slag(CGFS).The conventional flotation process of CGFS has the bottlenecks of low carbon recovery and high collector dosage.In order to address these issues,CGFS sample taken from Shaanxi,China was used as the study object in this paper.A new process of size classification-fine grain ultrasonic pretreatment flotation(SC-FGUF)was proposed and its separation effect was compared with that of wholegrain flotation(WGF)as well as size classification-fine grain flotation(SC-FGF).The mechanism of its enhanced separation effect was revealed through flotation kinetic fitting,flotation flow foam layer stability,particle size composition,surface morphology,pore structure,and surface chemical property analysis.The results showed that compared with WGF,pre-classification could reduce the collector dosage by 84.09%and the combination of pre-classification and ultrasonic pretreatment could increase the combustible recovery by 17.29%and up to 93.46%.The SC-FGUF process allows the ineffective adsorption of coarse residual carbon to collector during flotation stage to be reduced by pre-classification,and the tightly embedded state of fine CGFS particles is disrupted and surface oxidizing functional group occupancy was reduced by ultrasonic pretreatment,thus carbon and ash is easier to be separated in the flotation process.In addition,some of the residual carbon particles were broken down to smaller sizes in the ultrasonic pretreatment,which led to an increase in the stability of flotation flow foam layer and a decrease in the probability of detachment of residual carbon particles from the bubbles.Therefore,SCFGUF could increase the residual carbon recovery and reduce the flotation collector dosage,which is an innovative method for carbon-ash separation of CGFS with good application prospect.展开更多
Location awareness in wireless networks is essential for emergency services,navigation,gaming,and many other applications.This article presents a method for source localization based on measuring the amplitude-phase d...Location awareness in wireless networks is essential for emergency services,navigation,gaming,and many other applications.This article presents a method for source localization based on measuring the amplitude-phase distribution of the field at the base station.The existing scatterers in the target area create unique scattered field interference at each source location.The unique field interference at each source location results in a unique field signature at the base station which is used for source localization.In the proposed method,the target area is divided into a grid with a step of less than half the wavelength.Each grid node is characterized by its field signature at the base station.Field signatures corresponding to all nodes are normalized and stored in the base station as fingerprints for source localization.The normalization of the field signatures avoids the need for time synchronization between the base station and the source.When a source transmits signals,the generated field signature at the base station is normalized and then correlated with the stored fingerprints.The maximum correlation value is given by the node to which the source is the closest.Numerical simulations and results of experiments on ultrasonic waves in the air show that the ultrasonic source is correctly localized using broadband field signatures with one base station and without time synchronization.The proposed method is potentially applicable for indoor localization and navigation of mobile robots.展开更多
In a multi-bubble system, the bubble behavior is modulated by the primary acoustic field and the secondary acoustic field. To explore the translational motion of bubbles in cavitation liquids containing high-concentra...In a multi-bubble system, the bubble behavior is modulated by the primary acoustic field and the secondary acoustic field. To explore the translational motion of bubbles in cavitation liquids containing high-concentration cavitation nuclei,evolutions of bubbles are recorded by a high-speed camera, and translational trajectories of several representative bubbles are traced. It is found that translational motion of bubbles is always accompanied by the fragmentation and coalescence of bubbles, and for bubbles smaller than 10 μm, the possibility of bubble coalescence is enhanced when the spacing of bubbles is less than 30 μm. The measured signals and their spectra show the presence of strong negative pressure, broadband noise,and various harmonics, which implies that multiple interactions of bubbles appear in the region of high-intensity cavitation.Due to the strong coupling effect, the interaction between bubbles is random. A simplified triple-bubble model is developed to explore the interaction patterns of bubbles affected by the surrounding bubbles. Patterns of bubble interaction, such as attraction, repulsion, stable spacing, and rebound of bubbles, can be predicted by the theoretical analysis, and the obtained results are in good agreement with experimental observations. Mass exchange between the liquid and bubbles as well as absorption in the cavitation nuclei also plays an important role in multi-bubble cavitation, which may account for the weakening of the radial oscillations of bubbles.展开更多
We performed ultrasonic measurements on a quaternary cubic compound PrRu_(2)In_(2)Zn_(18) to explore the ground state properties derived from non-Kramers Γ_(3) doublet of Pr^(3+).PrRu_(2)In_(2)Zn_(18) is a quaternary...We performed ultrasonic measurements on a quaternary cubic compound PrRu_(2)In_(2)Zn_(18) to explore the ground state properties derived from non-Kramers Γ_(3) doublet of Pr^(3+).PrRu_(2)In_(2)Zn_(18) is a quaternary derivative of the ternary compound PrRu_(2)Zn_(20) that exhibits a structural phase transition at T_S=138 K.In PrRu_(2)In_(2)Zn_(18),the Zn atoms at the 16c site in PrRu_(2)Zn_(20) are selectively replaced by In atoms.A monotonic increase was observed in the temperature dependence of elastic constants C_L=(C_(11)+2C_(12)+4C_(44))/3 and C_(T)=(C_(11)-C_(12)+C_(44))/3 in the temperature range around T_(S) to which an elastic softening was observed in(C_(11)-C_(12))/2 for PrRu_(2)Zn_(20).The disappearance of the softening indicates that the structural transition in PrRu_(2)Zn_(20) is suppressed by the substitution of Zn ions by In ones with a larger ionic radius.Alternatively,the C_(T) of PrRu_(2)In_(2)Zn_(18) exhibits a precursor Curie-type elastic softening toward low temperatures being responsible for the non-Kramers Γ_(3) ground state.We discuss the ground state and the evolution of the elastic properties of the different single-crystal samples of PrRu_(2)In_(2)Zn_(18) grown under different conditions.展开更多
Pedestrian positioning system(PPS)using wearable inertial sensors has wide applications towards various emerging fields such as smart healthcare,emergency rescue,soldier positioning,etc.The performance of traditional ...Pedestrian positioning system(PPS)using wearable inertial sensors has wide applications towards various emerging fields such as smart healthcare,emergency rescue,soldier positioning,etc.The performance of traditional PPS is limited by the cumulative error of inertial sensors,complex motion modes of pedestrians,and the low robustness of the multi-sensor collaboration structure.This paper presents a hybrid pedestrian positioning system using the combination of wearable inertial sensors and ultrasonic ranging(H-PPS).A robust two nodes integration structure is developed to adaptively combine the motion data acquired from the single waist-mounted and foot-mounted node,and enhanced by a novel ellipsoid constraint model.In addition,a deep-learning-based walking speed estimator is proposed by considering all the motion features provided by different nodes,which effectively reduces the cumulative error originating from inertial sensors.Finally,a comprehensive data and model dual-driven model is presented to effectively combine the motion data provided by different sensor nodes and walking speed estimator,and multi-level constraints are extracted to further improve the performance of the overall system.Experimental results indicate that the proposed H-PPS significantly improves the performance of the single PPS and outperforms existing algorithms in accuracy index under complex indoor scenarios.展开更多
The Ultrasonic Electric Propulsion(UEP)system is a cutting-edge propulsion technology that is mostly used on platforms for small satellites(less than 10 kg).The characteristics of droplet partial emissions(DPEs)in the...The Ultrasonic Electric Propulsion(UEP)system is a cutting-edge propulsion technology that is mostly used on platforms for small satellites(less than 10 kg).The characteristics of droplet partial emissions(DPEs)in the UEP system are investigated using a high-speed imaging technique(an ultra-high speed camera(NAC HX-6)and a long-distance microscope)in this work.The experiments demonstrate that there are a few partial emission modes,including left-side emission,double-side emission,and right-side emission,that are present in the droplet emission process of the UEP system.These modes are primarily caused by the partial formation of capillary standing waves(CSWs)on the emission surface of the ultrasonic nozzle.The emission rate for single-and double-sided emissions varies at different times,indicating that there are different CSWs engaged in droplet emission due to variations in the liquid film thickness and charge state of the liquid cones.Additionally,as the droplets emit continuously,a raised area on the emission surface appears,with several droplets emitting there as a result of charge accumulation.Additionally,photos of the CSWs with emitting droplets are obtained,which highlights the CSWs'distinctive wave morphology.展开更多
The appearance and accumulation of internal impact damage seriously influence overall performance of carbon fiber reinforced plastic(CFRP).Thus,this study evaluates the change in impact damage number by using linear a...The appearance and accumulation of internal impact damage seriously influence overall performance of carbon fiber reinforced plastic(CFRP).Thus,this study evaluates the change in impact damage number by using linear and nonlinear ultrasonic Lamb wave detection methods,and compares these two detection results.An ultrasonic wave simulation model for composite structure with impact damage is established using the finite element method,and the interaction between impact damage and the ultrasonic wave is simulated.Simulation results demonstrate that the ultrasonic amplitude linearly decreases,and the relative nonlinear parameter linearly increases in proportion to the impact number,respectively.The linear-fitting slope of nonlinear parameter is 0.38 per impact number at an input frequency of 1.0 MHz.It is far higher than that of the linear ultrasonic amplitude,which is only-0.12.However,with the increase of impact damage,the linear growth of nonlinear parameters mainly depends on the decrease in ultrasonic amplitude rather than the accumulation of second harmonic amplitude.In the linear ultrasonic amplitude detection,the linear fitting slope at 1.1 MHz is-0.14,which is lower than those at 0.9 MHz and 1.0 MHz.Meanwhile,in the nonlinear ultrasonic parameter detection,the linear fitting slope at 1.1 MHz is 0.92,which is higher than those at 0.9 MHz and 1.0 MHz.The results show that higher frequencies lead to greater attenuation of ultrasonic amplitude and a larger increase in nonlinear parameters,which can enhance the sensitivity of both linear and nonlinear ultrasonic detections.The accuracy of simulation results is demonstrated through the low-velocity impact and ultrasonic experiments.The results show that compared with nonlinear ultrasonic technology,the linear ultrasonic technology is more suitable for impact damage assessment of carbon fiber reinforced plastic because of its simpler detection process and higher sensitivity.展开更多
Due to the overlapping of echoes from the inner and outer walls of thin⁃walled tubes,thickness measurement based on ultrasonic time⁃of⁃flight method is difficult to apply.Therefore,the ultrasonic resonance method has ...Due to the overlapping of echoes from the inner and outer walls of thin⁃walled tubes,thickness measurement based on ultrasonic time⁃of⁃flight method is difficult to apply.Therefore,the ultrasonic resonance method has become an effective mean of measuring thin⁃walled tube thickness.The resonance method often demands a perpendicular incidence of ultrasound,but having the ultrasonic probe strictly perpendicular to the measured surface is challenging for installation reasons.The ultrasonic resonance model by considering ultrasonic inclination angles is derived.The model explains that an inclination angle theoretically does not affect the calculation results of measuring thin thickness.However,increasing the inclination angle reduces the reflection coefficient,resulting in a shorter length of the effective reflected wave,thus reducing the calculation accuracy.Additionally,the research evaluated the ultrasonic echo from the tubes of different diameters and found that if ultrasound transmits with an inclined incidence,smaller diameter tubes result in lower normal reflection coefficients,leading to poorer measurement accuracy.The research simulated and tested the tilted⁃incidence resonant method based on the subject of water⁃steel⁃air,and the results prove the correctness of the model.展开更多
Ultrasonic extraction technique was used to extract perflurooctanoic acid (PFOA) and its salts from fluro-paints.The extract was quantified after filtration and concentration by gas chromatography-mass (GC-MS) method ...Ultrasonic extraction technique was used to extract perflurooctanoic acid (PFOA) and its salts from fluro-paints.The extract was quantified after filtration and concentration by gas chromatography-mass (GC-MS) method using perflurodecanoic acid methyl ester as an internal standard.The GC-MS conditions were: HP-Innowax capillary column; oven temperature,50℃(5 min)30℃/min240℃(5 min); splittless mode; injection volume,1μL; negative chemical ion source,reacting gas,CH4,20%; select ion scan mode (SIM);Line range was 1.0-1.0×105 μg/L; the correlation coefficient was 0.999; the low limit of detection (LOD) was 0.1 μg/L.The RSD was 4.24% and 3.58% respectively for low and high concentration of PFOA,and the average recovery was between 86%-111%.展开更多
A two degrees of freedom （DOF） positioning stage using novel linear ultrasonic motors is presented. The stage mainly consists of two linear ultrasonic motors, linear guides and tables. It can realize the long stroke...A two degrees of freedom （DOF） positioning stage using novel linear ultrasonic motors is presented. The stage mainly consists of two linear ultrasonic motors, linear guides and tables. It can realize the long stroke and reversible controlled motion in two directions. The wheel-shape linear ultrasonic motor applied in the stage utilizes two fourth-bending modes of non-uniform beam in orthogonal directions. Quick response, no backlash, high resolution, power-off self-braking, and long stroke are the attractive characteristics of the linear positioning stage. Experimental results show that z and y-direction tables can reach the destination without overshoot and the error is less than 2μm by using two linear encoders with a resolution of 1 μm. In the open-loop mode, the positioning stage achieves 1μm resolution at 0. 25 ms driving time.展开更多
The operating principle of a lead screw linear ultrasonic motor using bending vibration modes is analyzed. The simplified beam bending vibration model is used to analyze the dynamics characteristics of the motor. Moti...The operating principle of a lead screw linear ultrasonic motor using bending vibration modes is analyzed. The simplified beam bending vibration model is used to analyze the dynamics characteristics of the motor. Motion trajectory equations are derived for driving points of the stator. The motor operation and driving mechanisms are investigated. The vibration modes and the construction of the motor are analyzed by using the finite element method （FEM）. A prototype motor is built and its stator dimension is 13 mm × 13 mm× 30 mm. The motor is experimentally characterized and the maximum output force of 5- 2 N is obtained.展开更多
A new rod-shaped traveling wave ultrasonic micromotor is developed. In the micromotor, five pieces of piezoelectric ceramics clamped by two metal cylinders are used as its stator. The driving principle of the rodshape...A new rod-shaped traveling wave ultrasonic micromotor is developed. In the micromotor, five pieces of piezoelectric ceramics clamped by two metal cylinders are used as its stator. The driving principle of the rodshaped ultrasonic motor is simulated. The stator structure and the position to lay these piezoelectric ceramics are calculated to improve the electro mechanical conversion efficiency. A flexible rotor is designed to reduce the radial slip between the stator and the rotor, and to improve the motor efficiency. The prototype motor and its micror driver are tested. The motor is 9 mm in out-diameter, 15 mm in length and 3.2 g in weight. When the motor operates with the first bending frequency （72 kHz） of the stator, its maximal rotational speed and the torque reach 520 r/rain and 4.5 mN · m. Results show that the motor has good stability. The speed fluctuation is controlled within 3% by the frequency automatic tracking technique.展开更多
The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber ...The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber grades authority （NLGA） for structure light framing and structure joists and planks. The properties of apparent density was determined at 15% moisture content, bending strength and stiffness were tested according to American Society for Testing and Materials （ASTM） D198-99, and dynamic modulus of elasticity （Eusw） was measured by ultrasonic technique, for predicting the flexural properties of different grade lumbers. The results showed that Eosw was larger than the static MOE. The relationship between Eusw and static MOE was significant at 0.01 level, and the determination coefficients （R2） of the four grade lumbers followed the sequence as R^2No.2 （0.616）〉 R^2ss （0.567）〉 R^2No1 （0.366）〉 R^2No.3 （0.137）. The R^2 of Fusw and MOR were lower than that of the Etru and MOR for each grade. The Eusw of all the grade lumbers, except No.3-grade, had significant correlation with the static MOE and MOR, thus the bending strengthof those grade lumbers can be estimated by the E The Etru valuesof four grade lumbers followed a sequence as No.2-grade （10.701 GPa） 〉 SS-grade （10.359 GPa） 〉 No.l-grade （9.840 GPa） 〉 No.3-grade （9.554 GPa）. For the same grade dimension lumber, its Eusw value was larger than static MOE. Mean values of MOR for four grade lumbers follow a sequence as No.2-grade （48.67 MPa） 〉 SS-grade （48.16 MPa） 〉 No.3-grade （46.55 MPa） 〉 No. 1-grade （43.39MPa）.展开更多
The determination method of 10-hydroxycamptothecin in Camptotheca acuminata fruits by high-performance liquid chromatogram (HPLC) was studied. The HPLC analysis was performed on a HIQ sil C18(4.6×250 mm) column w...The determination method of 10-hydroxycamptothecin in Camptotheca acuminata fruits by high-performance liquid chromatogram (HPLC) was studied. The HPLC analysis was performed on a HIQ sil C18(4.6×250 mm) column with mobile phase of acetonitrilewater (3:7, V:V), flow rate 1 mLmin-1 and UV detective wavelength 266 nm. Extracting 10-hydroxycamptothecin by ultrasonic method from fruits of C. acuminata to prepare samples for analysis was systematically discussed. The optimal extraction condition was carried out by 60% alcohol solution at 60℃ for 50 minutes.展开更多
A new type of linear ultrasonic motor with two degrees of freedom (DOF) motion is presented. The concept of the new typical motor is based on the combination of a longitudinal and two bending modes. The construction a...A new type of linear ultrasonic motor with two degrees of freedom (DOF) motion is presented. The concept of the new typical motor is based on the combination of a longitudinal and two bending modes. The construction and the operational principle of motor are described, and the elliptical motion of the driving point of the actuator is proved. Meanwhile, a prototype linear motor is designed by using the finite element method (FEM) and is constructed for experiments. The vibration modes are tested with the laser doppler vibrometer (PSV-300F), and the experimental results prove that the design requirements on the mode shape of the actuator and nature frequency are satisfied. The test run of the motor indicates that the operational principle of the motor and the design results are correct, and the output properties are also tested.展开更多
A linear ultrasonic motor using longitudinal vibration of bar with varying section is proposed. The lin- ear ultrasonic motor has two varying section bars connected by semi-circumferential structure. Elliptical trajec...A linear ultrasonic motor using longitudinal vibration of bar with varying section is proposed. The lin- ear ultrasonic motor has two varying section bars connected by semi-circumferential structure. Elliptical trajecto- ries of particles are formed on top of the semi-circumferential structure outer surface where a driving foot is locat- ed. And a mover is pushed to move linearly when the driving foot is pressed onto it. Finite element model of sta- tor is built and results of harmonic analysis verify its principle. Moreover, design requirements of the motor are analyzed through finite element analysis and the results of sensitive analysis provide an efficient way to design the type of linear ultrasonic motor. Prototype test shows that the motor can afford load of 10 N at the speed of 100 mm/s.展开更多
Seven extracting temperatures （25, 35, 45, 55, 65, 75, 85℃） and extracting time （30, 40, 50, 60, 70, 80, 90 min） were designed for selecting the optimal extracting time and extracting temperature for ultrasonic e...Seven extracting temperatures （25, 35, 45, 55, 65, 75, 85℃） and extracting time （30, 40, 50, 60, 70, 80, 90 min） were designed for selecting the optimal extracting time and extracting temperature for ultrasonic extraction of T. amurensis flowers. Polysaccharides from T. amurensis flowers were isolated and determined by spectrophotometry. Results show that the optimal ultrasonic temperature was 75℃ and ex tracting time 52 min. The content of polysaccharides in T. amurensis flowers measured by anthrone--H2SO4 colorimetry under 580 nm, was 9.74% with 0.47% of relative standard deviation （RSD, n=3）. This study demonstrated that ultrasonic extraction method was simple, and the color of the treated samples was stable in 4 h. The average recovery value for the polysaccharides measured was 99.48%±1.01%, with 0.112% of RSD （n=3）.展开更多
基金supported in part by the Natural Science Foundation of Shandong Province,China (Grant No.ZR2023ME073)the National Natural Science Foundation of China (Grant No.51805304)+1 种基金the Education Department of Shandong Province,China (Grant No.2022KJ130)Qilu University of Technology (Shandong Academy of Sciences),China (Grant Nos.2023PY009,2021JC02008 and 2022GH005)。
文摘Quantitative relationship between nanosecond pulsed laser parameters and the characteristics of laser-generated ultrasonic waves in polycrystalline materials was evaluated.The high energy of the pulsed laser with a large irradiation spot simultaneously generated ultrasonic longitudinal and shear waves at the epicenter under the slight ablation regime.An optimized denoising technique based on wavelet thresholding and variational mode decomposition was applied to reduce noise in shear waves with a low signal-to-noise ratio.An approach for characterizing grain size was proposed using spectral central frequency ratio(SCFR)based on time-frequency analysis.The results demonstrate that the generation regime of ultrasonic waves is not solely determined by the laser power density;even at high power densities,a high energy with a large spot can generate an ultrasonic waveform dominated by the thermoelastic effect.This is ascribed to the intensification of the thermoelastic effect with the proportional increase in laser irradiation spot area for a given laser power density.Furthermore,both longitudinal and shear wave SCFRs are linearly related to grain size in polycrystalline materials;however,the shear wave SCFR is more sensitive to finer-grained materials.This study holds great significance for evaluating metal material properties using laser ultrasound.
基金Supported by the National Natural Science Foundation of China(No.52101373)Shenzhen Science and Technology Program(No.CYJ20230807145621043)+2 种基金Postdoctoral Science Foundation of China(No.2021M692629)Young Talent Fund of the University Association for Science and Technology in Shaanxi,China(No.20210417)Fundamental Research Funds for the Central Universities(No.3102021HHZY030009).
文摘Biofouling on ships and offshore structures has always been a difficult problem to solve,which not only jeopardizes the structural strength but also brings great economic losses.Ultrasonic cavitation is expected to solve this problem due to its characteristics of no damage to structures and no pollution.Starting from the phenomenon and mechanism of ultrasonic cleaning,this paper introduces the application of ultrasonic cavitation in ship,pipeline and oil cleaning as well as ballast water treatment.By reviewing the existing studies,limitations such as insufficient ultrasonic parameter studies,lack of uniform cleanliness standards,and insufficient cavitation studies are summarized to provide traceable research ideas for improving ultrasonic cavitation technology and to guide the expansion and improvement of its applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.62204112,12174240,and 11874253)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20220774).
文摘In response to the ultrasonic scalpels with the vibrational modal coupling which leads to a decrease in efficiency,an ultrasonic scalpel based on fusiform phononic crystals(PnCs)is proposed.An accurate theoretical model is constructed,which is mainly composed of electromechanical equivalent circuit models to analyze the frequency response function and the frequency response curves of the admittance.Bragg band gaps exist in the fusiform PnCs owing to the periodic constraint,which can suppress the corresponding vibrational modes.The vibration characteristics(vibration mode,frequency,and displacement distribution)of the ultrasonic scalpel are analyzed,and the validity of the electromechanical equivalent circuit method is verified.The results indicate that other vibration modes near the working frequency can be isolated.In addition,blades based on fusiform PnCs have a function akin to that of the horn,which enables displacement amplification.
基金supported by the National Natural Science Foundation of China(No.52374279)the Natural Science Foundation of Shaanxi Province(No.2023-YBGY-055).
文摘Effective separation of residual carbon and ash is the basis for the resource utilization of coal gasification fine slag(CGFS).The conventional flotation process of CGFS has the bottlenecks of low carbon recovery and high collector dosage.In order to address these issues,CGFS sample taken from Shaanxi,China was used as the study object in this paper.A new process of size classification-fine grain ultrasonic pretreatment flotation(SC-FGUF)was proposed and its separation effect was compared with that of wholegrain flotation(WGF)as well as size classification-fine grain flotation(SC-FGF).The mechanism of its enhanced separation effect was revealed through flotation kinetic fitting,flotation flow foam layer stability,particle size composition,surface morphology,pore structure,and surface chemical property analysis.The results showed that compared with WGF,pre-classification could reduce the collector dosage by 84.09%and the combination of pre-classification and ultrasonic pretreatment could increase the combustible recovery by 17.29%and up to 93.46%.The SC-FGUF process allows the ineffective adsorption of coarse residual carbon to collector during flotation stage to be reduced by pre-classification,and the tightly embedded state of fine CGFS particles is disrupted and surface oxidizing functional group occupancy was reduced by ultrasonic pretreatment,thus carbon and ash is easier to be separated in the flotation process.In addition,some of the residual carbon particles were broken down to smaller sizes in the ultrasonic pretreatment,which led to an increase in the stability of flotation flow foam layer and a decrease in the probability of detachment of residual carbon particles from the bubbles.Therefore,SCFGUF could increase the residual carbon recovery and reduce the flotation collector dosage,which is an innovative method for carbon-ash separation of CGFS with good application prospect.
基金supported by the Tomsk State University Competitiveness Improvement Program under Grant No.2.4.2.23 IG.
文摘Location awareness in wireless networks is essential for emergency services,navigation,gaming,and many other applications.This article presents a method for source localization based on measuring the amplitude-phase distribution of the field at the base station.The existing scatterers in the target area create unique scattered field interference at each source location.The unique field interference at each source location results in a unique field signature at the base station which is used for source localization.In the proposed method,the target area is divided into a grid with a step of less than half the wavelength.Each grid node is characterized by its field signature at the base station.Field signatures corresponding to all nodes are normalized and stored in the base station as fingerprints for source localization.The normalization of the field signatures avoids the need for time synchronization between the base station and the source.When a source transmits signals,the generated field signature at the base station is normalized and then correlated with the stored fingerprints.The maximum correlation value is given by the node to which the source is the closest.Numerical simulations and results of experiments on ultrasonic waves in the air show that the ultrasonic source is correctly localized using broadband field signatures with one base station and without time synchronization.The proposed method is potentially applicable for indoor localization and navigation of mobile robots.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11974232 and 12374441)the Fund from the Yulin Science and Technology Bureau,China(Grant No.CXY-2022-178).
文摘In a multi-bubble system, the bubble behavior is modulated by the primary acoustic field and the secondary acoustic field. To explore the translational motion of bubbles in cavitation liquids containing high-concentration cavitation nuclei,evolutions of bubbles are recorded by a high-speed camera, and translational trajectories of several representative bubbles are traced. It is found that translational motion of bubbles is always accompanied by the fragmentation and coalescence of bubbles, and for bubbles smaller than 10 μm, the possibility of bubble coalescence is enhanced when the spacing of bubbles is less than 30 μm. The measured signals and their spectra show the presence of strong negative pressure, broadband noise,and various harmonics, which implies that multiple interactions of bubbles appear in the region of high-intensity cavitation.Due to the strong coupling effect, the interaction between bubbles is random. A simplified triple-bubble model is developed to explore the interaction patterns of bubbles affected by the surrounding bubbles. Patterns of bubble interaction, such as attraction, repulsion, stable spacing, and rebound of bubbles, can be predicted by the theoretical analysis, and the obtained results are in good agreement with experimental observations. Mass exchange between the liquid and bubbles as well as absorption in the cavitation nuclei also plays an important role in multi-bubble cavitation, which may account for the weakening of the radial oscillations of bubbles.
基金Project supported by the Soft-Path Science and Engineering Research Center (SPERC),Iwate Universitythe JSPS KAKENHI (Grant Nos. JP18K03530,JP21K04622, and JP21K13869)。
文摘We performed ultrasonic measurements on a quaternary cubic compound PrRu_(2)In_(2)Zn_(18) to explore the ground state properties derived from non-Kramers Γ_(3) doublet of Pr^(3+).PrRu_(2)In_(2)Zn_(18) is a quaternary derivative of the ternary compound PrRu_(2)Zn_(20) that exhibits a structural phase transition at T_S=138 K.In PrRu_(2)In_(2)Zn_(18),the Zn atoms at the 16c site in PrRu_(2)Zn_(20) are selectively replaced by In atoms.A monotonic increase was observed in the temperature dependence of elastic constants C_L=(C_(11)+2C_(12)+4C_(44))/3 and C_(T)=(C_(11)-C_(12)+C_(44))/3 in the temperature range around T_(S) to which an elastic softening was observed in(C_(11)-C_(12))/2 for PrRu_(2)Zn_(20).The disappearance of the softening indicates that the structural transition in PrRu_(2)Zn_(20) is suppressed by the substitution of Zn ions by In ones with a larger ionic radius.Alternatively,the C_(T) of PrRu_(2)In_(2)Zn_(18) exhibits a precursor Curie-type elastic softening toward low temperatures being responsible for the non-Kramers Γ_(3) ground state.We discuss the ground state and the evolution of the elastic properties of the different single-crystal samples of PrRu_(2)In_(2)Zn_(18) grown under different conditions.
基金supported by the National Natural Science Foundation of China under(Grant No.52175531)in part by the Science and Technology Research Program of Chongqing Municipal Education Commission under Grant(Grant Nos.KJQN202000605 and KJZD-M202000602)。
文摘Pedestrian positioning system(PPS)using wearable inertial sensors has wide applications towards various emerging fields such as smart healthcare,emergency rescue,soldier positioning,etc.The performance of traditional PPS is limited by the cumulative error of inertial sensors,complex motion modes of pedestrians,and the low robustness of the multi-sensor collaboration structure.This paper presents a hybrid pedestrian positioning system using the combination of wearable inertial sensors and ultrasonic ranging(H-PPS).A robust two nodes integration structure is developed to adaptively combine the motion data acquired from the single waist-mounted and foot-mounted node,and enhanced by a novel ellipsoid constraint model.In addition,a deep-learning-based walking speed estimator is proposed by considering all the motion features provided by different nodes,which effectively reduces the cumulative error originating from inertial sensors.Finally,a comprehensive data and model dual-driven model is presented to effectively combine the motion data provided by different sensor nodes and walking speed estimator,and multi-level constraints are extracted to further improve the performance of the overall system.Experimental results indicate that the proposed H-PPS significantly improves the performance of the single PPS and outperforms existing algorithms in accuracy index under complex indoor scenarios.
基金supported by National Natural Science Foundation of China(No.12102099)the National Key R&D Program of China(No.2021YFC2202700)the Outstanding Academic Leader Project of Shanghai(Youth)(No.23XD1421700),respectively。
文摘The Ultrasonic Electric Propulsion(UEP)system is a cutting-edge propulsion technology that is mostly used on platforms for small satellites(less than 10 kg).The characteristics of droplet partial emissions(DPEs)in the UEP system are investigated using a high-speed imaging technique(an ultra-high speed camera(NAC HX-6)and a long-distance microscope)in this work.The experiments demonstrate that there are a few partial emission modes,including left-side emission,double-side emission,and right-side emission,that are present in the droplet emission process of the UEP system.These modes are primarily caused by the partial formation of capillary standing waves(CSWs)on the emission surface of the ultrasonic nozzle.The emission rate for single-and double-sided emissions varies at different times,indicating that there are different CSWs engaged in droplet emission due to variations in the liquid film thickness and charge state of the liquid cones.Additionally,as the droplets emit continuously,a raised area on the emission surface appears,with several droplets emitting there as a result of charge accumulation.Additionally,photos of the CSWs with emitting droplets are obtained,which highlights the CSWs'distinctive wave morphology.
基金supported by the Na⁃tional Natural Science Foundation of China(No.11972016)the Natural Science Foundation of the Jiangsu Higher Educa⁃tion Institutions of China(No.23KJD460005)Scientif⁃ic Research Foundation for the Introduction of Talent in Nan⁃jing Vocational University of Industry Technology(No.YK21-04-02).
文摘The appearance and accumulation of internal impact damage seriously influence overall performance of carbon fiber reinforced plastic(CFRP).Thus,this study evaluates the change in impact damage number by using linear and nonlinear ultrasonic Lamb wave detection methods,and compares these two detection results.An ultrasonic wave simulation model for composite structure with impact damage is established using the finite element method,and the interaction between impact damage and the ultrasonic wave is simulated.Simulation results demonstrate that the ultrasonic amplitude linearly decreases,and the relative nonlinear parameter linearly increases in proportion to the impact number,respectively.The linear-fitting slope of nonlinear parameter is 0.38 per impact number at an input frequency of 1.0 MHz.It is far higher than that of the linear ultrasonic amplitude,which is only-0.12.However,with the increase of impact damage,the linear growth of nonlinear parameters mainly depends on the decrease in ultrasonic amplitude rather than the accumulation of second harmonic amplitude.In the linear ultrasonic amplitude detection,the linear fitting slope at 1.1 MHz is-0.14,which is lower than those at 0.9 MHz and 1.0 MHz.Meanwhile,in the nonlinear ultrasonic parameter detection,the linear fitting slope at 1.1 MHz is 0.92,which is higher than those at 0.9 MHz and 1.0 MHz.The results show that higher frequencies lead to greater attenuation of ultrasonic amplitude and a larger increase in nonlinear parameters,which can enhance the sensitivity of both linear and nonlinear ultrasonic detections.The accuracy of simulation results is demonstrated through the low-velocity impact and ultrasonic experiments.The results show that compared with nonlinear ultrasonic technology,the linear ultrasonic technology is more suitable for impact damage assessment of carbon fiber reinforced plastic because of its simpler detection process and higher sensitivity.
文摘Due to the overlapping of echoes from the inner and outer walls of thin⁃walled tubes,thickness measurement based on ultrasonic time⁃of⁃flight method is difficult to apply.Therefore,the ultrasonic resonance method has become an effective mean of measuring thin⁃walled tube thickness.The resonance method often demands a perpendicular incidence of ultrasound,but having the ultrasonic probe strictly perpendicular to the measured surface is challenging for installation reasons.The ultrasonic resonance model by considering ultrasonic inclination angles is derived.The model explains that an inclination angle theoretically does not affect the calculation results of measuring thin thickness.However,increasing the inclination angle reduces the reflection coefficient,resulting in a shorter length of the effective reflected wave,thus reducing the calculation accuracy.Additionally,the research evaluated the ultrasonic echo from the tubes of different diameters and found that if ultrasound transmits with an inclined incidence,smaller diameter tubes result in lower normal reflection coefficients,leading to poorer measurement accuracy.The research simulated and tested the tilted⁃incidence resonant method based on the subject of water⁃steel⁃air,and the results prove the correctness of the model.
文摘Ultrasonic extraction technique was used to extract perflurooctanoic acid (PFOA) and its salts from fluro-paints.The extract was quantified after filtration and concentration by gas chromatography-mass (GC-MS) method using perflurodecanoic acid methyl ester as an internal standard.The GC-MS conditions were: HP-Innowax capillary column; oven temperature,50℃(5 min)30℃/min240℃(5 min); splittless mode; injection volume,1μL; negative chemical ion source,reacting gas,CH4,20%; select ion scan mode (SIM);Line range was 1.0-1.0×105 μg/L; the correlation coefficient was 0.999; the low limit of detection (LOD) was 0.1 μg/L.The RSD was 4.24% and 3.58% respectively for low and high concentration of PFOA,and the average recovery was between 86%-111%.
基金the National Natural Science Foundation of China (50735002)~~
文摘A two degrees of freedom （DOF） positioning stage using novel linear ultrasonic motors is presented. The stage mainly consists of two linear ultrasonic motors, linear guides and tables. It can realize the long stroke and reversible controlled motion in two directions. The wheel-shape linear ultrasonic motor applied in the stage utilizes two fourth-bending modes of non-uniform beam in orthogonal directions. Quick response, no backlash, high resolution, power-off self-braking, and long stroke are the attractive characteristics of the linear positioning stage. Experimental results show that z and y-direction tables can reach the destination without overshoot and the error is less than 2μm by using two linear encoders with a resolution of 1 μm. In the open-loop mode, the positioning stage achieves 1μm resolution at 0. 25 ms driving time.
基金Supported by the National Natural Science Foundation of China(50575103, 50735002)~~
文摘The operating principle of a lead screw linear ultrasonic motor using bending vibration modes is analyzed. The simplified beam bending vibration model is used to analyze the dynamics characteristics of the motor. Motion trajectory equations are derived for driving points of the stator. The motor operation and driving mechanisms are investigated. The vibration modes and the construction of the motor are analyzed by using the finite element method （FEM）. A prototype motor is built and its stator dimension is 13 mm × 13 mm× 30 mm. The motor is experimentally characterized and the maximum output force of 5- 2 N is obtained.
文摘A new rod-shaped traveling wave ultrasonic micromotor is developed. In the micromotor, five pieces of piezoelectric ceramics clamped by two metal cylinders are used as its stator. The driving principle of the rodshaped ultrasonic motor is simulated. The stator structure and the position to lay these piezoelectric ceramics are calculated to improve the electro mechanical conversion efficiency. A flexible rotor is designed to reduce the radial slip between the stator and the rotor, and to improve the motor efficiency. The prototype motor and its micror driver are tested. The motor is 9 mm in out-diameter, 15 mm in length and 3.2 g in weight. When the motor operates with the first bending frequency （72 kHz） of the stator, its maximal rotational speed and the torque reach 520 r/rain and 4.5 mN · m. Results show that the motor has good stability. The speed fluctuation is controlled within 3% by the frequency automatic tracking technique.
基金Standard system on forestry engineering of Ministry ofScience and Technology ( 2004DEA70900-1).
文摘The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber grades authority （NLGA） for structure light framing and structure joists and planks. The properties of apparent density was determined at 15% moisture content, bending strength and stiffness were tested according to American Society for Testing and Materials （ASTM） D198-99, and dynamic modulus of elasticity （Eusw） was measured by ultrasonic technique, for predicting the flexural properties of different grade lumbers. The results showed that Eosw was larger than the static MOE. The relationship between Eusw and static MOE was significant at 0.01 level, and the determination coefficients （R2） of the four grade lumbers followed the sequence as R^2No.2 （0.616）〉 R^2ss （0.567）〉 R^2No1 （0.366）〉 R^2No.3 （0.137）. The R^2 of Fusw and MOR were lower than that of the Etru and MOR for each grade. The Eusw of all the grade lumbers, except No.3-grade, had significant correlation with the static MOE and MOR, thus the bending strengthof those grade lumbers can be estimated by the E The Etru valuesof four grade lumbers followed a sequence as No.2-grade （10.701 GPa） 〉 SS-grade （10.359 GPa） 〉 No.l-grade （9.840 GPa） 〉 No.3-grade （9.554 GPa）. For the same grade dimension lumber, its Eusw value was larger than static MOE. Mean values of MOR for four grade lumbers follow a sequence as No.2-grade （48.67 MPa） 〉 SS-grade （48.16 MPa） 〉 No.3-grade （46.55 MPa） 〉 No. 1-grade （43.39MPa）.
基金This paper was supported by National Natural Science Foundation of China (No. 30070086).
文摘The determination method of 10-hydroxycamptothecin in Camptotheca acuminata fruits by high-performance liquid chromatogram (HPLC) was studied. The HPLC analysis was performed on a HIQ sil C18(4.6×250 mm) column with mobile phase of acetonitrilewater (3:7, V:V), flow rate 1 mLmin-1 and UV detective wavelength 266 nm. Extracting 10-hydroxycamptothecin by ultrasonic method from fruits of C. acuminata to prepare samples for analysis was systematically discussed. The optimal extraction condition was carried out by 60% alcohol solution at 60℃ for 50 minutes.
文摘A new type of linear ultrasonic motor with two degrees of freedom (DOF) motion is presented. The concept of the new typical motor is based on the combination of a longitudinal and two bending modes. The construction and the operational principle of motor are described, and the elliptical motion of the driving point of the actuator is proved. Meanwhile, a prototype linear motor is designed by using the finite element method (FEM) and is constructed for experiments. The vibration modes are tested with the laser doppler vibrometer (PSV-300F), and the experimental results prove that the design requirements on the mode shape of the actuator and nature frequency are satisfied. The test run of the motor indicates that the operational principle of the motor and the design results are correct, and the output properties are also tested.
基金Supported by the National Natural Science Foundation of China(50735002)~~
文摘A linear ultrasonic motor using longitudinal vibration of bar with varying section is proposed. The lin- ear ultrasonic motor has two varying section bars connected by semi-circumferential structure. Elliptical trajecto- ries of particles are formed on top of the semi-circumferential structure outer surface where a driving foot is locat- ed. And a mover is pushed to move linearly when the driving foot is pressed onto it. Finite element model of sta- tor is built and results of harmonic analysis verify its principle. Moreover, design requirements of the motor are analyzed through finite element analysis and the results of sensitive analysis provide an efficient way to design the type of linear ultrasonic motor. Prototype test shows that the motor can afford load of 10 N at the speed of 100 mm/s.
基金funded by Heilongjiang Tackle Key Program of Science and Technology(GB07B303-03)
文摘Seven extracting temperatures （25, 35, 45, 55, 65, 75, 85℃） and extracting time （30, 40, 50, 60, 70, 80, 90 min） were designed for selecting the optimal extracting time and extracting temperature for ultrasonic extraction of T. amurensis flowers. Polysaccharides from T. amurensis flowers were isolated and determined by spectrophotometry. Results show that the optimal ultrasonic temperature was 75℃ and ex tracting time 52 min. The content of polysaccharides in T. amurensis flowers measured by anthrone--H2SO4 colorimetry under 580 nm, was 9.74% with 0.47% of relative standard deviation （RSD, n=3）. This study demonstrated that ultrasonic extraction method was simple, and the color of the treated samples was stable in 4 h. The average recovery value for the polysaccharides measured was 99.48%±1.01%, with 0.112% of RSD （n=3）.
