Based on the Newton-Euler method, the dynamic behaviors of the left and right driving wheels and the robot body for the welding mobile robot were derived. In order to realize the combination control of body turning an...Based on the Newton-Euler method, the dynamic behaviors of the left and right driving wheels and the robot body for the welding mobile robot were derived. In order to realize the combination control of body turning and slider adjustment, the dynamic behaviors of sliders were also investigated. As a result, a systematic and complete dynamic model for the welding mobile robot was constructed. In order to verify the effectiveness of the above model, a sliding mode tracking control method was proposed and simulated, the lateral error stabilizes between -0.2 mm and ＋0.2 mm, and the total distance of travel for the slider is consistently within 4-2 ram. The simulation results verify the effectiveness of the established dynamic model and also show that the seam tracking controller based on the dynamic model has excellent performance in terms of stability and robustness. Furthermore, the model is found to be very suitable for practical applications of the welding mobile robot.展开更多
In view of the many scenes of unmanned aerial vehicle(UAV)detection,a third-party signal source is used to design a receiver to monitor the UAV.It is of great significance to understand the reflection of the signal il...In view of the many scenes of unmanned aerial vehicle(UAV)detection,a third-party signal source is used to design a receiver to monitor the UAV.It is of great significance to understand the reflection of the signal illuminating the UAV.Taking the communication base station(BS)signal as the third-party signal source,and considering the complete transmission link,reflection changes and loss fading of the communication signal,this study conducts model fitting for irregular UAV targets,simplifying complex targets into a combination of simple targets.Furthermore,the influence of the dielectric constant of the target surface and the signal irradiation angle on the signal reflection is analyzed.The analysis shows that the simulation results of this model fitting method are consistent with the results of other literature,which provides theoretical support for the detection of low and slow small targets such as UAVs.展开更多
A new aim-points-choosing model for attacking mobile missile systems in sector region is presented and realized in this paper. The model has the generality for attacking mobile target andis also useful for making an o...A new aim-points-choosing model for attacking mobile missile systems in sector region is presented and realized in this paper. The model has the generality for attacking mobile target andis also useful for making an operational decision.展开更多
An artificial immune system was modelled with self/non-self selection to overcome abnormity in a mobile robot demo. The immune modelling includes the innate immune modelling and the adaptive immune modelling. The self...An artificial immune system was modelled with self/non-self selection to overcome abnormity in a mobile robot demo. The immune modelling includes the innate immune modelling and the adaptive immune modelling. The self/non-self selection includes detection and recognition, and the self/non-self detection is based on the normal model of the demo. After the detection, the non-self recognition is based on learning unknown non-self for the adaptive immunization. The learning was designed on the neural network or on the learning mechanism from examples. The last step is elimination of all the non-self and failover of the demo. The immunization of the mobile robot demo is programmed with Java to test effectiveness of the approach. Some worms infected the mobile robot demo, and caused the abnormity. The results of the immunization simulations show that the immune program can detect 100% worms, recognize all known Worms and most unknown worms, and eliminate the worms. Moreover, the damaged files of the mobile robot demo can all be repaired through the normal model and immunization. Therefore, the immune modelling of the mobile robot demo is effective and programmable in some anti-worms and abnormity detection applications.展开更多
This work correlated the detailed work zone location and time data from the Wis LCS system with the five-min inductive loop detector data. One-sample percentile value test and two-sample Kolmogorov-Smirnov(K-S) test w...This work correlated the detailed work zone location and time data from the Wis LCS system with the five-min inductive loop detector data. One-sample percentile value test and two-sample Kolmogorov-Smirnov(K-S) test were applied to compare the speed and flow characteristics between work zone and non-work zone conditions. Furthermore, we analyzed the mobility characteristics of freeway work zones within the urban area of Milwaukee, WI, USA. More than 50% of investigated work zones have experienced speed reduction and 15%-30% is necessary reduced volumes. Speed reduction was more significant within and at the downstream of work zones than at the upstream.展开更多
To solve the seam tracking problem of mobile welding robot,a new controller based on the dynamics of mobile welding robot was designed using the method of backstepping kinematics into dynamics.A self-turning fuzzy con...To solve the seam tracking problem of mobile welding robot,a new controller based on the dynamics of mobile welding robot was designed using the method of backstepping kinematics into dynamics.A self-turning fuzzy controller and a fuzzy-Gaussian neural network(FGNN) controller were designed to complete coordinately controlling of cross-slider and wheels.The fuzzy-neural control algorithm was described by applying the Gaussian function and back propagation(BP) learning rule was used to tune the membership function in real time by applying the FGNN controller.To make the tracking more quickly and smoothly,the neural network controller based on dynamic model was designed,which utilized self-learning and self-adaptive ability of the neural network to deal with the partial uncertainty and the disturbances of the parameters of the robot dynamic model and real-time compensate the dynamics coupling.The results show that the selected control input torques make the system globally and asymptotically stable based on the Lyapunov function selected out;the accuracy of the proposed controller tracing is within ±0.4 mm and can satisfy the requirements of practical welding project.展开更多
For wireless ad hoc networks simulation, node＇s mobility pattern and traffic pattern are two key elements. A new simulation model is presented based on the virtual reality collision detection algorithm in obstacle en...For wireless ad hoc networks simulation, node＇s mobility pattern and traffic pattern are two key elements. A new simulation model is presented based on the virtual reality collision detection algorithm in obstacle environment, and the model uses the path planning method to avoid obstacles and to compute the node＇s moving path. Obstacles also affect node＇s signal propagation. Considering these factors, this study implements the mobility model for wireless ad hoc networks. Simulation results show that the model has a significant impact on the performance of protocols.展开更多
基金Project(50605044) supported by the National Natural Science Foundation of China Project(2004DFA02400) supported by the Key International Science and Technology Cooperation Program
文摘Based on the Newton-Euler method, the dynamic behaviors of the left and right driving wheels and the robot body for the welding mobile robot were derived. In order to realize the combination control of body turning and slider adjustment, the dynamic behaviors of sliders were also investigated. As a result, a systematic and complete dynamic model for the welding mobile robot was constructed. In order to verify the effectiveness of the above model, a sliding mode tracking control method was proposed and simulated, the lateral error stabilizes between -0.2 mm and ＋0.2 mm, and the total distance of travel for the slider is consistently within 4-2 ram. The simulation results verify the effectiveness of the established dynamic model and also show that the seam tracking controller based on the dynamic model has excellent performance in terms of stability and robustness. Furthermore, the model is found to be very suitable for practical applications of the welding mobile robot.
基金supported by the State Major Research and Development Project(2018YFB1802004)the State Key Laboratory of Air Traffic Management System and Technology(SKLATM201807)。
文摘In view of the many scenes of unmanned aerial vehicle(UAV)detection,a third-party signal source is used to design a receiver to monitor the UAV.It is of great significance to understand the reflection of the signal illuminating the UAV.Taking the communication base station(BS)signal as the third-party signal source,and considering the complete transmission link,reflection changes and loss fading of the communication signal,this study conducts model fitting for irregular UAV targets,simplifying complex targets into a combination of simple targets.Furthermore,the influence of the dielectric constant of the target surface and the signal irradiation angle on the signal reflection is analyzed.The analysis shows that the simulation results of this model fitting method are consistent with the results of other literature,which provides theoretical support for the detection of low and slow small targets such as UAVs.
文摘A new aim-points-choosing model for attacking mobile missile systems in sector region is presented and realized in this paper. The model has the generality for attacking mobile target andis also useful for making an operational decision.
基金Projects(60234030, 60404021) supported by the National Natural Science Foundation of China project(040125) supported by the Doctoral Research Grant of Central South University
文摘An artificial immune system was modelled with self/non-self selection to overcome abnormity in a mobile robot demo. The immune modelling includes the innate immune modelling and the adaptive immune modelling. The self/non-self selection includes detection and recognition, and the self/non-self detection is based on the normal model of the demo. After the detection, the non-self recognition is based on learning unknown non-self for the adaptive immunization. The learning was designed on the neural network or on the learning mechanism from examples. The last step is elimination of all the non-self and failover of the demo. The immunization of the mobile robot demo is programmed with Java to test effectiveness of the approach. Some worms infected the mobile robot demo, and caused the abnormity. The results of the immunization simulations show that the immune program can detect 100% worms, recognize all known Worms and most unknown worms, and eliminate the worms. Moreover, the damaged files of the mobile robot demo can all be repaired through the normal model and immunization. Therefore, the immune modelling of the mobile robot demo is effective and programmable in some anti-worms and abnormity detection applications.
基金Project(61620106002)supported by the National Natural Science Foundation of ChinaProject(2016YFB0100906)supported by the National Key R&D Program in China+1 种基金Project(2015364X16030)supported by the Information Technology Research Project of Ministry of Transport of ChinaProject(2242015K42132)supported by the Fundamental Sciences of Southeast University,China
文摘This work correlated the detailed work zone location and time data from the Wis LCS system with the five-min inductive loop detector data. One-sample percentile value test and two-sample Kolmogorov-Smirnov(K-S) test were applied to compare the speed and flow characteristics between work zone and non-work zone conditions. Furthermore, we analyzed the mobility characteristics of freeway work zones within the urban area of Milwaukee, WI, USA. More than 50% of investigated work zones have experienced speed reduction and 15%-30% is necessary reduced volumes. Speed reduction was more significant within and at the downstream of work zones than at the upstream.
基金Project(2007309) supported by the Scientific Research Project of Hebei Provincial Education Office,ChinaProject(2007AA04Z209) supported by the National High-Tech Research and Development Program of China
文摘To solve the seam tracking problem of mobile welding robot,a new controller based on the dynamics of mobile welding robot was designed using the method of backstepping kinematics into dynamics.A self-turning fuzzy controller and a fuzzy-Gaussian neural network(FGNN) controller were designed to complete coordinately controlling of cross-slider and wheels.The fuzzy-neural control algorithm was described by applying the Gaussian function and back propagation(BP) learning rule was used to tune the membership function in real time by applying the FGNN controller.To make the tracking more quickly and smoothly,the neural network controller based on dynamic model was designed,which utilized self-learning and self-adaptive ability of the neural network to deal with the partial uncertainty and the disturbances of the parameters of the robot dynamic model and real-time compensate the dynamics coupling.The results show that the selected control input torques make the system globally and asymptotically stable based on the Lyapunov function selected out;the accuracy of the proposed controller tracing is within ±0.4 mm and can satisfy the requirements of practical welding project.
文摘For wireless ad hoc networks simulation, node＇s mobility pattern and traffic pattern are two key elements. A new simulation model is presented based on the virtual reality collision detection algorithm in obstacle environment, and the model uses the path planning method to avoid obstacles and to compute the node＇s moving path. Obstacles also affect node＇s signal propagation. Considering these factors, this study implements the mobility model for wireless ad hoc networks. Simulation results show that the model has a significant impact on the performance of protocols.
基金This work was supported in part by the Foundation of Guangdong Educational Committee （2014KTSCX191） and the National Natural Science Foundation of China （61201087）.
