Methyl diethanolamine fatty acid esters, viz. methyl diethanolamine octanoate and methyl diethanolamine oleate,were prepared. Their impacts on the biodegradability and tribological properties of mineral base oil 400 S...Methyl diethanolamine fatty acid esters, viz. methyl diethanolamine octanoate and methyl diethanolamine oleate,were prepared. Their impacts on the biodegradability and tribological properties of mineral base oil 400 SN were evaluated by a tester for fast evaluating the biodegradability of lubricants and by a four-ball tester, respectively. The results showed that methyl diethanolamine octanoate and methyl diethanolamine oleate both could markedly promote the biodegradation of the oil and improved its tribological properties. The improvement of biodegradability was attributed to the enhanced growth and quantity of microbes by methyl diethanolamine fatty acid esters. The worn surfaces were analyzed by a scanning electron microscope(SEM) equipped with an energy dispersive spectrometer(EDS) and an X-ray photoelectron spectroscope(XPS). The results indicated that the enhancement of friction-reducing and anti-wear properties of the mineral oil was attributed to the formation of complicated boundary lubrication films composed of species such as Fe_2O_3, Fe_3O_4 and organic nitrogen-containing compounds with a structure of –C-N-or R-NH_2.展开更多
Ni–Ga alloy(Ni/Ga atomic ratio of 8),Ni3Ga and Ni5Ga3 intermetallic compounds(IMCs)catalysts were prepared from Ni–Mg-Al-Ga layered double hydroxides(LDHs)for the deoxygenation of methyl esters to hydrocarbons.In th...Ni–Ga alloy(Ni/Ga atomic ratio of 8),Ni3Ga and Ni5Ga3 intermetallic compounds(IMCs)catalysts were prepared from Ni–Mg-Al-Ga layered double hydroxides(LDHs)for the deoxygenation of methyl esters to hydrocarbons.In the alloy and IMCs,the presence of Ga reduced the surface Ni atom density,and the charge transfer from Ga to Ni increased the electron density of Ni.In the deoxygenation of methyl laurate,the Ni catalyst gave a complete hydrogenolysis of methyl laurate to CH4at 330°C and 3.0 MPa,while the presence of Ga promoted the HDO pathway and suppressed C–C bond hydrogenolysis and methanation.The Ni5Ga3 catalyst exhibited the best desired performance.Even at 400°C,it gave the yield of C11 and C12 hydrocarbons of ~99%,and the selectivity to CH4(SCH4) was only 2.4%.In the deoxygenation of methyl octanoate and methyl palmitate,the Ni5Ga3 catalyst also gave the yield of hydrocarbons above95%.Reactivity evaluation and methyl propionate-TPD and TPSR results indicate that the C–OCH3 bond instead of the O–CH3 one was cleaved on both Ni and bimetallic Ni–Ga catalysts.It is highlighted that methanol,derived from the C–OCH3 bond hydrogenolysis,mainly decomposed to CO and H2 on IMCs,while it was converted to methane on metallic Ni and alloy.It is of great significance that H2 could be yielded from the methyl ester itself.In short,the utilization of Ni–Ga IMCs can effectively reduce carbon loss and H2 consumption,all of which are ascribed to the geometric and electronic effects of Ga.展开更多
The non-edible oils are believed to be one of the major feedstock for the production of biodiesel in future.In the present study,we investigated the production of Jatropha oil methyl esters（JOMEs） via alkali-catalyz...The non-edible oils are believed to be one of the major feedstock for the production of biodiesel in future.In the present study,we investigated the production of Jatropha oil methyl esters（JOMEs） via alkali-catalyzed transesterification route.The biophysical characteristics of Jatropha oil were found within the optimal range in accordance with ASTM standards as a substitute diesel fuel.The chemical composition and production yield of as-synthesized biodiesel were confirmed by various analytical techniques such as FT-IR,1H NMR,13 C NMR and gas chromatography coupled with mass spectrometry.A high percentage conversion,～96.09%,of fatty acids into esters was achieved under optimized transesterification conditions with 6 ：1 oil to methanol ratio and 0.9 wt% Na OH for 50 min at ～60°C.Moreover,twelve fatty acids methyl esters（FAME） were quantified in the GC/MS analysis and it was interesting to note that the mass fragmentation pattern of saturated,monounsaturated and diunsaturated FAME was comparable with the literature reported values.展开更多
本文利用乙酸银修饰的氧化铝-硅胶材料制备固相萃取柱对船用残渣燃料油样品进行净化分离,结合气相色谱-串联质谱技术,使用DB-35 MS UI色谱柱分离,多反应监控模式,内标法定量测定酚类及脂肪酸甲酯(FAME)类化合物。对影响酚类和FAME类化...本文利用乙酸银修饰的氧化铝-硅胶材料制备固相萃取柱对船用残渣燃料油样品进行净化分离,结合气相色谱-串联质谱技术,使用DB-35 MS UI色谱柱分离,多反应监控模式,内标法定量测定酚类及脂肪酸甲酯(FAME)类化合物。对影响酚类和FAME类化合物的进样方式、萃取溶剂的选择、固相萃取柱类型的选择以及淋洗和洗脱条件进行了优化,建立了船用残渣燃料油中酚类及FAME类化合物的测定方法。方法在浓度0.05~2.5μg/mL范围线性良好,具有检出限(0.1~1.2 mg/kg)和定量限(0.3~4.0 mg/kg)低,稳定性好和萃取效率高,以及基质效应不显著等优势。通过用不含目标物的空白燃料油配制0.10、0.50、2.50 mg/L浓度水平的试样考察方法的可靠性,获得满意的回收率(85.5%~115.4%)和相对标准偏差(RSD≤6.2%)。实验结果表明,建立的方法可实现船用残渣燃料油中酚类及FAME类化合物的有效检测。另外,劣质船用燃油存在不少的酚类和FAME类物质,高浓度苯酚、甲酚、二甲酚、对枯基苯酚、脂肪酸甲酯等物质可能是导致船舶油泵损坏的重要原因。展开更多
基金financial supports from National Defense Science Technology Foundation (Project No.3604003)National Natural Science Foundation of China (Project No.51375491)+1 种基金Natural Science Foundation of Chongqing (Project No. CSTC 2014JCYJAA50021)Natural Science Foundation of Chongqing (Project No. cstc2017jcyjAX0058)
文摘Methyl diethanolamine fatty acid esters, viz. methyl diethanolamine octanoate and methyl diethanolamine oleate,were prepared. Their impacts on the biodegradability and tribological properties of mineral base oil 400 SN were evaluated by a tester for fast evaluating the biodegradability of lubricants and by a four-ball tester, respectively. The results showed that methyl diethanolamine octanoate and methyl diethanolamine oleate both could markedly promote the biodegradation of the oil and improved its tribological properties. The improvement of biodegradability was attributed to the enhanced growth and quantity of microbes by methyl diethanolamine fatty acid esters. The worn surfaces were analyzed by a scanning electron microscope(SEM) equipped with an energy dispersive spectrometer(EDS) and an X-ray photoelectron spectroscope(XPS). The results indicated that the enhancement of friction-reducing and anti-wear properties of the mineral oil was attributed to the formation of complicated boundary lubrication films composed of species such as Fe_2O_3, Fe_3O_4 and organic nitrogen-containing compounds with a structure of –C-N-or R-NH_2.
基金support from the National Natural Science Foundation of China(Nos.21576193 and 21176177)。
文摘Ni–Ga alloy(Ni/Ga atomic ratio of 8),Ni3Ga and Ni5Ga3 intermetallic compounds(IMCs)catalysts were prepared from Ni–Mg-Al-Ga layered double hydroxides(LDHs)for the deoxygenation of methyl esters to hydrocarbons.In the alloy and IMCs,the presence of Ga reduced the surface Ni atom density,and the charge transfer from Ga to Ni increased the electron density of Ni.In the deoxygenation of methyl laurate,the Ni catalyst gave a complete hydrogenolysis of methyl laurate to CH4at 330°C and 3.0 MPa,while the presence of Ga promoted the HDO pathway and suppressed C–C bond hydrogenolysis and methanation.The Ni5Ga3 catalyst exhibited the best desired performance.Even at 400°C,it gave the yield of C11 and C12 hydrocarbons of ~99%,and the selectivity to CH4(SCH4) was only 2.4%.In the deoxygenation of methyl octanoate and methyl palmitate,the Ni5Ga3 catalyst also gave the yield of hydrocarbons above95%.Reactivity evaluation and methyl propionate-TPD and TPSR results indicate that the C–OCH3 bond instead of the O–CH3 one was cleaved on both Ni and bimetallic Ni–Ga catalysts.It is highlighted that methanol,derived from the C–OCH3 bond hydrogenolysis,mainly decomposed to CO and H2 on IMCs,while it was converted to methane on metallic Ni and alloy.It is of great significance that H2 could be yielded from the methyl ester itself.In short,the utilization of Ni–Ga IMCs can effectively reduce carbon loss and H2 consumption,all of which are ascribed to the geometric and electronic effects of Ga.
基金financial and moral support from the National Centre for Physics Islamabad,Pakistan to carry out of this present research workDeanship of Scientific Research at King Saud University for it’s funding of this research through the Research Group Project no RGP-VPP-345
文摘The non-edible oils are believed to be one of the major feedstock for the production of biodiesel in future.In the present study,we investigated the production of Jatropha oil methyl esters（JOMEs） via alkali-catalyzed transesterification route.The biophysical characteristics of Jatropha oil were found within the optimal range in accordance with ASTM standards as a substitute diesel fuel.The chemical composition and production yield of as-synthesized biodiesel were confirmed by various analytical techniques such as FT-IR,1H NMR,13 C NMR and gas chromatography coupled with mass spectrometry.A high percentage conversion,～96.09%,of fatty acids into esters was achieved under optimized transesterification conditions with 6 ：1 oil to methanol ratio and 0.9 wt% Na OH for 50 min at ～60°C.Moreover,twelve fatty acids methyl esters（FAME） were quantified in the GC/MS analysis and it was interesting to note that the mass fragmentation pattern of saturated,monounsaturated and diunsaturated FAME was comparable with the literature reported values.
