Buried water-conducting and water-bearing structures in front of the driving head may easily lead to water bursts in coal mines. Therefore,it is very important for the safety of production to make an accurate and time...Buried water-conducting and water-bearing structures in front of the driving head may easily lead to water bursts in coal mines. Therefore,it is very important for the safety of production to make an accurate and timely forecast about water bursts. Based on the smoke ring effect of transient electromagnetic fields,the principle of transient electro-magnetic method used in detecting buried water-bearing structures in coal mines in advance,is discussed. Small multi-turn loop configurations used in coal mines are proposed and a field procedure of semicircular sector scanning is presented. The application of this method in one coal mine indicates that the technology has many advantages compared with others. The method is inexpensive,highly accurate and efficient. Suggestions are presented for future solutions to some remaining problems.展开更多
Tunneling machines, or excavators, are large and good conductors and affect the reliability of data gathering and interpretation in advanced detection using transient electromagnetic methods. In our experiment, we use...Tunneling machines, or excavators, are large and good conductors and affect the reliability of data gathering and interpretation in advanced detection using transient electromagnetic methods. In our experiment, we used a coincident-loop and central loop type of configuration, where the coil plane l） vertical to and 2） parallel to the working face. A SIROTEM instrument at different locations was used to observe the transient electromagnetic responses of the excavator and to analyze the response amplitudes. The result shows that the tunneling machine affects the advanced detection data and is related to the way the coil is coupled. When the excavator is 6 m from the observatory, the interference of tunneling machine can be ignored.展开更多
This study used the stable and convergent Dufort-Frankel method to differentially discretize the diffusion equation of the ground-well transient electromagnetic secondary field.The absorption boundary condition of com...This study used the stable and convergent Dufort-Frankel method to differentially discretize the diffusion equation of the ground-well transient electromagnetic secondary field.The absorption boundary condition of complex frequency-shifted perfectly matched layer(CFS-PML)was used for truncation so that the low-frequency electromagnetic wave can be better absorbed at the model boundary.A typical three-dimensional(3D)homogeneous half-space model was established and a low-resistivity cube model was analyzed under the half-space condition.The response patterns and drivers of the low-resistivity cube model were discussed under the influence of a low-resistivity overburden.The absorption boundary conditions of CFS-PML significantly affected the low-frequency electromagnetic waves.For a low-resistivity cube around the borehole,its response curve exhibited a single-peak,and the extreme point of the curve corresponded to the center of the low-resistivity body.When the low-resistivity cube was directly below the borehole,the response curve showed three extreme values(two high and one low),with the low corresponding to the center of the low-resistivity body.The total field response of the low-resistivity overburden was stronger than that of the uniform half-space model due to the low-resistivity shielding effect of electromagnetic waves.When the receiving-transmitting distance gradually increased,the effect of the low-resistivity overburden was gradually weakened,and the response of the low-resistivity cube was strengthened.It was affected by the ratio of the overburden resistivity to the resistivity of the low-resistivity body.展开更多
For some time, whole space feature as a theoretical problem has been a puzzle in mining transient electromagnetic method （TEM）. We have introduced a detailed method of calculating the transient response of a vertica...For some time, whole space feature as a theoretical problem has been a puzzle in mining transient electromagnetic method （TEM）. We have introduced a detailed method of calculating the transient response of a vertical magnetic bipolar source in a whole space plane layered medium in order to obtain whole space features. After designing a whole space plane layered medium model, equations were established based on boundary conditions in terms of electromagnetic vector potential. Expressions of electromagnetic fields were obtained by solving these equations. The expressions were computed by the Hankel transform after dispersion. The results in a frequency domain were changed into a time domain by using a multinomial cosine transform method. The expressions were correctly validated by comparing them with the analytical solution in half space. The half space and whole space results show that the whole space features are dear, suggesting that the theory of half space is not suitable for the whole space. Our algorithm supplied the technical instrument for studying the distributed features of whole space transient electromagnetic fields.展开更多
A convenient numerical calculation method (inverse spline interpolation) for all-time apparent resistivity intransient electromagnetic method (TEM) is proposed in this paper. Characteristic of early and late normalize...A convenient numerical calculation method (inverse spline interpolation) for all-time apparent resistivity intransient electromagnetic method (TEM) is proposed in this paper. Characteristic of early and late normalized inductiveelectromotive force was investigated. According to the turning point, the transient process is divided into the earlyphase, the turning point, and the late phase. Afterwards, apparent resistivity is obtained through inverse spline interpo-lation in the early and the late phases, respectively. Finally, the resistivities of the early-time and the late-time wereconnected together by the turning point. The result shows that the inverse spline method is feasible and the method alsolays a foundation for initial model construction in the TEM automatic inversion.展开更多
基金Project 40674074 supported by the National Natural Science Foundation of China20050290501 by the Specialized Research Fund for the Doctoral Programof Higher EducationD200409 by the Scientific Research Fund for Youth of China University of Mining & Technology
文摘Buried water-conducting and water-bearing structures in front of the driving head may easily lead to water bursts in coal mines. Therefore,it is very important for the safety of production to make an accurate and timely forecast about water bursts. Based on the smoke ring effect of transient electromagnetic fields,the principle of transient electro-magnetic method used in detecting buried water-bearing structures in coal mines in advance,is discussed. Small multi-turn loop configurations used in coal mines are proposed and a field procedure of semicircular sector scanning is presented. The application of this method in one coal mine indicates that the technology has many advantages compared with others. The method is inexpensive,highly accurate and efficient. Suggestions are presented for future solutions to some remaining problems.
基金support received from the National Basic Research Program of China (No2007CB209400)the National Natural Science Foundation of China (No50774085)the Young Scientists Fund of the School Science Foundation of CUMT (No2008A046)
文摘Tunneling machines, or excavators, are large and good conductors and affect the reliability of data gathering and interpretation in advanced detection using transient electromagnetic methods. In our experiment, we used a coincident-loop and central loop type of configuration, where the coil plane l） vertical to and 2） parallel to the working face. A SIROTEM instrument at different locations was used to observe the transient electromagnetic responses of the excavator and to analyze the response amplitudes. The result shows that the tunneling machine affects the advanced detection data and is related to the way the coil is coupled. When the excavator is 6 m from the observatory, the interference of tunneling machine can be ignored.
基金This work was supported by China Postdoctoral Science Foundation(No.2022M723391)the Science and Technology Innovation Project of Higher Education in Shanxi Province(No.2019L0754)+1 种基金the Central Guiding Local Science and Technology Development Fund Project(No.YDZJSX2021B021)Shanxi Province Basic Research Plan General Project(No.202203021221294).
文摘This study used the stable and convergent Dufort-Frankel method to differentially discretize the diffusion equation of the ground-well transient electromagnetic secondary field.The absorption boundary condition of complex frequency-shifted perfectly matched layer(CFS-PML)was used for truncation so that the low-frequency electromagnetic wave can be better absorbed at the model boundary.A typical three-dimensional(3D)homogeneous half-space model was established and a low-resistivity cube model was analyzed under the half-space condition.The response patterns and drivers of the low-resistivity cube model were discussed under the influence of a low-resistivity overburden.The absorption boundary conditions of CFS-PML significantly affected the low-frequency electromagnetic waves.For a low-resistivity cube around the borehole,its response curve exhibited a single-peak,and the extreme point of the curve corresponded to the center of the low-resistivity body.When the low-resistivity cube was directly below the borehole,the response curve showed three extreme values(two high and one low),with the low corresponding to the center of the low-resistivity body.The total field response of the low-resistivity overburden was stronger than that of the uniform half-space model due to the low-resistivity shielding effect of electromagnetic waves.When the receiving-transmitting distance gradually increased,the effect of the low-resistivity overburden was gradually weakened,and the response of the low-resistivity cube was strengthened.It was affected by the ratio of the overburden resistivity to the resistivity of the low-resistivity body.
基金Project 40674074 supported by the National Natural Science Foundation of China
文摘For some time, whole space feature as a theoretical problem has been a puzzle in mining transient electromagnetic method （TEM）. We have introduced a detailed method of calculating the transient response of a vertical magnetic bipolar source in a whole space plane layered medium in order to obtain whole space features. After designing a whole space plane layered medium model, equations were established based on boundary conditions in terms of electromagnetic vector potential. Expressions of electromagnetic fields were obtained by solving these equations. The expressions were computed by the Hankel transform after dispersion. The results in a frequency domain were changed into a time domain by using a multinomial cosine transform method. The expressions were correctly validated by comparing them with the analytical solution in half space. The half space and whole space results show that the whole space features are dear, suggesting that the theory of half space is not suitable for the whole space. Our algorithm supplied the technical instrument for studying the distributed features of whole space transient electromagnetic fields.
基金Project 40344022 supported by National Natural Science Foundation of China
文摘A convenient numerical calculation method (inverse spline interpolation) for all-time apparent resistivity intransient electromagnetic method (TEM) is proposed in this paper. Characteristic of early and late normalized inductiveelectromotive force was investigated. According to the turning point, the transient process is divided into the earlyphase, the turning point, and the late phase. Afterwards, apparent resistivity is obtained through inverse spline interpo-lation in the early and the late phases, respectively. Finally, the resistivities of the early-time and the late-time wereconnected together by the turning point. The result shows that the inverse spline method is feasible and the method alsolays a foundation for initial model construction in the TEM automatic inversion.
