This work aims to reveal the mechanical responses and energy evolution characteristics of skarn rock under constant amplitude-varied frequency loading paths.Testing results show that the fatigue lifetime,stress−strain...This work aims to reveal the mechanical responses and energy evolution characteristics of skarn rock under constant amplitude-varied frequency loading paths.Testing results show that the fatigue lifetime,stress−strain responses,deformation,energy dissipation and fracture morphology are all impacted by the loading rate.A pronounced influence of the loading rate on rock deformation is found,with slower loading rate eliciting enhanced strain development,alongside augmented energy absorption and dissipation.In addition,it is revealed that the loading rate and cyclic loading amplitude jointly influence the phase shift distribution,with accelerated rates leading to a narrower phase shift duration.It is suggested that lower loading rate leads to more significant energy dissipation.Finally,the tensile or shear failure modes were intrinsically linked to loading strategy,with cyclic loading predominantly instigating shear damage,as manifest in the increased presence of pulverized grain particles.This work would give new insights into the fortification of mining structures and the optimization of mining methodologies.展开更多
The mechanical properties of many materials prepared by additive manufacturing technology have been greatly improved.High strength is attributed to grain refinement,formation of high density dislocation and existence ...The mechanical properties of many materials prepared by additive manufacturing technology have been greatly improved.High strength is attributed to grain refinement,formation of high density dislocation and existence of cellular structures with nanoscale during manufacturing.In addition,the super-saturated solid solution of elements in the matrix and the solid solution segregation along the wall of the cellular structures also promote the improvement of strength by enhancing dislocation pinning.Hence,the existence of cellular structure in grains leads to differences in the prediction of material strength by Hall-Petch relationship,and there is no unified calculation method to determine the d value as grain size or cell size.In this work,representative materials including austenite 316L SS were printed by selective laser melting(SLM),and the strength was predicted.The values of cell size and grain size were substituted into Hall-Petch formula,and the results showed that the calculation error for 316L is increased from 4.1%to 11.9%.Therefore,it is concluded that the strength predicted by grain size is more accurate than that predicted by cell size in additive manufacturing materials.When calculating the yield strength of laser additive manufacturing metal materials through the Hall-Petch formula,the grain size should be used as the basis for calculation.展开更多
Constant envelope with a fractional Fourier transformorthogonal frequency division multiplexing(CE-FrFT-OFDM)is a special case of a constant envelope OFDM(CE-OFDM),both being energy efficient wireless communication te...Constant envelope with a fractional Fourier transformorthogonal frequency division multiplexing(CE-FrFT-OFDM)is a special case of a constant envelope OFDM(CE-OFDM),both being energy efficient wireless communication techniques with a 0 dB peak to average power ratio(PAPR).However,with the proper selection of fractional order,the first technique has a high bit error rate(BER)performance in the frequency-time selective channels.This paper performs further analysis of CE-FrFT-OFDM by examining its spectral efficiency(SE)and energy efficiency(EE)and compare to the famous OFDM and FrFT-OFDM techniques.Analytical and comprehensive simulations conducted show that,the CE-FrFT-OFDM has five times the EE of OFDM and FrFT-OFDM systems with a slightly less SE.Increasing CE-FrFT-OFDM’s transmission power by increasing its amplitude to 1.7 increases its SE to match that of the OFDM and FrFT-OFDM systems while slightly reducing its EE by 20%to be four times that of OFDM and FrFTOFDM systems.OFDM and FrFT-OFDM’s amplitude fluctuations cause rapid changing output back-off(OBO)power requirements and further reduce power amplifier(PA)efficiency while CE-FrFTOFDM stable operational linear range makes it a better candidate and outperforms the other techniques when their OBO exceeds 1.7.Higher EE and low BER in time-frequency selective channel are attracting features for CE-FrFT-OFDM deployment in mobile devices.展开更多
The Confucianism has played a prominent role for thousands of years in boosting the tenacity of the Chinese nation towards innovation and development as well as in promoting and inheriting the traditional Chinese cult...The Confucianism has played a prominent role for thousands of years in boosting the tenacity of the Chinese nation towards innovation and development as well as in promoting and inheriting the traditional Chinese culture. Based on the five constant virtues of Confucianism,this paper analyzes the relationship between "benevolence,righteousness,etiquette,wisdom and credit"and creditability that We Media should construct,and elaborates the construction of value dimension system of We Media's creditability on talents, environments,orientations and innovations from four aspects. Namely,the cognitive and spiritual orientations that reinforce the five constant virtues,the propaganda cultivation that fuses them and the endogenous impetus stimulated by using them as reference.This paper is designed to tell all of the media and media practitioners to constantly remain vigilant of the social responsibilities they are taking and the social value they should create.T hey should take an initiative to guide their serving objects to foster a proper consensus outlook and value and meeting the mass audience's demands and desires on information.展开更多
This work proposes constrained constant modulus unscented Kalman filter(CCM-UKF) algorithm and its low-complexity version called reduced-rank constrained constant modulus unscented Kalman filter(RR-CCM-UKF) algorithm ...This work proposes constrained constant modulus unscented Kalman filter(CCM-UKF) algorithm and its low-complexity version called reduced-rank constrained constant modulus unscented Kalman filter(RR-CCM-UKF) algorithm for blind adaptive beamforming. In the generalized sidelobe canceller(GSC) structure, the proposed algorithms are devised according to the CCM criterion. Firstly, the cost function of the constrained optimization problem is transformed to suit the Kalman filter-style state space model. Then, the optimum weight vector of the beamformer can be estimated by using the recursive formulas of UKF. In addition, the a priori parameters of UKF(system and measurement noises) are processed adaptively in the implementation. Simulation results demonstrate that the proposed algorithms outperform the existing methods in terms of convergence speeds, output signal-tointerference-plus-noise ratios(SINRs), mean-square deviations(MSDs) and robustness against steering mismatch.展开更多
Undoped and Na-doped ZnO films were deposited by sol-gel method.The effects of sodium incorporation on structure,surface morphology and optical constants of the films were investigated.X-ray diffraction patterns show ...Undoped and Na-doped ZnO films were deposited by sol-gel method.The effects of sodium incorporation on structure,surface morphology and optical constants of the films were investigated.X-ray diffraction patterns show the hexagonal wurtzite polycrystalline structure and that the sodium incorporation leads to the change in the structural characteristics of ZnO films.The SEM observations show that the surface morphology of the films is affected by the sodium incorporation.The transmission spectra show that the average transmittance of the films is above 85% in the visible range.The absorption edge initially blue-shifts and then red-shifts with the increase of Na doping content.The optical constants of these films were calculated using transmission spectra.Refractive indices of the films in the visible range decrease at first and then increase with increasing Na doping content.展开更多
The shear strength parameters for geotechnical designs are obtained mainly from consolidated drained （CD） or consolidated undrained （CU） triaxial tests. However, during construction, the excess pore-air pressure g...The shear strength parameters for geotechnical designs are obtained mainly from consolidated drained （CD） or consolidated undrained （CU） triaxial tests. However, during construction, the excess pore-air pressure generally dissipates instantaneously while the excess pore-water pressure dissipates with time. This condition needs to be simulated in a constant water content （CW） triaxial test. The study on Yunnan red clay is carried out to investigate the soil-water characteristics and the shear strength characteristics under the constant water content condition. Osmotic technique is used to obtain the soil-water characteristic curve. A series of CW triaxial tests are conducted on statically compacted specimens. The experimental results show that the soil-water characteristic curve has a low air entry value of 7 kPa due to large pores in non-uniform pore size distribution, and a high residual value exceeding 10 MPa. In addition, the initial degree of saturation and net confining stress play an important role in affecting the shear characteristics under the constant water content condition. Finally, a new semi-empirical shear strength model in terms of degree of saturation is proposed and then applied to Yuunan red clay. Simulation result shows that the model is capable of capturing some key features of soils. The model can be used in whole engineering practice range, covering both unsaturmed and saturated soils.展开更多
The dielectric constant(DC)is one of the key properties for detection of threat materials such as Improvised Explosive Devices(IEDs).In the present paper,the density functional theory(DFT)as well as ab-initio approach...The dielectric constant(DC)is one of the key properties for detection of threat materials such as Improvised Explosive Devices(IEDs).In the present paper,the density functional theory(DFT)as well as ab-initio approaches are used to explore effective methods to predict dielectric constants of a series of 12 energetic materials(EMs)for which experimental data needed to experimentally determine the dielectric constant(refractive indices)are available.These include military grades energetic materials,nitro and peroxide compounds,and the widely used nitroglycerin.Ab-initio and DFT calculations are conducted.In order to calculate dielectric constant values of materials,potential DFT functional combined with basis sets are considered for testing.Accuracy of the calculations are compared to experimental data listed in the scientific literature,and time required for calculations are both evaluated and discussed.The best functional/basis set combinations among those tested are CAM-B3LYP and AUG-ccpVDZm,which provide great results,with accuracy deviations below 5%when calculated results are compared to experimental data.展开更多
The purpose of this paper is to reduce the error when measuring high dielectric constant materials.In this paper,the reason why the error introduced is analyzed firstly.Then,with HFSS,the method of choosing the size o...The purpose of this paper is to reduce the error when measuring high dielectric constant materials.In this paper,the reason why the error introduced is analyzed firstly.Then,with HFSS,the method of choosing the size of cavity and the dimension of dielectric materials is proposed.And several error correction curves are provided for measuring high dielectric constant materials.Finally,the experiment is conducted to validate the feasibility of our analysis.展开更多
Constant weight code is an important error-correcting control code in communications. Basic structure of constant weight codes for some arriving at Johnson bound, A（n, 2u, w）, is presented. Some correlative property...Constant weight code is an important error-correcting control code in communications. Basic structure of constant weight codes for some arriving at Johnson bound, A（n, 2u, w）, is presented. Some correlative propertys of the codes, the solution of arriving at Johnson bound, and the results on the couple constant code and some constant weight codes are discussed. The conclusion is verified through four examples.展开更多
A new mulfitarget constant modulus array is proposed for CDMA systems based on least squares constant modulus algorithm. The new algorithm is called pre-despreading decision directed least squares constant modulus alg...A new mulfitarget constant modulus array is proposed for CDMA systems based on least squares constant modulus algorithm. The new algorithm is called pre-despreading decision directed least squares constant modulus algorithm （D-DDLSCMA）. In the new algorithm, the pre-despreading is first applied for multitarget arrays to remove some multiple access signals, then the despreaded signal is processed by the algorithm which united the constant modulus algorithm and decision directed method. Simulation results illustrate the good performance for the proposed algorithm.展开更多
Based on a uniform linear array, a new widely linear unscented Kalman filter-based constant modulus algorithm (WL-UKF-CMA) for blind adaptive beamforming is proposed. The new algorithm is designed according to the con...Based on a uniform linear array, a new widely linear unscented Kalman filter-based constant modulus algorithm (WL-UKF-CMA) for blind adaptive beamforming is proposed. The new algorithm is designed according to the constant modulus criterion and takes full advantage of the noncircular property of the signal of interest (SOI), significantly increasing the output signal-to interference-plus-noise ratio (SINR), enhancing the convergence speed and decreasing the steady-state misadjustment. Since it requires no known training data, the proposed algorithm saves a large amount of the available spectrum. Theoretical analysis and simulation results are presented to demonstrate its superiority over the conventional linear least mean square-based CMA (L-LMS-CMA), the conventional linear recursive least square-based CMA (L-RLS-CMA), WL-LMS-CMA, WL-RLS-CMA and L-UKF-CMA.展开更多
A model of constant probability event is constructed rigorously in event space of PSCEA. It is showed that the numericalbased fusion and the algebraicbased fusion have a consistent result when the weight is regarded a...A model of constant probability event is constructed rigorously in event space of PSCEA. It is showed that the numericalbased fusion and the algebraicbased fusion have a consistent result when the weight is regarded as a constant probability event. From the point of view of algebra, we present a novel similarity measure in product space. Based on the similarity degree, we use a similarity aggregation method to fusion experts' evaluation. We also give a numerical example to illustrate the method.展开更多
基金Project(52174069) supported by the National Natural Science Foundation of ChinaProject(8202033) supported by the Beijing Natural Science Foundation,ChinaProject(KCF2203) supported by the Henan Key Laboratory for Green and Efficient Mining&Comprehensive Utilization of Mineral Resources (Henan Polytechnic University),China。
文摘This work aims to reveal the mechanical responses and energy evolution characteristics of skarn rock under constant amplitude-varied frequency loading paths.Testing results show that the fatigue lifetime,stress−strain responses,deformation,energy dissipation and fracture morphology are all impacted by the loading rate.A pronounced influence of the loading rate on rock deformation is found,with slower loading rate eliciting enhanced strain development,alongside augmented energy absorption and dissipation.In addition,it is revealed that the loading rate and cyclic loading amplitude jointly influence the phase shift distribution,with accelerated rates leading to a narrower phase shift duration.It is suggested that lower loading rate leads to more significant energy dissipation.Finally,the tensile or shear failure modes were intrinsically linked to loading strategy,with cyclic loading predominantly instigating shear damage,as manifest in the increased presence of pulverized grain particles.This work would give new insights into the fortification of mining structures and the optimization of mining methodologies.
基金Projects(51505166,51871249)supported by the National Natural Science Foundation of ChinaProject(Guike AB19050002)supported by the Guangxi Key Research and Development Program,China+1 种基金Project(2020JJ2046)supported by the Hunan Science Fund for Distinguished Young Scholars,ChinaProject(2020WK2027)supported by the Hunan Key R&D Plan,China。
文摘The mechanical properties of many materials prepared by additive manufacturing technology have been greatly improved.High strength is attributed to grain refinement,formation of high density dislocation and existence of cellular structures with nanoscale during manufacturing.In addition,the super-saturated solid solution of elements in the matrix and the solid solution segregation along the wall of the cellular structures also promote the improvement of strength by enhancing dislocation pinning.Hence,the existence of cellular structure in grains leads to differences in the prediction of material strength by Hall-Petch relationship,and there is no unified calculation method to determine the d value as grain size or cell size.In this work,representative materials including austenite 316L SS were printed by selective laser melting(SLM),and the strength was predicted.The values of cell size and grain size were substituted into Hall-Petch formula,and the results showed that the calculation error for 316L is increased from 4.1%to 11.9%.Therefore,it is concluded that the strength predicted by grain size is more accurate than that predicted by cell size in additive manufacturing materials.When calculating the yield strength of laser additive manufacturing metal materials through the Hall-Petch formula,the grain size should be used as the basis for calculation.
文摘Constant envelope with a fractional Fourier transformorthogonal frequency division multiplexing(CE-FrFT-OFDM)is a special case of a constant envelope OFDM(CE-OFDM),both being energy efficient wireless communication techniques with a 0 dB peak to average power ratio(PAPR).However,with the proper selection of fractional order,the first technique has a high bit error rate(BER)performance in the frequency-time selective channels.This paper performs further analysis of CE-FrFT-OFDM by examining its spectral efficiency(SE)and energy efficiency(EE)and compare to the famous OFDM and FrFT-OFDM techniques.Analytical and comprehensive simulations conducted show that,the CE-FrFT-OFDM has five times the EE of OFDM and FrFT-OFDM systems with a slightly less SE.Increasing CE-FrFT-OFDM’s transmission power by increasing its amplitude to 1.7 increases its SE to match that of the OFDM and FrFT-OFDM systems while slightly reducing its EE by 20%to be four times that of OFDM and FrFTOFDM systems.OFDM and FrFT-OFDM’s amplitude fluctuations cause rapid changing output back-off(OBO)power requirements and further reduce power amplifier(PA)efficiency while CE-FrFTOFDM stable operational linear range makes it a better candidate and outperforms the other techniques when their OBO exceeds 1.7.Higher EE and low BER in time-frequency selective channel are attracting features for CE-FrFT-OFDM deployment in mobile devices.
基金the rusult of the project of the Five Constant Virtues of Confucianism and Value Dimension Construction of Mainstream’s Credibility(Sk2014A440)
文摘The Confucianism has played a prominent role for thousands of years in boosting the tenacity of the Chinese nation towards innovation and development as well as in promoting and inheriting the traditional Chinese culture. Based on the five constant virtues of Confucianism,this paper analyzes the relationship between "benevolence,righteousness,etiquette,wisdom and credit"and creditability that We Media should construct,and elaborates the construction of value dimension system of We Media's creditability on talents, environments,orientations and innovations from four aspects. Namely,the cognitive and spiritual orientations that reinforce the five constant virtues,the propaganda cultivation that fuses them and the endogenous impetus stimulated by using them as reference.This paper is designed to tell all of the media and media practitioners to constantly remain vigilant of the social responsibilities they are taking and the social value they should create.T hey should take an initiative to guide their serving objects to foster a proper consensus outlook and value and meeting the mass audience's demands and desires on information.
基金Project(61573113)supported by the National Natural Science Foundation of ChinaProject(2014RFXXJ074)supported by the Science and Technology Innovation Talents Research Fund of Harbin,China
文摘This work proposes constrained constant modulus unscented Kalman filter(CCM-UKF) algorithm and its low-complexity version called reduced-rank constrained constant modulus unscented Kalman filter(RR-CCM-UKF) algorithm for blind adaptive beamforming. In the generalized sidelobe canceller(GSC) structure, the proposed algorithms are devised according to the CCM criterion. Firstly, the cost function of the constrained optimization problem is transformed to suit the Kalman filter-style state space model. Then, the optimum weight vector of the beamformer can be estimated by using the recursive formulas of UKF. In addition, the a priori parameters of UKF(system and measurement noises) are processed adaptively in the implementation. Simulation results demonstrate that the proposed algorithms outperform the existing methods in terms of convergence speeds, output signal-tointerference-plus-noise ratios(SINRs), mean-square deviations(MSDs) and robustness against steering mismatch.
基金Project(50872001) supported by the National Natural Science Foundation of ChinaProject(20060357003) supported by Research Fund for the Doctoral Program of Higher Education of ChinaProject(KJ2010A284) supported by the Natural Science Foundation of Anhui Higher Education Institution of China
文摘Undoped and Na-doped ZnO films were deposited by sol-gel method.The effects of sodium incorporation on structure,surface morphology and optical constants of the films were investigated.X-ray diffraction patterns show the hexagonal wurtzite polycrystalline structure and that the sodium incorporation leads to the change in the structural characteristics of ZnO films.The SEM observations show that the surface morphology of the films is affected by the sodium incorporation.The transmission spectra show that the average transmittance of the films is above 85% in the visible range.The absorption edge initially blue-shifts and then red-shifts with the increase of Na doping content.The optical constants of these films were calculated using transmission spectra.Refractive indices of the films in the visible range decrease at first and then increase with increasing Na doping content.
基金Project(51068002) supported by the National Natural Science Foundation of ChinaProject(10-046-14-1) supported by Guangxi Key Laboratory of Geomechanics and Geotechnical Engineering,China
文摘The shear strength parameters for geotechnical designs are obtained mainly from consolidated drained （CD） or consolidated undrained （CU） triaxial tests. However, during construction, the excess pore-air pressure generally dissipates instantaneously while the excess pore-water pressure dissipates with time. This condition needs to be simulated in a constant water content （CW） triaxial test. The study on Yunnan red clay is carried out to investigate the soil-water characteristics and the shear strength characteristics under the constant water content condition. Osmotic technique is used to obtain the soil-water characteristic curve. A series of CW triaxial tests are conducted on statically compacted specimens. The experimental results show that the soil-water characteristic curve has a low air entry value of 7 kPa due to large pores in non-uniform pore size distribution, and a high residual value exceeding 10 MPa. In addition, the initial degree of saturation and net confining stress play an important role in affecting the shear characteristics under the constant water content condition. Finally, a new semi-empirical shear strength model in terms of degree of saturation is proposed and then applied to Yuunan red clay. Simulation result shows that the model is capable of capturing some key features of soils. The model can be used in whole engineering practice range, covering both unsaturmed and saturated soils.
文摘The dielectric constant(DC)is one of the key properties for detection of threat materials such as Improvised Explosive Devices(IEDs).In the present paper,the density functional theory(DFT)as well as ab-initio approaches are used to explore effective methods to predict dielectric constants of a series of 12 energetic materials(EMs)for which experimental data needed to experimentally determine the dielectric constant(refractive indices)are available.These include military grades energetic materials,nitro and peroxide compounds,and the widely used nitroglycerin.Ab-initio and DFT calculations are conducted.In order to calculate dielectric constant values of materials,potential DFT functional combined with basis sets are considered for testing.Accuracy of the calculations are compared to experimental data listed in the scientific literature,and time required for calculations are both evaluated and discussed.The best functional/basis set combinations among those tested are CAM-B3LYP and AUG-ccpVDZm,which provide great results,with accuracy deviations below 5%when calculated results are compared to experimental data.
文摘The purpose of this paper is to reduce the error when measuring high dielectric constant materials.In this paper,the reason why the error introduced is analyzed firstly.Then,with HFSS,the method of choosing the size of cavity and the dimension of dielectric materials is proposed.And several error correction curves are provided for measuring high dielectric constant materials.Finally,the experiment is conducted to validate the feasibility of our analysis.
文摘Constant weight code is an important error-correcting control code in communications. Basic structure of constant weight codes for some arriving at Johnson bound, A（n, 2u, w）, is presented. Some correlative propertys of the codes, the solution of arriving at Johnson bound, and the results on the couple constant code and some constant weight codes are discussed. The conclusion is verified through four examples.
文摘A new mulfitarget constant modulus array is proposed for CDMA systems based on least squares constant modulus algorithm. The new algorithm is called pre-despreading decision directed least squares constant modulus algorithm （D-DDLSCMA）. In the new algorithm, the pre-despreading is first applied for multitarget arrays to remove some multiple access signals, then the despreaded signal is processed by the algorithm which united the constant modulus algorithm and decision directed method. Simulation results illustrate the good performance for the proposed algorithm.
基金supported by the National Natural Science Foundation of China(61573113)the Harbin Science and Technology Innovation Talents(Excellent Discipline Leader)Research Fund(2014RFXXJ074)the National Scholarship([2016]3100)
文摘Based on a uniform linear array, a new widely linear unscented Kalman filter-based constant modulus algorithm (WL-UKF-CMA) for blind adaptive beamforming is proposed. The new algorithm is designed according to the constant modulus criterion and takes full advantage of the noncircular property of the signal of interest (SOI), significantly increasing the output signal-to interference-plus-noise ratio (SINR), enhancing the convergence speed and decreasing the steady-state misadjustment. Since it requires no known training data, the proposed algorithm saves a large amount of the available spectrum. Theoretical analysis and simulation results are presented to demonstrate its superiority over the conventional linear least mean square-based CMA (L-LMS-CMA), the conventional linear recursive least square-based CMA (L-RLS-CMA), WL-LMS-CMA, WL-RLS-CMA and L-UKF-CMA.
文摘A model of constant probability event is constructed rigorously in event space of PSCEA. It is showed that the numericalbased fusion and the algebraicbased fusion have a consistent result when the weight is regarded as a constant probability event. From the point of view of algebra, we present a novel similarity measure in product space. Based on the similarity degree, we use a similarity aggregation method to fusion experts' evaluation. We also give a numerical example to illustrate the method.
基金Supported by National Natural Science Committee and Chinese Engineering Physics Institute Foundation(10576013)Natural Science Foundation of Henan Province(0611053200)Natural Science Study Foundation of Henan University(06YBZR028)
