A contact bolt model is proposed as a new modeling technique to investigate the complex structure with bolted joints for modal analysis and compared with the coupled bolt model, and the test results are given. Among t...A contact bolt model is proposed as a new modeling technique to investigate the complex structure with bolted joints for modal analysis and compared with the coupled bolt model, and the test results are given. Among these models, the coupled bolt model provides the best accurate responses compared with the experimental results. The contact bolt model shows the best effectiveness and usefulness in view of operational time. The bolt models proposed in this study are adopted for a dynamic characteristic analysis of a large diesel engine consisting of several parts which are connected by many bolts. The dynamic behavior of the entire engine structure was investigated by experiment. The coupled bolt model and the contact bolt model were applied to model the assembly of engine with high preload. The experimental results are in good agreement with the finite element method （FEM） results. Compared with the other models, the contact bolt model presented in this paper is more effective and useful in view of operational time and experience of analysts.展开更多
Through taking uncertain mechanical parameters of composites into consideration,this paper carries out uncertain modal analysis for an unmanned aircraft landing gear.By describing correlated multi-dimensional mechanic...Through taking uncertain mechanical parameters of composites into consideration,this paper carries out uncertain modal analysis for an unmanned aircraft landing gear.By describing correlated multi-dimensional mechanical parameters as a convex polyhedral model,the modal analysis problem of a composite landing gear is transferred into a linear fractional programming(LFR)eigenvalue solution problem.As a consequent,the extreme-point algorithm is proposed to estimate lower and upper bounds of eigenvalues,namely the exact results of eigenvalues can be easily obtained at the extreme-point locations of the convex polyhedral model.The simulation results show that the proposed model and algorithm can play an important role in the eigenvalue solution problem and possess valuable engineering significance.It will be a powerful and effective tool for further vibration analysis for the landing gear.展开更多
A three-dimensional model of the uplift device of a sugarcane harvester was built up in Pro/Engineer. Simulation and evaluation of its motional and dynamic performance were performed with the automatic dynamic analysi...A three-dimensional model of the uplift device of a sugarcane harvester was built up in Pro/Engineer. Simulation and evaluation of its motional and dynamic performance were performed with the automatic dynamic analysis of mechanical system (ADAMS). ANSYS program was applied to the structural analysis of the model. A finite element analytic model was built up with the bottom-up methodology and was meshed. The default Block Lanczos method was used to work out the native frequency. The results indicate that the five lower modes-the transpotaion wheel, the left holding device, the right holding device, the left cutter disk, and the right cutter disk- and displacement of vibratory type only slightly affect the process of sugarcane harvester and harvesting quality. So it is advisable that the optimization of the static intensity other than the dynamic stiffness of uplift device be executed.展开更多
A ship is operated under an extremely complex environment, and waves and winds are assumed to be the stochastic excitations. Moreover, the propeller, host and mechanical equipment can also induce the harmonic response...A ship is operated under an extremely complex environment, and waves and winds are assumed to be the stochastic excitations. Moreover, the propeller, host and mechanical equipment can also induce the harmonic responses. In order to reduce structural vibration, it is important to obtain the modal parameters information of a ship. However, the traditional modal parameter identification methods are not suitable since the excitation information is difficult to obtain. Natural excitation technique-eigensystem realization algorithm （NExT-ERA） is an operational modal identification method which abstracts modal parameters only from the response signals, and it is based on the assumption that the input to the structure is pure white noise. Hence, it is necessary to study the influence of harmonic excitations while applying the NExT-ERA method to a ship structure. The results of this research paper indicate the practical experiences under ambient excitation, ship model experiments were successfully done in the modal parameters identification only when the harmonic frequencies were not too close to the modal frequencies.展开更多
To set up the dynamic FEM model of a high-duty diesel's lower crankcase with sufficient precision, modal correlation research on tested and calculated modes have been fulfilled. MACs between each mode pairs, CoMAC...To set up the dynamic FEM model of a high-duty diesel's lower crankcase with sufficient precision, modal correlation research on tested and calculated modes have been fulfilled. MACs between each mode pairs, CoMACs and ECoMACs on each node of modal testing model have been calculated. On the assistant of modal shape comparison, MACs could afford information about correlating relations between tested and calculated mode groups. CoMACs and ECoMACs have pointed out the direction of structure modification to FEM model. The results of the study show that the analytic model built has a certain degree of accuracy.展开更多
To control the vibration level of ships under construction,MSC Software’s Patran&Nastran modeling solutions can be used to establish a detailed finite element model of a new manned submersible support mother ship...To control the vibration level of ships under construction,MSC Software’s Patran&Nastran modeling solutions can be used to establish a detailed finite element model of a new manned submersible support mother ship based on a line drawing,including the deck layout,bulkhead section,and stiffener distribution.After a comprehensive analysis of the ship simulation conditions,boundaries,and excitation forces of the main operating equipment,modal analysis and calculation of the ship vibration can be conducted.In this study,we calculated and analyzed the vibration response of key points in the stern area of the ship’s main deck and the submersible warehouse area under design loading working conditions.We then analyzed the vibration response of typical decks(including the compass deck,steering deck,captain’s deck,forecastle deck,and main deck)under the main excitation forces and moments(such as the full swing pod and generator sets).The analysis results showed that under DESIDEP working conditions,the vibration of each deck and key areas of the support mother ship could meet the vibration code requirements of the ship’s preliminary design(using the pod excitation and generator sets).Similarly,the vibration response of a scientific research ship under other loading conditions also met the requirements of the code and provided data support for a comprehensive understanding of the ship’s vibration and noise levels.Using actual vibration measurements,the accuracy of the vibration level simulations using finite element modeling was verified,the vibration of each area of the ship comfortably meeting the requirements of the China Classification Society.展开更多
A dynamic finite element method combined with finite element mixed formula for contact problem is used to analyze the dynamic characteristics of gear system. Considering the stiffness excitation, error excitation and ...A dynamic finite element method combined with finite element mixed formula for contact problem is used to analyze the dynamic characteristics of gear system. Considering the stiffness excitation, error excitation and meshing shock excitation, the dynamic finite element model is established for the entire gear system which includes gears, shafts, bearings and gearbox housing. By the software of I-DEAS, the natural frequency, normal mode, dynamic time-domain response, frequency-domain response and one-third octave velocity grade structure borne noise of gear system are studied by the method of theoretical modal analysis and dynamic response analysis. The maximum values of vibration and structure borne noise are occurred at the mesh frequency of output grade gearing.展开更多
A new approach to modifying the stiffness and mass matrices of finite element models is presented to improve the calculation precision.By measuring the mode frequencies and shapes of both of the original and the new s...A new approach to modifying the stiffness and mass matrices of finite element models is presented to improve the calculation precision.By measuring the mode frequencies and shapes of both of the original and the new structures with changed stiffness and mass,the stiffness and mass matrices of the finite element model can be updated through matrices calculation and solving algebra equations.Taking a multi-freedom model as an example,the relation between the number of the modes and the correction precision of stiffness and mass matrix elements is researched.The facility and precision of the method are totally confirmed especially when the modeling error is known limited to a definite local range.The feasibility of the approach is proven by an effective engineering application to the model updating of a wing piece used in flutter test.展开更多
To improve the performance of the 2 m telescope, the optimum design is applied to the telescope assemble. Referring to the telescope assemble with the dimetric truss, a group of reasonable sizes of the telescope assem...To improve the performance of the 2 m telescope, the optimum design is applied to the telescope assemble. Referring to the telescope assemble with the dimetric truss, a group of reasonable sizes of the telescope assemble are found by optimization methods and modal analysis, which will raise the resonant frequency by 4.21 %. As a result, the telescope assemble is less likely to resonate. Besides, the dynamic response module in ANSYS is utilized to analyze the modal type, harmonic vibration response and random vibration response of the telescope assemble. By the calculation of ANSYS, finite dement analysis （FEA） method proves that the performance of the telescope assemble is mildly enhanced by means of optimum design.展开更多
In this paper, a model order reduction strategy is adopted for the static and dynamic behaviour simulation of a high-speed tracked vehicle. The total number of degree of freedom of the structure is condensed through a...In this paper, a model order reduction strategy is adopted for the static and dynamic behaviour simulation of a high-speed tracked vehicle. The total number of degree of freedom of the structure is condensed through a selection of interface degrees of freedom and significant global mode shapes, for an approximated description of vehicle dynamic behaviour. The methodology is implemented in a customised open-source software to reduce the computational efforts. The modelled tracked vehicle includes the sprung mass, the unsprung masses, connected by means of torsional bars, and all the track assemblies, composing the track chain. The proposed research activity presents a comprehensive investigation of the influence of the track chain, combined with longitudinal vehicle speed, on statics and vehicle dynamics, focusing on vertical dynamics. The vehicle response has been investigated both in frequency and time domain. In this last case road-wheel displacements are assumed as inputs for the model, under different working conditions, hence considering several road profiles with different amplitudes and characteristic excitation frequencies. Simulation results have proven a high fidelity in model order reduction approach and a significant contribution of the track chain in the global dynamic behaviour of the tracked vehicle.展开更多
The low-frequency oscillation(LFO)has occurred in the train-network system due to the introduction of the power electronics of the trains.The modeling and analyzing method in current researches based on electrified ra...The low-frequency oscillation(LFO)has occurred in the train-network system due to the introduction of the power electronics of the trains.The modeling and analyzing method in current researches based on electrified railway unilateral power supply system are not suitable for the LFO analysis in a bilateral power supply system,where the trains are supplied by two traction substations.In this work,based on the single-input and single-output impedance model of China CRH5 trains,the node admittance matrices of the train-network system both in unilateral and bilateral power supply modes are established,including three-phase power grid,traction transformers and traction network.Then the modal analysis is used to study the oscillation modes and propagation characteristics of the unilateral and bilateral power supply systems.Moreover,the influence of the equivalent inductance of the power grid,the length of the transmission line,and the length of the traction network are analyzed on the critical oscillation mode of the bilateral power supply system.Finally,the theoretical analysis results are verified by the time-domain simulation model in MATLAB/Simulink.展开更多
The modeling and identification of anisotropic damping property of Ni based single crystal alloys are presented. The anisotropic material damping property is modeled by 3 D rheological equations and identified by us...The modeling and identification of anisotropic damping property of Ni based single crystal alloys are presented. The anisotropic material damping property is modeled by 3 D rheological equations and identified by using specimen modal damping ratios and FEM simulation. The measured damping ratios which exhibit strong anisotropy are predicted better by the method presented than by other methods.展开更多
The transmission of transverse vibrational energy of a vertically rigid beam plate coupled structure is analyzed to get the theoretical results of coupling loss factor(CLF), a very important parameter in statistical ...The transmission of transverse vibrational energy of a vertically rigid beam plate coupled structure is analyzed to get the theoretical results of coupling loss factor(CLF), a very important parameter in statistical energy analysis(SEA). The modal analysis method is used to discuss the vibration energy of the typical model, as well as the power flow between the two subsystems. Furthermore, the resolution to the coupling loss factor is also derived and compared with the measured values. The analytical results of the coupling loss factor agree with the measured ones fully, this new resolution is significant for the application of SEA.展开更多
Aimed at requirements, a kind of radar stabilized platform with external rotor and orthogonal shafts is designed. Its dynamic characters are analyzed by using finite element theory and ANSYS software. Also, a traditio...Aimed at requirements, a kind of radar stabilized platform with external rotor and orthogonal shafts is designed. Its dynamic characters are analyzed by using finite element theory and ANSYS software. Also, a traditional stabilized platform with inner rotor is designed for comparison. It is shown that the new platform reduces two transmission links and 20% of precise components, its weight decreases by 20%, its natural frequency and rigidity are enlarged, the operating accuracy and stationary are increased. The new stabilized platform is more superiority and practicability. Its design method and analysis results have already been used in development mission. It provides helpful reference for similar structure designs.展开更多
To provide a good machining method in remanufacturing for the repaired parts with various forms, the design method of reconfigurable multi-process combined machining system and its implementation technology for remanu...To provide a good machining method in remanufacturing for the repaired parts with various forms, the design method of reconfigurable multi-process combined machining system and its implementation technology for remanufacturing are systematically proposed. The key technologies include reconfigurable structure design method of multi-process combined machining, man-machine coordination parameter programming and control system technology with self-maintenance function. A turn-milling machine tool based on this design method is developed. Natural frequency and corresponding vibration modes of the machine tool were analyzed by using both FEA and vibration test. Stiffness tests and machining experiments show that the rapid machining of most processes for the repaired work pieces can be successfully realized.展开更多
An experimental program was undertaken to test the feasibility to detect the occurrence of structural damage using a modified mode shape difference technique. The vibration response of a steel beam fixed at one end an...An experimental program was undertaken to test the feasibility to detect the occurrence of structural damage using a modified mode shape difference technique. The vibration response of a steel beam fixed at one end and hinged at the other was obtained for the intact and damage conditions. Modal analysis was performed to extract the frequencies and mode shapes. The method shows a good potential in detection of occurrence and location of damage.展开更多
基金Sponsored by the Ministerial Level Foundation(40402020105)
文摘A contact bolt model is proposed as a new modeling technique to investigate the complex structure with bolted joints for modal analysis and compared with the coupled bolt model, and the test results are given. Among these models, the coupled bolt model provides the best accurate responses compared with the experimental results. The contact bolt model shows the best effectiveness and usefulness in view of operational time. The bolt models proposed in this study are adopted for a dynamic characteristic analysis of a large diesel engine consisting of several parts which are connected by many bolts. The dynamic behavior of the entire engine structure was investigated by experiment. The coupled bolt model and the contact bolt model were applied to model the assembly of engine with high preload. The experimental results are in good agreement with the finite element method （FEM） results. Compared with the other models, the contact bolt model presented in this paper is more effective and useful in view of operational time and experience of analysts.
基金supported by the National Nature Science Foundation of China(No.51805503)the Beijing Natural Science Foundation(No.3202035)。
文摘Through taking uncertain mechanical parameters of composites into consideration,this paper carries out uncertain modal analysis for an unmanned aircraft landing gear.By describing correlated multi-dimensional mechanical parameters as a convex polyhedral model,the modal analysis problem of a composite landing gear is transferred into a linear fractional programming(LFR)eigenvalue solution problem.As a consequent,the extreme-point algorithm is proposed to estimate lower and upper bounds of eigenvalues,namely the exact results of eigenvalues can be easily obtained at the extreme-point locations of the convex polyhedral model.The simulation results show that the proposed model and algorithm can play an important role in the eigenvalue solution problem and possess valuable engineering significance.It will be a powerful and effective tool for further vibration analysis for the landing gear.
基金the National Natural Science Foundation (Grant No. 50365001),Guangxi Young Scientists’ Foundation (Grant No. Gui Qin Ke 0640013)PhD Startup Found-ation of Guangxi University of Technology (Project No. 500514).
文摘A three-dimensional model of the uplift device of a sugarcane harvester was built up in Pro/Engineer. Simulation and evaluation of its motional and dynamic performance were performed with the automatic dynamic analysis of mechanical system (ADAMS). ANSYS program was applied to the structural analysis of the model. A finite element analytic model was built up with the bottom-up methodology and was meshed. The default Block Lanczos method was used to work out the native frequency. The results indicate that the five lower modes-the transpotaion wheel, the left holding device, the right holding device, the left cutter disk, and the right cutter disk- and displacement of vibratory type only slightly affect the process of sugarcane harvester and harvesting quality. So it is advisable that the optimization of the static intensity other than the dynamic stiffness of uplift device be executed.
基金Supported by the National Natural Science Foundation of China（51079027）
文摘A ship is operated under an extremely complex environment, and waves and winds are assumed to be the stochastic excitations. Moreover, the propeller, host and mechanical equipment can also induce the harmonic responses. In order to reduce structural vibration, it is important to obtain the modal parameters information of a ship. However, the traditional modal parameter identification methods are not suitable since the excitation information is difficult to obtain. Natural excitation technique-eigensystem realization algorithm （NExT-ERA） is an operational modal identification method which abstracts modal parameters only from the response signals, and it is based on the assumption that the input to the structure is pure white noise. Hence, it is necessary to study the influence of harmonic excitations while applying the NExT-ERA method to a ship structure. The results of this research paper indicate the practical experiences under ambient excitation, ship model experiments were successfully done in the modal parameters identification only when the harmonic frequencies were not too close to the modal frequencies.
文摘To set up the dynamic FEM model of a high-duty diesel's lower crankcase with sufficient precision, modal correlation research on tested and calculated modes have been fulfilled. MACs between each mode pairs, CoMACs and ECoMACs on each node of modal testing model have been calculated. On the assistant of modal shape comparison, MACs could afford information about correlating relations between tested and calculated mode groups. CoMACs and ECoMACs have pointed out the direction of structure modification to FEM model. The results of the study show that the analytic model built has a certain degree of accuracy.
基金Supported by the Research and Implementation of Sea Trial Technology(Grant No.2016YFC03000704).
文摘To control the vibration level of ships under construction,MSC Software’s Patran&Nastran modeling solutions can be used to establish a detailed finite element model of a new manned submersible support mother ship based on a line drawing,including the deck layout,bulkhead section,and stiffener distribution.After a comprehensive analysis of the ship simulation conditions,boundaries,and excitation forces of the main operating equipment,modal analysis and calculation of the ship vibration can be conducted.In this study,we calculated and analyzed the vibration response of key points in the stern area of the ship’s main deck and the submersible warehouse area under design loading working conditions.We then analyzed the vibration response of typical decks(including the compass deck,steering deck,captain’s deck,forecastle deck,and main deck)under the main excitation forces and moments(such as the full swing pod and generator sets).The analysis results showed that under DESIDEP working conditions,the vibration of each deck and key areas of the support mother ship could meet the vibration code requirements of the ship’s preliminary design(using the pod excitation and generator sets).Similarly,the vibration response of a scientific research ship under other loading conditions also met the requirements of the code and provided data support for a comprehensive understanding of the ship’s vibration and noise levels.Using actual vibration measurements,the accuracy of the vibration level simulations using finite element modeling was verified,the vibration of each area of the ship comfortably meeting the requirements of the China Classification Society.
基金Funded by the Natural Science Foundation of China (No. 50675232)the Natural Science Foundation of CQ CSTC (2006BB3008)
文摘A dynamic finite element method combined with finite element mixed formula for contact problem is used to analyze the dynamic characteristics of gear system. Considering the stiffness excitation, error excitation and meshing shock excitation, the dynamic finite element model is established for the entire gear system which includes gears, shafts, bearings and gearbox housing. By the software of I-DEAS, the natural frequency, normal mode, dynamic time-domain response, frequency-domain response and one-third octave velocity grade structure borne noise of gear system are studied by the method of theoretical modal analysis and dynamic response analysis. The maximum values of vibration and structure borne noise are occurred at the mesh frequency of output grade gearing.
基金Supported by the National High Technology Research and Development Program of China(″863″Program)(2008AA12A205)the Aeronautical Science Foundation of China(2012ZA52001)
文摘A new approach to modifying the stiffness and mass matrices of finite element models is presented to improve the calculation precision.By measuring the mode frequencies and shapes of both of the original and the new structures with changed stiffness and mass,the stiffness and mass matrices of the finite element model can be updated through matrices calculation and solving algebra equations.Taking a multi-freedom model as an example,the relation between the number of the modes and the correction precision of stiffness and mass matrix elements is researched.The facility and precision of the method are totally confirmed especially when the modeling error is known limited to a definite local range.The feasibility of the approach is proven by an effective engineering application to the model updating of a wing piece used in flutter test.
基金the Ministerial Level Advanced Rearch Foundation (304030401)
文摘To improve the performance of the 2 m telescope, the optimum design is applied to the telescope assemble. Referring to the telescope assemble with the dimetric truss, a group of reasonable sizes of the telescope assemble are found by optimization methods and modal analysis, which will raise the resonant frequency by 4.21 %. As a result, the telescope assemble is less likely to resonate. Besides, the dynamic response module in ANSYS is utilized to analyze the modal type, harmonic vibration response and random vibration response of the telescope assemble. By the calculation of ANSYS, finite dement analysis （FEA） method proves that the performance of the telescope assemble is mildly enhanced by means of optimum design.
文摘In this paper, a model order reduction strategy is adopted for the static and dynamic behaviour simulation of a high-speed tracked vehicle. The total number of degree of freedom of the structure is condensed through a selection of interface degrees of freedom and significant global mode shapes, for an approximated description of vehicle dynamic behaviour. The methodology is implemented in a customised open-source software to reduce the computational efforts. The modelled tracked vehicle includes the sprung mass, the unsprung masses, connected by means of torsional bars, and all the track assemblies, composing the track chain. The proposed research activity presents a comprehensive investigation of the influence of the track chain, combined with longitudinal vehicle speed, on statics and vehicle dynamics, focusing on vertical dynamics. The vehicle response has been investigated both in frequency and time domain. In this last case road-wheel displacements are assumed as inputs for the model, under different working conditions, hence considering several road profiles with different amplitudes and characteristic excitation frequencies. Simulation results have proven a high fidelity in model order reduction approach and a significant contribution of the track chain in the global dynamic behaviour of the tracked vehicle.
基金This work was supported by the Applied Basic Research Program of Science and Technology Plan Project of Sichuan Province of China(No.2020YJ0252).
文摘The low-frequency oscillation(LFO)has occurred in the train-network system due to the introduction of the power electronics of the trains.The modeling and analyzing method in current researches based on electrified railway unilateral power supply system are not suitable for the LFO analysis in a bilateral power supply system,where the trains are supplied by two traction substations.In this work,based on the single-input and single-output impedance model of China CRH5 trains,the node admittance matrices of the train-network system both in unilateral and bilateral power supply modes are established,including three-phase power grid,traction transformers and traction network.Then the modal analysis is used to study the oscillation modes and propagation characteristics of the unilateral and bilateral power supply systems.Moreover,the influence of the equivalent inductance of the power grid,the length of the transmission line,and the length of the traction network are analyzed on the critical oscillation mode of the bilateral power supply system.Finally,the theoretical analysis results are verified by the time-domain simulation model in MATLAB/Simulink.
文摘The modeling and identification of anisotropic damping property of Ni based single crystal alloys are presented. The anisotropic material damping property is modeled by 3 D rheological equations and identified by using specimen modal damping ratios and FEM simulation. The measured damping ratios which exhibit strong anisotropy are predicted better by the method presented than by other methods.
文摘The transmission of transverse vibrational energy of a vertically rigid beam plate coupled structure is analyzed to get the theoretical results of coupling loss factor(CLF), a very important parameter in statistical energy analysis(SEA). The modal analysis method is used to discuss the vibration energy of the typical model, as well as the power flow between the two subsystems. Furthermore, the resolution to the coupling loss factor is also derived and compared with the measured values. The analytical results of the coupling loss factor agree with the measured ones fully, this new resolution is significant for the application of SEA.
基金Sponsored by Optic-mechanical Integration Research and Design Technology Innovation Platform(20082108)
文摘Aimed at requirements, a kind of radar stabilized platform with external rotor and orthogonal shafts is designed. Its dynamic characters are analyzed by using finite element theory and ANSYS software. Also, a traditional stabilized platform with inner rotor is designed for comparison. It is shown that the new platform reduces two transmission links and 20% of precise components, its weight decreases by 20%, its natural frequency and rigidity are enlarged, the operating accuracy and stationary are increased. The new stabilized platform is more superiority and practicability. Its design method and analysis results have already been used in development mission. It provides helpful reference for similar structure designs.
基金Supported by the Technology Innovation Project of BIT(CX02016)
文摘To provide a good machining method in remanufacturing for the repaired parts with various forms, the design method of reconfigurable multi-process combined machining system and its implementation technology for remanufacturing are systematically proposed. The key technologies include reconfigurable structure design method of multi-process combined machining, man-machine coordination parameter programming and control system technology with self-maintenance function. A turn-milling machine tool based on this design method is developed. Natural frequency and corresponding vibration modes of the machine tool were analyzed by using both FEA and vibration test. Stiffness tests and machining experiments show that the rapid machining of most processes for the repaired work pieces can be successfully realized.
文摘An experimental program was undertaken to test the feasibility to detect the occurrence of structural damage using a modified mode shape difference technique. The vibration response of a steel beam fixed at one end and hinged at the other was obtained for the intact and damage conditions. Modal analysis was performed to extract the frequencies and mode shapes. The method shows a good potential in detection of occurrence and location of damage.
