Based on the variation of discrete surface,a new grey relational analysis model,called the grey variation relational ana-lysis(GVRA)model,is proposed in this paper.Meanwhile,the proposed model avoids the inconsistent ...Based on the variation of discrete surface,a new grey relational analysis model,called the grey variation relational ana-lysis(GVRA)model,is proposed in this paper.Meanwhile,the proposed model avoids the inconsistent results caused by diffe-rent construction of discrete surface of panel data or the change in the order of indicators or objects in existing grey relational analysis models.Firstly,the submatrix of the sample matrix is given according to the permutation and combination theory.Secondly,the amplitude of the submatrix is calculated and the variation of discrete surface is obtained.Then,a grey relational coefficient is presented by variation difference,and the GVRA model is established.Furthermore,the properties of the pro-posed model,such as normality,symmetry,reflexivity,transla-tion invariant,and number multiplication invariant,are also veri-fied.Finally,the proposed model is used to identify the driving factors of haze in the cities along the Yellow River in Shandong Province,China.The result reveals that the proposed model can effectively measure the relationship between panel data.展开更多
Anti-jamming performance evaluation has recently received significant attention. For Link-16, the anti-jamming performance evaluation and selection of the optimal anti-jamming technologies are urgent problems to be so...Anti-jamming performance evaluation has recently received significant attention. For Link-16, the anti-jamming performance evaluation and selection of the optimal anti-jamming technologies are urgent problems to be solved. A comprehensive evaluation method is proposed, which combines grey relational analysis (GRA) and cloud model, to evaluate the anti-jamming performances of Link-16. Firstly, on the basis of establishing the anti-jamming performance evaluation indicator system of Link-16, the linear combination of analytic hierarchy process(AHP) and entropy weight method (EWM) are used to calculate the combined weight. Secondly, the qualitative and quantitative concept transformation model, i.e., the cloud model, is introduced to evaluate the anti-jamming abilities of Link-16 under each jamming scheme. In addition, GRA calculates the correlation degree between evaluation indicators and the anti-jamming performance of Link-16, and assesses the best anti-jamming technology. Finally, simulation results prove that the proposed evaluation model can achieve the objective of feasible and practical evaluation, which opens up a novel way for the research of anti-jamming performance evaluations of Link-16.展开更多
Background Cotton crop is infested by numerous arthropod pests from sowing to harvesting,causing substantial direct and indirect yield losses.Knowledge of seasonal population trends and the relative occurrence of pest...Background Cotton crop is infested by numerous arthropod pests from sowing to harvesting,causing substantial direct and indirect yield losses.Knowledge of seasonal population trends and the relative occurrence of pests and their natural enemies is required to minimize the pest population and yield losses.In the current study,analysis of the seasonal population trend of pests and natural enemies and their relative occurrence on cultivars of three cotton species in Central India has been carried out.Results A higher number and diversity of sucking pests were observed during the vegetative cotton growth stage(60 days after sowing),declining as the crop matured.With the exception of cotton jassid(Amrasca biguttula biguttula Ishida),which caused significant crop damage mainly from August to September;populations of other sucking insects seldom reached economic threshold levels(ETL)throughout the studied period.The bollworm complex populations were minimal,except for the pink bollworm(Pectinophora gossypiella Saunders),which re-emerged as a menace to cotton crops during the cotton cropping season 2017–2018 due to resistance development against Bt-cotton.A reasonably good number of predatory arthropods,including coccinellids,lacewings,and spiders,were found actively preying on the arthropod pest complex of the cotton crop during the early vegetative growth stage.Linear regression indicates a significant relationship between green boll infestations and pink bollworm moths in pheromone traps.Multiple linear regression analyse showed mean weekly weather at one-or two-week lag periods had a significant impact on sucking pest population(cotton aphid,cotton jassid,cotton whitefly,and onion thrips)fluctuation.Gossypium hirsutum cultivars RCH 2 and DCH 32,and G.barbadense cultivar Suvin were found susceptible to cotton jassid and onion thrips.Phule Dhanvantary,an G.arboreum cotton cultivar,demonstrated the highest tolerance among all evaluated cultivars against all sucking pests.Conclusion These findings have important implications for pest management in cotton crops.Susceptible cultivars warrant more attention for plant protection measures,making them more input-intensive.The choice of appropriate cultivars can help minimize input costs,thereby increasing net returns for cotton farmers.展开更多
As China enters a new stage of agricultural modernization,understanding how rural e-commerce can address the multidimensional relative poverty of farmers is of significant research importance.This research utilized da...As China enters a new stage of agricultural modernization,understanding how rural e-commerce can address the multidimensional relative poverty of farmers is of significant research importance.This research utilized data from China Household Finance Survey(CHFS)and China Statistical Yearbook to construct a multi-dimensional relative poverty index system and an evaluation index system for rural e-commerce development.A fixed-effect model was employed to test the direct impact,and an intermediary-effect model was used to analyze the mechanism.The study found that rural e-commerce effectively alleviated multidimensional relative poverty among farmers,with varying effects across different dimensions.Notably,improving digital payment levels and non-agricultural employment were effective means by which rural e-commerce mitigated this poverty.However,the impact of rural e-commerce showed regional heterogeneity.Based on these findings,this research offered a series of countermeasures and suggestions.展开更多
Grey relational analysis is an important part of the grey systems theory, and it is the basis of the grey clustering analysis, grey decision-making and grey controlling. To research whether grey relational models sati...Grey relational analysis is an important part of the grey systems theory, and it is the basis of the grey clustering analysis, grey decision-making and grey controlling. To research whether grey relational models satisfy the four grey relational theorems, several kinds of grey relational models are commented. Some problems including the properties of normality, pair symmetry and wholeness are discussed. The phenomenon that the lower value of almost each grey relational model is not equal to zero is proved. The contradiction problems between the properties of wholeness and pair symmetry are verified. Finally, several propositions are constructed to explain the above problems.展开更多
To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weap...To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weapon systems by combining grey relational analysis and TOPSIS is proposed. The model aggregates the grey relational grade and the distance to a new integrated closeness and reflects not only the trend but also the situation of the alternative. The example illuminates that the model is effective for the effectiveness evaluation of weapon systems.展开更多
An approach is proposed to solve the problem how to obtain the priorities from interval fuzzy preference relations. Firstly, another expression of interval numbers is given. Then, some basic definitions on consistency...An approach is proposed to solve the problem how to obtain the priorities from interval fuzzy preference relations. Firstly, another expression of interval numbers is given. Then, some basic definitions on consistency and weak transitivity of real and interval fuzzy preference relations are described. Based on these definitions, a two-phase process for determining the priorities from interval fuzzy preference relations is presented. Finally, two exam- ples are used to illustrate the use of the proposed approach.展开更多
For the gray attributes of the equipment program and its difficulty to carry out the quantitative assessment of the equipment program information, the gray relation projection method is simply reviewed. Combining the ...For the gray attributes of the equipment program and its difficulty to carry out the quantitative assessment of the equipment program information, the gray relation projection method is simply reviewed. Combining the super-data envelopment analysis（DEA） model and the gray system theory, a new super-DEA for measuring the weight is proposed, and a gray relation projection model is established to rank the equipment programs. Finally, this approach is used to evaluate the equipment program. The results are verified valid and can provide a new way for evaluating the equipment program.展开更多
Group decision making problems are investigated with uncertain multiplicative linguistic preference relations.An unbalanced multiplicative linguistic label set is introduced,which can be used by the experts to express...Group decision making problems are investigated with uncertain multiplicative linguistic preference relations.An unbalanced multiplicative linguistic label set is introduced,which can be used by the experts to express their linguistic preference information over alternatives.The uncertain linguistic weighted geometric mean operator is utilized to aggregate all the individual uncertain multiplicative linguistic preference relations into a collective one,and then a simple approach is developed to determine the experts＇ weights by utilizing the consensus degrees among the individual uncertain multiplicative linguistic preference relations and the collective uncertain multiplicative linguistic preference relations.Furthermore,a practical interactive procedure for group decision making is proposed based on uncertain multiplicative linguistic preference relations,in which a possibility degree formula and a complementary matrix are used to rank the given alternatives.Finally,the proposed procedure is applied to solve the group decision making problem of a manufacturing company searching the best global supplier for one of its most critical parts used in assembling process.展开更多
A proper weapon system is very important for a na- tional defense system. Generally, it means selecting the optimal weapon system among many alternatives, which is a multiple- attribute decision making （MADM） proble...A proper weapon system is very important for a na- tional defense system. Generally, it means selecting the optimal weapon system among many alternatives, which is a multiple- attribute decision making （MADM） problem. This paper proposes a new mathematical model based on the response surface method （RSM） and the grey relational analysis （GRA）. RSM is used to obtain the experimental points and analyze the factors that have a significant impact on the selection results. GRA is used to an- alyze the trend relationship between alternatives and reference series. And then an RSM model is obtained, which can be used to calculate all alternatives and obtain ranking results. A real world application is introduced to illustrate the utilization of the model for the weapon selection problem. The results show that this model can be used to help decision-makers to make a quick comparison of alternatives and select a proper weapon system from multiple alternatives, which is an effective and adaptable method for solving the weapon system selection problem.展开更多
There are abundant Bajocian—Tithonian bivalves in the main ridge of the Tanggula Mountains of northern Qinghai—Xizang Plateau, China. After figuring the common and coeval species between Tanggula and other areas (Fi...There are abundant Bajocian—Tithonian bivalves in the main ridge of the Tanggula Mountains of northern Qinghai—Xizang Plateau, China. After figuring the common and coeval species between Tanggula and other areas (Fig. 1), and tracing the temporal and spacial historical distribution of the bivalves very capable of dispersion, some Jurassic bivalve biogeographic items, particularly the biogeographic relations, have been lit up. In the known 21 taxa of the Jurassic Pectinoida and Ostreoida from the main ridge of the Tanggula Mountains, there are 12 (57%) common and coeval species in northern Tethys, 13 (62%) common and coeval species in southern Tethys and 12 (57%) in Kachchh—southern Xizang area. It has demonstrated that there existed intermigration of bivalves between Tanggula and various parts of Tethys. Although there is no coeval species between Tanggula and western Australia, in these two areas there exist 6 (29%) close range common species of which 4 (19%) coevaity existed in western Australia and India Plate. Tanggula fauna is, therefore, still very close to that of western Australia. However, there are 15 (71%) common and 14 (67%) coevality species between the main ridge of the Tanggula Mountains and northwestern Europe, among the common species, 8 (38%) ones have lower limitation (first occurrence) in northwestern Europe but only 2 (10%) taxa are older in the main ridge of the Tanggula Mountains. It is very clear that pectinite and ostrea fauna of Tethys, particularly the main ridge of the Tanggula Mountains and Europe had very close relation and most Tanggula’s or northern Tethyan taxa migrated from northwestern Europe.展开更多
This study aims to optimize the input parameters such as mass fraction and particle size of SiC along with depth of cut,feed and cutting speed in the milling of Al5059/SiC/MoS2.The hybrid metal matrix composites are g...This study aims to optimize the input parameters such as mass fraction and particle size of SiC along with depth of cut,feed and cutting speed in the milling of Al5059/SiC/MoS2.The hybrid metal matrix composites are generally fabricated by reinforcing of different sizes(10,20,40 μm)of SiC with aluminium at a different levels(5%,10%& 15%)whereas the MoS2 addition is fixed as 2%.The effect of each control factor on response variables are analyzed through Taguchi S/N ratio method.Also,the most significant method for prediction of response parameters is satisfied by ANN model than the regression model.Analysis of variance(ANOVA)results envisage that mass fraction of SiC,feed rate is the most domineering factor on response variable.展开更多
In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support...In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support provided by wartime military material support powers can be more effective. When the principles,requirements, influencing factors and goals of military material support forces are deployed in wartime, an evaluation indicator system is established. Thus, a new combined empowerment method based on an analytic hierarchy process（AHP） is developed to calculate the subjective weights, and the rough entropy method is used to calculate the objective weights. Combination weights can be obtained by calculating the weight preference coefficient error, which is determined by combining the cooperative game method and the minimum deviation into objectives. This approach can determine the grey relation projection coefficient and synthesize the measure scheme superiority to finally optimize the deployment plan using the grey relation projection decision-making method. The results show that the method is feasible and effective;it can provide a more scientific and practical decision-making basis for the military material support power deployment in wartime.展开更多
As for the factors affecting the heat transfer performance of complex and nonlinear oscillating heat pipe (OHP),grey relational analysis (GRA) was used to deal with the relationship between heat transfer rate of a loo...As for the factors affecting the heat transfer performance of complex and nonlinear oscillating heat pipe (OHP),grey relational analysis (GRA) was used to deal with the relationship between heat transfer rate of a looped copper-water OHP and charging ratio,inner diameter,inclination angel,heat input,number of turns,and the main influencing factors were defined.Then,forecasting model was obtained by using main influencing factors (such as charging ratio,interior diameter,and inclination angel) as the inputs of function chain neural network.The results show that the relative average error between the predicted and actual value is 4%,which illustrates that the function chain neural network can be applied to predict the performance of OHP accurately.展开更多
The group decision making problem with linguistic pref- erence relations is studied. The concept of additive consistent linguistic preference relation is defined, and then some properties of the additive consistent li...The group decision making problem with linguistic pref- erence relations is studied. The concept of additive consistent linguistic preference relation is defined, and then some properties of the additive consistent linguistic preference relation are studied. In order to rank the alternatives in the group decision making with the linguistic preference relations, the weighted average is first utilized to combine the group linguistic preference relations to one linguistic preference relation, and then the transformation function is proposed to transform the linguistic preference relation to the multiplicative preference relation, and thus the Saaty＇s eigenvec- tor method （EM） of multiplicative preference relation is utilized to rank the alternatives in group decision making with the linguistic preference relations. Finally, an illustrative numerical example is given to verify the proposed method. A comparative study to the linguistic ordered weighted averaging （LOWA） operator method is also demonstrated.展开更多
In order to enhance catalytic combustion efficiency, a premixed hydrogen /air combustion model of the micro turbine engine is established under different excess air ratio, inlet velocity and heat transfer coefficient....In order to enhance catalytic combustion efficiency, a premixed hydrogen /air combustion model of the micro turbine engine is established under different excess air ratio, inlet velocity and heat transfer coefficient. And effects of inlet velocity, excess air coefficient and heat transfer coefficient on the catalytic combustion efficiency of the hydrogen have been analyzed by the FLUENT with CHEMKIN reaction mechanisms and the fuzzy grey relation theory. It is showed that inlet velocity has a more intuitive influence on the catalytic combustion efficiency of the hydrogen. A higher efficiency can be obtained with a lower inlet velocity. The optimum excess air coefficient is in the range of 0.94 to 1.0, the catalytic combustion efficiency of the hydrogen will be declined if the excess air coefficient exceeded 1.0. The effect of heat transfer coefficient on the catalytic combustion efficiency of the hydrogen mainly embodies in the case of the excess air coefficient exceeded 1.0, however, the effect will be declined if the heat transfer coefficient exceeded 4.0. The fuzzy grey relation degrees of the inlet velocity, heat transfer coefficient and excess air coefficient on the catalytic combustion efficiency of the hydrogen are 0.640945, 0.633214 and 0.547892 respectively.展开更多
In this paper, the general calculation formulas of radial matrix elements for relativistic n-dimensional hydrogen atom of spin S=0 are obtained, and the recurrence relation of different power order radial matrix eleme...In this paper, the general calculation formulas of radial matrix elements for relativistic n-dimensional hydrogen atom of spin S=0 are obtained, and the recurrence relation of different power order radial matrix elements are also derived.展开更多
This study aims to reflect the information coverage grey number and the interaction between attributes in grey relational decision making. Therefore, a multi-attribute decision method based on the grey information cov...This study aims to reflect the information coverage grey number and the interaction between attributes in grey relational decision making. Therefore, a multi-attribute decision method based on the grey information coverage interaction relational degree(GIRD) is proposed. Firstly, this paper defines the information coverage grey number, and establishes the GIRD model by using the Choquet fuzzy integral and grey relational principle. It proves that the proposed model not only is the general and unified form of the point relational degree, interval relational degree, mixed relational degree and grey fuzzy integral relational degree, but also can effectively deal with the interaction between attributes. Further,a decision making example of evaluating the industrial operation quality for 14 cities in Hunan province of China is provided to highlight the implementation, availability, and feasibility of the proposed decision model.展开更多
This study aims to examine the usability of environmentally harmless vegetable oil in the minimum quantity of lubrication(MQL)system in face milling of AISI O2 steel and to optimize the cutting parameters by different...This study aims to examine the usability of environmentally harmless vegetable oil in the minimum quantity of lubrication(MQL)system in face milling of AISI O2 steel and to optimize the cutting parameters by different statistical methods.Vegetable oil was preferred as cutting fluid,and Taguchi method was used in the preparation of the test pattern.After testing with the prepared test pattern,cutting performance in all parameters has been improved according to dry conditions thanks to the MQL system.The highest tool life was obtained by using cutting parameters of 7.5 m cutting length,100 m/min cutting speed,100 mL/h MQL flow rate and 0.1 mm/tooth feed rate.Optimum cutting parameters were determined according to the Taguchi analysis,and the obtained parameters were confirmed with the verification tests.In addition,the optimum test parameter was determined by applying the gray relational analysis method.After using ANOVA analysis according to the measured surface roughness and cutting force values,the most effective cutting parameter was observed to be the feed rate.In addition,the models for surface roughness and cutting force values were obtained with precisions of 99.63%and 99.68%,respectively.Effective wear mechanisms were found to be abrasion and adhesion.展开更多
基金supported by the National Natural Science Foundation of China(72271124,72071111)Shandong Natural Science Foundation(ZR2023MG070)the Social Science Planning Project of Shandong Province(23CGLJ03,21CTJJ01).
文摘Based on the variation of discrete surface,a new grey relational analysis model,called the grey variation relational ana-lysis(GVRA)model,is proposed in this paper.Meanwhile,the proposed model avoids the inconsistent results caused by diffe-rent construction of discrete surface of panel data or the change in the order of indicators or objects in existing grey relational analysis models.Firstly,the submatrix of the sample matrix is given according to the permutation and combination theory.Secondly,the amplitude of the submatrix is calculated and the variation of discrete surface is obtained.Then,a grey relational coefficient is presented by variation difference,and the GVRA model is established.Furthermore,the properties of the pro-posed model,such as normality,symmetry,reflexivity,transla-tion invariant,and number multiplication invariant,are also veri-fied.Finally,the proposed model is used to identify the driving factors of haze in the cities along the Yellow River in Shandong Province,China.The result reveals that the proposed model can effectively measure the relationship between panel data.
基金Heilongjiang Provincial Natural Science Foundation of China (LH2021F009)。
文摘Anti-jamming performance evaluation has recently received significant attention. For Link-16, the anti-jamming performance evaluation and selection of the optimal anti-jamming technologies are urgent problems to be solved. A comprehensive evaluation method is proposed, which combines grey relational analysis (GRA) and cloud model, to evaluate the anti-jamming performances of Link-16. Firstly, on the basis of establishing the anti-jamming performance evaluation indicator system of Link-16, the linear combination of analytic hierarchy process(AHP) and entropy weight method (EWM) are used to calculate the combined weight. Secondly, the qualitative and quantitative concept transformation model, i.e., the cloud model, is introduced to evaluate the anti-jamming abilities of Link-16 under each jamming scheme. In addition, GRA calculates the correlation degree between evaluation indicators and the anti-jamming performance of Link-16, and assesses the best anti-jamming technology. Finally, simulation results prove that the proposed evaluation model can achieve the objective of feasible and practical evaluation, which opens up a novel way for the research of anti-jamming performance evaluations of Link-16.
基金Funding support for the Crop Pest Surveillance and Advisory Project(CROPSAP)。
文摘Background Cotton crop is infested by numerous arthropod pests from sowing to harvesting,causing substantial direct and indirect yield losses.Knowledge of seasonal population trends and the relative occurrence of pests and their natural enemies is required to minimize the pest population and yield losses.In the current study,analysis of the seasonal population trend of pests and natural enemies and their relative occurrence on cultivars of three cotton species in Central India has been carried out.Results A higher number and diversity of sucking pests were observed during the vegetative cotton growth stage(60 days after sowing),declining as the crop matured.With the exception of cotton jassid(Amrasca biguttula biguttula Ishida),which caused significant crop damage mainly from August to September;populations of other sucking insects seldom reached economic threshold levels(ETL)throughout the studied period.The bollworm complex populations were minimal,except for the pink bollworm(Pectinophora gossypiella Saunders),which re-emerged as a menace to cotton crops during the cotton cropping season 2017–2018 due to resistance development against Bt-cotton.A reasonably good number of predatory arthropods,including coccinellids,lacewings,and spiders,were found actively preying on the arthropod pest complex of the cotton crop during the early vegetative growth stage.Linear regression indicates a significant relationship between green boll infestations and pink bollworm moths in pheromone traps.Multiple linear regression analyse showed mean weekly weather at one-or two-week lag periods had a significant impact on sucking pest population(cotton aphid,cotton jassid,cotton whitefly,and onion thrips)fluctuation.Gossypium hirsutum cultivars RCH 2 and DCH 32,and G.barbadense cultivar Suvin were found susceptible to cotton jassid and onion thrips.Phule Dhanvantary,an G.arboreum cotton cultivar,demonstrated the highest tolerance among all evaluated cultivars against all sucking pests.Conclusion These findings have important implications for pest management in cotton crops.Susceptible cultivars warrant more attention for plant protection measures,making them more input-intensive.The choice of appropriate cultivars can help minimize input costs,thereby increasing net returns for cotton farmers.
基金Supported by General Project of the National Social Science Foundation(Topic 20BJY135)。
文摘As China enters a new stage of agricultural modernization,understanding how rural e-commerce can address the multidimensional relative poverty of farmers is of significant research importance.This research utilized data from China Household Finance Survey(CHFS)and China Statistical Yearbook to construct a multi-dimensional relative poverty index system and an evaluation index system for rural e-commerce development.A fixed-effect model was employed to test the direct impact,and an intermediary-effect model was used to analyze the mechanism.The study found that rural e-commerce effectively alleviated multidimensional relative poverty among farmers,with varying effects across different dimensions.Notably,improving digital payment levels and non-agricultural employment were effective means by which rural e-commerce mitigated this poverty.However,the impact of rural e-commerce showed regional heterogeneity.Based on these findings,this research offered a series of countermeasures and suggestions.
基金supported partly by the National Natural Science Foundation of China (70701017) the Philosophy and Social Sciences Foundation of Nanjing University of Astronautics and Aeronautics (V0865-091).
文摘Grey relational analysis is an important part of the grey systems theory, and it is the basis of the grey clustering analysis, grey decision-making and grey controlling. To research whether grey relational models satisfy the four grey relational theorems, several kinds of grey relational models are commented. Some problems including the properties of normality, pair symmetry and wholeness are discussed. The phenomenon that the lower value of almost each grey relational model is not equal to zero is proved. The contradiction problems between the properties of wholeness and pair symmetry are verified. Finally, several propositions are constructed to explain the above problems.
文摘To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weapon systems by combining grey relational analysis and TOPSIS is proposed. The model aggregates the grey relational grade and the distance to a new integrated closeness and reflects not only the trend but also the situation of the alternative. The example illuminates that the model is effective for the effectiveness evaluation of weapon systems.
基金supported by the National Natural Science Foundation for Excellent Innovation Research Group of China (70721001)the National Natural Science Foundation of China (90924016)Fundamental Research Fund for Northeastern University (N090606001)
文摘An approach is proposed to solve the problem how to obtain the priorities from interval fuzzy preference relations. Firstly, another expression of interval numbers is given. Then, some basic definitions on consistency and weak transitivity of real and interval fuzzy preference relations are described. Based on these definitions, a two-phase process for determining the priorities from interval fuzzy preference relations is presented. Finally, two exam- ples are used to illustrate the use of the proposed approach.
基金supported by the National Natural Science Foundation of China(7107307971222106+2 种基金70901069)the Research Foundation of the National Excellent Doctoral Dissertation of Chinathe Research Fund for the Doctoral Program of Higher Education(20133402110028)
文摘For the gray attributes of the equipment program and its difficulty to carry out the quantitative assessment of the equipment program information, the gray relation projection method is simply reviewed. Combining the super-data envelopment analysis（DEA） model and the gray system theory, a new super-DEA for measuring the weight is proposed, and a gray relation projection model is established to rank the equipment programs. Finally, this approach is used to evaluate the equipment program. The results are verified valid and can provide a new way for evaluating the equipment program.
基金supported by the National Natural Science Foundation of China (70571087)the National Science Fund for Distinguished Young Scholars of China (70625005)
文摘Group decision making problems are investigated with uncertain multiplicative linguistic preference relations.An unbalanced multiplicative linguistic label set is introduced,which can be used by the experts to express their linguistic preference information over alternatives.The uncertain linguistic weighted geometric mean operator is utilized to aggregate all the individual uncertain multiplicative linguistic preference relations into a collective one,and then a simple approach is developed to determine the experts＇ weights by utilizing the consensus degrees among the individual uncertain multiplicative linguistic preference relations and the collective uncertain multiplicative linguistic preference relations.Furthermore,a practical interactive procedure for group decision making is proposed based on uncertain multiplicative linguistic preference relations,in which a possibility degree formula and a complementary matrix are used to rank the given alternatives.Finally,the proposed procedure is applied to solve the group decision making problem of a manufacturing company searching the best global supplier for one of its most critical parts used in assembling process.
基金supported by the National Natural Science Foundation of China(51375389)
文摘A proper weapon system is very important for a na- tional defense system. Generally, it means selecting the optimal weapon system among many alternatives, which is a multiple- attribute decision making （MADM） problem. This paper proposes a new mathematical model based on the response surface method （RSM） and the grey relational analysis （GRA）. RSM is used to obtain the experimental points and analyze the factors that have a significant impact on the selection results. GRA is used to an- alyze the trend relationship between alternatives and reference series. And then an RSM model is obtained, which can be used to calculate all alternatives and obtain ranking results. A real world application is introduced to illustrate the utilization of the model for the weapon selection problem. The results show that this model can be used to help decision-makers to make a quick comparison of alternatives and select a proper weapon system from multiple alternatives, which is an effective and adaptable method for solving the weapon system selection problem.
文摘There are abundant Bajocian—Tithonian bivalves in the main ridge of the Tanggula Mountains of northern Qinghai—Xizang Plateau, China. After figuring the common and coeval species between Tanggula and other areas (Fig. 1), and tracing the temporal and spacial historical distribution of the bivalves very capable of dispersion, some Jurassic bivalve biogeographic items, particularly the biogeographic relations, have been lit up. In the known 21 taxa of the Jurassic Pectinoida and Ostreoida from the main ridge of the Tanggula Mountains, there are 12 (57%) common and coeval species in northern Tethys, 13 (62%) common and coeval species in southern Tethys and 12 (57%) in Kachchh—southern Xizang area. It has demonstrated that there existed intermigration of bivalves between Tanggula and various parts of Tethys. Although there is no coeval species between Tanggula and western Australia, in these two areas there exist 6 (29%) close range common species of which 4 (19%) coevaity existed in western Australia and India Plate. Tanggula fauna is, therefore, still very close to that of western Australia. However, there are 15 (71%) common and 14 (67%) coevality species between the main ridge of the Tanggula Mountains and northwestern Europe, among the common species, 8 (38%) ones have lower limitation (first occurrence) in northwestern Europe but only 2 (10%) taxa are older in the main ridge of the Tanggula Mountains. It is very clear that pectinite and ostrea fauna of Tethys, particularly the main ridge of the Tanggula Mountains and Europe had very close relation and most Tanggula’s or northern Tethyan taxa migrated from northwestern Europe.
文摘This study aims to optimize the input parameters such as mass fraction and particle size of SiC along with depth of cut,feed and cutting speed in the milling of Al5059/SiC/MoS2.The hybrid metal matrix composites are generally fabricated by reinforcing of different sizes(10,20,40 μm)of SiC with aluminium at a different levels(5%,10%& 15%)whereas the MoS2 addition is fixed as 2%.The effect of each control factor on response variables are analyzed through Taguchi S/N ratio method.Also,the most significant method for prediction of response parameters is satisfied by ANN model than the regression model.Analysis of variance(ANOVA)results envisage that mass fraction of SiC,feed rate is the most domineering factor on response variable.
基金supported by the Education Science Fund of the Military Science Institute of Beijing,China(2015JY320)
文摘In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support provided by wartime military material support powers can be more effective. When the principles,requirements, influencing factors and goals of military material support forces are deployed in wartime, an evaluation indicator system is established. Thus, a new combined empowerment method based on an analytic hierarchy process（AHP） is developed to calculate the subjective weights, and the rough entropy method is used to calculate the objective weights. Combination weights can be obtained by calculating the weight preference coefficient error, which is determined by combining the cooperative game method and the minimum deviation into objectives. This approach can determine the grey relation projection coefficient and synthesize the measure scheme superiority to finally optimize the deployment plan using the grey relation projection decision-making method. The results show that the method is feasible and effective;it can provide a more scientific and practical decision-making basis for the military material support power deployment in wartime.
基金Project(531107040300) supported by the Fundamental Research Funds for the Central Universities in ChinaProject(2006BAJ04B04) supported by the National Science and Technology Pillar Program during the Eleventh Five-year Plan Period of China
文摘As for the factors affecting the heat transfer performance of complex and nonlinear oscillating heat pipe (OHP),grey relational analysis (GRA) was used to deal with the relationship between heat transfer rate of a looped copper-water OHP and charging ratio,inner diameter,inclination angel,heat input,number of turns,and the main influencing factors were defined.Then,forecasting model was obtained by using main influencing factors (such as charging ratio,interior diameter,and inclination angel) as the inputs of function chain neural network.The results show that the relative average error between the predicted and actual value is 4%,which illustrates that the function chain neural network can be applied to predict the performance of OHP accurately.
基金supported by the National Natural Science Foundation of China(70771025)Hohai University Central University Special Fund Basic Scientific Research and Operational Costs
文摘The group decision making problem with linguistic pref- erence relations is studied. The concept of additive consistent linguistic preference relation is defined, and then some properties of the additive consistent linguistic preference relation are studied. In order to rank the alternatives in the group decision making with the linguistic preference relations, the weighted average is first utilized to combine the group linguistic preference relations to one linguistic preference relation, and then the transformation function is proposed to transform the linguistic preference relation to the multiplicative preference relation, and thus the Saaty＇s eigenvec- tor method （EM） of multiplicative preference relation is utilized to rank the alternatives in group decision making with the linguistic preference relations. Finally, an illustrative numerical example is given to verify the proposed method. A comparative study to the linguistic ordered weighted averaging （LOWA） operator method is also demonstrated.
基金Project(51776062) supported by the National Natural Science Foundation of ChinaProject(201208430262) supported by the National Studying Abroad Foundation Project of the China Scholarship Council
文摘In order to enhance catalytic combustion efficiency, a premixed hydrogen /air combustion model of the micro turbine engine is established under different excess air ratio, inlet velocity and heat transfer coefficient. And effects of inlet velocity, excess air coefficient and heat transfer coefficient on the catalytic combustion efficiency of the hydrogen have been analyzed by the FLUENT with CHEMKIN reaction mechanisms and the fuzzy grey relation theory. It is showed that inlet velocity has a more intuitive influence on the catalytic combustion efficiency of the hydrogen. A higher efficiency can be obtained with a lower inlet velocity. The optimum excess air coefficient is in the range of 0.94 to 1.0, the catalytic combustion efficiency of the hydrogen will be declined if the excess air coefficient exceeded 1.0. The effect of heat transfer coefficient on the catalytic combustion efficiency of the hydrogen mainly embodies in the case of the excess air coefficient exceeded 1.0, however, the effect will be declined if the heat transfer coefficient exceeded 4.0. The fuzzy grey relation degrees of the inlet velocity, heat transfer coefficient and excess air coefficient on the catalytic combustion efficiency of the hydrogen are 0.640945, 0.633214 and 0.547892 respectively.
文摘In this paper, the general calculation formulas of radial matrix elements for relativistic n-dimensional hydrogen atom of spin S=0 are obtained, and the recurrence relation of different power order radial matrix elements are also derived.
基金supported by the National Natural Science Foundation of China(71871174,71571065,71671135)the National Social Science Fund of China(13FGL005)。
文摘This study aims to reflect the information coverage grey number and the interaction between attributes in grey relational decision making. Therefore, a multi-attribute decision method based on the grey information coverage interaction relational degree(GIRD) is proposed. Firstly, this paper defines the information coverage grey number, and establishes the GIRD model by using the Choquet fuzzy integral and grey relational principle. It proves that the proposed model not only is the general and unified form of the point relational degree, interval relational degree, mixed relational degree and grey fuzzy integral relational degree, but also can effectively deal with the interaction between attributes. Further,a decision making example of evaluating the industrial operation quality for 14 cities in Hunan province of China is provided to highlight the implementation, availability, and feasibility of the proposed decision model.
文摘This study aims to examine the usability of environmentally harmless vegetable oil in the minimum quantity of lubrication(MQL)system in face milling of AISI O2 steel and to optimize the cutting parameters by different statistical methods.Vegetable oil was preferred as cutting fluid,and Taguchi method was used in the preparation of the test pattern.After testing with the prepared test pattern,cutting performance in all parameters has been improved according to dry conditions thanks to the MQL system.The highest tool life was obtained by using cutting parameters of 7.5 m cutting length,100 m/min cutting speed,100 mL/h MQL flow rate and 0.1 mm/tooth feed rate.Optimum cutting parameters were determined according to the Taguchi analysis,and the obtained parameters were confirmed with the verification tests.In addition,the optimum test parameter was determined by applying the gray relational analysis method.After using ANOVA analysis according to the measured surface roughness and cutting force values,the most effective cutting parameter was observed to be the feed rate.In addition,the models for surface roughness and cutting force values were obtained with precisions of 99.63%and 99.68%,respectively.Effective wear mechanisms were found to be abrasion and adhesion.
