Variable speed pumped storage machines are used extensively in wind power plant and pumped storage power plant. This paper presents direct torque and flux control(DTFC) of a variable speed pumped storage power plant(V...Variable speed pumped storage machines are used extensively in wind power plant and pumped storage power plant. This paper presents direct torque and flux control(DTFC) of a variable speed pumped storage power plant(VSPSP). By this method both torque and flux have been applied to control the VSPSP. The comparison between VSPSP's control strategies is studied. At the first, a wind turbine with the capacity 2.2 k W and DTFC control strategies simulated then a 250 MW VSPSP is simulated with all of its parts(including electrical, mechanical, hydraulic and its control system) by MATLAB software. In all of simulations, both converters including two-level voltage source converter(2LVSC) and three-level voltage source converter(3LVSC) are applied. The results of applying 2LVSC and 3LVSC are the rapid dynamic responses with better efficiency, reducing the total harmonic distortion(THD) and ripple of rotor torque and flux.展开更多
A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was anal...A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was analyzed and the model of wound-field synchronous electric machine was established. The change of field current of the electric machine was described mathematically for simplified exciter and rotate rectifier. Based on the traditional field control, the flux linkage compensation was introduced in d-axis current to counteract the flux ripple. Some simulation and preliminary experiments were implemented. The results show that the proposed method is feasible and effective.展开更多
单边短初级长次级直线感应电机己普遍应用于低速磁悬浮的驱动系统。由于在动态纵向边端效应影响下等效电路不对称，单边直线感应电机（single-sided linear inductionmotor，SLIM）的一些参数非线性变化。传统的应用于旋转电机的无速度...单边短初级长次级直线感应电机己普遍应用于低速磁悬浮的驱动系统。由于在动态纵向边端效应影响下等效电路不对称，单边直线感应电机（single-sided linear inductionmotor，SLIM）的一些参数非线性变化。传统的应用于旋转电机的无速度传感器方法不再适用。首先分析了SLIM的M／T轴等效电路，选择次级磁链作为速度观测器状态变量。根据李雅普诺夫系统稳定性判据，推导出适用于SLIM的无速度传感器辨识；然后，采用反馈广义积分观测器控制稳态辨识速度的双幅脉振幅值；引入虚拟期望变量（virtualdesiredvariable，VDV）法，利用估算速度参与SLIM的恒滑差频率矢量控制。仿真与实验对所提控制算法的有效性和实用性进行了验证，所得结论可为磁悬浮的无速度传感器控制提供参考。展开更多
单相开路故障的五相永磁同步电机(permanent-magnet synchronous motor,PMSM)采用有限集模型预测转矩和磁链控制(finite-control-set model predictive torque and flux control,FCS-MPTFC)策略,存在转矩脉动大、价值函数的权重系数整...单相开路故障的五相永磁同步电机(permanent-magnet synchronous motor,PMSM)采用有限集模型预测转矩和磁链控制(finite-control-set model predictive torque and flux control,FCS-MPTFC)策略,存在转矩脉动大、价值函数的权重系数整定困难、迭代计算量大以及共模电压(commonmode voltage,CMV)高等问题。为此,该文提出一种简化FCS-MPTFC策略。首先,建立五相PMSM在单相开路故障情况下的数学模型,并分析CMV产生的机理。其次,以抑制3次谐波电流的原则合成等幅值虚拟电压矢量(virtual voltage vector,V^(3)),并将转矩和磁链价值函数等效转化为电压价值函数,同时采用无差拍控制思想计算出参考电压矢量,进而通过合理划分扇区,直接获得最优V^(3)。最后,选择方向相反的两个基电压矢量代替零矢量,以减小开路故障下的CMV。仿真和实验结果表明:所提控制策略不仅能抑制单相开路故障导致的转矩脉动、降低计算负荷和CMV、抑制电流谐波,而且具有优良的稳态和动态性能。展开更多
A method of improving the stability of multiple-motor drive system fed by a 3-leg single inverter has been devised that employs the averages and differences of estimated parameters for field-oriented control. The para...A method of improving the stability of multiple-motor drive system fed by a 3-leg single inverter has been devised that employs the averages and differences of estimated parameters for field-oriented control. The parameters of each motor (stator current, rotor flux, and speed) are estimated using adaptive rotor flux observers to achieve sensorless control. The validity and effective of the proposed method have been demonstrated through simulations and experiments.展开更多
现有对双馈风电机组低电压穿越(low voltage ride through,LVRT)的研究中,主要的LVRT措施为投入撬棒保护电路,但该措施较为单一和被动,并且风机还需要吸收一定的无功,因此风机系统难以取得良好的LVRT性能。针对这一问题,提出一种含线性...现有对双馈风电机组低电压穿越(low voltage ride through,LVRT)的研究中,主要的LVRT措施为投入撬棒保护电路,但该措施较为单一和被动,并且风机还需要吸收一定的无功,因此风机系统难以取得良好的LVRT性能。针对这一问题,提出一种含线性自抗扰控制(linear active disturbance rejection control,LADRC)的定、转子侧协同LVRT策略。定子侧采用串联动态阻抗以抑制转子电流升高;网侧变流器采用LADRC提高直流侧母线电压的抗扰能力,并为转子侧变流器附加控制策略创造良好的工作条件。针对不同程度的电压跌落,转子侧变流器分别采用无功补偿和磁链主动衰减的控制策略以优化LVRT期间的无功输出能力。在考虑相位跳变的基础上,分析了采用LADRC以及定、转子侧协同LVRT策略下的双馈风机短路特性,并对短路电流进行了解析。最后,通过仿真验证了该协同LVRT策略的有效性以及短路电流解析式的正确性。展开更多
基金the output of a research project (Title: Application of Doubly Fed Asynchronous machine in Pumped Storage Hydropower Plant in Generate Mode, supported by Islamic Azad University South Tehran Branch)
文摘Variable speed pumped storage machines are used extensively in wind power plant and pumped storage power plant. This paper presents direct torque and flux control(DTFC) of a variable speed pumped storage power plant(VSPSP). By this method both torque and flux have been applied to control the VSPSP. The comparison between VSPSP's control strategies is studied. At the first, a wind turbine with the capacity 2.2 k W and DTFC control strategies simulated then a 250 MW VSPSP is simulated with all of its parts(including electrical, mechanical, hydraulic and its control system) by MATLAB software. In all of simulations, both converters including two-level voltage source converter(2LVSC) and three-level voltage source converter(3LVSC) are applied. The results of applying 2LVSC and 3LVSC are the rapid dynamic responses with better efficiency, reducing the total harmonic distortion(THD) and ripple of rotor torque and flux.
基金Sponsored by the NSFC General Project (51177135)the Key Project of Natural Science Foundation of Shaanxi Province (2011GZ013)
文摘A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was analyzed and the model of wound-field synchronous electric machine was established. The change of field current of the electric machine was described mathematically for simplified exciter and rotate rectifier. Based on the traditional field control, the flux linkage compensation was introduced in d-axis current to counteract the flux ripple. Some simulation and preliminary experiments were implemented. The results show that the proposed method is feasible and effective.
文摘单边短初级长次级直线感应电机己普遍应用于低速磁悬浮的驱动系统。由于在动态纵向边端效应影响下等效电路不对称，单边直线感应电机（single-sided linear inductionmotor，SLIM）的一些参数非线性变化。传统的应用于旋转电机的无速度传感器方法不再适用。首先分析了SLIM的M／T轴等效电路，选择次级磁链作为速度观测器状态变量。根据李雅普诺夫系统稳定性判据，推导出适用于SLIM的无速度传感器辨识；然后，采用反馈广义积分观测器控制稳态辨识速度的双幅脉振幅值；引入虚拟期望变量（virtualdesiredvariable，VDV）法，利用估算速度参与SLIM的恒滑差频率矢量控制。仿真与实验对所提控制算法的有效性和实用性进行了验证，所得结论可为磁悬浮的无速度传感器控制提供参考。
文摘单相开路故障的五相永磁同步电机(permanent-magnet synchronous motor,PMSM)采用有限集模型预测转矩和磁链控制(finite-control-set model predictive torque and flux control,FCS-MPTFC)策略,存在转矩脉动大、价值函数的权重系数整定困难、迭代计算量大以及共模电压(commonmode voltage,CMV)高等问题。为此,该文提出一种简化FCS-MPTFC策略。首先,建立五相PMSM在单相开路故障情况下的数学模型,并分析CMV产生的机理。其次,以抑制3次谐波电流的原则合成等幅值虚拟电压矢量(virtual voltage vector,V^(3)),并将转矩和磁链价值函数等效转化为电压价值函数,同时采用无差拍控制思想计算出参考电压矢量,进而通过合理划分扇区,直接获得最优V^(3)。最后,选择方向相反的两个基电压矢量代替零矢量,以减小开路故障下的CMV。仿真和实验结果表明:所提控制策略不仅能抑制单相开路故障导致的转矩脉动、降低计算负荷和CMV、抑制电流谐波,而且具有优良的稳态和动态性能。
文摘A method of improving the stability of multiple-motor drive system fed by a 3-leg single inverter has been devised that employs the averages and differences of estimated parameters for field-oriented control. The parameters of each motor (stator current, rotor flux, and speed) are estimated using adaptive rotor flux observers to achieve sensorless control. The validity and effective of the proposed method have been demonstrated through simulations and experiments.
文摘现有对双馈风电机组低电压穿越(low voltage ride through,LVRT)的研究中,主要的LVRT措施为投入撬棒保护电路,但该措施较为单一和被动,并且风机还需要吸收一定的无功,因此风机系统难以取得良好的LVRT性能。针对这一问题,提出一种含线性自抗扰控制(linear active disturbance rejection control,LADRC)的定、转子侧协同LVRT策略。定子侧采用串联动态阻抗以抑制转子电流升高;网侧变流器采用LADRC提高直流侧母线电压的抗扰能力,并为转子侧变流器附加控制策略创造良好的工作条件。针对不同程度的电压跌落,转子侧变流器分别采用无功补偿和磁链主动衰减的控制策略以优化LVRT期间的无功输出能力。在考虑相位跳变的基础上,分析了采用LADRC以及定、转子侧协同LVRT策略下的双馈风机短路特性,并对短路电流进行了解析。最后,通过仿真验证了该协同LVRT策略的有效性以及短路电流解析式的正确性。
