期刊文献+
共找到14,945篇文章
< 1 2 250 >
每页显示 20 50 100
PC透明件表面Silicone/TiO_(2)一维光子晶体紫外防护膜层研究
1
作者 韩健 吕艳 +5 位作者 席圣杰 张军利 祝林 袁旗 刘春太 申长雨 《载人航天》 北大核心 2025年第2期197-201,共5页
为提升PC透明件的抗辐照性能,选用柔韧性有机硅为低折射率材料,二氧化钛(TiO_(2))为高折射率材料,结合溶胶凝胶法和旋涂法,在PC表面成功制备了表面无裂纹的一维光子晶体纳米多层膜。通过调节溶胶浓度及旋涂速度,4周期Silicone/TiO_(2)1D... 为提升PC透明件的抗辐照性能,选用柔韧性有机硅为低折射率材料,二氧化钛(TiO_(2))为高折射率材料,结合溶胶凝胶法和旋涂法,在PC表面成功制备了表面无裂纹的一维光子晶体纳米多层膜。通过调节溶胶浓度及旋涂速度,4周期Silicone/TiO_(2)1DPhC/PC在紫外波段(波长328 nm处)反射率达到86%,同时在可见光区的平均透过率达到85%以上。经胶带剥离和摩擦测试后,Silicone/TiO_(2)1DPhC/PC表现出良好的耐刮擦性及力学稳定性。人工加速紫外老化实验表明,Silicone/TiO_(2)一维光子晶体紫外反射膜层可以为PC基材提供有效的紫外辐照防护。 展开更多
关键词 聚碳酸酯 紫外防护 一维光子晶体 多层膜 有机硅
在线阅读 下载PDF
Key fungal communities related to alleviating replanting stress of Lanzhou lily under silicon fertilizer and microbial agents application
2
作者 WANG Yi-qin YU Yan-lin +5 位作者 YANG Hong-yu LI Hui HOU Lei MAN Hua-li HAN Jia SHI Gui-ying 《植物营养与肥料学报》 北大核心 2025年第2期395-406,共12页
【Objectives】Si and microbial application could relieve the crop replanting problems(CRPs).We further studied the change of key microorganisms that are related to the beneficial effects,aiming at provide reference fo... 【Objectives】Si and microbial application could relieve the crop replanting problems(CRPs).We further studied the change of key microorganisms that are related to the beneficial effects,aiming at provide reference for the manufacture and application of both microbial agents and Si fertilizer in food lily production.【Methods】A field experiment was conducted over a three-year period,from March 2019 to March 2022.The experimental field had been continuously cultivated with lily for 9 years.Three treatments were established:silicon fertilizer(SF),microbial agents(“Special 8^(TM)”,MF),and combined application of silicon fertilizer and microbial agents(SMF).A control group with blank soil(CK)was also included.At seedling stage of Lanzhou lilies in 2020 and 2021,the shoot and bulb dry weight,and the plant height and stem diameter of Lanzhou lilies were investigated for calculation of seedling index.In July 2020,20 plants were selected in each plot,and root zone soils were sampled at a depth of 20 cm,10 cm away from the roots,and then mixed to form a composite sample.The soil available Si and organic matter content were analyzed,and the fungal community structure and some specific microbial groups in soils were determined with high-throughput sequencing of ITS.【Results】All the three treatments significantly enhanced the lily plant growth and the seedling index,compared to CK.Besides,SF and MF treatments increased the relative abundances(RA)and diversity of fungal communities,and altered the community structures.The RA of some specific groups were found to be significantly correlated with the seedling index and/or soil available Si.Of them,the RA of the genera Fusarium,Dactylonectria,Humicola,Stilbella,and the species Humicola_grisea showed a positive correlation,while that of the genera Mortierella,Stilbella,Holtermanniella,and the species Mortierella_fatshederae showed a negative correlation with seedling index.The genera Fusarium,Stilbella,the species Humicola_grisea,and Dactylonectria_estremocensis showed a positive correlation,while the genura Stilbella,and the species Mortierella fatshederae showed a negative correlation with available Si content.In the co-occurence network of top twenty fungal genera and top sixteen bacterial genera(RA>0.2%),Holtermanniella was the only genus that interacted with the bacteria and negatively correlated with bacterial genus Blastococcus.Holtermanniella was also the most densely connected genera,followed by the genus Fusarium,Didymella and Humicola.In addition,the genus Holtermanniella was the key species connecting fungal and bacterial community in soil.Fungal functional prediction revealed that SF,MF and SMF treatments decreased plant pathogens guilds and increased the beneficial guilds Ectomycorrhizal,plant saprophyte,leaf saprophyte,and arbuscular mycorrhizal compared to CK.【Conclusions】Combined application of silicon fertilizer and microbial agents can alleviate continuous replanting problems of Lanzhou lilies through restoring the fungal community diversity,and promoting plant residue depredation,thus reducing soil born disease incidence.The beneficial genus Humicola and its one species H.grisea acts as bioconversion,and the genus Acremonium acts as plant pathogen inhibitor. 展开更多
关键词 Lanzhou lily soil fungi diversity pathotroph saprophyte silicon fertilization microbial agent
在线阅读 下载PDF
基于两步刻蚀工艺的锥形TSV制备方法 被引量:1
3
作者 田苗 刘民 +3 位作者 林子涵 付学成 程秀兰 吴林晟 《半导体技术》 CAS 北大核心 2024年第4期316-322,共7页
以硅通孔(TSV)为核心的2.5D/3D封装技术可以实现芯片之间的高速、低功耗和高带宽的信号传输。常见的垂直TSV的制造工艺复杂,容易造成填充缺陷。锥形TSV的侧壁倾斜,开口较大,有利于膜层沉积和铜电镀填充,可降低工艺难度和提高填充质量。... 以硅通孔(TSV)为核心的2.5D/3D封装技术可以实现芯片之间的高速、低功耗和高带宽的信号传输。常见的垂直TSV的制造工艺复杂,容易造成填充缺陷。锥形TSV的侧壁倾斜,开口较大,有利于膜层沉积和铜电镀填充,可降低工艺难度和提高填充质量。在相对易于实现的刻蚀条件下制备了锥形TSV,并通过增加第二步刻蚀来改善锥形TSV形貌。成功制备了直径为10~40μm、孔口为喇叭形的锥形TSV。通过溅射膜层和铜电镀填充,成功实现了直径为15μm、深度为60μm的锥形TSV的连续膜层沉积和完全填充,验证了两步刻蚀工艺的可行性和锥形TSV在提高膜层质量和填充效果方面的优势。为未来高密度封装领域提供了一种新的TSV制备工艺,在降低成本的同时提高了2.5D/3D封装技术的性能。 展开更多
关键词 硅通孔(tsv) 锥形 种子层 电镀填充 薄膜沉积
在线阅读 下载PDF
基于温度传感阵列的TSV内部缺陷检测技术研究
4
作者 聂磊 于晨睿 +1 位作者 张鸣 骆仁星 《电子测量技术》 北大核心 2024年第8期1-7,共7页
在TSV三维集成领域,由于TSV内部缺陷的微小化和检测的不可接触性,寻找一个无损、灵敏且高效的内部缺陷检测方法尤为重要。针对这一挑战,提出了一种基于温度传感阵列的TSV内部缺陷检测方法。内部缺陷对TSV三维封装芯片的外部温度分布产... 在TSV三维集成领域,由于TSV内部缺陷的微小化和检测的不可接触性,寻找一个无损、灵敏且高效的内部缺陷检测方法尤为重要。针对这一挑战,提出了一种基于温度传感阵列的TSV内部缺陷检测方法。内部缺陷对TSV三维封装芯片的外部温度分布产生了影响,这些温度分布呈现出有规律的变化,每一种缺陷类型都会导致外部温度分布产生不同的偏差。利用温度传感阵列测量这些分布变化对缺陷进行有效的识别与分类。根据工作状态下的芯片产生的热信号以揭示其内部的缺陷信息,设计了基于温度传感阵列的检测系统。通过理论分析与仿真模拟,构建了模拟芯片工作状态下的温度分布和热变化的模型。实验中,以芯片样品的样本制备和测试平台搭建为基础,同时利用分类识别模型成功实现了对内部缺陷的有效分类,准确率高达99.17%。这种检测方法为高密度和微型化芯片的可靠性分析和故障诊断提供了一个经济高效的新途径。 展开更多
关键词 硅通孔 内部缺陷 传感阵列 检测技术 LSTM
在线阅读 下载PDF
基于倾斜旋转方法磁控溅射制备TSV阻挡层
5
作者 申菊 卢林红 +4 位作者 杜承钢 冉景杨 闵睿 杨发顺 马奎 《半导体技术》 CAS 北大核心 2024年第8期726-731,共6页
硅通孔(TSV)是实现三维集成的关键技术,在TSV侧壁制备连续和均匀的阻挡层至关重要。提出了一种磁控溅射制备TSV侧壁阻挡层的方法,将溅射基台倾斜一定角度并水平匀速旋转,使溅射离子的掉落方向与TSV侧壁不平行,靶材离子更容易溅射沉积在... 硅通孔(TSV)是实现三维集成的关键技术,在TSV侧壁制备连续和均匀的阻挡层至关重要。提出了一种磁控溅射制备TSV侧壁阻挡层的方法,将溅射基台倾斜一定角度并水平匀速旋转,使溅射离子的掉落方向与TSV侧壁不平行,靶材离子更容易溅射沉积在TSV侧壁,使得TSV侧壁都能被溅射到,更有利于制备连续和均匀的阻挡层。使用Ti靶进行直流磁控溅射,优化溅射电流和溅射气压,通过扫描电子显微镜(SEM)对TSV侧壁阻挡层的形貌进行表征分析。随着溅射电流和溅射气压的增大,阻挡层的厚度会增加,但是溅射气压的增大使得溅射钛晶粒变得细长,从而导致阻挡层的均匀性和致密性变差。 展开更多
关键词 硅通孔(tsv) 阻挡层 磁控溅射 溅射电流 溅射气压
在线阅读 下载PDF
退火对TSV电镀铜膜层性能影响研究 被引量:1
6
作者 于仙仙 蒋闯 张翠翠 《电镀与精饰》 CAS 北大核心 2024年第10期42-49,共8页
针对硅通孔(TSV)高深宽比微孔电镀填铜后结晶细小,后续制程经历高温过程可能导致晶界间缺陷的问题,对TSV电镀铜膜层退火后性能变化进行了研究。考察了退火温度和升温速率等退火条件对晶粒晶面取向、晶粒大小、晶界间空洞以及杂质含量等... 针对硅通孔(TSV)高深宽比微孔电镀填铜后结晶细小,后续制程经历高温过程可能导致晶界间缺陷的问题,对TSV电镀铜膜层退火后性能变化进行了研究。考察了退火温度和升温速率等退火条件对晶粒晶面取向、晶粒大小、晶界间空洞以及杂质含量等膜层性能的影响,确定了较优的退火工艺参数为升温速率10/min℃,400℃下保温2 h。结果表明:此较优的高温退火条件下,XRD显示主晶面择优取向为Cu(111);SIMS分析电镀铜膜层总杂质含量小于100 mg·kg^(–1);EBSD结果显示电镀铜平均粒径1.9μm,晶粒长大较充分,满足工业化应用需求,希望对工业化应用提供参考。 展开更多
关键词 硅通孔 电镀铜 添加剂 退火 缺陷 化学机械抛光 可靠性
在线阅读 下载PDF
A review of the carbon coating of the silicon anode in highperformance lithium-ion batteries 被引量:1
7
作者 XU Ze-yu SHAO Hai-bo WANG Jian-ming 《新型炭材料(中英文)》 SCIE EI CAS CSCD 北大核心 2024年第5期896-917,共22页
In the development of rechargeable lithium ion batteries(LIBs),silicon anodes have attracted much attention because of their extremely high theoretical capacity,relatively low Li-insertion voltage and the availability... In the development of rechargeable lithium ion batteries(LIBs),silicon anodes have attracted much attention because of their extremely high theoretical capacity,relatively low Li-insertion voltage and the availability of silicon resources.However,their large volume expansion and fragile solid electrolyte interface(SEI)film hinder their commercial application.To solve these problems,Si has been combined with various carbon materials to increase their structural stability and improve their interface properties.The use of different carbon materials,such as amorphous carbon and graphite,as three-dimensional(3D)protective anode coatings that help buffer mechanical strain and isolate the electrolyte is detailed,and novel methods for applying the coatings are outlined.However,carbon materials used as a protective layer still have some disadvantages,necessitating their modification.Recent developments have focused on modifying the protective carbon shells,and substitutes for the carbon have been suggested. 展开更多
关键词 Lithium-ion batteries silicon anode 3D carbon coating CARBON
在线阅读 下载PDF
Effects of Silicon Formulations on Cold Tolerance of Rice Seedlings 被引量:1
8
作者 Ren Hongyu Wang Wenbo +3 位作者 Li Xuecong Li Shuai Wen Yahuan Zhang Xingwen 《Journal of Northeast Agricultural University(English Edition)》 CAS 2024年第2期43-52,共10页
To investigate the effects of silicon formulations on the cold tolerance of rice seedlings,Song Japonica 16(not cold tolerant)and Dongnong 427(cold tolerant)rice varieties were used as test materials and four differen... To investigate the effects of silicon formulations on the cold tolerance of rice seedlings,Song Japonica 16(not cold tolerant)and Dongnong 427(cold tolerant)rice varieties were used as test materials and four different types of silicon formulations,Si-50-G,Si-60-G,Si-T-G,and Si-E-G,were applied as foliar sprays at the seedling stage,and a control group CK(equal amount of distilled water)was set up.One week after the first silicon spray,two types of rice were subjected to low-temperature stress treatments at day/night temperatures of 12℃/10℃for 2,4,6,and 8 days.The effects of different silicon formulations on the chlorophyll,proline(Pro)and soluble sugar contents as well as superoxide dismutase(SOD),peroxidase(POD)and catalase(CAT)activities of rice seedlings under low-temperature stress were compared to find out the effects of silicon formulations on the cold tolerance of rice seedlings.The results showed that silicon formulations could significantly increase the chlorophyll content of rice seedling leaves,with Si-50-G being the most effective,with a significant increment of 40.17%compared to the CK at 2 days of low temperature.Four silicon formulations significantly increased the proline content and soluble sugar content of rice leaves at low temperature for 4-8 days.For Song Japonica 16,the most significant increment in leaf POD activity was observed in Si-E-G treatment at 2,4 and 8 days of temperature stress,with 73.58%,20.95%and 217.24%increases compared to the CK,respectively.For 4 and 6 days of temperature stress,the most significant increase in CAT activity was observed in Si-E-G treatment,with 25.70%and 75.78%increases compared to the CK,respectively.For Dongnong 427,the Si-60-G treatment showed the highest increase in leaf SOD activity for 4 and 8 days of temperature stress,with significant increases of 58.15%and 82.76%compared to the CK,respectively,and the Si-E-G treatment showed the highest increase in leaf POD activity for 2 and 8 days of temperature stress,with significant increases of 97.75%and 245.10%compared to the CK,respectively.It showed that the spraying of silicon formulations could significantly enhance the cold tolerance of rice.This study provided a scientific basis for the rational use of silicon formulations to enhance cold tolerance in rice and had important theoretical and practical significance for ensuring sustainable high and stable rice yields in Heilongjiang Province,as well as for the development of silicon fertilizers. 展开更多
关键词 silicon formulation RICE seedling stage cold tolerance physiological indicator
在线阅读 下载PDF
Porous silicon/carbon composites as anodes for high-performance lithium-ion batteries
9
作者 TIAN Zhen-yu WANG Ya-fei +7 位作者 QIN Xin Shaislamov Ulugbek Hojamberdiev Mirabbos ZHENG Tong-hui DONG Shuo ZHANG Xing-hao KONG De-bin ZHI Lin-jie 《新型炭材料(中英文)》 SCIE EI CAS CSCD 北大核心 2024年第5期992-1002,共11页
Silicon anodes are promising for use in lithium-ion batteries.However,their practical application is severely limited by their large volume expansion leading to irreversible material fracture and electrical disconnect... Silicon anodes are promising for use in lithium-ion batteries.However,their practical application is severely limited by their large volume expansion leading to irreversible material fracture and electrical disconnects.This study proposes a new top-down strategy for preparing microsize porous silicon and introduces polyacrylonitrile(PAN)for a nitrogen-doped carbon coating,which is designed to maintain the internal pore volume and lower the expansion of the anode during lithiation and delithiation.We then explore the effect of temperature on the evolution of the structure of PAN and the electrochemical behavior of the composite electrode.After treatment at 400℃,the PAN coating retains a high nitrogen content of 11.35 at%,confirming the presence of C—N and C—O bonds that improve the ionic-electronic transport properties.This treatment not only results in a more intact carbon layer structure,but also introduces carbon defects,and produces a material that has remarkable stable cycling even at high rates.When cycled at 4 A g^(-1),the anode had a specific capacity of 857.6 mAh g^(-1) even after 200 cycles,demonstrating great potential for high-capacity energy storage applications. 展开更多
关键词 Porous silicon Lithium-ion batteries POLYACRYLONITRILE Electrochemical behavior
在线阅读 下载PDF
Effects of Silicon Preparation on Root Physiological Activity of Rice Under Cadmium Stress
10
作者 Ren Hongyu Wu Jianan +4 位作者 Wang Wenbo Li Shuai Wen Yahuan Lin Zixin Zhang Xingwen 《Journal of Northeast Agricultural University(English Edition)》 CAS 2024年第4期54-65,共12页
The rice Dongfu 159 was used for the potting experiment to simulate soil cadmium(Cd)stress,and four silicon preparations,Si-50-G and Si-60-G at a concentration of 0.20%and Si-T-G and Si-E-G at a concentration of 0.50%... The rice Dongfu 159 was used for the potting experiment to simulate soil cadmium(Cd)stress,and four silicon preparations,Si-50-G and Si-60-G at a concentration of 0.20%and Si-T-G and Si-E-G at a concentration of 0.50%,were applied at the tillering stage and booting stage of rice,respectively.The cadmium content,root vitality,root malondialdehyde(MDA)content,and antioxidant enzyme activity of each part of rice plants were determined,in order to provide a theoretical reference for exploring the mechanism of silicon fertilizer on the mitigation of Cd-stressed plants.The results showed that under the condition of cadmium stress,silicon application could significantly increase the root vitality and antioxidant enzyme activity,reduce the content of MDA,and reduce the accumulation of cadmium in various parts of rice.The treatment of Si-T-G applied at the tillering stage was the most effective in increasing the root vitality of rice,which was significantly increased by 63.00%compared with the CK.The treatment of Si-50-G applied at the stage of booting was the most effective in reducing MDA content of rice roots,which was significantly reduced by 30.16%compared with the CK.The treatment of Si-60-G applied at the stage of booting was the most effective in increasing the root superoxide dismutase(SOD)activity,which was significantly increased by 39.36%compared with the CK.The treatment of Si-60-G applied at the tillering stage was the most effective in increasing the root peroxidase(POD)and catalase(CAT)activities,which were significantly increased by 64.66%and 51.52%,respectively,compared with the CK.The treatment of Si-T-G applied at the tillering stage was the most effective in reducing Cd content of rice roots,stems and grains,which were significantly reduced by 39.53%,61.19%and 43.41%,respectively,compared with the CK,and the treatment of Si-60-G was the most effective in reducing Cd content of leaves,which was significantly reduced by 53.40%compared with the CK. 展开更多
关键词 cadmium stress RICE silicon preparation root physiological activity
在线阅读 下载PDF
Preparation and electrochemical lithium storage performance of porous silicon microsphere composite with metal modification and carbon coating
11
作者 XU Zeyu LU Tongzhou +1 位作者 SHAO Haibo WANG Jianming 《无机化学学报》 SCIE CAS CSCD 北大核心 2024年第10期1995-2008,共14页
This work adopts a multi⁃step etching⁃heat treatment strategy to prepare porous silicon microsphere com⁃posite with Sb⁃Sn surface modification and carbon coating(pSi/Sb⁃Sn@C),using industrial grade SiAl alloy micro⁃sp... This work adopts a multi⁃step etching⁃heat treatment strategy to prepare porous silicon microsphere com⁃posite with Sb⁃Sn surface modification and carbon coating(pSi/Sb⁃Sn@C),using industrial grade SiAl alloy micro⁃spheres as a precursor.pSi/Sb⁃Sn@C had a 3D structure with bimetallic(Sb⁃Sn)modified porous silicon micro⁃spheres(pSi/Sb⁃Sn)as the core and carbon coating as the shell.Carbon shells can improve the electronic conductivi⁃ty and mechanical stability of porous silicon microspheres,which is beneficial for obtaining a stable solid electrolyte interface(SEI)film.The 3D porous core promotes the diffusion of lithium ions,increases the intercalation/delithia⁃tion active sites,and buffers the volume expansion during the intercalation process.The introduction of active met⁃als(Sb⁃Sn)can improve the conductivity of the composite and contribute to a certain amount of lithium storage ca⁃pacity.Due to its unique composition and microstructure,pSi/Sb⁃Sn@C showed a reversible capacity of 1247.4 mAh·g^(-1) after 300 charge/discharge cycles at a current density of 1.0 A·g^(-1),demonstrating excellent rate lithium storage performance and enhanced electrochemical cycling stability. 展开更多
关键词 silicon⁃based anode porous structure metallic deposition carbon coating electrochemical lithium storage
在线阅读 下载PDF
绝缘硅脂对硅橡胶的溶胀及其性能影响 被引量:1
12
作者 王仲 汤沐寰 +3 位作者 贾利川 赵莉华 贾申利 任俊文 《高电压技术》 北大核心 2025年第3期1351-1360,共10页
现场发现电缆附件交联聚乙烯-硅橡胶界面的涂敷硅脂会干化,最终引起附件故障。干化的关键原因在于硅橡胶吸收硅脂,为了阐清电缆附件硅橡胶和硅脂的相容性以及溶胀对硅橡胶性能的影响,首先从硅脂结构性能、温度、直流电场和硅橡胶扩张应... 现场发现电缆附件交联聚乙烯-硅橡胶界面的涂敷硅脂会干化,最终引起附件故障。干化的关键原因在于硅橡胶吸收硅脂,为了阐清电缆附件硅橡胶和硅脂的相容性以及溶胀对硅橡胶性能的影响,首先从硅脂结构性能、温度、直流电场和硅橡胶扩张应变多方面分析硅橡胶对硅脂的吸收特性,然后利用现代材料分析方法研究吸收硅脂进程对硅橡胶性能的影响规律。文中定义系数P表示硅脂综合性质的特征参数,该系数由硅油分子量、极性大小和硅脂含油率共同决定,结果表明选择系数P较小的绝缘硅脂可减缓硅橡胶溶胀程度,而高温、正直流电场以及硅橡胶高扩张应变均会加剧溶胀现象,最终使得硅橡胶交联密度、活化能以及体积电阻率、介电性能、击穿强度均有一定下降,材料的表面电位和陷阱特性也受到影响。 展开更多
关键词 电缆附件 绝缘硅脂 硅橡胶 溶胀效应 陷阱特性
在线阅读 下载PDF
32×32元硅盖革APD探测器的凝视型激光3维成像 被引量:1
13
作者 王江 王鸥 +5 位作者 陈蔚 袁利 柯尊贵 郝昕 孔繁林 姜鹏 《激光技术》 北大核心 2025年第3期463-468,共6页
为了实现对特定目标区域的高精度探测,采用了凝视型激光3维成像技术,基于自研32×32元硅盖革模式激光焦平面探测器,搭建了一套1064 nm激光3维成像实验系统。探测器组件采用带有温度采样与控制模块的斯特林制冷型封装技术,实现了在... 为了实现对特定目标区域的高精度探测,采用了凝视型激光3维成像技术,基于自研32×32元硅盖革模式激光焦平面探测器,搭建了一套1064 nm激光3维成像实验系统。探测器组件采用带有温度采样与控制模块的斯特林制冷型封装技术,实现了在深低温环境下的高控温精度、高稳定性运行;成像系统通过发射脉冲激光点阵照射目标区域,并利用上述探测器捕获激光回波信号;经距离门噪声过滤和3维点云数据预处理后,取得了200 m处目标的3维距离图像以及670 m处目标的2维强度图像。结果表明,该激光3维成像系统具有30 cm的距离分辨率,可精确展现目标的几何细节。该研究为硅盖革模式激光焦平面探测器凝视3维成像技术的实际工程应用提供了参考。 展开更多
关键词 传感器技术 凝视型激光3维成像 雪崩光电二极管 盖革模式
在线阅读 下载PDF
惰气熔融–红外吸收/热导法同时测定氮化硅中的低氧高氮 被引量:1
14
作者 王琳 王楠 +1 位作者 任士远 张彬彬 《中国陶瓷》 北大核心 2025年第1期20-25,共6页
氮化硅是性能优异的陶瓷材料,在航空航天、国防军工等方面有着重要的作用。氮化硅中的杂质元素氧与主元素氮对其制备工艺及高纯化发展至关重要。通过对称样量、脱气功率、分析功率、氧的开始基线时间、助熔剂种类及比例、坩埚选择等因... 氮化硅是性能优异的陶瓷材料,在航空航天、国防军工等方面有着重要的作用。氮化硅中的杂质元素氧与主元素氮对其制备工艺及高纯化发展至关重要。通过对称样量、脱气功率、分析功率、氧的开始基线时间、助熔剂种类及比例、坩埚选择等因素的探究,建立了惰气熔融–红外吸收/热导法同时测定氮化硅中的低氧高氮,并通过标准物质验证了方法的准确性、精密度与回收率。结果表明,当称样量为0.0700 g、脱气功率为5000 W、分析功率为5500 W、氧的开始基线时间为1 s、助熔剂为0.60 g镍囊、坩埚为石墨套坩埚时,可以得到稳定、准确的测试结果。以此实验条件使用标准物质建立了标准曲线,并进行了加标回收实验和精密度实验,氧、氮标准曲线线性相关系数分别为0.999922、0.999990,加标回收率为96.9%~102.7%,88.2%~97.7%,氧的RSD(n=7)分别为1.99%、0.45%、氮的RSD(n=7)分别为0.63%、0.79%。方法的检出限分别为0.000306%、0.00864%,定量限为0.000102%、0.00881%。该方法可用于快速、准确、同时检测氮化硅中的低氧高氮。 展开更多
关键词 氮化硅 惰气熔融–红外吸收/热导法
在线阅读 下载PDF
光伏单晶硅片冲洗过程中应力分布的研究
15
作者 李涛 吕国强 +2 位作者 李遇贤 钱益超 张杰 《材料导报》 北大核心 2025年第7期39-45,共7页
在光伏单晶硅片冲洗过程中,产生的最大应力可能导致硅片损伤,硅片上应力的分布及硅片上最大应力位置的确定对于降低硅片的损伤程度有重要意义。首先基于矩形板的Levy解模型,计算冲洗过程中不同尺寸硅片上的挠度和应力值;然后,运用ABAQU... 在光伏单晶硅片冲洗过程中,产生的最大应力可能导致硅片损伤,硅片上应力的分布及硅片上最大应力位置的确定对于降低硅片的损伤程度有重要意义。首先基于矩形板的Levy解模型,计算冲洗过程中不同尺寸硅片上的挠度和应力值;然后,运用ABAQUS有限元软件对硅片冲洗过程中产生的应力进行仿真。结果表明,运用矩形板Levy解模型计算时,特定比值下,当硅片的长宽比b/a=2、1、0.5时,最大应力值出现在自由边上(y=b)或固支边上(y=0)。当硅片宽度a固定、长度b逐渐增加时,在固支边上长宽比b/a=0.5时应力值最大,在自由边上长宽比b/a=0.9时应力值最大;当硅片的长宽比b/a=0.1~1.5时,硅片的最大应力分布在固支边上;当硅片的长宽比b/a=1.5~2时,硅片的最大应力分布在自由边上。通过最大挠度确定最大应力位置,虽然能减少大量计算,但是不够全面和准确。运用ABAQUS有限元分析得出的结果与矩形板Levy解模型计算得出的应力分布规律一致,但是应力值存在一定的误差。将矩形板Levy解模型得出的结果与莫尔理论结合,推导出硅片上冲洗压力与硅片厚度的关系公式。利用该公式,当硅片厚度确定时,能计算出硅片上承受的最大冲洗压力;当冲洗压力确定时,能得出硅片冲洗时不被破坏的最小厚度。 展开更多
关键词 光伏单晶硅 矩形板Levy解 单晶硅片冲洗 应力
在线阅读 下载PDF
高低温和硬度对电缆附件硅橡胶材料绝缘性能的影响及机理分析 被引量:1
16
作者 张帆 王景兵 +5 位作者 齐朋帅 周旭光 张连康 王家兴 魏艳慧 李国倡 《高压电器》 北大核心 2025年第2期102-110,共9页
温度是影响电缆附件绝缘性能的关键因素。文中分析了不同硬度硅橡胶材料的红外光谱和玻璃化转变特性,测试分析了高低温环境-40~+60℃下不同硬度电缆附件硅橡胶材料的介电性能、电阻特性和击穿特性;从微观层面,通过计算分析不同温度硅橡... 温度是影响电缆附件绝缘性能的关键因素。文中分析了不同硬度硅橡胶材料的红外光谱和玻璃化转变特性,测试分析了高低温环境-40~+60℃下不同硬度电缆附件硅橡胶材料的介电性能、电阻特性和击穿特性;从微观层面,通过计算分析不同温度硅橡胶的自由体积和均方位移等参数,揭示了高低温对硅橡胶材料绝缘性能的影响机理。研究表明,随着温度升高,硬度40 HA硅橡胶相对介电常数从3.66下降到3.22,下降约12%,相比而言90 HA硅橡胶下降约15%;两者介质损耗角正切值在-40~+60℃范围内均基本不变,平均值分别为1.46×10^(-3)和1.57×10^(-3)。这是由于温度的升高,硅橡胶分子均方位移增大,这种无序性运动阻碍了束缚电荷极化过程;此外,白炭黑含量增大会提高硬度90 HA硅橡胶的介电常数。随着温度的升高-40~+60℃,硬度40 HA硅橡胶材料体积电阻率从1.24×10^(17)Ω·cm下降到1.14×10^(15)Ω·cm;同一温度下硬度90 HA硅橡胶体积电阻率整体降低约1个量级。这主要与温度引起的载流子浓度、迁移率变化以及白炭黑的含量有关系。随着温度的升高-40~+60℃硬度40 HA硅橡胶击穿场强从39.29 kV/mm下降到23.98 kV/mm,下降约39%,同一温度下硬度90 HA的试样击穿强度略有降低。这是由于温度升高硅橡胶自由体积增大,导致电子自由行程变大,自由电子加速获得的能量更多;同时,白炭黑作为杂质引入会导致硅橡胶发生弱点击穿概率增加。该工作对于电缆附件异常分析和性能提升具有指导意义。 展开更多
关键词 电缆附件 硅橡胶 高低温 硬度
在线阅读 下载PDF
“点赞”形态前臂动脉铸型制作及原形透明包埋方法
17
作者 肖钊明 马梓玮 +6 位作者 李泽宇 刘畅 许广威 梁海彬 周贤熙 戴景兴 欧阳钧 《中国临床解剖学杂志》 北大核心 2025年第4期483-485,共3页
目的 制作“点赞”的前臂及手掌动脉铸型以及为其原型包埋,为临床诊治,解剖学的教学、科研及科普提供直观的血管原型包埋模型,为其他不同形态的铸型标本的原型包埋提供经验及依据。方法 以带造型手掌为模,以硅胶及石膏为材料,制作阴阳... 目的 制作“点赞”的前臂及手掌动脉铸型以及为其原型包埋,为临床诊治,解剖学的教学、科研及科普提供直观的血管原型包埋模型,为其他不同形态的铸型标本的原型包埋提供经验及依据。方法 以带造型手掌为模,以硅胶及石膏为材料,制作阴阳面硅胶包埋模具,然后把标本灌注,腐蚀,最后把铸型放进硅胶模具内,使用水晶AB胶浇注。结果 水晶模型透明度高,无气泡,造型与设计一致,能够清晰地观察内部的血管铸型的管道走行及分布,清晰的观察到血管铸型与表皮及关节之间的空间比邻关系。结论 制作成本低廉,性价比高;血管铸型真实、精细,本方法可体现血管在不同姿势下,与表皮及关节之间的空间比邻关系,为临床诊治,解剖学的教学、科研及科普提供直观的血管原型包埋模型,可为其他不同形态的铸型标本的原型包埋提供经验及依据。 展开更多
关键词 铸型 包埋 硅胶 水晶AB胶
在线阅读 下载PDF
基于简易冲击分解模型的爆轰驱动硅橡胶数值模拟及实验解读
18
作者 刘军 殷建伟 张凤国 《爆炸与冲击》 EI CAS 北大核心 2025年第1期123-132,共10页
为了反映爆轰驱动下硅橡胶发生冲击分解反应的物理过程,提出了一种简易的硅橡胶冲击分解模型。基于该模型,对爆轰驱动含硅橡胶夹层钢板实验进行了模拟,并分析解读了钢板的自由面速度。结果表明,实验中硅橡胶发生了冲击分解反应,导致钢... 为了反映爆轰驱动下硅橡胶发生冲击分解反应的物理过程,提出了一种简易的硅橡胶冲击分解模型。基于该模型,对爆轰驱动含硅橡胶夹层钢板实验进行了模拟,并分析解读了钢板的自由面速度。结果表明,实验中硅橡胶发生了冲击分解反应,导致钢板的自由面速度曲线出现了首次起跳中间速度平台及首次起跳速度峰值降低的现象。受硅橡胶冲击分解影响,首次入射波压力将在临界冲击分解压力附近弛豫一段时间,再继续升高至最高压力。该压力波作用于钢板的自由面后,出现了自由面速度在中间速度平台停留一段时间,之后继续升高至速度峰值的现象。硅橡胶冲击分解后的气相物质可压缩性较高,首次加载波内较多的能量被用于压缩气体做功,导致首次波传播至自由面时能量衰减,峰值压力降低,首次起跳速度峰值降低。 展开更多
关键词 硅橡胶 爆轰驱动 冲击分解 分解压力
在线阅读 下载PDF
硅元素对植物旱盐胁迫的缓解作用研究进展
19
作者 范铭 张恩和 郭凤霞 《甘肃农业大学学报》 北大核心 2025年第2期223-232,共10页
【目的】硅作为一种对植物有益的环境友好型元素,目前已被广泛地应用于逆境胁迫领域,综述硅缓解胁迫效应研究进展,为硅元素应用提供一定的参考依据。【方法】综合国内外现有研究结果,总结了硅缓解旱盐胁迫下植物生长、光合和呼吸作用的... 【目的】硅作为一种对植物有益的环境友好型元素,目前已被广泛地应用于逆境胁迫领域,综述硅缓解胁迫效应研究进展,为硅元素应用提供一定的参考依据。【方法】综合国内外现有研究结果,总结了硅缓解旱盐胁迫下植物生长、光合和呼吸作用的效应及其作用机制。【结果】综合现有结果,认为硅可通过促进旱盐胁迫下植物种子萌发、改善植物形态结构、促进根系发育等促进生物量积累,提高产量和品质;硅可以通过保护叶片光系统结构、优化光能利用率、增强碳固定过程等促进植物光合作用;通过保护线粒体膜结构和调控呼吸代谢途径,为植物生命活动提供更多的ATP以抵抗胁迫。【结论】建议未来增强硅缓解复合胁迫的效应和机制研究,充分利用分子生物学、多组学等新兴研究技术,以更深层次揭示硅调控植物耐盐耐旱性的机理机制。 展开更多
关键词 干旱胁迫 盐胁迫 光合作用 呼吸作用
在线阅读 下载PDF
无机填料对硅橡胶基耐热复合涂层的影响
20
作者 杨晓军 文卿 +1 位作者 符寒光 贺定勇 《北京工业大学学报》 CAS 北大核心 2025年第1期13-21,共9页
以硅橡胶为基体,添加无机填料制备的耐热涂层在耐热防腐方面有重要应用前景。采用自制改性硅橡胶作基体,添加不同配比的高岭土、二氧化硅和氧化铝,制备了复合涂层。采用扫描电子显微镜(scanning electron microscopy,SEM)观察了硅橡胶... 以硅橡胶为基体,添加无机填料制备的耐热涂层在耐热防腐方面有重要应用前景。采用自制改性硅橡胶作基体,添加不同配比的高岭土、二氧化硅和氧化铝,制备了复合涂层。采用扫描电子显微镜(scanning electron microscopy,SEM)观察了硅橡胶基体中无机填料的分散状况,采用热重分析仪(thermogravimetric analyzer,TGA)对复合涂层的热解温度和失重率进行了分析。结果表明:在复合体系中,无机填料与基体的相容性较好,分散均匀;与基体材料相比,无机填料的添加可有效提高复合材料的耐热性。填料质量分数为20%的复合涂层,其在800℃时质量残留率比自制改性硅橡胶的基体提高了10%以上。 展开更多
关键词 硅橡胶 高岭土 耐热性 微观形貌 涂层 复合材料
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部