Aiming at the phenomenon of discrete variables whic h generally exists in engineering structural optimization, a novel hybrid genetic algorithm (HGA) is proposed to directly search the optimal solution in this pape r....Aiming at the phenomenon of discrete variables whic h generally exists in engineering structural optimization, a novel hybrid genetic algorithm (HGA) is proposed to directly search the optimal solution in this pape r. The imitative full-stress design method (IFS) was presented for discrete struct ural optimum design subjected to multi-constraints. To reach the imitative full -stress state for dangerous members was the target of IFS through iteration. IF S is integrated in the GA. The basic idea of HGA is to divide the optimization t ask into two complementary parts. The coarse, global optimization is done by the GA while local refinement is done by IFS. For instance, every K generations, th e population is doped with a locally optimal individual obtained from IFS. Both methods run in parallel. All or some of individuals are continuously used as initial values for IFS. The locally optimized individuals are re-implanted into the current generation in the GA. From some numeral examples, hybridizatio n has been discovered as enormous potential for improvement of genetic algorit hm. Selection is the component which guides the HGA to the solution by preferring in dividuals with high fitness over low-fitted ones. Selection can be deterministi c operation, but in most implementations it has random components. "Elite surviv al" is introduced to avoid that the observed best-fitted individual dies out, j ust by selecting it for the next generation without any random experiments. The individuals of population are competitive only in the same generation. There exists no competition among different generations. So HGA may be permitted to h ave different evaluation criteria for different generations. Multi-Selectio n schemes are adopted to avoid slow refinement since the individuals have si milar fitness values in the end phase of HGA. The feasibility of this method is tested with examples of engineering design wit h discrete variables. Results demonstrate the validity of HGA.展开更多
This paper presents a new hybrid genetic algorithm for the vertex cover problems in which scan-repair and local improvement techniques are used for local optimization. With the hybrid approach, genetic algorithms are ...This paper presents a new hybrid genetic algorithm for the vertex cover problems in which scan-repair and local improvement techniques are used for local optimization. With the hybrid approach, genetic algorithms are used to perform global exploration in a population, while neighborhood search methods are used to perform local exploitation around the chromosomes. The experimental results indicate that hybrid genetic algorithms can obtain solutions of excellent quality to the problem instances with different sizes. The pure genetic algorithms are outperformed by the neighborhood search heuristics procedures combined with genetic algorithms.展开更多
In this paper, a new implementation of genetic algorithms (GAs) is developed for the machine scheduling problem, which is abundant among the modern manufacturing systems. The performance measure of early and tardy com...In this paper, a new implementation of genetic algorithms (GAs) is developed for the machine scheduling problem, which is abundant among the modern manufacturing systems. The performance measure of early and tardy completion of jobs is very natural as one's aim, which is usually to minimize simultaneously both earliness and tardiness of all jobs. As the problem is NP-hard and no effective algorithms exist, we propose a hybrid genetic algorithms approach to deal with it. We adjust the crossover and mutation probabilities by fuzzy logic controller whereas the hybrid genetic algorithm does not require preliminary experiments to determine probabilities for genetic operators. The experimental results show the effectiveness of the GAs method proposed in the paper.展开更多
Disassembly sequence planning （DSP） plays a significant role in maintenance planning of the aircraft. It is used during the design stage for the analysis of maintainability of the aircraft. To solve product disassem...Disassembly sequence planning （DSP） plays a significant role in maintenance planning of the aircraft. It is used during the design stage for the analysis of maintainability of the aircraft. To solve product disassembly sequence planning problems efficiently, a product disassembly hybrid graph model, which describes the connection, non-connection and precedence relationships between the product parts, is established based on the characteristic of disassembly. Farther, the optimization model is provided to optimize disassembly sequence. And the solution methodology based on the genetic/simulated annealing algorithm with binaxy-tree algorithm is given. Finally, an example is analyzed in detail, and the result shows that the model is correct and efficient.展开更多
Background:Cotton is an important fiber crop worldwide.The yield potential of current genotypes of cotton can be exploited through hybridization.However,to develop superior hybrids with high yield and fiber quality tr...Background:Cotton is an important fiber crop worldwide.The yield potential of current genotypes of cotton can be exploited through hybridization.However,to develop superior hybrids with high yield and fiber quality traits,information of genetic control of traits is prerequisite.Therefore,genetic analysis plays pivotal role in plant breeding.Results:In present study,North Carolina II mating design was used to cross 5 female parents with 6 male parents to produce 30 intraspecific F1cotton hybrids.All plant materials were tested in three different ecological regions of China during the year of 2016-2017.Additive-dominance-environment(ADE)genetic model was used to estimate the genetic effects and genotypic and phenotypic correlation of yield and fiber quality traits.Results showed that yield traits except lint percentage were mainly controlled by genetic and environment interaction effects,whereas lint percentage and fiber quality traits were determined by main genetic effects.Moreover,dominant and additiveen vironine nt in teraction effects had more influence on yield traits,whereas additive and domi nance-e nviron ment interaction effects were found to be predominant for fiber traits.Broad-sense and its interaction heritability were significant for all yield and most of fiber quality traits.Narrow-sense and its interaction heritability were non-significant for boll number and seed cotton yield.Correlation analysis indicated that seed cotton yield had significant positive correlation with other yield attributes and non-significant with fiber quality traits.All fiber quality traits had signiflcant positive correlation with each other except micronaire.Conclusions:Results of current study provide important information about genetic control of yield and fiber quality traits.Further,this study identified that parental lines,e.g.,SJ48-1,ZB-1,851-2,and DT-8 can be utilized to improve yield and fiber quality traits in cotton.展开更多
文摘Aiming at the phenomenon of discrete variables whic h generally exists in engineering structural optimization, a novel hybrid genetic algorithm (HGA) is proposed to directly search the optimal solution in this pape r. The imitative full-stress design method (IFS) was presented for discrete struct ural optimum design subjected to multi-constraints. To reach the imitative full -stress state for dangerous members was the target of IFS through iteration. IF S is integrated in the GA. The basic idea of HGA is to divide the optimization t ask into two complementary parts. The coarse, global optimization is done by the GA while local refinement is done by IFS. For instance, every K generations, th e population is doped with a locally optimal individual obtained from IFS. Both methods run in parallel. All or some of individuals are continuously used as initial values for IFS. The locally optimized individuals are re-implanted into the current generation in the GA. From some numeral examples, hybridizatio n has been discovered as enormous potential for improvement of genetic algorit hm. Selection is the component which guides the HGA to the solution by preferring in dividuals with high fitness over low-fitted ones. Selection can be deterministi c operation, but in most implementations it has random components. "Elite surviv al" is introduced to avoid that the observed best-fitted individual dies out, j ust by selecting it for the next generation without any random experiments. The individuals of population are competitive only in the same generation. There exists no competition among different generations. So HGA may be permitted to h ave different evaluation criteria for different generations. Multi-Selectio n schemes are adopted to avoid slow refinement since the individuals have si milar fitness values in the end phase of HGA. The feasibility of this method is tested with examples of engineering design wit h discrete variables. Results demonstrate the validity of HGA.
基金This project was supported by the National Natural Science Foundation of China the Open Project Foundation of Comput-er Software New Technique National Key Laboratory of Nanjing University.
文摘This paper presents a new hybrid genetic algorithm for the vertex cover problems in which scan-repair and local improvement techniques are used for local optimization. With the hybrid approach, genetic algorithms are used to perform global exploration in a population, while neighborhood search methods are used to perform local exploitation around the chromosomes. The experimental results indicate that hybrid genetic algorithms can obtain solutions of excellent quality to the problem instances with different sizes. The pure genetic algorithms are outperformed by the neighborhood search heuristics procedures combined with genetic algorithms.
文摘In this paper, a new implementation of genetic algorithms (GAs) is developed for the machine scheduling problem, which is abundant among the modern manufacturing systems. The performance measure of early and tardy completion of jobs is very natural as one's aim, which is usually to minimize simultaneously both earliness and tardiness of all jobs. As the problem is NP-hard and no effective algorithms exist, we propose a hybrid genetic algorithms approach to deal with it. We adjust the crossover and mutation probabilities by fuzzy logic controller whereas the hybrid genetic algorithm does not require preliminary experiments to determine probabilities for genetic operators. The experimental results show the effectiveness of the GAs method proposed in the paper.
基金supported by the National High Technology Research and Development Program of China(2006AA04Z427).
文摘Disassembly sequence planning （DSP） plays a significant role in maintenance planning of the aircraft. It is used during the design stage for the analysis of maintainability of the aircraft. To solve product disassembly sequence planning problems efficiently, a product disassembly hybrid graph model, which describes the connection, non-connection and precedence relationships between the product parts, is established based on the characteristic of disassembly. Farther, the optimization model is provided to optimize disassembly sequence. And the solution methodology based on the genetic/simulated annealing algorithm with binaxy-tree algorithm is given. Finally, an example is analyzed in detail, and the result shows that the model is correct and efficient.
基金supported by National Key Research and Development Program of China(2016YFD0101400)
文摘Background:Cotton is an important fiber crop worldwide.The yield potential of current genotypes of cotton can be exploited through hybridization.However,to develop superior hybrids with high yield and fiber quality traits,information of genetic control of traits is prerequisite.Therefore,genetic analysis plays pivotal role in plant breeding.Results:In present study,North Carolina II mating design was used to cross 5 female parents with 6 male parents to produce 30 intraspecific F1cotton hybrids.All plant materials were tested in three different ecological regions of China during the year of 2016-2017.Additive-dominance-environment(ADE)genetic model was used to estimate the genetic effects and genotypic and phenotypic correlation of yield and fiber quality traits.Results showed that yield traits except lint percentage were mainly controlled by genetic and environment interaction effects,whereas lint percentage and fiber quality traits were determined by main genetic effects.Moreover,dominant and additiveen vironine nt in teraction effects had more influence on yield traits,whereas additive and domi nance-e nviron ment interaction effects were found to be predominant for fiber traits.Broad-sense and its interaction heritability were significant for all yield and most of fiber quality traits.Narrow-sense and its interaction heritability were non-significant for boll number and seed cotton yield.Correlation analysis indicated that seed cotton yield had significant positive correlation with other yield attributes and non-significant with fiber quality traits.All fiber quality traits had signiflcant positive correlation with each other except micronaire.Conclusions:Results of current study provide important information about genetic control of yield and fiber quality traits.Further,this study identified that parental lines,e.g.,SJ48-1,ZB-1,851-2,and DT-8 can be utilized to improve yield and fiber quality traits in cotton.
