By simplifying catalyst-product separation and reducing phosphorus waste,heterogeneous hydroformylation offers a more sustainable alternative to homogeneous processes.However,heterogeneous hydroformylation catalysts d...By simplifying catalyst-product separation and reducing phosphorus waste,heterogeneous hydroformylation offers a more sustainable alternative to homogeneous processes.However,heterogeneous hydroformylation catalysts developed thus far still suffer from the issues of much lower activity and metal leaching,which severely hinder their practical application.Here,we demonstrate that incorporating phosphorus(P)atoms into graphitic carbon nitride(PCN)supports facilitates charge transfer from Rh to the PCN support,thus largely enhancing electronic metal-support interactions(EMSIs).In the styrene hydroformylation reaction,the activity of Rh_(1)/PCN single-atom catalysts(SACs)with varying P contents exhibited a volcano-shaped relationship with P doping,where the Rh_(1)/PCN SAC with optimal P doping showed exceptional activity,approximately 5.8-and 3.3-fold greater than that of the Rh_(1)/g-C_(3)N_(4)SAC without P doping and the industrial homogeneous catalyst HRh(CO)(PPh_(3))_(3),respectively.In addition,the optimal Rh_(1)/PCN SAC catalyst also demonstrated largely enhanced multicycle stability without any visible metal aggregation owing to the increased EMSIs,which sharply differed from the severe metal aggregation of large nanoparticles on the Rh_(1)/g-C_(3)N_(4)SAC.Mechan-istic studies revealed that the enhanced catalytic performance could be attributed to electron-deficient Rh species,which reduced CO adsorption while simultaneously promoting alkene adsorption through increased EMSIs.These findings suggest that tuning EMSIs is an effective way to achieve SACs with high activity and durability.展开更多
With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Ni...With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.展开更多
The seminal report ofα-diimine palladium and nickel catalysts in 1995 represented a major breakthrough in the preparation of functionalized polyolefin materials.Owing to the high abundance and low cost of nickel,nick...The seminal report ofα-diimine palladium and nickel catalysts in 1995 represented a major breakthrough in the preparation of functionalized polyolefin materials.Owing to the high abundance and low cost of nickel,nickel-based catalysts have great application prospects in the industrialization process of olefin coordination polymerization.In this work,various N-aryl substituents with different electronic effects were synthesized and introduced intoα-diimine ligands.The aspreparedα-diimine nickel catalysts showed high polymerization activity(0.9×10^(7)–3.0×10^(7)g·mol^(−1)·h^(−1))in ethylene polymerization,generating polyethylene products with adjustable molecular weights(Mn values:7.4×10^(4)–146.9×10^(4)g·mol^(−1))and branching densities(31/1000 C–68/1000 C).The resulting polyethylene products showed excellent mechanical properties,with high tensile strength(up to 25.0 MPa)and high strain at break values(up to 3890%).The copolymerization of ethylene and polar monomers can also be achieved by these nicekel complexes,ultimately preparing functionalized polyolefins.展开更多
Ice-going ships play a crucial role in polar transportation and resource extraction.Different from the existing modeling approach which assumes that ships remain stationary,dynamic overset grid technology and DFBI(Dyn...Ice-going ships play a crucial role in polar transportation and resource extraction.Different from the existing modeling approach which assumes that ships remain stationary,dynamic overset grid technology and DFBI(Dynamic Fluid-Body Interaction)method are employed in this paper to enable the free-running motion of the ship in modeling.A numerical model capable of simulating a ship navigating through pack ice area is proposed,which uses Computational Fluid Dynamics(CFD)method to solve the flow field and applies the Discrete Element Method(DEM)to simulate ship-ice and ice-ice interactions.Besides,the proposed high-precision method for generating pack ice area can be used in conjunction with the proposed numerical model.By comparing the numerical results with the available model test data and experimental observations,the effectiveness of the numerical model is validated,demonstrating its strong capability of predicting resistance and simulating ship navigation in pack ice,as well as its significant potential and applicability for further studies.展开更多
Verticillium wilt,caused by the infamous pathogen Verticillium dahliae,presents a primary constraint on cotton cul-tivation worldwide.The complexity of disease resistance in cotton and the largely unexplored interacti...Verticillium wilt,caused by the infamous pathogen Verticillium dahliae,presents a primary constraint on cotton cul-tivation worldwide.The complexity of disease resistance in cotton and the largely unexplored interaction dynamics between the cotton plant host and V.dahliae pathogen pose a crucial predicament for effectively managing cotton Verticillium wilt.Nevertheless,the most cost-effective approach to controlling this disease involves breeding and cul-tivating resistant cotton varieties,demanding a meticulous analysis of the mechanisms underlying cotton’s resistance to Verticillium wilt and the identification of pivotal genes.These aspects constitute focal points in disease-resistance breeding programs.In this review,we comprehensively discuss genetic inheritance associated with Verticillium wilt resistance in cotton,the advancements in molecular markers for disease resistance,the functional investiga-tion of resistance genes in cotton,the analysis of pathogenicity genes in V.dahliae,as well as the intricate interplay between cotton and this fungus.Moreover,we delve into the future prospects of cutting-edge research on cotton Verticillium wilt,aiming to proffer valuable insights for the effective management of this devastating fungus.展开更多
Spin-orbit optical phenomena pertain to the wider class of electromagnetic effects originating from the interaction of the photon spin with the spatial structure and propagation characteristics of an optical wave,medi...Spin-orbit optical phenomena pertain to the wider class of electromagnetic effects originating from the interaction of the photon spin with the spatial structure and propagation characteristics of an optical wave,mediated by suitable optical media.There are many emerging photonic applications of spin-orbit interactions(SOI)of light,such as control of the optical wave propagation via the spin,enhanced optical manipulation,and generation of structured optical fields.Unfortunately,current applications are based on symmetric SOI,that is,the behaviours of polarized photons with two opposite spins are opposite,leading to the limit of spin-based multiplexers.The symmetry of SOI can be broken in our proposed metasurfaces,consisting of spatially varying birefringence,which can arbitrarily and independently build SOI for two opposite spins without reduction of optical energy usage.We obtain three kinds of dual-functional metasurfaces at visible and infrared wavelengths with high efficiency.Our concept of generation of asymmetric SOI for two spins,using anisotropic metasurfaces,will open new degrees of freedoms for building new types of spin-controlled multifunctional shared-aperture devices for the generation of complex structured optical fields.展开更多
Taking into consideration the gas compressibility and chemical reaction reversibility, a model was developed to study the interactions between gas flow and chemical reaction in porous media and resolved by the finite ...Taking into consideration the gas compressibility and chemical reaction reversibility, a model was developed to study the interactions between gas flow and chemical reaction in porous media and resolved by the finite volume method on the basis of the gas-solid reaction aA(g)+bB(s)cC(g)+dD(s).The numerical analysis shows that the equilibrium constant is an important factor influencing the process of gas-solid reaction. The stoichiometric coefficients, molar masses of reactant gas, product gas and inert gas are the main factors influencing the density of gas mixture. The equilibrium constant influences the gas flow in porous media obviously when the stoichiometric coefficients satisfy a/c≠1.展开更多
In order to implement cost-effective machining of gr anite materials with diamond impregnated tools, we should realize low tool w ear, low energy consumption, and high cutting efficiency, while the accuracy of the wor...In order to implement cost-effective machining of gr anite materials with diamond impregnated tools, we should realize low tool w ear, low energy consumption, and high cutting efficiency, while the accuracy of the workpiece surfaces are maintained to be satisfactory. It is understood that the main factors affecting the tool wear, the energy, and the efficiency during the machining process are related to the tribological interactions that occur at the interface between the diamond tool surface and the workpiece. Based on this consideration, we propose a new machining method to machine granite materia ls to achieve improved cost effectiveness. In the proposed method, the tribologi cal interactions are maintained to a minimum. Based on the analyses of the experimental results, the following conclusions can be drawn: The wear performance is greatly dependent on the machining parameters and their combination. Therefore, optimum machining parameters must be set up at first in order to optimize the tribological characteristics of segments and thereby sawbl ade performance. These may be realized by balancing the energy expended by frict ion and the mechanical load on diamond crystal. The geometry and structure of diamond segments are another important criterion f or the diamond saw blade. Using a seven-layer structure for multi-blades sawin g and applying segments with side slots for trimming application had greatly red uced the frictions in the sawing processes. The wetting and bonding between diamonds and matrix alloys have been considered as the prerequisite for high wear performance of the segments. Diamonds coated w ith Ti-Cr alloy by a unique technique can effectively improve its wetting c apability and provide more storage space for debris, thereby reducing friction i nteractions.展开更多
The hydration film on particle surface plays an important role in bubble-particle adhesion in mineral flotation process. The thicknesses of the hydration films on natural hydrophobic coal and hydrophilic mica surfaces...The hydration film on particle surface plays an important role in bubble-particle adhesion in mineral flotation process. The thicknesses of the hydration films on natural hydrophobic coal and hydrophilic mica surfaces were measured directly by atomic force microscopy (AFM) based on the bending mode of the nominal constant compliance regime in AFM force curve in the present study. Surface and solid-liquid interfacial energies were calculated to explain the forming mechanism of the hydration film and atomic force microscopy data. The results show that there are significant differences in the structure and thickness of hydration films on coal and mica surfaces. Hydration film formed on mica surface with the thickness of 22.5 nm. In contrast, the bend was not detected in the nominal constant compliance regime. The van der Waals and polar interactions between both mica and coal and water molecules are characterized by an attractive effect, while the polar attractive free energy between water and mica (-87.36 mN/m) is significantly larger than that between water and coal (-32.89 mN/m), which leads to a thicker and firmer hydration layer on the mica surface. The interfacial interaction free energy of the coal/water/bubble is greater than that of mica. The polar attractive force is large enough to overcome the repulsive van der Waals force and the low energy barrier of film rupture, achieving coal particle bubble adhesion with a total interfacial free energy of-56.30 mN/m.展开更多
An in-depth analysis on the cooperativity of intermolecular interactions including hydrogen bonding andπ-π stacking in 1,3,5-triamino-2,4,6-trinitrobenzene(TATB) crystal was studied. Two quantities, cooperativity ra...An in-depth analysis on the cooperativity of intermolecular interactions including hydrogen bonding andπ-π stacking in 1,3,5-triamino-2,4,6-trinitrobenzene(TATB) crystal was studied. Two quantities, cooperativity rate and energy, were defined to evaluate the nature and strength of cooperativity in a series of clusters diverging from 1D to 3D prototypes. The origin and mechanism of the cooperative effect were settled to demonstrate that the nature of cooperativity is determined by whether the non-covalent interactions compete or promote with each other, which is manifested by the changing trend of electron transfer. There exists obvious cooperative effect in intra-layer and inter-layer structures as they own the equivalent non-covalent interactions, while anti-cooperative effect is also observed if two interactions correlate with each other. On the whole, in the process of crystal formation, the apparent cooperativity is the check and balance of the two effects, which is capable to support a global interaction among all of molecules and contribute to the stabilization of system. Based on the results, one may get a new insight to understand the relationship between non-covalent interactions and low impact sensitivity.展开更多
The finite element method was used to solve fluid dynamic interaction problems between the crust and mantle of the Earth. To consider different mechanical behaviours, the lithosphere consisting of the crust and upper ...The finite element method was used to solve fluid dynamic interaction problems between the crust and mantle of the Earth. To consider different mechanical behaviours, the lithosphere consisting of the crust and upper mantle was simulated as fluid-saturated porous rocks, while the upper aesthenospheric part of the mantle was simulated as viscous fluids. Since the whole lithosphere was computationally simulated, the dynamic interaction between the crust and the upper mantle was appropriately considered. In particular, the mixing of mantle fluids and crustal fluids was simulated in the corresponding computational model. The related computational simulation results from an example problem demonstrate that the mantle fluids can flow into the crust and mix with the crustal fluids due to the resulting convective flows in the crust-mantle system. Likewise, the crustal fluids can also flow into the upper mantle and mix with the mantle fluids. This kind of fluids mixing and exchange is very important to the better understanding of the governing processes that control the ore body formation and mineralization in the upper crust of the Earth.展开更多
Human-object interaction(HOIs)detection is a new branch of visual relationship detection,which plays an important role in the field of image understanding.Because of the complexity and diversity of image content,the d...Human-object interaction(HOIs)detection is a new branch of visual relationship detection,which plays an important role in the field of image understanding.Because of the complexity and diversity of image content,the detection of HOIs is still an onerous challenge.Unlike most of the current works for HOIs detection which only rely on the pairwise information of a human and an object,we propose a graph-based HOIs detection method that models context and global structure information.Firstly,to better utilize the relations between humans and objects,the detected humans and objects are regarded as nodes to construct a fully connected undirected graph,and the graph is pruned to obtain an HOI graph that only preserving the edges connecting human and object nodes.Then,in order to obtain more robust features of human and object nodes,two different attention-based feature extraction networks are proposed,which model global and local contexts respectively.Finally,the graph attention network is introduced to pass messages between different nodes in the HOI graph iteratively,and detect the potential HOIs.Experiments on V-COCO and HICO-DET datasets verify the effectiveness of the proposed method,and show that it is superior to many existing methods.展开更多
Nonlinear interactions between the quasi 5-day wave and tides based on meteor radar observation in the Mesosphere and Lower Thermosphere(MLT) at Maui are studied in this paper.Strong sum interaction between quasi 5-da...Nonlinear interactions between the quasi 5-day wave and tides based on meteor radar observation in the Mesosphere and Lower Thermosphere(MLT) at Maui are studied in this paper.Strong sum interaction between quasi 5-day wave and diurnal tide,and evident difference interaction between quasi 5-day wave and semidiurnal tide are observed during the time of attention.However,their difference and sum counterparts are clearly weaker.The secondary waves generated from those interactions beat with the tide and show intense modulation at the period of 5 days which confirms the existence of their interactions.Additionally,correlation coefficients among these waves are calculated to further explore their interactions and find that they can persist for several days although they are highly intermittent.The energy exchange among these waves can be reversible during the observational time.The periods when the significant difference interaction between the quasi 5-day wave and semidiurnal tide occur are much shorter than those when the significant sum interaction between the quasi 5-day wave and diurnal tide occur.Moreover,these two strong interactions can take place simultaneously.In generally,this study provides the proof of nonlinear interactions between quasi 5-day wave and tides which were seldom reported before.展开更多
Mineral–microbe interactions indirectly affect the geochemical fluxes and biogeochemical cycling of a large number of elements. Among them are toxic heavy metals (e.g. chromium), radionuclides (uranium and technetium...Mineral–microbe interactions indirectly affect the geochemical fluxes and biogeochemical cycling of a large number of elements. Among them are toxic heavy metals (e.g. chromium), radionuclides (uranium and technetium), and nitrogen. Heavy metals and radionuclides enter the environment from various sources such as mining activity, nuclear weapons production, metallurgical and chemical industries. Other metals, such as lead, arsenic, antimony, and cadmium, are enriched in certain environments by either natural or anthropogenic processes. Because many of these metals and radionuclides are carcinogens, their release into the environment and their fate cause intense scientific and public concern and are the subject of substantial research. Nitrate enters the environment largely through agricultural activity. Human health risks from nitrate uptake from drinking water supplies run the gamut from increased cancer risk to birth defects.展开更多
The molecular factors involved in the three-way interaction between plant, pathogenic fungi and antagonistic/biocontrol fungi, such as Trichoderma, are still poorly understood, even if they represent a matter of inter...The molecular factors involved in the three-way interaction between plant, pathogenic fungi and antagonistic/biocontrol fungi, such as Trichoderma, are still poorly understood, even if they represent a matter of interest for improving crop management and developing new strategies for plant diseases control. The aim of this work is to investigate the components involved in this interaction and, for this purpose, a proteomic approach was used. 2-D maps of the protein extracts from the single components in various interactions between plants (potato, bean, tobacco or tomato), pathogens (Botrytis cinerea, Rhizoctonia solani or Pythium ultimum) and biocontrol fungi (Trichoderma atroviride strain P1 or Trichoderma harzianum strain T22) were obtained. The proteome of each partner was collected separately and extracted by acetone precipitation in presence of trichloroacetic acid and a reducing agent (DTT). The extracted proteins were separated by isoelectrofocusing (IEF), using IPG (Immobilized pH gradient) strips, followed by SDS-PAGE. In order to improve resolution the separations were performed both on wide than narrow pH range and on different gel lengths. Differential spots were noted in the proteome of the three-way interaction when compared to each single component. These were further characterized by mass spectrometry and in silico analysis with the aim of identifying and cloning the relative genes. During the in vitro interaction of T. harzianum strain T22 with tomato and the culture filtrate or cell walls of pathogens, the spot number was higher than in the presence of pathogen biomass. In terms of Trichoderma differential proteins displayed on 2D gels, the most important changes were obtained in the presence of P. ultimum . During the in vivo interaction with tomato, the antagonist proteome changed much more in presence of soilborne fungi R. solani and P. ultimum than with the foliar fungus B. cinerea, both in terms of total and increased or novel spots. In silico analysis of some of those spots revealed homology with intracellular enzymes (GTPases, hydrolases) and with stress-related proteins (heat shock proteins HSP70, bacteriocin cloacin). Specific proteins in the plant proteome, i.e. pathogenesis-related proteins, have been identified during the in vivo interaction of bean with R. solani and T. atroviride strain P1. This is in agreement with the demonstrated ability of these beneficial fungi to induce plant systemic disease resistance by activating expression of defence-related genes. Proteins extracted from T. atrovride strain P1 which were analysed by mass spectrometry, revealed some interesting homologies with a fungal hydrophobin of Pleurotus ostreatus and an ABC transporter of Ralstonia metallidurans. These could represent molecular factors involved in the antagonistic mechanisms of Trichoderma and play a role in the three-way interaction with the plant and other microbes.展开更多
In the era of network live broadcasting for everyone,the development of live broadcasting platforms is also more intelligent and diversified.However,in the face of a large group of elderly users,the interface interact...In the era of network live broadcasting for everyone,the development of live broadcasting platforms is also more intelligent and diversified.However,in the face of a large group of elderly users,the interface interaction design mode used is still mainly based on the interaction mode for young groups,and is not designed for elderly users.Therefore,a design method for optimizing the interaction interface of live broadcasting platform for elderly users was proposed in this study.Firstly,the case study method and Delphi expert survey method were used to determine the design needs of elderly users and the design mode was analysed.Secondly,the orthogonal design principle was used to design a test sample of the interactive interface of live broadcasting platform applicable for the elderly users,and then a user evaluation system was established to calculate the weights of the design elements using hierarchical analysis,and then the predictive relationship between the design mode of the interactive interface of live broadcasting platform and the elderly users was established by Quantitative Theory I.Finally,Genetic Algorithm was applied to generate the optimized design scheme.The results showed that the design method based on the Genetic Algorithm and the combination of Quantitative Theory can scientifically and effectively optimize the design of the interactive interface of the live broadcasting platform for the elderly users,and improve the experience of the elderly users.展开更多
In this article, the authors obtain some theoretical results for 2_(IV)^(m-p) designs to have the maximum number of clear two-factor interactions by considering the number of two-factor interactions that are not clear...In this article, the authors obtain some theoretical results for 2_(IV)^(m-p) designs to have the maximum number of clear two-factor interactions by considering the number of two-factor interactions that are not clear. Several 2_(IV)^(m-p) designs with the maximum number of clear two-factor interactions, judged using these results, are provided for illustration.展开更多
To solve the problem of risk identification and quantitative assessment for human-computer interaction(HCI)in complex avionics systems,an HCI safety analysis framework based on system-theoretical process analysis(STPA...To solve the problem of risk identification and quantitative assessment for human-computer interaction(HCI)in complex avionics systems,an HCI safety analysis framework based on system-theoretical process analysis(STPA)and cognitive reliability and error analysis method(CREAM)is proposed.STPACREAM can identify unsafe control actions and find the causal path during the interaction of avionics systems and pilot with the help of formal verification tools automatically.The common performance conditions(CPC)of avionics systems in the aviation environment is established and a quantitative analysis of human failure is carried out.Taking the head-up display(HUD)system interaction process as an example,a case analysis is carried out,the layered safety control structure and formal model of the HUD interaction process are established.For the interactive behavior“Pilots approaching with HUD”,four unsafe control actions and35 causal scenarios are identified and the impact of common performance conditions at different levels on the pilot decision model are analyzed.The results show that HUD's HCI level gradually improves as the scores of CPC increase,and the quality of crew member cooperation and time sufficiency of the task is the key to its HCI.Through case analysis,it is shown that STPACREAM can quantitatively assess the hazards in HCI and identify the key factors that impact safety.展开更多
基金supported by the Petrochemical Research Institute Foundation(21-CB-09-01)the National Natural Science Foundation of China(22302186,22025205)+1 种基金the China Postdoctoral Science Foundation(2022M713030,2023T160618)the Fundamental Research Funds for the Central Universities(WK2060000058,WK2060000038).
文摘By simplifying catalyst-product separation and reducing phosphorus waste,heterogeneous hydroformylation offers a more sustainable alternative to homogeneous processes.However,heterogeneous hydroformylation catalysts developed thus far still suffer from the issues of much lower activity and metal leaching,which severely hinder their practical application.Here,we demonstrate that incorporating phosphorus(P)atoms into graphitic carbon nitride(PCN)supports facilitates charge transfer from Rh to the PCN support,thus largely enhancing electronic metal-support interactions(EMSIs).In the styrene hydroformylation reaction,the activity of Rh_(1)/PCN single-atom catalysts(SACs)with varying P contents exhibited a volcano-shaped relationship with P doping,where the Rh_(1)/PCN SAC with optimal P doping showed exceptional activity,approximately 5.8-and 3.3-fold greater than that of the Rh_(1)/g-C_(3)N_(4)SAC without P doping and the industrial homogeneous catalyst HRh(CO)(PPh_(3))_(3),respectively.In addition,the optimal Rh_(1)/PCN SAC catalyst also demonstrated largely enhanced multicycle stability without any visible metal aggregation owing to the increased EMSIs,which sharply differed from the severe metal aggregation of large nanoparticles on the Rh_(1)/g-C_(3)N_(4)SAC.Mechan-istic studies revealed that the enhanced catalytic performance could be attributed to electron-deficient Rh species,which reduced CO adsorption while simultaneously promoting alkene adsorption through increased EMSIs.These findings suggest that tuning EMSIs is an effective way to achieve SACs with high activity and durability.
基金supported by the Natural Science Foundation of Shanxi Province(202203021221155)the Foundation of National Key Laboratory of High Efficiency and Low Carbon Utilization of Coal(J23-24-902)。
文摘With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.
基金supported by the National Key R&D Program of China(2021YFA1501700)Fundamental Research Funds for the Central Universities(WK9990000142).
文摘The seminal report ofα-diimine palladium and nickel catalysts in 1995 represented a major breakthrough in the preparation of functionalized polyolefin materials.Owing to the high abundance and low cost of nickel,nickel-based catalysts have great application prospects in the industrialization process of olefin coordination polymerization.In this work,various N-aryl substituents with different electronic effects were synthesized and introduced intoα-diimine ligands.The aspreparedα-diimine nickel catalysts showed high polymerization activity(0.9×10^(7)–3.0×10^(7)g·mol^(−1)·h^(−1))in ethylene polymerization,generating polyethylene products with adjustable molecular weights(Mn values:7.4×10^(4)–146.9×10^(4)g·mol^(−1))and branching densities(31/1000 C–68/1000 C).The resulting polyethylene products showed excellent mechanical properties,with high tensile strength(up to 25.0 MPa)and high strain at break values(up to 3890%).The copolymerization of ethylene and polar monomers can also be achieved by these nicekel complexes,ultimately preparing functionalized polyolefins.
文摘Ice-going ships play a crucial role in polar transportation and resource extraction.Different from the existing modeling approach which assumes that ships remain stationary,dynamic overset grid technology and DFBI(Dynamic Fluid-Body Interaction)method are employed in this paper to enable the free-running motion of the ship in modeling.A numerical model capable of simulating a ship navigating through pack ice area is proposed,which uses Computational Fluid Dynamics(CFD)method to solve the flow field and applies the Discrete Element Method(DEM)to simulate ship-ice and ice-ice interactions.Besides,the proposed high-precision method for generating pack ice area can be used in conjunction with the proposed numerical model.By comparing the numerical results with the available model test data and experimental observations,the effectiveness of the numerical model is validated,demonstrating its strong capability of predicting resistance and simulating ship navigation in pack ice,as well as its significant potential and applicability for further studies.
基金supported by National Natural Science Foundation of China(32201752)Xinjiang Tianchi Talents Program (TCYC2023TP02)Key Project of the Natural Science Foundation of Xinjiang Production and Construction Corps (2024DA001)
文摘Verticillium wilt,caused by the infamous pathogen Verticillium dahliae,presents a primary constraint on cotton cul-tivation worldwide.The complexity of disease resistance in cotton and the largely unexplored interaction dynamics between the cotton plant host and V.dahliae pathogen pose a crucial predicament for effectively managing cotton Verticillium wilt.Nevertheless,the most cost-effective approach to controlling this disease involves breeding and cul-tivating resistant cotton varieties,demanding a meticulous analysis of the mechanisms underlying cotton’s resistance to Verticillium wilt and the identification of pivotal genes.These aspects constitute focal points in disease-resistance breeding programs.In this review,we comprehensively discuss genetic inheritance associated with Verticillium wilt resistance in cotton,the advancements in molecular markers for disease resistance,the functional investiga-tion of resistance genes in cotton,the analysis of pathogenicity genes in V.dahliae,as well as the intricate interplay between cotton and this fungus.Moreover,we delve into the future prospects of cutting-edge research on cotton Verticillium wilt,aiming to proffer valuable insights for the effective management of this devastating fungus.
基金supported by 973 Program of China (2013CBA01700)National Natural Science Funds (61622508, 61575032)
文摘Spin-orbit optical phenomena pertain to the wider class of electromagnetic effects originating from the interaction of the photon spin with the spatial structure and propagation characteristics of an optical wave,mediated by suitable optical media.There are many emerging photonic applications of spin-orbit interactions(SOI)of light,such as control of the optical wave propagation via the spin,enhanced optical manipulation,and generation of structured optical fields.Unfortunately,current applications are based on symmetric SOI,that is,the behaviours of polarized photons with two opposite spins are opposite,leading to the limit of spin-based multiplexers.The symmetry of SOI can be broken in our proposed metasurfaces,consisting of spatially varying birefringence,which can arbitrarily and independently build SOI for two opposite spins without reduction of optical energy usage.We obtain three kinds of dual-functional metasurfaces at visible and infrared wavelengths with high efficiency.Our concept of generation of asymmetric SOI for two spins,using anisotropic metasurfaces,will open new degrees of freedoms for building new types of spin-controlled multifunctional shared-aperture devices for the generation of complex structured optical fields.
基金Projects(51304035,50974030)supported by the National Natural Science Foundation of ChinaProject(20110491512)supported by the Postdoctoral Science Foundation of China+2 种基金Project(20130042120034)supported by the Specialized Research Fund for the Doctoral Program of Higher Education(New Teachers),ChinaProject(120401008)supported by the Fundamental Research Funds for Central Universities,ChinaProject(L20150173)supported by the Scientific Research Fund of Liaoning Provincial Education Department,China
文摘Taking into consideration the gas compressibility and chemical reaction reversibility, a model was developed to study the interactions between gas flow and chemical reaction in porous media and resolved by the finite volume method on the basis of the gas-solid reaction aA(g)+bB(s)cC(g)+dD(s).The numerical analysis shows that the equilibrium constant is an important factor influencing the process of gas-solid reaction. The stoichiometric coefficients, molar masses of reactant gas, product gas and inert gas are the main factors influencing the density of gas mixture. The equilibrium constant influences the gas flow in porous media obviously when the stoichiometric coefficients satisfy a/c≠1.
文摘In order to implement cost-effective machining of gr anite materials with diamond impregnated tools, we should realize low tool w ear, low energy consumption, and high cutting efficiency, while the accuracy of the workpiece surfaces are maintained to be satisfactory. It is understood that the main factors affecting the tool wear, the energy, and the efficiency during the machining process are related to the tribological interactions that occur at the interface between the diamond tool surface and the workpiece. Based on this consideration, we propose a new machining method to machine granite materia ls to achieve improved cost effectiveness. In the proposed method, the tribologi cal interactions are maintained to a minimum. Based on the analyses of the experimental results, the following conclusions can be drawn: The wear performance is greatly dependent on the machining parameters and their combination. Therefore, optimum machining parameters must be set up at first in order to optimize the tribological characteristics of segments and thereby sawbl ade performance. These may be realized by balancing the energy expended by frict ion and the mechanical load on diamond crystal. The geometry and structure of diamond segments are another important criterion f or the diamond saw blade. Using a seven-layer structure for multi-blades sawin g and applying segments with side slots for trimming application had greatly red uced the frictions in the sawing processes. The wetting and bonding between diamonds and matrix alloys have been considered as the prerequisite for high wear performance of the segments. Diamonds coated w ith Ti-Cr alloy by a unique technique can effectively improve its wetting c apability and provide more storage space for debris, thereby reducing friction i nteractions.
基金Project(2014BAB01B03)supported by the National Key Technology R&D Program During the 12th Five-Yean Plan of ChinaProject(51774286)supported by the National Natural Science Foundation of ChinaProject(BK20150192)supported by the Natural Science Foundation of Jiaaagsu Province,China
文摘The hydration film on particle surface plays an important role in bubble-particle adhesion in mineral flotation process. The thicknesses of the hydration films on natural hydrophobic coal and hydrophilic mica surfaces were measured directly by atomic force microscopy (AFM) based on the bending mode of the nominal constant compliance regime in AFM force curve in the present study. Surface and solid-liquid interfacial energies were calculated to explain the forming mechanism of the hydration film and atomic force microscopy data. The results show that there are significant differences in the structure and thickness of hydration films on coal and mica surfaces. Hydration film formed on mica surface with the thickness of 22.5 nm. In contrast, the bend was not detected in the nominal constant compliance regime. The van der Waals and polar interactions between both mica and coal and water molecules are characterized by an attractive effect, while the polar attractive free energy between water and mica (-87.36 mN/m) is significantly larger than that between water and coal (-32.89 mN/m), which leads to a thicker and firmer hydration layer on the mica surface. The interfacial interaction free energy of the coal/water/bubble is greater than that of mica. The polar attractive force is large enough to overcome the repulsive van der Waals force and the low energy barrier of film rupture, achieving coal particle bubble adhesion with a total interfacial free energy of-56.30 mN/m.
基金the support from the National Natural Science Foundation of China (No. 21875184)the Natural Science Foundation of Shaanxi Province (No. 2022JC-10)Youth Talent of Shaanxi “TeZhi” Program。
文摘An in-depth analysis on the cooperativity of intermolecular interactions including hydrogen bonding andπ-π stacking in 1,3,5-triamino-2,4,6-trinitrobenzene(TATB) crystal was studied. Two quantities, cooperativity rate and energy, were defined to evaluate the nature and strength of cooperativity in a series of clusters diverging from 1D to 3D prototypes. The origin and mechanism of the cooperative effect were settled to demonstrate that the nature of cooperativity is determined by whether the non-covalent interactions compete or promote with each other, which is manifested by the changing trend of electron transfer. There exists obvious cooperative effect in intra-layer and inter-layer structures as they own the equivalent non-covalent interactions, while anti-cooperative effect is also observed if two interactions correlate with each other. On the whole, in the process of crystal formation, the apparent cooperativity is the check and balance of the two effects, which is capable to support a global interaction among all of molecules and contribute to the stabilization of system. Based on the results, one may get a new insight to understand the relationship between non-covalent interactions and low impact sensitivity.
基金Project(10872219) supported by the National Natural Science Foundation of China
文摘The finite element method was used to solve fluid dynamic interaction problems between the crust and mantle of the Earth. To consider different mechanical behaviours, the lithosphere consisting of the crust and upper mantle was simulated as fluid-saturated porous rocks, while the upper aesthenospheric part of the mantle was simulated as viscous fluids. Since the whole lithosphere was computationally simulated, the dynamic interaction between the crust and the upper mantle was appropriately considered. In particular, the mixing of mantle fluids and crustal fluids was simulated in the corresponding computational model. The related computational simulation results from an example problem demonstrate that the mantle fluids can flow into the crust and mix with the crustal fluids due to the resulting convective flows in the crust-mantle system. Likewise, the crustal fluids can also flow into the upper mantle and mix with the mantle fluids. This kind of fluids mixing and exchange is very important to the better understanding of the governing processes that control the ore body formation and mineralization in the upper crust of the Earth.
基金Project(51678075)supported by the National Natural Science Foundation of ChinaProject(2017GK2271)supported by the Hunan Provincial Science and Technology Department,China。
文摘Human-object interaction(HOIs)detection is a new branch of visual relationship detection,which plays an important role in the field of image understanding.Because of the complexity and diversity of image content,the detection of HOIs is still an onerous challenge.Unlike most of the current works for HOIs detection which only rely on the pairwise information of a human and an object,we propose a graph-based HOIs detection method that models context and global structure information.Firstly,to better utilize the relations between humans and objects,the detected humans and objects are regarded as nodes to construct a fully connected undirected graph,and the graph is pruned to obtain an HOI graph that only preserving the edges connecting human and object nodes.Then,in order to obtain more robust features of human and object nodes,two different attention-based feature extraction networks are proposed,which model global and local contexts respectively.Finally,the graph attention network is introduced to pass messages between different nodes in the HOI graph iteratively,and detect the potential HOIs.Experiments on V-COCO and HICO-DET datasets verify the effectiveness of the proposed method,and show that it is superior to many existing methods.
基金Supported by the National Natural Science Foundation of China(41174126)the Specialized Fund for Comprehensive Study and Evaluation of the Polar Environment(CHINARE2014-02-03)
文摘Nonlinear interactions between the quasi 5-day wave and tides based on meteor radar observation in the Mesosphere and Lower Thermosphere(MLT) at Maui are studied in this paper.Strong sum interaction between quasi 5-day wave and diurnal tide,and evident difference interaction between quasi 5-day wave and semidiurnal tide are observed during the time of attention.However,their difference and sum counterparts are clearly weaker.The secondary waves generated from those interactions beat with the tide and show intense modulation at the period of 5 days which confirms the existence of their interactions.Additionally,correlation coefficients among these waves are calculated to further explore their interactions and find that they can persist for several days although they are highly intermittent.The energy exchange among these waves can be reversible during the observational time.The periods when the significant difference interaction between the quasi 5-day wave and semidiurnal tide occur are much shorter than those when the significant sum interaction between the quasi 5-day wave and diurnal tide occur.Moreover,these two strong interactions can take place simultaneously.In generally,this study provides the proof of nonlinear interactions between quasi 5-day wave and tides which were seldom reported before.
文摘Mineral–microbe interactions indirectly affect the geochemical fluxes and biogeochemical cycling of a large number of elements. Among them are toxic heavy metals (e.g. chromium), radionuclides (uranium and technetium), and nitrogen. Heavy metals and radionuclides enter the environment from various sources such as mining activity, nuclear weapons production, metallurgical and chemical industries. Other metals, such as lead, arsenic, antimony, and cadmium, are enriched in certain environments by either natural or anthropogenic processes. Because many of these metals and radionuclides are carcinogens, their release into the environment and their fate cause intense scientific and public concern and are the subject of substantial research. Nitrate enters the environment largely through agricultural activity. Human health risks from nitrate uptake from drinking water supplies run the gamut from increased cancer risk to birth defects.
文摘The molecular factors involved in the three-way interaction between plant, pathogenic fungi and antagonistic/biocontrol fungi, such as Trichoderma, are still poorly understood, even if they represent a matter of interest for improving crop management and developing new strategies for plant diseases control. The aim of this work is to investigate the components involved in this interaction and, for this purpose, a proteomic approach was used. 2-D maps of the protein extracts from the single components in various interactions between plants (potato, bean, tobacco or tomato), pathogens (Botrytis cinerea, Rhizoctonia solani or Pythium ultimum) and biocontrol fungi (Trichoderma atroviride strain P1 or Trichoderma harzianum strain T22) were obtained. The proteome of each partner was collected separately and extracted by acetone precipitation in presence of trichloroacetic acid and a reducing agent (DTT). The extracted proteins were separated by isoelectrofocusing (IEF), using IPG (Immobilized pH gradient) strips, followed by SDS-PAGE. In order to improve resolution the separations were performed both on wide than narrow pH range and on different gel lengths. Differential spots were noted in the proteome of the three-way interaction when compared to each single component. These were further characterized by mass spectrometry and in silico analysis with the aim of identifying and cloning the relative genes. During the in vitro interaction of T. harzianum strain T22 with tomato and the culture filtrate or cell walls of pathogens, the spot number was higher than in the presence of pathogen biomass. In terms of Trichoderma differential proteins displayed on 2D gels, the most important changes were obtained in the presence of P. ultimum . During the in vivo interaction with tomato, the antagonist proteome changed much more in presence of soilborne fungi R. solani and P. ultimum than with the foliar fungus B. cinerea, both in terms of total and increased or novel spots. In silico analysis of some of those spots revealed homology with intracellular enzymes (GTPases, hydrolases) and with stress-related proteins (heat shock proteins HSP70, bacteriocin cloacin). Specific proteins in the plant proteome, i.e. pathogenesis-related proteins, have been identified during the in vivo interaction of bean with R. solani and T. atroviride strain P1. This is in agreement with the demonstrated ability of these beneficial fungi to induce plant systemic disease resistance by activating expression of defence-related genes. Proteins extracted from T. atrovride strain P1 which were analysed by mass spectrometry, revealed some interesting homologies with a fungal hydrophobin of Pleurotus ostreatus and an ABC transporter of Ralstonia metallidurans. These could represent molecular factors involved in the antagonistic mechanisms of Trichoderma and play a role in the three-way interaction with the plant and other microbes.
文摘In the era of network live broadcasting for everyone,the development of live broadcasting platforms is also more intelligent and diversified.However,in the face of a large group of elderly users,the interface interaction design mode used is still mainly based on the interaction mode for young groups,and is not designed for elderly users.Therefore,a design method for optimizing the interaction interface of live broadcasting platform for elderly users was proposed in this study.Firstly,the case study method and Delphi expert survey method were used to determine the design needs of elderly users and the design mode was analysed.Secondly,the orthogonal design principle was used to design a test sample of the interactive interface of live broadcasting platform applicable for the elderly users,and then a user evaluation system was established to calculate the weights of the design elements using hierarchical analysis,and then the predictive relationship between the design mode of the interactive interface of live broadcasting platform and the elderly users was established by Quantitative Theory I.Finally,Genetic Algorithm was applied to generate the optimized design scheme.The results showed that the design method based on the Genetic Algorithm and the combination of Quantitative Theory can scientifically and effectively optimize the design of the interactive interface of the live broadcasting platform for the elderly users,and improve the experience of the elderly users.
基金Research supported by the NNSF of China (10301015: 10571093)the SRFDP of China (20050055038)the China Portdoctoral Science Foundation (20060390169)Liu and Zhang's research was also supported by the Visiting Scholar Program at Chern Institute of Mathematics.
文摘In this article, the authors obtain some theoretical results for 2_(IV)^(m-p) designs to have the maximum number of clear two-factor interactions by considering the number of two-factor interactions that are not clear. Several 2_(IV)^(m-p) designs with the maximum number of clear two-factor interactions, judged using these results, are provided for illustration.
基金supported by the National Key Research and Development Program of China(2021YFB1600601)the Joint Funds of the National Natural Science Foundation of China and the Civil Aviation Administration of China(U1933106)+2 种基金the Scientific Research Project of Tianjin Educational Committee(2019KJ134)the Natural Science Foundation of TianjinIntelligent Civil Aviation Program(21JCQNJ C00900)。
文摘To solve the problem of risk identification and quantitative assessment for human-computer interaction(HCI)in complex avionics systems,an HCI safety analysis framework based on system-theoretical process analysis(STPA)and cognitive reliability and error analysis method(CREAM)is proposed.STPACREAM can identify unsafe control actions and find the causal path during the interaction of avionics systems and pilot with the help of formal verification tools automatically.The common performance conditions(CPC)of avionics systems in the aviation environment is established and a quantitative analysis of human failure is carried out.Taking the head-up display(HUD)system interaction process as an example,a case analysis is carried out,the layered safety control structure and formal model of the HUD interaction process are established.For the interactive behavior“Pilots approaching with HUD”,four unsafe control actions and35 causal scenarios are identified and the impact of common performance conditions at different levels on the pilot decision model are analyzed.The results show that HUD's HCI level gradually improves as the scores of CPC increase,and the quality of crew member cooperation and time sufficiency of the task is the key to its HCI.Through case analysis,it is shown that STPACREAM can quantitatively assess the hazards in HCI and identify the key factors that impact safety.
