Lithium-ion batteries(LIBs)are an electrochemical energy storage technology that has been widely used for portable electrical devices,electric vehicles,and grid storage,etc.To satisfy the demand for user convenience e...Lithium-ion batteries(LIBs)are an electrochemical energy storage technology that has been widely used for portable electrical devices,electric vehicles,and grid storage,etc.To satisfy the demand for user convenience especially for electric vehicles,the development of a fast-charging technology for LIBs has become a critical focus.In commercial LIBs,the slow kinetics of Li+intercalation into the graphite anode from the electrolyte solution is known as the main restriction for fast-charging.We summarize the recent advances in obtaining fast-charging graphite-based anodes,mainly involving modifications of the electrolyte solution and graphite anode.Specifically,strategies for increasing the ionic conductivity and regulating the Li+solvation/desolvation state in the electrolyte solution,as well as optimizing the fabrication and the intrinsic activity of graphite-based anodes are discussed in detail.This review considers practical ways to obtain fast Li+intercalation kinetics into a graphite anode from the electrolyte as well as analysing progress in the commercialization of fast-charging LIBs.展开更多
High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production meth...High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.展开更多
CeO_(2) based semiconductor are widely used in solar-driven photothermal catalytic dry reforming of methane(DRM)reaction,but still suffer from low activity and low light utilization efficiency.This study developed gra...CeO_(2) based semiconductor are widely used in solar-driven photothermal catalytic dry reforming of methane(DRM)reaction,but still suffer from low activity and low light utilization efficiency.This study developed graphite-CeO_(2) interfaces to enhance solar-driven photothermal catalytic DRM.Compared with carbon nanotubes-modified CeO_(2)(CeO_(2)-CNT),graphite-modified CeO_(2)(CeO_(2)-GRA)constructed graphite-CeO_(2) interfaces with distortion in CeO_(2),leading to the formation abundant oxygen vacancies.These graphite-CeO_(2) interfaces with oxygen vacancies enhanced optical absorption and promoted the generation and separation of photogenerated carriers.The high endothermic capacity of graphite elevated the catalyst surface temperature from 592.1−691.3℃,boosting light-to-thermal conversion.The synergy between photogenerated carriers and localized heat enabled Ni/CeO_(2)-GRA to achieve a CO production rate of 9985.6 mmol/(g·h)(vs 7192.4 mmol/(g·h)for Ni/CeO_(2))and a light-to-fuel efficiency of 21.8%(vs 13.8%for Ni/CeO_(2)).This work provides insights for designing graphite-semiconductor interfaces to advance photothermal catalytic efficiency.展开更多
Magnesium potassium phosphate cement(MKPC)coatings exhibit potential for carbon steel protection but face challenges in practical application due to the preparation process and properties.This study develops flake gra...Magnesium potassium phosphate cement(MKPC)coatings exhibit potential for carbon steel protection but face challenges in practical application due to the preparation process and properties.This study develops flake graphite(FG)-modified MKPC coatings via spraying process,investigating the effects of FG size and dosage on phase composition,microstructure,mechanical properties,corrosion protection,and thermal conductivity.Results show that a low FG dosage(5 wt%)synergistically optimizes multifunctional performance.Compared to unmodified MKPC,FG2-1 exhibited exceptional impact resistance,associated with a 57%reduction in corrosion current density(icorr),a 356.3% increase in low-frequency impedance modulus(Z_(0.01 Hz))and a 37% increase in thermal conductivity.However,the coating with a high FG dosage(15 wt%)degraded performance due to defect accumulation and reduced crystallinity of KMgPO_(4)·6H_(2)O.This work advances the rational design of multifunctional inorganic coatings for extreme service environments requiring coupled corrosion protection and thermal management.展开更多
The advancement of planar micro-supercapacitors(PMSCs)for micro-electromechanical systems(MEMS)has been significantly hindered by the challenge of achieving high energy and power densities.This study addresses this is...The advancement of planar micro-supercapacitors(PMSCs)for micro-electromechanical systems(MEMS)has been significantly hindered by the challenge of achieving high energy and power densities.This study addresses this issue by leveraging screen-printing technology to fabricate high-performance PMSCs using innovative composite ink.The ink,a synergistic blend of few-layer graphene(Gt),carbon black(CB),and NiCo_(2)O_(4),was meticulously mixed to form a conductive and robust coating that enhanced the capacitive performance of the PMSCs.The optimized ink formulation and printing process result in a micro-supercapacitor with an exceptional areal capacitance of 18.95 mF/cm^(2)and an areal energy density of 2.63μW·h/cm^(2)at a current density of 0.05 mA/cm^(2),along with an areal power density of 0.025 mW/cm^(2).The devices demonstrated impressive durability with a capacitance retention rate of 94.7%after a stringent 20000-cycle test,demonstrating their potential for long-term applications.Moreover,the PMSCs displayed excellent mechanical flexibility,with a capacitance decrease of only 3.43%after 5000 bending cycles,highlighting their suitability for flexible electronic devices.The ease of integrating these PMSCs into series and parallel configurations for customized power further underscores their practicality for integrated power supply solutions in various technologies.展开更多
Cycling and rate performance of natural graphite is still limited by the sluggish kinetics of lithium ions,which can be improved by surface modifications in previous research.Among these methods,amorphous carbon coati...Cycling and rate performance of natural graphite is still limited by the sluggish kinetics of lithium ions,which can be improved by surface modifications in previous research.Among these methods,amorphous carbon coating has been proved to be mature and efficient.However,the significance of coating uniformity in relation to solid electrolyte interphase(SEI)has been largely overlooked.In this study,the uniformity of amorphous carbon coating is adjusted by the particle size of pitch.When discharged-charged at 1 C,graphite half-cells with such uniform coating show 90.3%of the capacity at 0.1 C,while that is 82.1%for non-uniform coating.Additionally,improved initial coulombic efficiency and cycling stability are demonstrated.These can be attributed to graphite anodes featuring a uniform carbon coating that promotes effective and homogeneous LiF formation within the inorganic matrix.This leads to the establishment of a stabilized SEI,confirmed by time-of-flight secondary ion mass spectrometry(TOF-SIMS).This work provides valuable reference into the rational control of graphite interfaces for high electrochemical performance.展开更多
Graphite oxide(GO) was prepared by the pressurized oxidation method and incorporated into polyimide(PI) matrix to fabricate high-k composite films by in-situ polymerization and subsequent thermal treatment. The result...Graphite oxide(GO) was prepared by the pressurized oxidation method and incorporated into polyimide(PI) matrix to fabricate high-k composite films by in-situ polymerization and subsequent thermal treatment. The results show that the as-prepared GO had good dispersion and compatibility in PI matrix due to the introduction of abundant oxygen-containing functional groups during the oxidation. The residual graphitic domains and the thermal treatment induced reduction of GO further enhanced the dielectric permittivity of the resulting GO–PI composites. The dielectric permittivity of the GO–PI composites exhibited a typical percolation behavior with a percolation threshold of 0.0347 of volume ratio and a critical exponent of 0.837. Near the percolation threshold, the dielectric permittivity of the GO–PI composite increased to 108 at 10~2 Hz and was 26 times that of the pure PI.展开更多
A dense ZrC coating with the thickness of 130 μm is prepared on graphite by reactive melt infiltration.XRD and SEM analyses show that the phase composition of the coating is ZrC and it adheres well with the substrate...A dense ZrC coating with the thickness of 130 μm is prepared on graphite by reactive melt infiltration.XRD and SEM analyses show that the phase composition of the coating is ZrC and it adheres well with the substrate.The influence of ZrC coating on mechanical properties of the graphite was investigated by compression tests and the results show that after the coating process,the compression strength of the coated sample is improved by 13.64% as compared with graphite sample.The improvement of the compression strength for ZrC coated sample can be associated to the increased density and the ZrC particle reinforcement due to the infiltration and reaction of the melted Zr with carbon substrate in the coating process.展开更多
Graphite is naturally floatable due to its hydrophobic pro pe rty and also soft and smears on other gangue particles, rendering the gangue mor e or less floatable too. Due to this reason it is important to concentrate...Graphite is naturally floatable due to its hydrophobic pro pe rty and also soft and smears on other gangue particles, rendering the gangue mor e or less floatable too. Due to this reason it is important to concentrate on ar eas such as suitable flotation reagents, depression agents, pH modifiers, and pa rticle size to be fed during the process. The paper surveys and analyses the sui table particle size to be fed to achieve high-grade concentrate. According to t h e work carried out the author suggested the ideal cost effective flotation f low sheet for improved results at Bogala Mines in Sri Lanka.展开更多
A novel polyaniline-graphite composite film glucose oxidase （PGCF GOD） electrode was developed. The PGCF was synthesized by cyclic voitammetry method in 0.5 mol/L H2SO4 solution containing 1 g/L graphite powder and ...A novel polyaniline-graphite composite film glucose oxidase （PGCF GOD） electrode was developed. The PGCF was synthesized by cyclic voitammetry method in 0.5 mol/L H2SO4 solution containing 1 g/L graphite powder and 0.2 mol/L aniline. The PGCF GOD electrode was prepared by doping GOD into the composite film. The morphology of the PGCF and the response property of the PGCF GOD electrode were investigated by scanning electron microscopy and electrochemical measurement, respectively. The results show that the PGCF has a porous and netty structure and the PGCF GOD electrode has excellent response property such as high sensitivity and short response time. Influences of pH value, temperature, glucose concentration and potential on the response current of the electrode were also discussed. The sensor has a maximum steady-state current density of 357.17μA/cm2 and an apparent Michaelis-Menten constant of 16.57 mmol/L. The maximum current response of the enzyme electrode occurs under the condition ofpH 5.5, 0.8 V and 65℃.展开更多
The graphite was modified using pitch through dynamical melt-carbonization, and the effects of modification temperature and the amount of pitch on the characteristics of graphite were investigated. The structure and c...The graphite was modified using pitch through dynamical melt-carbonization, and the effects of modification temperature and the amount of pitch on the characteristics of graphite were investigated. The structure and characteristics of the graphite were determined by X-ray diffractometry(XRD), scanning electron microscopy(SEM), particle size analysis and electrochemical measurements. The results show that the modified graphite has a disordered carbon/graphite composite structure, larger average particle diameter, greater tap density, and better electrochemical characteristics than the untreated graphite. The sample coated with 10% pitch dynamical melt-carbonized at 400 ℃ for 3 h and heat-treated at 850 ℃ for 2 h has better electrochemical performances with a reversible capacity of 360.5 mA·h/g, a irreversible capacity of 41.0 mA·h/g, and an initial coulombic efficiency of 89.8% compared with natural graphite and disordered carbon. The cycling stability of the Li/C cell with modified graphite as anodes is improved, and its capacity retention ratio at the 30th cycle is up to 94.37%.展开更多
The graphite was modified by mild oxidation, and the effects of modification temperature and soaking time on the characteristics of graphite were investigated. The structure and characteristics of the graphite were de...The graphite was modified by mild oxidation, and the effects of modification temperature and soaking time on the characteristics of graphite were investigated. The structure and characteristics of the graphite were determined by X-ray diffraction, scanning electron microscopy, BET surface area, particle size analysis and electrochemical measurements. The results show that the modified graphite has a better-developed crystallite structure, larger average particle diameter, smaller surface area, and better electrochemical characteristics than the untrented graphite. The sample mild-oxidized at 600℃ for 3h has the best electrochemical performances with a reversible capacity of 304.5mA·h/g, a irreversible capacity of 66.4mA·h/g, and a initial coulombic efficiency of 82.1%. The charge/discharge properties and a cycling stability of the prototype lithium ion batteries with modified graphite as anodes are improved. Its capacity retention ratio at the 200th cycle is enhanced from 66.75% to 90.15%.展开更多
To improve the solid lubricity on the worn surface of frictional-pairs, a convenient and simple brush-painting technique was utilized to prepare the solid lubrication graphite coatings. The bonding between the coating...To improve the solid lubricity on the worn surface of frictional-pairs, a convenient and simple brush-painting technique was utilized to prepare the solid lubrication graphite coatings. The bonding between the coatings and substrate is good. To examine the influence of the different graphite contents on the tribological properties of the graphite coatings, the comparison experiments were carried out on the ring-on-block friction tester. The tribological results show a change law of saddle-shape between the tribological properties of graphite coatings and graphite content. When the amount of graphite is up to 28g, the tribological properties of graphite coating are the best. The excellent anti-friction of the graphite coating is associated with the close-packed hexagonal crystal structure of graphite.展开更多
The core components of HTR mainly consist of graphite,which is an excellent solid moderating material and structure material with good irradiation performance.However,graphite is easier to be oxidized at high temperat...The core components of HTR mainly consist of graphite,which is an excellent solid moderating material and structure material with good irradiation performance.However,graphite is easier to be oxidized at high temperature.It is important to improve the anti-oxidation performance of graphite substrate to enhance the safety of HTR.Anti-oxidation coating has been proved that it can effectively improve the oxidation resistance of graphite substrate.The selection of coating includes the coating materials system and the preparation techniques.In addition,attention also should be paid to the anti-oxidation mechanism.SiC based coating system is most commonly used in HTR and some other coating systems such as zirconium compounds coating,noble metal coating also can be used in nuclear.However,some coating systems are not suitable in HTR because the elements contained cannot be used in high irradiation environment.The emphasis is on the antioxidant mechanism of different coating systems.Some anti-oxidation coating techniques for graphite substrate are also reviewed in this paper,such as PC,CVD,PS and slurry.Finally,the existing problems of the oxidation resistance coating are proposed and an outlook is made for the development of the protection coating system for graphite substrate used in nuclear.展开更多
Co3O4/graphite composites were synthesized by precipitation of cobalt oxalate on the surface of graphite and pyrolysis of the precipitate, and the effects of graphite content and calcination temperature on the electro...Co3O4/graphite composites were synthesized by precipitation of cobalt oxalate on the surface of graphite and pyrolysis of the precipitate, and the effects of graphite content and calcination temperature on the electrochemical properties of the composites were investigated. The samples were characterized by thermogravimetry and differential thermal analysis （TG/DTA）, X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, cyclic voltammetry （CV）, electrochemical impedance spectroscopy （EIS） and charge/discharge measurements. With increasing the graphite content, the reversible capacity of the Co3O4/graphite composites decreases, while cycling stability improves dramatically, and the addition of graphite obviously decreases the average potential of lithium intercalation/deintercalation. The reversible capacity of the composites with 50% graphite rises from 583 to 725 mA-h/g as the calcination temperature increases from 300 to 500 ℃, and the Co304/graphite composites synthesized at 400 ℃ show the best cycling stability without capacity loss in the initial 20 cycles. peaks, corresponding to the lithium intercalaction/deintercalation for The CV profile of the composite presents two couples of redox graphite and Co3O4, respectively. EIS studies indicate that the electrochemical impedance decreases with increasing the graphite content.展开更多
Oxygen-free copper and pre-metalized graphite were brazed using CuNiSnP braze alloy by high frequency induction heating method. Interracial microstructures and reaction phases were analyzed by scanning electron micros...Oxygen-free copper and pre-metalized graphite were brazed using CuNiSnP braze alloy by high frequency induction heating method. Interracial microstructures and reaction phases were analyzed by scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDS）. The strength and resistance of the joints were tested. It is found that when the brazing parameters are optimized, the structures of the joints are graphite/（Cu,Ni）/Ni（s.s）＋NixPy/Cu3P＋Cu（s.s） （including Sn）＋eutectic structures （Cu3P＋Ni3P＋Cu（s.s）/Cu （s.s）/Cu）. When the temperature increases to 750℃ or the holding time prolongs to 300 s, the eutectie structures disappear and the amount of Cu3P increases. The maximum shear strength of the joints is 5.2 MPa, which fracture at the interface of graphite and metallization. The resistance of the joints is no more than 5 mΩ.展开更多
A new method of manufacturing micro-flow channels on graphite composite bipolar plate(GCBPP) microplaning using specially designed multi-tooth tool is proposed. In this method, several or even dozens of parallel micro...A new method of manufacturing micro-flow channels on graphite composite bipolar plate(GCBPP) microplaning using specially designed multi-tooth tool is proposed. In this method, several or even dozens of parallel micro-flow channels ranging from 100 μm to 500 μm in width can be produced simultaneously. But, edge chippings easily occur on the rib surface of GCBPP during microplaning due to brittleness of graphite composites. Experimental results show that edge chippings result in the increase of contact resistance between bipolar plate and carbon paper at low compaction force. While the edge chippings scarcely exert influence on the contact resistance at high compaction force. Contrary to conventional view, the edge chippings can significantly improve performance of microfuel cell and big edge chippings outperform small edge chippings. In addition, the influence of technical parameters on edge chippings was investigated in order to obtain big, but not oversized edge chippings.展开更多
Graphite and graphite-like materials widely are present at black shale and magmatic ores. The nature of these carbon materials (CM) is multifarious. In what cause connects a mineralization with carbon. The great numbe...Graphite and graphite-like materials widely are present at black shale and magmatic ores. The nature of these carbon materials (CM) is multifarious. In what cause connects a mineralization with carbon. The great numbers of parameters, namely, the temperature, the pressure, the shear stress, the catalytic species, the host-rock lithology, the time and etc., have an influence on the graphitization process. Accumulations of gold and platinum group elements in black graphite shale and extraction of these metals from rocks depend in considerable degree from structural properties of CM. Raman spectroscopy has wide applied for various carbon modifications, including nano-structuring materials. The first and second-order Raman spectrum have been correlated with changes in the structure of graphite. There is a linear relationship between temperature and Raman R2 and R1 parameters (derived from the area and intensity of the defect band (D) relative to the ordered graphite band (G), respectively). The purpose of the present study is to characterize the rocks and CM from carbon-rich rocks of gold-ore deposits of the black-shale formation and magmatic ores using micro-Raman spectroscopy technique (Horiba Jobin Ivon LabRam spectrometer). Exciting was performed with 325 nm line of He-Cd laser. The graphite and graphite-like samples from many ore deposits of Russia and Kazahstan are investigations. R1 and R2 ratio indicate variable degree of organisation CM in the samples. The results show different spectral variations of CM with metamorphic grade: the well-ordered graphite from magmatic rocks, more - ordered and the disordered less graphitized CM from black-shale ores. For the first time in the world practice the Raman spectroscopy technique has been applied to determine the temperature of graphitizing for CM at gold-ore deposits of the black-shale formation. The temperatures obtained on carboniferous substance for the gold deposits range from 405°С to 280°С. Temperature of CM formation from Pt-low sulphide ores of the Talnakh deposit ranges from 4700C to 6500C. It has been shown that the carbon-rich phases from black-shale and magmatic rocks have various degrees of graphitization and different carbon forms.展开更多
Graphite nanoplatelets were prepared by a novel magnetic-grinding method using self-made equipments. Under a variant magnetic field, magnetic needles collided at a high rotating speed and exfoliated pristine graphite ...Graphite nanoplatelets were prepared by a novel magnetic-grinding method using self-made equipments. Under a variant magnetic field, magnetic needles collided at a high rotating speed and exfoliated pristine graphite into graphite nanoplatelets with high efficiency. The obtained graphite nanoplatelets are highly crystalline, and the thickness is less than 10 nm. Moreover, the surface area could reached 738.1 m^2/g with a grinding time of 4 h. Silanized graphite nanoplatelets can disperse well in SG 15W-40 engine oil and serve as lubricant additive. Tribological results indicate that the friction coefficient and wear-scar of the friction pairs are lower than 76% and 41%, respectively, by adding 1.5‰(mass fraction) of silanized graphite nanoplatelets. Notably, the functionalized graphite nanoplatelets can realize large-scale production and commercial application.展开更多
文摘Lithium-ion batteries(LIBs)are an electrochemical energy storage technology that has been widely used for portable electrical devices,electric vehicles,and grid storage,etc.To satisfy the demand for user convenience especially for electric vehicles,the development of a fast-charging technology for LIBs has become a critical focus.In commercial LIBs,the slow kinetics of Li+intercalation into the graphite anode from the electrolyte solution is known as the main restriction for fast-charging.We summarize the recent advances in obtaining fast-charging graphite-based anodes,mainly involving modifications of the electrolyte solution and graphite anode.Specifically,strategies for increasing the ionic conductivity and regulating the Li+solvation/desolvation state in the electrolyte solution,as well as optimizing the fabrication and the intrinsic activity of graphite-based anodes are discussed in detail.This review considers practical ways to obtain fast Li+intercalation kinetics into a graphite anode from the electrolyte as well as analysing progress in the commercialization of fast-charging LIBs.
基金Natural Science Foundation of Shanghai(24ZR1400800)he Natural Science Foundation of China(U23A20685,52073058,91963204)+1 种基金the National Key R&D Program of China(2021YFB3701400)Shanghai Sailing Program(23YF1400200)。
文摘High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.
文摘CeO_(2) based semiconductor are widely used in solar-driven photothermal catalytic dry reforming of methane(DRM)reaction,but still suffer from low activity and low light utilization efficiency.This study developed graphite-CeO_(2) interfaces to enhance solar-driven photothermal catalytic DRM.Compared with carbon nanotubes-modified CeO_(2)(CeO_(2)-CNT),graphite-modified CeO_(2)(CeO_(2)-GRA)constructed graphite-CeO_(2) interfaces with distortion in CeO_(2),leading to the formation abundant oxygen vacancies.These graphite-CeO_(2) interfaces with oxygen vacancies enhanced optical absorption and promoted the generation and separation of photogenerated carriers.The high endothermic capacity of graphite elevated the catalyst surface temperature from 592.1−691.3℃,boosting light-to-thermal conversion.The synergy between photogenerated carriers and localized heat enabled Ni/CeO_(2)-GRA to achieve a CO production rate of 9985.6 mmol/(g·h)(vs 7192.4 mmol/(g·h)for Ni/CeO_(2))and a light-to-fuel efficiency of 21.8%(vs 13.8%for Ni/CeO_(2)).This work provides insights for designing graphite-semiconductor interfaces to advance photothermal catalytic efficiency.
基金National Key Research and Development Program of China(2024YFB3714804)National Natural Science Foundation of China(52171277)+1 种基金Baima Lake Laboratory Joint Funds of the Zhejiang Provincial Natural Science Foundation of China(LBMHZ24E020001)Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(2022SZ-TD006).
文摘Magnesium potassium phosphate cement(MKPC)coatings exhibit potential for carbon steel protection but face challenges in practical application due to the preparation process and properties.This study develops flake graphite(FG)-modified MKPC coatings via spraying process,investigating the effects of FG size and dosage on phase composition,microstructure,mechanical properties,corrosion protection,and thermal conductivity.Results show that a low FG dosage(5 wt%)synergistically optimizes multifunctional performance.Compared to unmodified MKPC,FG2-1 exhibited exceptional impact resistance,associated with a 57%reduction in corrosion current density(icorr),a 356.3% increase in low-frequency impedance modulus(Z_(0.01 Hz))and a 37% increase in thermal conductivity.However,the coating with a high FG dosage(15 wt%)degraded performance due to defect accumulation and reduced crystallinity of KMgPO_(4)·6H_(2)O.This work advances the rational design of multifunctional inorganic coatings for extreme service environments requiring coupled corrosion protection and thermal management.
基金supported by the Shanxi Province Central Guidance Fund for Local Science and Technology Development Project(YDZJSX2024D030)the National Natural Science Foundation of China(22075197,22278290)+2 种基金the Shanxi Province Key Research and Development Program Project(2021020660301013)the Shanxi Provincial Natural Science Foundation of China(202103021224079)the Research and Development Project of Key Core and Common Technology of Shanxi Province(20201102018).
文摘The advancement of planar micro-supercapacitors(PMSCs)for micro-electromechanical systems(MEMS)has been significantly hindered by the challenge of achieving high energy and power densities.This study addresses this issue by leveraging screen-printing technology to fabricate high-performance PMSCs using innovative composite ink.The ink,a synergistic blend of few-layer graphene(Gt),carbon black(CB),and NiCo_(2)O_(4),was meticulously mixed to form a conductive and robust coating that enhanced the capacitive performance of the PMSCs.The optimized ink formulation and printing process result in a micro-supercapacitor with an exceptional areal capacitance of 18.95 mF/cm^(2)and an areal energy density of 2.63μW·h/cm^(2)at a current density of 0.05 mA/cm^(2),along with an areal power density of 0.025 mW/cm^(2).The devices demonstrated impressive durability with a capacitance retention rate of 94.7%after a stringent 20000-cycle test,demonstrating their potential for long-term applications.Moreover,the PMSCs displayed excellent mechanical flexibility,with a capacitance decrease of only 3.43%after 5000 bending cycles,highlighting their suitability for flexible electronic devices.The ease of integrating these PMSCs into series and parallel configurations for customized power further underscores their practicality for integrated power supply solutions in various technologies.
基金Project(52377220)supported by the National Natural Science Foundation of ChinaProject(kq2208265)supported by the Natural Science Foundation of Changsha,Hunan Province,ChinaProject supported by State Key Laboratory of Powder Metallurgy(Central South University,Changsha,China)。
文摘Cycling and rate performance of natural graphite is still limited by the sluggish kinetics of lithium ions,which can be improved by surface modifications in previous research.Among these methods,amorphous carbon coating has been proved to be mature and efficient.However,the significance of coating uniformity in relation to solid electrolyte interphase(SEI)has been largely overlooked.In this study,the uniformity of amorphous carbon coating is adjusted by the particle size of pitch.When discharged-charged at 1 C,graphite half-cells with such uniform coating show 90.3%of the capacity at 0.1 C,while that is 82.1%for non-uniform coating.Additionally,improved initial coulombic efficiency and cycling stability are demonstrated.These can be attributed to graphite anodes featuring a uniform carbon coating that promotes effective and homogeneous LiF formation within the inorganic matrix.This leads to the establishment of a stabilized SEI,confirmed by time-of-flight secondary ion mass spectrometry(TOF-SIMS).This work provides valuable reference into the rational control of graphite interfaces for high electrochemical performance.
基金Project(2013JSJJ002)supported by the Faculty Research Fund of Central South University,China
文摘Graphite oxide(GO) was prepared by the pressurized oxidation method and incorporated into polyimide(PI) matrix to fabricate high-k composite films by in-situ polymerization and subsequent thermal treatment. The results show that the as-prepared GO had good dispersion and compatibility in PI matrix due to the introduction of abundant oxygen-containing functional groups during the oxidation. The residual graphitic domains and the thermal treatment induced reduction of GO further enhanced the dielectric permittivity of the resulting GO–PI composites. The dielectric permittivity of the GO–PI composites exhibited a typical percolation behavior with a percolation threshold of 0.0347 of volume ratio and a critical exponent of 0.837. Near the percolation threshold, the dielectric permittivity of the GO–PI composite increased to 108 at 10~2 Hz and was 26 times that of the pure PI.
基金Project(51304249)supported by the National Natural Science Foundation of ChinaProject(14JJ3023)supported by Hunan Provincial Science Foundation of China+3 种基金Project(2011CB605801)supported by the National Basic Research Program of ChinaProjects(2012M511752,2013T607767)supported by the China Postdoctoral Science FoundationProject(2012QNZT004)supported by the Fundamental Research Funds for the Central Universities of ChinaProject supported by the Freedom Explore Program of Central South University,China
文摘A dense ZrC coating with the thickness of 130 μm is prepared on graphite by reactive melt infiltration.XRD and SEM analyses show that the phase composition of the coating is ZrC and it adheres well with the substrate.The influence of ZrC coating on mechanical properties of the graphite was investigated by compression tests and the results show that after the coating process,the compression strength of the coated sample is improved by 13.64% as compared with graphite sample.The improvement of the compression strength for ZrC coated sample can be associated to the increased density and the ZrC particle reinforcement due to the infiltration and reaction of the melted Zr with carbon substrate in the coating process.
文摘Graphite is naturally floatable due to its hydrophobic pro pe rty and also soft and smears on other gangue particles, rendering the gangue mor e or less floatable too. Due to this reason it is important to concentrate on ar eas such as suitable flotation reagents, depression agents, pH modifiers, and pa rticle size to be fed during the process. The paper surveys and analyses the sui table particle size to be fed to achieve high-grade concentrate. According to t h e work carried out the author suggested the ideal cost effective flotation f low sheet for improved results at Bogala Mines in Sri Lanka.
基金Projects(50473022, 20673036) supported by the National Natural Science Foundation of China project(2005) supported by the State Key Laboratory of Chemo/Biosensing and Chemometrics of China+1 种基金 project(2006FJ4100) supported by the Science Technology Project of Hunan Province project(2006) supported by the Postdoctor Foundation of Hunan University
文摘A novel polyaniline-graphite composite film glucose oxidase （PGCF GOD） electrode was developed. The PGCF was synthesized by cyclic voitammetry method in 0.5 mol/L H2SO4 solution containing 1 g/L graphite powder and 0.2 mol/L aniline. The PGCF GOD electrode was prepared by doping GOD into the composite film. The morphology of the PGCF and the response property of the PGCF GOD electrode were investigated by scanning electron microscopy and electrochemical measurement, respectively. The results show that the PGCF has a porous and netty structure and the PGCF GOD electrode has excellent response property such as high sensitivity and short response time. Influences of pH value, temperature, glucose concentration and potential on the response current of the electrode were also discussed. The sensor has a maximum steady-state current density of 357.17μA/cm2 and an apparent Michaelis-Menten constant of 16.57 mmol/L. The maximum current response of the enzyme electrode occurs under the condition ofpH 5.5, 0.8 V and 65℃.
基金Project(50302016) supported by the National Natural Science Foundation of China
文摘The graphite was modified using pitch through dynamical melt-carbonization, and the effects of modification temperature and the amount of pitch on the characteristics of graphite were investigated. The structure and characteristics of the graphite were determined by X-ray diffractometry(XRD), scanning electron microscopy(SEM), particle size analysis and electrochemical measurements. The results show that the modified graphite has a disordered carbon/graphite composite structure, larger average particle diameter, greater tap density, and better electrochemical characteristics than the untreated graphite. The sample coated with 10% pitch dynamical melt-carbonized at 400 ℃ for 3 h and heat-treated at 850 ℃ for 2 h has better electrochemical performances with a reversible capacity of 360.5 mA·h/g, a irreversible capacity of 41.0 mA·h/g, and an initial coulombic efficiency of 89.8% compared with natural graphite and disordered carbon. The cycling stability of the Li/C cell with modified graphite as anodes is improved, and its capacity retention ratio at the 30th cycle is up to 94.37%.
基金Project (2002 87) surported by Key Problem Study Plan of Science and Technology of Hunan Province
文摘The graphite was modified by mild oxidation, and the effects of modification temperature and soaking time on the characteristics of graphite were investigated. The structure and characteristics of the graphite were determined by X-ray diffraction, scanning electron microscopy, BET surface area, particle size analysis and electrochemical measurements. The results show that the modified graphite has a better-developed crystallite structure, larger average particle diameter, smaller surface area, and better electrochemical characteristics than the untrented graphite. The sample mild-oxidized at 600℃ for 3h has the best electrochemical performances with a reversible capacity of 304.5mA·h/g, a irreversible capacity of 66.4mA·h/g, and a initial coulombic efficiency of 82.1%. The charge/discharge properties and a cycling stability of the prototype lithium ion batteries with modified graphite as anodes are improved. Its capacity retention ratio at the 200th cycle is enhanced from 66.75% to 90.15%.
文摘To improve the solid lubricity on the worn surface of frictional-pairs, a convenient and simple brush-painting technique was utilized to prepare the solid lubrication graphite coatings. The bonding between the coatings and substrate is good. To examine the influence of the different graphite contents on the tribological properties of the graphite coatings, the comparison experiments were carried out on the ring-on-block friction tester. The tribological results show a change law of saddle-shape between the tribological properties of graphite coatings and graphite content. When the amount of graphite is up to 28g, the tribological properties of graphite coating are the best. The excellent anti-friction of the graphite coating is associated with the close-packed hexagonal crystal structure of graphite.
基金Project(ZX06901)supported by National S&T Major Project of ChinaProject(21671116)supported by the National Natural Science Foundation of China
文摘The core components of HTR mainly consist of graphite,which is an excellent solid moderating material and structure material with good irradiation performance.However,graphite is easier to be oxidized at high temperature.It is important to improve the anti-oxidation performance of graphite substrate to enhance the safety of HTR.Anti-oxidation coating has been proved that it can effectively improve the oxidation resistance of graphite substrate.The selection of coating includes the coating materials system and the preparation techniques.In addition,attention also should be paid to the anti-oxidation mechanism.SiC based coating system is most commonly used in HTR and some other coating systems such as zirconium compounds coating,noble metal coating also can be used in nuclear.However,some coating systems are not suitable in HTR because the elements contained cannot be used in high irradiation environment.The emphasis is on the antioxidant mechanism of different coating systems.Some anti-oxidation coating techniques for graphite substrate are also reviewed in this paper,such as PC,CVD,PS and slurry.Finally,the existing problems of the oxidation resistance coating are proposed and an outlook is made for the development of the protection coating system for graphite substrate used in nuclear.
基金Project(2007CB613607) supported by the National Basic Research Program of China Projects(2009FJ1002, 2009CK3062) supported by the Science and Technology Program of Hunan Province, China
文摘Co3O4/graphite composites were synthesized by precipitation of cobalt oxalate on the surface of graphite and pyrolysis of the precipitate, and the effects of graphite content and calcination temperature on the electrochemical properties of the composites were investigated. The samples were characterized by thermogravimetry and differential thermal analysis （TG/DTA）, X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, cyclic voltammetry （CV）, electrochemical impedance spectroscopy （EIS） and charge/discharge measurements. With increasing the graphite content, the reversible capacity of the Co3O4/graphite composites decreases, while cycling stability improves dramatically, and the addition of graphite obviously decreases the average potential of lithium intercalation/deintercalation. The reversible capacity of the composites with 50% graphite rises from 583 to 725 mA-h/g as the calcination temperature increases from 300 to 500 ℃, and the Co304/graphite composites synthesized at 400 ℃ show the best cycling stability without capacity loss in the initial 20 cycles. peaks, corresponding to the lithium intercalaction/deintercalation for The CV profile of the composite presents two couples of redox graphite and Co3O4, respectively. EIS studies indicate that the electrochemical impedance decreases with increasing the graphite content.
基金Project(50705022) supported by the National Natural Science Foundation of ChinaProject supported by the Program for New Century Excellent Talents in University
文摘Oxygen-free copper and pre-metalized graphite were brazed using CuNiSnP braze alloy by high frequency induction heating method. Interracial microstructures and reaction phases were analyzed by scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDS）. The strength and resistance of the joints were tested. It is found that when the brazing parameters are optimized, the structures of the joints are graphite/（Cu,Ni）/Ni（s.s）＋NixPy/Cu3P＋Cu（s.s） （including Sn）＋eutectic structures （Cu3P＋Ni3P＋Cu（s.s）/Cu （s.s）/Cu）. When the temperature increases to 750℃ or the holding time prolongs to 300 s, the eutectie structures disappear and the amount of Cu3P increases. The maximum shear strength of the joints is 5.2 MPa, which fracture at the interface of graphite and metallization. The resistance of the joints is no more than 5 mΩ.
基金Project(51075155)supported by the National Natural Science Foundation of ChinaProject(2013ZZ017)supported by the Fundamental Research Funds for the Central Universities,China
文摘A new method of manufacturing micro-flow channels on graphite composite bipolar plate(GCBPP) microplaning using specially designed multi-tooth tool is proposed. In this method, several or even dozens of parallel micro-flow channels ranging from 100 μm to 500 μm in width can be produced simultaneously. But, edge chippings easily occur on the rib surface of GCBPP during microplaning due to brittleness of graphite composites. Experimental results show that edge chippings result in the increase of contact resistance between bipolar plate and carbon paper at low compaction force. While the edge chippings scarcely exert influence on the contact resistance at high compaction force. Contrary to conventional view, the edge chippings can significantly improve performance of microfuel cell and big edge chippings outperform small edge chippings. In addition, the influence of technical parameters on edge chippings was investigated in order to obtain big, but not oversized edge chippings.
文摘Graphite and graphite-like materials widely are present at black shale and magmatic ores. The nature of these carbon materials (CM) is multifarious. In what cause connects a mineralization with carbon. The great numbers of parameters, namely, the temperature, the pressure, the shear stress, the catalytic species, the host-rock lithology, the time and etc., have an influence on the graphitization process. Accumulations of gold and platinum group elements in black graphite shale and extraction of these metals from rocks depend in considerable degree from structural properties of CM. Raman spectroscopy has wide applied for various carbon modifications, including nano-structuring materials. The first and second-order Raman spectrum have been correlated with changes in the structure of graphite. There is a linear relationship between temperature and Raman R2 and R1 parameters (derived from the area and intensity of the defect band (D) relative to the ordered graphite band (G), respectively). The purpose of the present study is to characterize the rocks and CM from carbon-rich rocks of gold-ore deposits of the black-shale formation and magmatic ores using micro-Raman spectroscopy technique (Horiba Jobin Ivon LabRam spectrometer). Exciting was performed with 325 nm line of He-Cd laser. The graphite and graphite-like samples from many ore deposits of Russia and Kazahstan are investigations. R1 and R2 ratio indicate variable degree of organisation CM in the samples. The results show different spectral variations of CM with metamorphic grade: the well-ordered graphite from magmatic rocks, more - ordered and the disordered less graphitized CM from black-shale ores. For the first time in the world practice the Raman spectroscopy technique has been applied to determine the temperature of graphitizing for CM at gold-ore deposits of the black-shale formation. The temperatures obtained on carboniferous substance for the gold deposits range from 405°С to 280°С. Temperature of CM formation from Pt-low sulphide ores of the Talnakh deposit ranges from 4700C to 6500C. It has been shown that the carbon-rich phases from black-shale and magmatic rocks have various degrees of graphitization and different carbon forms.
基金Project(ZR2011BL005)supported by the Natural Science Foundation of Shandong Province,China
文摘Graphite nanoplatelets were prepared by a novel magnetic-grinding method using self-made equipments. Under a variant magnetic field, magnetic needles collided at a high rotating speed and exfoliated pristine graphite into graphite nanoplatelets with high efficiency. The obtained graphite nanoplatelets are highly crystalline, and the thickness is less than 10 nm. Moreover, the surface area could reached 738.1 m^2/g with a grinding time of 4 h. Silanized graphite nanoplatelets can disperse well in SG 15W-40 engine oil and serve as lubricant additive. Tribological results indicate that the friction coefficient and wear-scar of the friction pairs are lower than 76% and 41%, respectively, by adding 1.5‰(mass fraction) of silanized graphite nanoplatelets. Notably, the functionalized graphite nanoplatelets can realize large-scale production and commercial application.
