β-Ga_(2)O_(3)以其较高的导带底(Conduction Band Minimum,CBM)和较低的价带顶(Valence Band Maximum,VBM),赋予其光生电子和空穴较强的还原与氧化能力,但其宽禁带和高载流子复合率限制了在光催化中的应用.金属离子掺杂被认为是提升光...β-Ga_(2)O_(3)以其较高的导带底(Conduction Band Minimum,CBM)和较低的价带顶(Valence Band Maximum,VBM),赋予其光生电子和空穴较强的还原与氧化能力,但其宽禁带和高载流子复合率限制了在光催化中的应用.金属离子掺杂被认为是提升光催化性能的有效途径.本文基于第一性原理系统研究了Sr、Ba、V、Nb、Ta等二十种元素掺杂对β-Ga_(2)O_(3)光催化性能的影响,研究发现:Sr、Nb、Ta、Mn、Fe、Zn、Hg七种元素掺杂β-Ga_(2)O_(3)后,材料除能保持合适的带边位置外,还具有更高的电子空穴分离效率以及更低的形成能,表明这些元素的引入可有效提升β-Ga_(2)O_(3)光催化效率;Nb、Ta掺杂可显著增强材料在红外光区的吸收,Mn、Fe掺杂则显著提升材料在紫外和可见光区的吸收能力,其中,Nb在0.5 eV处光吸收系数高达1.38×10^(5)cm^(−1),Mn、Fe掺杂在3 eV处光吸收系数可达1×10^(5)cm^(−1),在不同波段均呈现出良好的光吸收能力.此外,Hg掺杂表现出跨红外至深紫外的宽波段增强效果,Hg掺杂后,电子空穴相对有效质量高达109,说明Hg掺杂显著提升载流子分离能力,同时由于其在宽波段显著增强的光吸收效果,因此,Hg可作为β-Ga_(2)O_(3)在光催化制氢中理想的金属掺杂元素,以上研究结果为β-Ga_(2)O_(3)光催化分解水制氢研究提供了价值参考.展开更多
Nanoparticles are increasingly being used to improve the friction and wear performance of polymers. In this study, we investigated the tribological behavior and energy dissipation characteristics of nano-Al_2O_3-reinf...Nanoparticles are increasingly being used to improve the friction and wear performance of polymers. In this study, we investigated the tribological behavior and energy dissipation characteristics of nano-Al_2O_3-reinforced polytetrafluoroethylenepolyphenylene sulfide(PTFE-PPS) composites in a sliding system. The tribological behaviors of the composites were evaluated under different normal loads(100–300 N) at a high linear velocity(2 m/s) using a block-on-ring tester. Addition of the nano-Al_2O_3 filler improved the antiwear performance of the PTFE-PPS composites, and the friction coefficient increased slightly. The lowest wear rate was obtained when the nano-Al_2O_3 content was 3%(volume fraction). Further, the results indicated a linear correlation between wear and the amount of energy dissipated, even though the wear mechanism changed with the nano-Al_2O_3 content, independent of the normal load applied.展开更多
文摘β-Ga_(2)O_(3)以其较高的导带底(Conduction Band Minimum,CBM)和较低的价带顶(Valence Band Maximum,VBM),赋予其光生电子和空穴较强的还原与氧化能力,但其宽禁带和高载流子复合率限制了在光催化中的应用.金属离子掺杂被认为是提升光催化性能的有效途径.本文基于第一性原理系统研究了Sr、Ba、V、Nb、Ta等二十种元素掺杂对β-Ga_(2)O_(3)光催化性能的影响,研究发现:Sr、Nb、Ta、Mn、Fe、Zn、Hg七种元素掺杂β-Ga_(2)O_(3)后,材料除能保持合适的带边位置外,还具有更高的电子空穴分离效率以及更低的形成能,表明这些元素的引入可有效提升β-Ga_(2)O_(3)光催化效率;Nb、Ta掺杂可显著增强材料在红外光区的吸收,Mn、Fe掺杂则显著提升材料在紫外和可见光区的吸收能力,其中,Nb在0.5 eV处光吸收系数高达1.38×10^(5)cm^(−1),Mn、Fe掺杂在3 eV处光吸收系数可达1×10^(5)cm^(−1),在不同波段均呈现出良好的光吸收能力.此外,Hg掺杂表现出跨红外至深紫外的宽波段增强效果,Hg掺杂后,电子空穴相对有效质量高达109,说明Hg掺杂显著提升载流子分离能力,同时由于其在宽波段显著增强的光吸收效果,因此,Hg可作为β-Ga_(2)O_(3)在光催化制氢中理想的金属掺杂元素,以上研究结果为β-Ga_(2)O_(3)光催化分解水制氢研究提供了价值参考.
基金Project(51165022)supported by the National Natural Science Foundation of ChinaProject(20122117)supported by the Lanzhou Science and Technology Bureau Foundation,ChinaProject(1310RJZA036)supported by the Natural Science Foundation of Gansu Province,China
文摘Nanoparticles are increasingly being used to improve the friction and wear performance of polymers. In this study, we investigated the tribological behavior and energy dissipation characteristics of nano-Al_2O_3-reinforced polytetrafluoroethylenepolyphenylene sulfide(PTFE-PPS) composites in a sliding system. The tribological behaviors of the composites were evaluated under different normal loads(100–300 N) at a high linear velocity(2 m/s) using a block-on-ring tester. Addition of the nano-Al_2O_3 filler improved the antiwear performance of the PTFE-PPS composites, and the friction coefficient increased slightly. The lowest wear rate was obtained when the nano-Al_2O_3 content was 3%(volume fraction). Further, the results indicated a linear correlation between wear and the amount of energy dissipated, even though the wear mechanism changed with the nano-Al_2O_3 content, independent of the normal load applied.
