It has been demonstrated that almost all polymer-clay nanocomposites show higher temperature stability than that of pure polymer, which is attributed to the active exfoliated clay nanosheet firmly adsorbed onto the po...It has been demonstrated that almost all polymer-clay nanocomposites show higher temperature stability than that of pure polymer, which is attributed to the active exfoliated clay nanosheet firmly adsorbed onto the polymer chains, due to polerization and nucleation effect, the clay nanosheets could protect the polymer chains from destroying. To prove such mechanism, the water-soluble polymer nanocomposites(AAA/SLS-MMT) were synthesized by the in-situ polymerization of 2-acrylamide-2-methyl-propane sulfonic acid, acrylamide, 4-acryloylmorpholine, and organically modified montmorillonite. The techniques of nuclear magnetic resonance, atomic force microscopy and scanning electron microscopy etc., clearly characterized the successful synthesized of sample's structure, the exfoliated MMT nanosheet adsorbed polymer chain's scale, and well-dispersed morphology, espectively. The adsorption model, X-ray photoelectron spectroscopy presented the existence of strong adsorption, while molecular simulation calculations first concluded that the strong adsorption energy was-13032.06 kcal/mol. Thermo-gravimetric-analysis proved the temperature of maximum thermal degradation of powder sample(AAA/1.0 wt% SLS-MMT) was over 298℃. After ageing at 180℃ for 4 h, the apparent viscosity of 5 g/L AAA/1.0 wt% SLS-MMT aqueous solution was 326.7 mPa,s, while that of pure polymer(AAA) was only 8.3 mPa,s. This optimized sample has the smallest FLAPIvalue at all test temperatures from 180 to 220℃ in both fresh and salt water based drilling fluid. All the evidences of high temperature resistance indicate that the strong adsorption can enhance the thickness of hydrated shell and adsorption of clay particles in drilling fluid at high temperature. Such mechanism supplied the better way to design high-temperature resistant fluid loss additives for deep and ultra-deep oil and gas formation engineering.展开更多
Solid-state polymer electrolytes(SPEs) capable of withstanding high voltage are considered to be key for next-generation energy storage devices with inherent safety as well as high energy density.This study involves t...Solid-state polymer electrolytes(SPEs) capable of withstanding high voltage are considered to be key for next-generation energy storage devices with inherent safety as well as high energy density.This study involves the rational design of solid-state-C≡N functionalized P(VEC_1-CEA_(0.3))/LiTFSI@CE SPEs and its synthesis by in-situ free radical polymerization of vinyl ethylene carbonate(VEC) and 2-cyanoethyl acrylate(CEA).In situ polymerization yields electrode/electrolyte interfaces with low interfacial resistance,forming a stable SEI layer enriched with LiF,Li_(3)N,and RCOOLi,ensuring stable Li plating/stripping for over 1400 h.The-C≡N moiety renders the αH on the adjacent αC positively charged,thereby endowing it with the capability to anchor TFSI^(-).Simultaneously,the incorporation of-C≡N moiety diminishes the electron-donating ability of the C=O,C-O-C,and-C≡N functional groups,facilitating not only the ion conductivity enhancement but also a more rapid Li^(+)migration proved by DFT theoretical calculations and Raman spectroscopy.At room temperature,t_(Li+) of 0.60 for P(VEC_1-CEA_(0.3))/LiTFSI@CE SPEs is achieved when the ionic conductivity σ_(Li+)is 2.63×10^(-4) S cm^(-1) and the electrochemical window is expanded to5.0 V.Both coin cells with high-areal-loading cathodes and the 6.5-mAh pouch cell,exhibit stable charge/discharge cycling.At 25℃,the 4.45-V Li|P(VEC_1-CEA_(0.3))/LiTFSI@CE|LiCoO_(2) battery performs stable cycling over 200 cycles at 0.2 C,with a capacity retention of 82.1%.展开更多
Gel-based polymer electrolytes are limited by the polarity of the residual solvent,which restricts the coupling-breaking behaviour during Li^(+)conduction,resulting in the Li^(+)transport kinetics being greatly affect...Gel-based polymer electrolytes are limited by the polarity of the residual solvent,which restricts the coupling-breaking behaviour during Li^(+)conduction,resulting in the Li^(+)transport kinetics being greatly affected.Here,we designed anion competitive gel polymer electrolyte(ACPE)by introducing lithium difluoro(oxalato)borate(LiDFOB)anion into the 1,3-dioxolane(DOL)in situ polymerisation system.ACPE enhances the ionic dipole interaction between Li^(+)and the solvent molecules and synergizes with Li^(+)across the solvation site of the polymer ethylene oxide(EO)unit,combination that greatly improves the Li^(+)transport efficiency.As a result,ACPE exhibits 1.12 mS cm^(−1)ionic conductivity and 0.75 Li^(+)transfer number at room temperature.Additionally,this intra-polymer solvation sheath allows preferential desolvation of DFOB−,which contributes to the formation of kinetically stable anion-derived interphase and effectively mitigates side reactions.Our results demonstrate that the assembled Li||NCM622 solid-state battery exhibits lifespan of over 300 cycles with average Coulombic efficiency of 98.8%and capacity retention of 80.3%.This study introduces a novel approach for ion migration and interface design,paving the way for high-safety and high-energy-density batteries.展开更多
Solid-state lithium metal batteries are promising next-generation batteries for both micro-scale integrated electronic devices and macro-scale electric vehicles.However,electrochemical incompatibility between electrol...Solid-state lithium metal batteries are promising next-generation batteries for both micro-scale integrated electronic devices and macro-scale electric vehicles.However,electrochemical incompatibility between electrolyte and electrodes causes continuous performance degradation.Here,we report a unique design of a double-layer composite solid-state electrolyte(D-CSE),where each layer,composed of both polymer and ceramics,is electrochemically compatible with its contacting electrode(Li anode or LiCoO_(2)cathode).The D-CSE has a small thickness(50μm),high thermal stability(up to 160℃ without noticeable deformation),and good flexibility even at a high ceramics content(66.7 wt%).Large-area selfstanding film can be obtained by a facile coating route.The electrolyte/electrode interface can be further enhanced via forming a soft interface by in-situ polymerization.Quasi-solid-state Li|D-CSE|LiCoO_(2)coin cells with the cathode-supported D-CSE can deliver a high initial discharge capacity of 134 mAh g^(-1) and a high capacity retention of 83%after 200 cycles at 0.5 C and 60℃.Quasi-solid-state Li|D-CSE|LiCoO_(2)pouch cells(designed capacity 8.6 mAh)with the self-standing D-CSE have a high retention of80%after 180 cycles at 2 mA charge and 4 mA discharge.At a high cathode loading(19.1 mg cm^(-2)),the Li|D-CSE|LiCoO_(2)pouch cell still can be stably cycled,and can withstand abuse tests of folding,cutting and nail penetration,indicating practical applications of the D-CSE.展开更多
基金financially supported by the National Major Project (No. 2017ZX05009-003,50)National Natural Science Foundation of China (No. 51974339+2 种基金51674270)Foreign Expert Project of the Belt and Road Innovation Talents Exchange (DL2022122001)the Research Institute of Petroleum Exploration Development of China National Petroleum Cooperation (HX20201095)。
文摘It has been demonstrated that almost all polymer-clay nanocomposites show higher temperature stability than that of pure polymer, which is attributed to the active exfoliated clay nanosheet firmly adsorbed onto the polymer chains, due to polerization and nucleation effect, the clay nanosheets could protect the polymer chains from destroying. To prove such mechanism, the water-soluble polymer nanocomposites(AAA/SLS-MMT) were synthesized by the in-situ polymerization of 2-acrylamide-2-methyl-propane sulfonic acid, acrylamide, 4-acryloylmorpholine, and organically modified montmorillonite. The techniques of nuclear magnetic resonance, atomic force microscopy and scanning electron microscopy etc., clearly characterized the successful synthesized of sample's structure, the exfoliated MMT nanosheet adsorbed polymer chain's scale, and well-dispersed morphology, espectively. The adsorption model, X-ray photoelectron spectroscopy presented the existence of strong adsorption, while molecular simulation calculations first concluded that the strong adsorption energy was-13032.06 kcal/mol. Thermo-gravimetric-analysis proved the temperature of maximum thermal degradation of powder sample(AAA/1.0 wt% SLS-MMT) was over 298℃. After ageing at 180℃ for 4 h, the apparent viscosity of 5 g/L AAA/1.0 wt% SLS-MMT aqueous solution was 326.7 mPa,s, while that of pure polymer(AAA) was only 8.3 mPa,s. This optimized sample has the smallest FLAPIvalue at all test temperatures from 180 to 220℃ in both fresh and salt water based drilling fluid. All the evidences of high temperature resistance indicate that the strong adsorption can enhance the thickness of hydrated shell and adsorption of clay particles in drilling fluid at high temperature. Such mechanism supplied the better way to design high-temperature resistant fluid loss additives for deep and ultra-deep oil and gas formation engineering.
基金National Natural Science Foundation of China (22078228)。
文摘Solid-state polymer electrolytes(SPEs) capable of withstanding high voltage are considered to be key for next-generation energy storage devices with inherent safety as well as high energy density.This study involves the rational design of solid-state-C≡N functionalized P(VEC_1-CEA_(0.3))/LiTFSI@CE SPEs and its synthesis by in-situ free radical polymerization of vinyl ethylene carbonate(VEC) and 2-cyanoethyl acrylate(CEA).In situ polymerization yields electrode/electrolyte interfaces with low interfacial resistance,forming a stable SEI layer enriched with LiF,Li_(3)N,and RCOOLi,ensuring stable Li plating/stripping for over 1400 h.The-C≡N moiety renders the αH on the adjacent αC positively charged,thereby endowing it with the capability to anchor TFSI^(-).Simultaneously,the incorporation of-C≡N moiety diminishes the electron-donating ability of the C=O,C-O-C,and-C≡N functional groups,facilitating not only the ion conductivity enhancement but also a more rapid Li^(+)migration proved by DFT theoretical calculations and Raman spectroscopy.At room temperature,t_(Li+) of 0.60 for P(VEC_1-CEA_(0.3))/LiTFSI@CE SPEs is achieved when the ionic conductivity σ_(Li+)is 2.63×10^(-4) S cm^(-1) and the electrochemical window is expanded to5.0 V.Both coin cells with high-areal-loading cathodes and the 6.5-mAh pouch cell,exhibit stable charge/discharge cycling.At 25℃,the 4.45-V Li|P(VEC_1-CEA_(0.3))/LiTFSI@CE|LiCoO_(2) battery performs stable cycling over 200 cycles at 0.2 C,with a capacity retention of 82.1%.
基金supported by the National Natural Science Foundation of China(22008053,52002111)the Natural Science Foundation of Hebei Province(B2021208061,B2022208006,B2023208014)the Beijing Natural Science Foundation(Z200011).
文摘Gel-based polymer electrolytes are limited by the polarity of the residual solvent,which restricts the coupling-breaking behaviour during Li^(+)conduction,resulting in the Li^(+)transport kinetics being greatly affected.Here,we designed anion competitive gel polymer electrolyte(ACPE)by introducing lithium difluoro(oxalato)borate(LiDFOB)anion into the 1,3-dioxolane(DOL)in situ polymerisation system.ACPE enhances the ionic dipole interaction between Li^(+)and the solvent molecules and synergizes with Li^(+)across the solvation site of the polymer ethylene oxide(EO)unit,combination that greatly improves the Li^(+)transport efficiency.As a result,ACPE exhibits 1.12 mS cm^(−1)ionic conductivity and 0.75 Li^(+)transfer number at room temperature.Additionally,this intra-polymer solvation sheath allows preferential desolvation of DFOB−,which contributes to the formation of kinetically stable anion-derived interphase and effectively mitigates side reactions.Our results demonstrate that the assembled Li||NCM622 solid-state battery exhibits lifespan of over 300 cycles with average Coulombic efficiency of 98.8%and capacity retention of 80.3%.This study introduces a novel approach for ion migration and interface design,paving the way for high-safety and high-energy-density batteries.
基金supported by the National Natural Science Foundation of China(Grant No.51572238,51725102)the Zhejiang Provincial Natural Science Foundation of China(Grant No.LY19E020013)Hunan Provincial Science and Technology Major Project of China(Grant Nos.2020GK1014,2021GK2018)。
文摘Solid-state lithium metal batteries are promising next-generation batteries for both micro-scale integrated electronic devices and macro-scale electric vehicles.However,electrochemical incompatibility between electrolyte and electrodes causes continuous performance degradation.Here,we report a unique design of a double-layer composite solid-state electrolyte(D-CSE),where each layer,composed of both polymer and ceramics,is electrochemically compatible with its contacting electrode(Li anode or LiCoO_(2)cathode).The D-CSE has a small thickness(50μm),high thermal stability(up to 160℃ without noticeable deformation),and good flexibility even at a high ceramics content(66.7 wt%).Large-area selfstanding film can be obtained by a facile coating route.The electrolyte/electrode interface can be further enhanced via forming a soft interface by in-situ polymerization.Quasi-solid-state Li|D-CSE|LiCoO_(2)coin cells with the cathode-supported D-CSE can deliver a high initial discharge capacity of 134 mAh g^(-1) and a high capacity retention of 83%after 200 cycles at 0.5 C and 60℃.Quasi-solid-state Li|D-CSE|LiCoO_(2)pouch cells(designed capacity 8.6 mAh)with the self-standing D-CSE have a high retention of80%after 180 cycles at 2 mA charge and 4 mA discharge.At a high cathode loading(19.1 mg cm^(-2)),the Li|D-CSE|LiCoO_(2)pouch cell still can be stably cycled,and can withstand abuse tests of folding,cutting and nail penetration,indicating practical applications of the D-CSE.
