The influence of enlarged section parameters on pressure transients of high-speed train passing through a tunnel was investigated by numerical simulation.The calculation results obtained by the structured and unstruct...The influence of enlarged section parameters on pressure transients of high-speed train passing through a tunnel was investigated by numerical simulation.The calculation results obtained by the structured and unstructured grid and the experimental results of smooth wall tunnel were verified.Numerical simulation studies were conducted on three tunnel enlarged section parameters,the enlarged section distribution along circumferential direction,the enlarged section area and the enlarged section distribution along tunnel length direction.The calculation results show that the influence of the different enlarged section distributions along tunnel circumferential direction on pressure transients in the tunnel is basically consistent.There is an optimal enlarged section area for the minimum value of the pressure variation amplitude and the average pressure variation in the tunnel.The law of the pressure variation amplitude and the average pressure variation of the enlarged section distribution along tunnel length direction are obtained.展开更多
The microstructure and electrical properties of ZnO-Bi2O3-Yb2O3 based varistor ceramics were investigated with various temperature effects from 900°C to 1050°C.From the results,it was observed that the incre...The microstructure and electrical properties of ZnO-Bi2O3-Yb2O3 based varistor ceramics were investigated with various temperature effects from 900°C to 1050°C.From the results,it was observed that the increase of sintering temperature offers a reduced capacitive effect from 0.460 nF to 0.321 nF.Furthermore,the grain sizes of varistors were varied from 6.8μm to 9.8μm.The consequence of such smaller grain sizes provided a better voltage gradient of about 895 V/mm for the disc sintered at 900°C and fallen drastically to 410 V/mm for the sample sintered at 1050°C.In addition,there was an increase of non-linearity index to a maximum value of 36.0 and reduced leakage current of 0.026 mA/cm2.However,the density of the varistor decreased with an increase of temperature from 5.41 g/cm3 to 5.24 g/cm3.With this base,the influence of varistor capacitance and high voltage gradient were scrutinized and it led an improved transition speed of the varistor assembly from non-conduction to conduction mode during intruding nanosecond transients.展开更多
Background Cotton is an important crop providing the most natural fibers all over the world. The cotton genomics community has utilized whole genome sequencing data to construct an elite gene pool in which functional ...Background Cotton is an important crop providing the most natural fibers all over the world. The cotton genomics community has utilized whole genome sequencing data to construct an elite gene pool in which functional genes are related to agronomic traits. However, the functional validation of these genes is hindered by time-consuming and inefficient genetic transformation methods. Thus, establishing a transient transformation system of high efficiency is necessary for cotton genomics.Results To improve the efficiency of transient transformation, we used the protoplasts isolated from the etiolated cotyledon as recipient. The enzymatic digestion buffer comprised 1.5%(w/v) cellulase, 0.75%(w/v) macerozyme, and 1% hemicellulase, osmotically buffered with 0.4 mol·L^(-1) mannitol. After 5 h of dark incubation at 25℃, uniform cotton protoplasts were successfully isolated with a yield of 4.6 × 10^(6) protoplasts per gram(fresh weight) and 95% viability. We incubated 100 μL protoplasts(2.5 × 10^(5)·m L^(-1)) with 15 μg plasmid in the solution of 0.4 mol·L^(-1) mannitol and 40% PEG 4000 for 15 min, ultimately achieving an optimal transient transfection efficiency of 71.47%.Conclusions This transient system demonstrated effective utility in cellular biology research through successful applications in subcellular localization analyses, bimolecular fluorescence complementation(Bi FC) verification, and prime editing vector validation. Through systematic optimization, we established an efficient and expedited protoplast-based transient transformation system and successfully applied this platform to cotton functional genomics studies.展开更多
In this study,the potential application of shaped charge jets as transient antennas for electromagnetic signal transmission was explored and an electromagnetic pulse radiation system with a shaped charge jet as a tran...In this study,the potential application of shaped charge jets as transient antennas for electromagnetic signal transmission was explored and an electromagnetic pulse radiation system with a shaped charge jet as a transient antenna was proposed.During the research,crucial characteristics of the transient antenna formed by a shaped charge with a 30 mm diameter,such as resonant frequency,radiation pattern,and radiation efficiency,were evaluated.The typical shaped charge jet morphology was obtained based on the simulations,in which it could insight the dynamic behavior of the shaped charge jet selected.An equivalent model experiment was employed to test the radiation efficiency,and it showed that a shorting pin loading method could increase the relative bandwidth of the jet antenna to 32.8%,and the experimental results correlate with the theoretical predictions for half-wave dipole antennas reasonably well.Additionally,variations in the diameter of the shaped charge jet were found to affect the input impedance and impedance bandwidth,while the length of the jet influenced the resonant frequency of the antenna.This suggests that altering these parameters can achieve reconfigurability of the jet antenna.展开更多
Transient electronics is a versatile tool that finds applications in various fields,including medical biology,environmental protection,and data information security.In the context of data protection,the traditional pa...Transient electronics is a versatile tool that finds applications in various fields,including medical biology,environmental protection,and data information security.In the context of data protection,the traditional passive degradation transient mode is being replaced by the active destruction mode,which features a short self-destruction time and provides greater resistance to recovery.This article presents an overview of recent progress in transient electronics,assessing the benefits and suitability of varying transient mechanisms.The article also analyses the influence of transient electronics on military security while emphasizing the advantages of implementing energetic materials.Besides,the article introduces energetic transient devices and evaluates their ability to support the autonomous operation of transient electronic devices.展开更多
In this paper,the isogeometric analysis(IGA)method is employed to analyze the oscillation characteristics of functionally graded triply periodic minimal surface(FG-TPMS)curved-doubly shells integrated with magneto-ele...In this paper,the isogeometric analysis(IGA)method is employed to analyze the oscillation characteristics of functionally graded triply periodic minimal surface(FG-TPMS)curved-doubly shells integrated with magneto-electric surface layers(referred to as"FG-TPMS-MEE curved-doubly shells")subjected to low-velocity impact loads.This study presents low-velocity impact load model based on a single springmass(S-M)approach.The FG-TPMS-MEE curved-doubly shells are covered with two magneto-electric surface layers,while the core layer consists of three types:I-graph and Wrapped Package-graph(IWP),Gyroid(G),and Primitive(P),with various graded functions.These types are notable for their exceptional stiffness-to-weight ratios,enabling a wide range of potential applications.The Maxwell equations and electromagnetic boundary conditions are applied to compute the change in electric potentials and magnetic potentials.The equilibrium equations of the shell are derived from a refined higher-order shear deformation theory(HSDT),and the transient responses of the FG-TPMS-MEE curveddoubly shells are subsequently determined using Newmark's direct integration method.These results have applications in structural vibration control and the analysis of structures subjected to impact or explosive loads.Furthermore,this study provides a theoretical prediction of the low-velocity impact load and magneto-electric-elastic effects on the free vibration and transient response of FG-TPMS-MEE curved-doubly shells.展开更多
Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor(GECAM)is a constellation with four instruments(launch date):GECAM-A/B(10 December 2020),GECAM-C(27 July 2022)and GECAM-D(13 March 2024),which ...Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor(GECAM)is a constellation with four instruments(launch date):GECAM-A/B(10 December 2020),GECAM-C(27 July 2022)and GECAM-D(13 March 2024),which are dedicated to monitoring gamma-ray transients in all-sky.The primary science objectives of GECAM include Gamma-Ray Bursts(GRBs),Soft Gamma-ray Repeaters(SGRs),high energy counterparts of Gravitation Wave(GW)and Fast Radio Burst(FRB),Solar Flares(SFLs),as well as Terrestrial Gamma-ray Flashes(TGFs)and Terrestrial Electron Beams(TEBs).A series of observations and research have been made since the launch of GECAM-A/B.GECAM observations provide new insights into these highenergy transients,demonstrating the unique role of GECAM in the“multi-wavelength,multi-messenger”era.展开更多
The sandwich panel incorporated a honeycomb core,a widely utilized composite structure recognized as a fundamental classification of composite materials.Comprised a core resembling a honeycomb,possessing thickness and...The sandwich panel incorporated a honeycomb core,a widely utilized composite structure recognized as a fundamental classification of composite materials.Comprised a core resembling a honeycomb,possessing thickness and softness,and is flank by rigid face sheets that sandwich various shapes and materials.This paper presents an examination of the static and dynamic analysis of lightweight plates made of aluminum honeycomb sandwich composites.Honeycomb sandwich plate samples are 300 mm long,and 300 mm wide,the heights of the core have been varied at four values ranging from 10 to 25 mm.The honeycomb core is manufactured from Aluminum material by using a novel technique namely resistance spot welding(RSW)instead of using adhesive material,which is often used when an industrial flaw is detected.Numerical optimization based on response surface methodology(RSM)and design of experiment software(DOE)was used to verify the current work.A theoretical examination of the crashworthiness behavior(maximum bending load,maximum deflection)and vibration attributes(natural frequency,damping ratio,transient temporal response)of honeycomb sandwich panels with different design parameters was also carried out.In addition,the finite element method-based ANSYS software was used to confirm the theoretical conclusions.The findings of the present work showed that the relationship between the natural frequency,core height,and cell size is direct.In contrast,the relationship between the natural frequency and the thickness of the cell wall is inverse.Conversely,the damping ratio is inversely proportional to the core height and cell size but directly proportional to the thickness of the cell wall.The study indicates that altering the core height within 10-25 mm leads to a significant increase of 82%in the natural frequency and a notable decrease of 49%in the damping ratio.These findings are based on a specific cell size value of 0.01 m and a cell wall thickness of 0.001 m.Also,the results indicate that for a given set of cell wall thickness and size values,an increase in core height from(0.01-0.025)m,leads to a reduction of the percentage of maximum response approX imately 76%.Conversely,the increasing thickness of the wall of cell wall,ranging 0.3-0.7 mm with a constant core height equal to 0.015 m,resulted in a de crease of maximum transient response by 7.8%.展开更多
This article investigates a multi-circular path-following formation control with reinforced transient profiles for nonholonomic vehicles connected by a digraph.A multi-circular formation controller endowed with the fe...This article investigates a multi-circular path-following formation control with reinforced transient profiles for nonholonomic vehicles connected by a digraph.A multi-circular formation controller endowed with the feature of spatial-temporal decoupling is devised for a group of vehicles guided by a virtual leader evolving along an implicit path,which allows for a circumnavigation on multiple circles with an anticipant angular spacing.In addition,notice that it typically imposes a stringent time constraint on time-sensitive enclosing scenarios,hence an improved prescribed performance control(IPPC)using novel tighter behavior boundaries is presented to enhance transient capabilities with an ensured appointed-time convergence free from any overshoots.The significant merits are that coordinated circumnavigation along different circles can be realized via executing geometric and dynamic assignments independently with modified transient profiles.Furthermore,all variables existing in the entire system are analyzed to be convergent.Simulation and experimental results are provided to validate the utility of suggested solution.展开更多
One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm ...One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm for bonding time of 20,40,60,and 90 min.The bonding temperature of 860℃ was considered,which is under the β transus temperature of Cp-Ti.During TLP bonding,various intermetallic compounds(IMCs),including Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe),Ti_(2)(Cu,Ag),and Ti_(2)Cu from 304L toward Cp-Ti formed in the joint.Also,on the one side,with the increase in time,further diffusion of elements decreases the blocky IMCs such as Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe)in the 304L diffusion-affected zone(DAZ)and reaction zone,and on the other side,Ti_(2)(Cu,Ag)IMC transformed into fine morphology toward Cp-Ti DAZ.The microhardness test also demonstrated that the(Cr,Fe)_(2)Ti+Ti_(5)Cr_(7)Fe_(17) IMCs in the DAZ on the side of 304L have a hardness value of HV 564,making it the hardest phase.The maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa,respectively.The cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.展开更多
对大规模交直流网络下的高压直流控制保护系统进行参数优化设计,是保证灵活交流输电系统暂态性和稳定性良好的重要手段。目前由于实时仿真技术的网络节点受限、费用高等缺点,使其不适合此规模网络的试验和设计任务。文中基于ABB公司高...对大规模交直流网络下的高压直流控制保护系统进行参数优化设计,是保证灵活交流输电系统暂态性和稳定性良好的重要手段。目前由于实时仿真技术的网络节点受限、费用高等缺点,使其不适合此规模网络的试验和设计任务。文中基于ABB公司高压直流控制保护系统硬件结构特点和MACH2(modular advanced control for HVDC and SVC)系统运作机理,提出了等价实时离线仿真的实现原理和方法,使离线仿真达到实时仿真的效果;通过与实际工控机运行结果进行比对,验证了其有效性;同时对工程用高压直流控制中的电流控制功能进行了等价实时仿真。仿真结果分析表明,基于所提出的等价实时仿真原理和方法,利用商业通用的离线仿真软件,可高效地进行高压直流控制保护系统优化设计。展开更多
The electrodeposition of nickel-silicon carbide coatings on a copper electrode was done by mixing SiC particles in the nickel electrodeposition solution.The influence of surfactants and silicon carbide particle size o...The electrodeposition of nickel-silicon carbide coatings on a copper electrode was done by mixing SiC particles in the nickel electrodeposition solution.The influence of surfactants and silicon carbide particle size on uniformity and quantity of silicon carbide particles in nickel-silicon carbide composite coatings was investigated.It was found that particle size affects the nucleation overpotential,with 40 nm silicon carbide nanoparticles more effective in promoting nickel nucleation than 500 nm particles due to an increase in active nucleation sites.In terms of surfactants,anionic surfactant sodium dodecyl sulfate(SDS)produced better dispersion of 40 nm silicon carbide particles than cationic surfactant cetyltrimethyl ammonium bromide(CTAB),but little difference was found between the two when 500 nm silicon carbide particles were used.Thus,although the suspension of silicon carbide particles can be improved and their co-deposition can be promoted with a cationic surfactant CTAB,it is less effective than an anionic surfactant SDS in terms of surface finish.展开更多
Time-domain astrophysics will enter a golden era towards the end of this decade with the advent of major facilities across the electromagnetic spectrum and in the multi-messenger realms of gravitational wave and neutr...Time-domain astrophysics will enter a golden era towards the end of this decade with the advent of major facilities across the electromagnetic spectrum and in the multi-messenger realms of gravitational wave and neutrino.In the soft X-ray regime,the novel micro-pore lobster-eye optics provides a promising technology to realise,for the first time,focusing X-ray optics for wide-angle monitors to achieve a good combination of sensitivity and wide field of view.In this context Einstein Probe,a soft X-ray all-sky monitor mission,was proposed and selected as a candidate mission of priority in the space science programme of the Chinese Academy of Sciences.This paper reviews the most important science developments and key questions in this field towards 2020 and beyond,and how to achieve them technologically.It also introduces the Einstein Probe mission,including its key science goals and mission definition,as well as some of the key technological issues.展开更多
We report the transient effects in Erbium Doped Fiber Amplifier(EDFA)systems for pulsed signals with different duty-cycles.The work includes the analysis using three different duty-cycles,10%,20%and 50%.A curve fittin...We report the transient effects in Erbium Doped Fiber Amplifier(EDFA)systems for pulsed signals with different duty-cycles.The work includes the analysis using three different duty-cycles,10%,20%and 50%.A curve fitting technique is also proposed to predict the transients of any lesser duty-cycled pulse,once the transients of a larger duty-cycled pulse is known.Mathematical evaluation confirms the double exponential shape of transient distorted signal.Further,EDFA transient effect is experimentally verified on a Wavelength Division Multiplexed(WDM)link by multiplexing high and low bitrate modulated optical signals.We conclude the paper by proposing a transient suppression technique for variable dutycycle signals and analyzing its effectiveness with different wavelength spacing.展开更多
Careful analysis of transients in shipboard power systems is important to achieve long life times of the components in future all-electric ships.In order to accomplish results with high accuracy,it is recommended to v...Careful analysis of transients in shipboard power systems is important to achieve long life times of the components in future all-electric ships.In order to accomplish results with high accuracy,it is recommended to validate cable models as they have significant influence on the amplitude and frequency spectrum of voltage transients.The authors propose comparison of model and measurement using scattering parameters.They can be easily obtained from measurement and simulation and deliver broadband information about the accuracy of the model.The measurement can be performed using a vector network analyzer.The process to extract scattering parameters from simulation models is explained in detail.Three different simulation models of a 5 kV XLPE power cable have been validated.The chosen approach delivers an efficient tool to quickly estimate the quality of a model.展开更多
Solar transients and their related interplanetary counterparts have severe effects on the space environments of the Earth. Therefore, the research of solar corona and interplanetary physics has become the focus of stu...Solar transients and their related interplanetary counterparts have severe effects on the space environments of the Earth. Therefore, the research of solar corona and interplanetary physics has become the focus of study for both solar and space scientists. Considerable progress has been achieved in these aspects by the solar and space physics community of China during 2012–2014, which will be given in this report. The brief report summarizes the research advances of solar corona and interplanetary physics into the following parts: solar wind origin and turbulence, coronal waves and seismology, solar eruptions, solar energetic particle and galactic cosmic ray, magnetic reconnection,Magnetohydrodynamic(MHD) models and their applications, waves and structures in solar wind,propagation of ICMEs/shocks and their arrival time predictions. These research achievements have been achieved by Chinese solar and space scientists independently or via international collaborations.展开更多
Significant progress has been made by Chinese scientists in research of interplanetary physics during the recent two years(2018–2020).These achievements are reflected at least in the following aspects:Activities in s...Significant progress has been made by Chinese scientists in research of interplanetary physics during the recent two years(2018–2020).These achievements are reflected at least in the following aspects:Activities in solar corona and lower solar atmosphere;solar wind and turbulence;filament/prominence,jets,flares,and radio bursts;active regions and solar eruptions;coronal mass ejections and their interplanetary counterparts;other interplanetary structures;space weather prediction methods;magnetic reconnection;Magnetohydrodynamic(MHD)numerical modeling;solar energetic particles,cosmic rays,and Forbush decreases;machine learning methods in space weather and other aspects.More than one hundred and forty papers in the academic journals have been published in these research directions.These fruitful achievements are obtained by Chinese scholars in solar physics and space physics either independently or through international collaborations.They greatly improve people’s understanding of solar activities,solar eruptions,the corresponding space weather effects,and the Sun-Earth relations.Here we will give a very brief review on the research progress.However,it must be pointed out that this paper may not completely cover all achievements in this field due to our limited knowledge.展开更多
基金Project (2016YFB1200602-11) supported by National Key R&D Plan of China
文摘The influence of enlarged section parameters on pressure transients of high-speed train passing through a tunnel was investigated by numerical simulation.The calculation results obtained by the structured and unstructured grid and the experimental results of smooth wall tunnel were verified.Numerical simulation studies were conducted on three tunnel enlarged section parameters,the enlarged section distribution along circumferential direction,the enlarged section area and the enlarged section distribution along tunnel length direction.The calculation results show that the influence of the different enlarged section distributions along tunnel circumferential direction on pressure transients in the tunnel is basically consistent.There is an optimal enlarged section area for the minimum value of the pressure variation amplitude and the average pressure variation in the tunnel.The law of the pressure variation amplitude and the average pressure variation of the enlarged section distribution along tunnel length direction are obtained.
文摘The microstructure and electrical properties of ZnO-Bi2O3-Yb2O3 based varistor ceramics were investigated with various temperature effects from 900°C to 1050°C.From the results,it was observed that the increase of sintering temperature offers a reduced capacitive effect from 0.460 nF to 0.321 nF.Furthermore,the grain sizes of varistors were varied from 6.8μm to 9.8μm.The consequence of such smaller grain sizes provided a better voltage gradient of about 895 V/mm for the disc sintered at 900°C and fallen drastically to 410 V/mm for the sample sintered at 1050°C.In addition,there was an increase of non-linearity index to a maximum value of 36.0 and reduced leakage current of 0.026 mA/cm2.However,the density of the varistor decreased with an increase of temperature from 5.41 g/cm3 to 5.24 g/cm3.With this base,the influence of varistor capacitance and high voltage gradient were scrutinized and it led an improved transition speed of the varistor assembly from non-conduction to conduction mode during intruding nanosecond transients.
基金supported by Biological Breeding of Early Maturing and Disease Resistant Cotton Varieties (NO.2023ZD04041)the Project of China Agriculture Research System (Grant No. CARS-15-06)+2 种基金Natural Science Foundation of Henan Province (Grant No. 232300421041 and 222300420382)National Natural Science Foundation of China (Grant No. U21 A20213)the Central Public-interest Scientific Institution Basal Research Fund (Grant No. 1610162023017 and 1610162023028)。
文摘Background Cotton is an important crop providing the most natural fibers all over the world. The cotton genomics community has utilized whole genome sequencing data to construct an elite gene pool in which functional genes are related to agronomic traits. However, the functional validation of these genes is hindered by time-consuming and inefficient genetic transformation methods. Thus, establishing a transient transformation system of high efficiency is necessary for cotton genomics.Results To improve the efficiency of transient transformation, we used the protoplasts isolated from the etiolated cotyledon as recipient. The enzymatic digestion buffer comprised 1.5%(w/v) cellulase, 0.75%(w/v) macerozyme, and 1% hemicellulase, osmotically buffered with 0.4 mol·L^(-1) mannitol. After 5 h of dark incubation at 25℃, uniform cotton protoplasts were successfully isolated with a yield of 4.6 × 10^(6) protoplasts per gram(fresh weight) and 95% viability. We incubated 100 μL protoplasts(2.5 × 10^(5)·m L^(-1)) with 15 μg plasmid in the solution of 0.4 mol·L^(-1) mannitol and 40% PEG 4000 for 15 min, ultimately achieving an optimal transient transfection efficiency of 71.47%.Conclusions This transient system demonstrated effective utility in cellular biology research through successful applications in subcellular localization analyses, bimolecular fluorescence complementation(Bi FC) verification, and prime editing vector validation. Through systematic optimization, we established an efficient and expedited protoplast-based transient transformation system and successfully applied this platform to cotton functional genomics studies.
基金supported by the"Fundamental Research Funds for the Central Universities"(Grant No.30924010801).
文摘In this study,the potential application of shaped charge jets as transient antennas for electromagnetic signal transmission was explored and an electromagnetic pulse radiation system with a shaped charge jet as a transient antenna was proposed.During the research,crucial characteristics of the transient antenna formed by a shaped charge with a 30 mm diameter,such as resonant frequency,radiation pattern,and radiation efficiency,were evaluated.The typical shaped charge jet morphology was obtained based on the simulations,in which it could insight the dynamic behavior of the shaped charge jet selected.An equivalent model experiment was employed to test the radiation efficiency,and it showed that a shorting pin loading method could increase the relative bandwidth of the jet antenna to 32.8%,and the experimental results correlate with the theoretical predictions for half-wave dipole antennas reasonably well.Additionally,variations in the diameter of the shaped charge jet were found to affect the input impedance and impedance bandwidth,while the length of the jet influenced the resonant frequency of the antenna.This suggests that altering these parameters can achieve reconfigurability of the jet antenna.
基金supported by the National Natural Science Foun-dation of China(Grant No.52206165)Key R&D Projects in Sichuan Province(Grant No.2022YFG0219)。
文摘Transient electronics is a versatile tool that finds applications in various fields,including medical biology,environmental protection,and data information security.In the context of data protection,the traditional passive degradation transient mode is being replaced by the active destruction mode,which features a short self-destruction time and provides greater resistance to recovery.This article presents an overview of recent progress in transient electronics,assessing the benefits and suitability of varying transient mechanisms.The article also analyses the influence of transient electronics on military security while emphasizing the advantages of implementing energetic materials.Besides,the article introduces energetic transient devices and evaluates their ability to support the autonomous operation of transient electronic devices.
文摘In this paper,the isogeometric analysis(IGA)method is employed to analyze the oscillation characteristics of functionally graded triply periodic minimal surface(FG-TPMS)curved-doubly shells integrated with magneto-electric surface layers(referred to as"FG-TPMS-MEE curved-doubly shells")subjected to low-velocity impact loads.This study presents low-velocity impact load model based on a single springmass(S-M)approach.The FG-TPMS-MEE curved-doubly shells are covered with two magneto-electric surface layers,while the core layer consists of three types:I-graph and Wrapped Package-graph(IWP),Gyroid(G),and Primitive(P),with various graded functions.These types are notable for their exceptional stiffness-to-weight ratios,enabling a wide range of potential applications.The Maxwell equations and electromagnetic boundary conditions are applied to compute the change in electric potentials and magnetic potentials.The equilibrium equations of the shell are derived from a refined higher-order shear deformation theory(HSDT),and the transient responses of the FG-TPMS-MEE curveddoubly shells are subsequently determined using Newmark's direct integration method.These results have applications in structural vibration control and the analysis of structures subjected to impact or explosive loads.Furthermore,this study provides a theoretical prediction of the low-velocity impact load and magneto-electric-elastic effects on the free vibration and transient response of FG-TPMS-MEE curved-doubly shells.
文摘Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor(GECAM)is a constellation with four instruments(launch date):GECAM-A/B(10 December 2020),GECAM-C(27 July 2022)and GECAM-D(13 March 2024),which are dedicated to monitoring gamma-ray transients in all-sky.The primary science objectives of GECAM include Gamma-Ray Bursts(GRBs),Soft Gamma-ray Repeaters(SGRs),high energy counterparts of Gravitation Wave(GW)and Fast Radio Burst(FRB),Solar Flares(SFLs),as well as Terrestrial Gamma-ray Flashes(TGFs)and Terrestrial Electron Beams(TEBs).A series of observations and research have been made since the launch of GECAM-A/B.GECAM observations provide new insights into these highenergy transients,demonstrating the unique role of GECAM in the“multi-wavelength,multi-messenger”era.
文摘The sandwich panel incorporated a honeycomb core,a widely utilized composite structure recognized as a fundamental classification of composite materials.Comprised a core resembling a honeycomb,possessing thickness and softness,and is flank by rigid face sheets that sandwich various shapes and materials.This paper presents an examination of the static and dynamic analysis of lightweight plates made of aluminum honeycomb sandwich composites.Honeycomb sandwich plate samples are 300 mm long,and 300 mm wide,the heights of the core have been varied at four values ranging from 10 to 25 mm.The honeycomb core is manufactured from Aluminum material by using a novel technique namely resistance spot welding(RSW)instead of using adhesive material,which is often used when an industrial flaw is detected.Numerical optimization based on response surface methodology(RSM)and design of experiment software(DOE)was used to verify the current work.A theoretical examination of the crashworthiness behavior(maximum bending load,maximum deflection)and vibration attributes(natural frequency,damping ratio,transient temporal response)of honeycomb sandwich panels with different design parameters was also carried out.In addition,the finite element method-based ANSYS software was used to confirm the theoretical conclusions.The findings of the present work showed that the relationship between the natural frequency,core height,and cell size is direct.In contrast,the relationship between the natural frequency and the thickness of the cell wall is inverse.Conversely,the damping ratio is inversely proportional to the core height and cell size but directly proportional to the thickness of the cell wall.The study indicates that altering the core height within 10-25 mm leads to a significant increase of 82%in the natural frequency and a notable decrease of 49%in the damping ratio.These findings are based on a specific cell size value of 0.01 m and a cell wall thickness of 0.001 m.Also,the results indicate that for a given set of cell wall thickness and size values,an increase in core height from(0.01-0.025)m,leads to a reduction of the percentage of maximum response approX imately 76%.Conversely,the increasing thickness of the wall of cell wall,ranging 0.3-0.7 mm with a constant core height equal to 0.015 m,resulted in a de crease of maximum transient response by 7.8%.
基金supported in part by the National Natural Science Foundation of China under Grant Nos.62173312 and 61803348in part by the National Major Scientific Instruments Development Project under Grant No.61927807+3 种基金in part by the Program for the Innovative Talents of Higher Education Institutions of ShanxiShanxi Province Science Foundation for Excellent Youthsin part by the Shanxi"1331 Project"Key Subjects Construction(1331KSC)in part by Graduate Innovation Project of Shanxi Province under Grant No.2021Y617。
文摘This article investigates a multi-circular path-following formation control with reinforced transient profiles for nonholonomic vehicles connected by a digraph.A multi-circular formation controller endowed with the feature of spatial-temporal decoupling is devised for a group of vehicles guided by a virtual leader evolving along an implicit path,which allows for a circumnavigation on multiple circles with an anticipant angular spacing.In addition,notice that it typically imposes a stringent time constraint on time-sensitive enclosing scenarios,hence an improved prescribed performance control(IPPC)using novel tighter behavior boundaries is presented to enhance transient capabilities with an ensured appointed-time convergence free from any overshoots.The significant merits are that coordinated circumnavigation along different circles can be realized via executing geometric and dynamic assignments independently with modified transient profiles.Furthermore,all variables existing in the entire system are analyzed to be convergent.Simulation and experimental results are provided to validate the utility of suggested solution.
文摘One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm for bonding time of 20,40,60,and 90 min.The bonding temperature of 860℃ was considered,which is under the β transus temperature of Cp-Ti.During TLP bonding,various intermetallic compounds(IMCs),including Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe),Ti_(2)(Cu,Ag),and Ti_(2)Cu from 304L toward Cp-Ti formed in the joint.Also,on the one side,with the increase in time,further diffusion of elements decreases the blocky IMCs such as Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe)in the 304L diffusion-affected zone(DAZ)and reaction zone,and on the other side,Ti_(2)(Cu,Ag)IMC transformed into fine morphology toward Cp-Ti DAZ.The microhardness test also demonstrated that the(Cr,Fe)_(2)Ti+Ti_(5)Cr_(7)Fe_(17) IMCs in the DAZ on the side of 304L have a hardness value of HV 564,making it the hardest phase.The maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa,respectively.The cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.
文摘对大规模交直流网络下的高压直流控制保护系统进行参数优化设计,是保证灵活交流输电系统暂态性和稳定性良好的重要手段。目前由于实时仿真技术的网络节点受限、费用高等缺点,使其不适合此规模网络的试验和设计任务。文中基于ABB公司高压直流控制保护系统硬件结构特点和MACH2(modular advanced control for HVDC and SVC)系统运作机理,提出了等价实时离线仿真的实现原理和方法,使离线仿真达到实时仿真的效果;通过与实际工控机运行结果进行比对,验证了其有效性;同时对工程用高压直流控制中的电流控制功能进行了等价实时仿真。仿真结果分析表明,基于所提出的等价实时仿真原理和方法,利用商业通用的离线仿真软件,可高效地进行高压直流控制保护系统优化设计。
基金Project(20180550242)supported by the Liaoning Science and Technology Plan,China。
文摘The electrodeposition of nickel-silicon carbide coatings on a copper electrode was done by mixing SiC particles in the nickel electrodeposition solution.The influence of surfactants and silicon carbide particle size on uniformity and quantity of silicon carbide particles in nickel-silicon carbide composite coatings was investigated.It was found that particle size affects the nucleation overpotential,with 40 nm silicon carbide nanoparticles more effective in promoting nickel nucleation than 500 nm particles due to an increase in active nucleation sites.In terms of surfactants,anionic surfactant sodium dodecyl sulfate(SDS)produced better dispersion of 40 nm silicon carbide particles than cationic surfactant cetyltrimethyl ammonium bromide(CTAB),but little difference was found between the two when 500 nm silicon carbide particles were used.Thus,although the suspension of silicon carbide particles can be improved and their co-deposition can be promoted with a cationic surfactant CTAB,it is less effective than an anionic surfactant SDS in terms of surface finish.
基金Supported by the Strategic Priority Research Programme on Space Science of the Chinese Academy of Sciences(XDA04061100)
文摘Time-domain astrophysics will enter a golden era towards the end of this decade with the advent of major facilities across the electromagnetic spectrum and in the multi-messenger realms of gravitational wave and neutrino.In the soft X-ray regime,the novel micro-pore lobster-eye optics provides a promising technology to realise,for the first time,focusing X-ray optics for wide-angle monitors to achieve a good combination of sensitivity and wide field of view.In this context Einstein Probe,a soft X-ray all-sky monitor mission,was proposed and selected as a candidate mission of priority in the space science programme of the Chinese Academy of Sciences.This paper reviews the most important science developments and key questions in this field towards 2020 and beyond,and how to achieve them technologically.It also introduces the Einstein Probe mission,including its key science goals and mission definition,as well as some of the key technological issues.
文摘We report the transient effects in Erbium Doped Fiber Amplifier(EDFA)systems for pulsed signals with different duty-cycles.The work includes the analysis using three different duty-cycles,10%,20%and 50%.A curve fitting technique is also proposed to predict the transients of any lesser duty-cycled pulse,once the transients of a larger duty-cycled pulse is known.Mathematical evaluation confirms the double exponential shape of transient distorted signal.Further,EDFA transient effect is experimentally verified on a Wavelength Division Multiplexed(WDM)link by multiplexing high and low bitrate modulated optical signals.We conclude the paper by proposing a transient suppression technique for variable dutycycle signals and analyzing its effectiveness with different wavelength spacing.
基金Supported by the US Office of Naval Research Under Grant(N00014-04-1-0664)NSF Cooperative Agreement and the State of Florida(DMR-0084173)
文摘Careful analysis of transients in shipboard power systems is important to achieve long life times of the components in future all-electric ships.In order to accomplish results with high accuracy,it is recommended to validate cable models as they have significant influence on the amplitude and frequency spectrum of voltage transients.The authors propose comparison of model and measurement using scattering parameters.They can be easily obtained from measurement and simulation and deliver broadband information about the accuracy of the model.The measurement can be performed using a vector network analyzer.The process to extract scattering parameters from simulation models is explained in detail.Three different simulation models of a 5 kV XLPE power cable have been validated.The chosen approach delivers an efficient tool to quickly estimate the quality of a model.
文摘Solar transients and their related interplanetary counterparts have severe effects on the space environments of the Earth. Therefore, the research of solar corona and interplanetary physics has become the focus of study for both solar and space scientists. Considerable progress has been achieved in these aspects by the solar and space physics community of China during 2012–2014, which will be given in this report. The brief report summarizes the research advances of solar corona and interplanetary physics into the following parts: solar wind origin and turbulence, coronal waves and seismology, solar eruptions, solar energetic particle and galactic cosmic ray, magnetic reconnection,Magnetohydrodynamic(MHD) models and their applications, waves and structures in solar wind,propagation of ICMEs/shocks and their arrival time predictions. These research achievements have been achieved by Chinese solar and space scientists independently or via international collaborations.
基金Supported by the B-type Strategic Priority Research Program of Chinese Academy of Sciences(XDB41000000)the National Natural Science Foundation of China(41531073,41731067,41861164026,41874202,41474153)+1 种基金the Youth Innovation Promotion Association of Chinese Academy of Sciences(2016133)Chinese Academy of Sciences Research Fund for Key Development Directions。
文摘Significant progress has been made by Chinese scientists in research of interplanetary physics during the recent two years(2018–2020).These achievements are reflected at least in the following aspects:Activities in solar corona and lower solar atmosphere;solar wind and turbulence;filament/prominence,jets,flares,and radio bursts;active regions and solar eruptions;coronal mass ejections and their interplanetary counterparts;other interplanetary structures;space weather prediction methods;magnetic reconnection;Magnetohydrodynamic(MHD)numerical modeling;solar energetic particles,cosmic rays,and Forbush decreases;machine learning methods in space weather and other aspects.More than one hundred and forty papers in the academic journals have been published in these research directions.These fruitful achievements are obtained by Chinese scholars in solar physics and space physics either independently or through international collaborations.They greatly improve people’s understanding of solar activities,solar eruptions,the corresponding space weather effects,and the Sun-Earth relations.Here we will give a very brief review on the research progress.However,it must be pointed out that this paper may not completely cover all achievements in this field due to our limited knowledge.
