期刊文献+
共找到2,556篇文章
< 1 2 128 >
每页显示 20 50 100
Convex Optimization Algorithms for Cooperative Localization in Autonomous Underwater Vehicles 被引量:9
1
作者 LIU Ming-Yong LI Wen-Bai PEI Xuan 《自动化学报》 EI CSCD 北大核心 2010年第5期704-710,共7页
In this paper,a cooperative localization algorithm for autonomous underwater vehicles(AUVs)is proposed.A"parallel"model is adopted to describe the cooperative localization problem instead of the traditional&... In this paper,a cooperative localization algorithm for autonomous underwater vehicles(AUVs)is proposed.A"parallel"model is adopted to describe the cooperative localization problem instead of the traditional"leader-follower"model,and a linear programming associated with convex optimization method is used to deal with the problem.After an unknown-but-bounded model for sensor noise is assumed,bearing and range measurements can be modeled as linear constraints on the configuration space of the AUVs.Merging these constraints induces a convex polyhedron representing the set of all configurations consistent with the sensor measurements.Estimates for the uncertainty in the position of a single AUV or the relative positions of two or more nodes can then be obtained by projecting this polyhedron onto appropriate subspaces of the configuration space.Two different optimization algorithms are given to recover the uncertainty region according to the number of the AUVs.Simulation results are presented for a typical localization example of the AUV formation.The results show that our positioning method offers a good localization accuracy,although a small number of low-cost sensors are needed for each vehicle,and this validates that it is an economical and practical positioning approach compared with the traditional approach. 展开更多
关键词 Autonomous underwater vehicle(AUV) convex optimization cooperative localization uncertainty region screening algorithm approximation algorithm
在线阅读 下载PDF
High speed robust image registration and localization using optimized algorithm and its performances evaluation 被引量:13
2
作者 Meng An Zhiguo Jiang Danpei Zhao 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2010年第3期520-526,共7页
Local invariant algorithm applied in downward-looking image registration,usually computes the camera's pose relative to visual landmarks.Generally,there are three requirements in the process of image registration ... Local invariant algorithm applied in downward-looking image registration,usually computes the camera's pose relative to visual landmarks.Generally,there are three requirements in the process of image registration when using these approaches.First,the algorithm is apt to be influenced by illumination.Second,algorithm should have less computational complexity.Third,the depth information of images needs to be estimated without other sensors.This paper investigates a famous local invariant feature named speeded up robust feature(SURF),and proposes a highspeed and robust image registration and localization algorithm based on it.With supports from feature tracking and pose estimation methods,the proposed algorithm can compute camera poses under different conditions of scale,viewpoint and rotation so as to precisely localize object's position.At last,the study makes registration experiment by scale invariant feature transform(SIFT),SURF and the proposed algorithm,and designs a method to evaluate their performances.Furthermore,this study makes object retrieval test on remote sensing video.For there is big deformation on remote sensing frames,the registration algorithm absorbs the Kanade-Lucas-Tomasi(KLT)3-D coplanar calibration feature tracker methods,which can localize interesting targets precisely and efficiently.The experimental results prove that the proposed method has a higher localization speed and lower localization error rate than traditional visual simultaneous localization and mapping(vSLAM)in a period of time. 展开更多
关键词 local invariant features speeded up robust feature(SURF) Harris corner Kanada-Lucas-Tomasi(KLT)transform Coplanar camera calibration algorithm landmarks.
在线阅读 下载PDF
Immune evolutionary algorithms with domain knowledge for simultaneous localization and mapping 被引量:4
3
作者 李枚毅 蔡自兴 《Journal of Central South University of Technology》 EI 2006年第5期529-535,共7页
Immune evolutionary algorithms with domain knowledge were presented to solve the problem of simultaneous localization and mapping for a mobile robot in unknown environments. Two operators with domain knowledge were de... Immune evolutionary algorithms with domain knowledge were presented to solve the problem of simultaneous localization and mapping for a mobile robot in unknown environments. Two operators with domain knowledge were designed in algorithms, where the feature of parallel line segments without the problem of data association was used to construct a vaccination operator, and the characters of convex vertices in polygonal obstacle were extended to develop a pulling operator of key point grid. The experimental results of a real mobile robot show that the computational expensiveness of algorithms designed is less than other evolutionary algorithms for simultaneous localization and mapping and the maps obtained are very accurate. Because immune evolutionary algorithms with domain knowledge have some advantages, the convergence rate of designed algorithms is about 44% higher than those of other algorithms. 展开更多
关键词 immune evolutionary algorithms simultaneous localization and mapping domain knowledge
在线阅读 下载PDF
Hybrid ToA and IMU indoor localization system by various algorithms 被引量:4
4
作者 CHEN Xue-chen CHU Sheng +1 位作者 LI Fan CHU Guang 《Journal of Central South University》 SCIE EI CAS CSCD 2019年第8期2281-2294,共14页
In this paper, we integrate inertial navigation system (INS) with wireless sensor network (WSN) to enhance the accuracy of indoor localization. Inertial measurement unit (IMU), the core of the INS, measures the accele... In this paper, we integrate inertial navigation system (INS) with wireless sensor network (WSN) to enhance the accuracy of indoor localization. Inertial measurement unit (IMU), the core of the INS, measures the accelerated and angular rotated speed of moving objects. Meanwhile, the ranges from the object to beacons, which are sensor nodes with known coordinates, are collected by time of arrival (ToA) approach. These messages are simultaneously collected and transmitted to the terminal. At the terminal, we set up the state transition models and observation models. According to them, several recursive Bayesian algorithms are applied to producing position estimations. As shown in the experiments, all of three algorithms do not require constant moving speed and perform better than standalone ToA system or standalone IMU system. And within them, two algorithms can be applied for the tracking on any path which is not restricted by the requirement that the trajectory between the positions at two consecutive time steps is a straight line. 展开更多
关键词 indoor localization time of arrival (ToA) inertial measurement unit (IMU) Bayesian filter extended Kalman filter MAP algorithm
在线阅读 下载PDF
Symmetric Workpiece Localization Algorithms: Convergence and Improvements 被引量:2
5
作者 CHEN Shan-Yong LI Sheng-Yi DAI Yi-Fan 《自动化学报》 EI CSCD 北大核心 2006年第3期428-432,共5页
Symmetric workpiece localization algorithms combine alternating optimization and linearization. The iterative variables are partitioned into two groups. Then simple optimization approaches can be employed for each sub... Symmetric workpiece localization algorithms combine alternating optimization and linearization. The iterative variables are partitioned into two groups. Then simple optimization approaches can be employed for each subset of variables, where optimization of configuration variables is simplified as a linear least-squares problem (LSP). Convergence of current symmetric localization algorithms is discussed firstly. It is shown that simply taking the solution of the LSP as start of the next iteration may result in divergence or incorrect convergence. Therefore in our enhanced algorithms, line search is performed along the solution of the LSP in order to find a better point reducing the value of objective function. We choose this point as start of the next iteration. Better convergence is verified by numerical simulation. Besides, imposing boundary constraints on the LSP proves to be another efficient way. 展开更多
关键词 对称加工件 局限性 线性搜索 收敛性
在线阅读 下载PDF
Distributed localization for anchor-free sensor networks 被引量:9
6
作者 Cui Xunxue Shan Zhiguan Liu Jianjun 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2008年第3期405-418,共14页
Geographic location of nodes is very useful in a sensor network. Previous localization algorithms assume that there exist some anchor nodes in this kind of network, and then other nodes are estimated to create their c... Geographic location of nodes is very useful in a sensor network. Previous localization algorithms assume that there exist some anchor nodes in this kind of network, and then other nodes are estimated to create their coordinates. Once there are not anchors to be deployed, those localization algorithms will be invalidated. Many papers in this field focus on anchor-based solutions. The use of anchors introduces many limitations, since anchors require external equipments such as global position system, cause additional power consumption. A novel positioning algorithm is proposed to use a virtual coordinate system based on a new concept--virtual anchor. It is executed in a distributed fashion according to the connectivity of a node and the measured distances to its neighbors. Both the adjacent member information and the ranging distance result are combined to generate the estimated position of a network, one of which is independently adopted for localization previously. At the position refinement stage the intermediate estimation of a node begins to be evaluated on its reliability for position mutation; thus the positioning optimization process of the whole network is avoided falling into a local optimal solution. Simulation results prove that the algorithm can resolve the distributed localization problem for anchor-free sensor networks, and is superior to previous methods in terms of its positioning capability under a variety of circumstances. 展开更多
关键词 anchor-free localization distributed algorithm position estimation sensor networks.
在线阅读 下载PDF
Feature Extraction of Localized Scattering Centers Using the Modified TLS-Prony Algorithm and Its Applications 被引量:5
7
作者 Wang Jun Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang 621900, P.R.China 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2002年第3期31-39,共9页
This paper presents an all-parametric model of radar target in optic region, in which the localized scattering center's frequency and aspect angle dependent scattering level, distance and azimuth locations are mod... This paper presents an all-parametric model of radar target in optic region, in which the localized scattering center's frequency and aspect angle dependent scattering level, distance and azimuth locations are modeled as the feature vectors. And the traditional TLS-Prony algorithm is modified to extract these feature vectors. The analysis of Cramer-Rao bound shows that the modified algorithm not only improves the restriction of high signal-to-noise ratio(SNR)threshold of traditional TLS-Prony algorithm, but also is suitable to the extraction of big damped coefficients and high-resolution estimation of near separation poles. Finally, an illustrative example is presented to verify its practicability in the applications. The experimental results show that the method developed can not only recognize two airplane-like targets with similar shape at low SNR, but also compress the original radar data with high fidelity. 展开更多
关键词 localized scattering centers Estimation algorithm Low SNR High resolution.
在线阅读 下载PDF
Application of quantum neural networks in localization of acoustic emission 被引量:6
8
作者 Aidong Deng Li Zhao Wei Xin 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2011年第3期507-512,共6页
Due to defects of time-difference of arrival localization,which influences by speed differences of various model waveforms and waveform distortion in transmitting process,a neural network technique is introduced to ca... Due to defects of time-difference of arrival localization,which influences by speed differences of various model waveforms and waveform distortion in transmitting process,a neural network technique is introduced to calculate localization of the acoustic emission source.However,in back propagation(BP) neural network,the BP algorithm is a stochastic gradient algorithm virtually,the network may get into local minimum and the result of network training is dissatisfactory.It is a kind of genetic algorithms with the form of quantum chromosomes,the random observation which simulates the quantum collapse can bring diverse individuals,and the evolutionary operators characterized by a quantum mechanism are introduced to speed up convergence and avoid prematurity.Simulation results show that the modeling of neural network based on quantum genetic algorithm has fast convergent and higher localization accuracy,so it has a good application prospect and is worth researching further more. 展开更多
关键词 acoustic emission(AE) localization quantum genetic algorithm(QGA) back propagation(BP) neural network.
在线阅读 下载PDF
Automatic software fault localization based on artificial bee colony 被引量:2
9
作者 Linzhi Huang Jun Ai 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2015年第6期1325-1332,共8页
Software debugging accounts for a vast majority of the financial and time costs in software developing and maintenance. Thus, approaches of software fault localization that can help automate the debugging process have... Software debugging accounts for a vast majority of the financial and time costs in software developing and maintenance. Thus, approaches of software fault localization that can help automate the debugging process have become a hot topic in the field of software engineering. Given the great demand for software fault localization, an approach based on the artificial bee colony (ABC) algorithm is proposed to be integrated with other related techniques. In this process, the source program is initially instrumented after analyzing the dependence information. The test case sets are then compiled and run on the instrumented program, and execution results are input to the ABC algorithm. The algorithm can determine the largest fitness value and best food source by calculating the average fitness of the employed bees in the iteralive process. The program unit with the highest suspicion score corresponding to the best test case set is regarded as the final fault localization. Experiments are conducted with the TCAS program in the Siemens suite. Results demonstrate that the proposed fault localization method is effective and efficient. The ABC algorithm can efficiently avoid the local optimum, and ensure the validity of the fault location to a larger extent. 展开更多
关键词 software debugging software fault localization arti-ficial bee colony (ABC) algorithm program instrumentation.
在线阅读 下载PDF
Underwater Localization for Multiple AUVs Based on Bearing and Range Measurements
10
作者 李闻白 刘明雍 郭千桥 《Defence Technology(防务技术)》 SCIE EI CAS 2009年第4期267-272,共6页
A novel underwater localization algorithm for autonomous underwater vehicle(AUVs) is proposed. Taking aim at the high cost of the traditional "leader-follower" positioning,a "parallel" model is ado... A novel underwater localization algorithm for autonomous underwater vehicle(AUVs) is proposed. Taking aim at the high cost of the traditional "leader-follower" positioning,a "parallel" model is adopted to describe the localization problem. Under an unknown-but-bounded assumption for sensor noise,bearing and range measurements can be modeled as linear constraints on the configuration space of the AUVs. Merged these constraints,a convex polyhedron representing the set of all configurations consistent with the sensor measurements can be induced. Estimates for the uncertainty in the position of a single AUV or the relative positions of two or more AUVs can then be obtained by projecting this polyhedron into appropriate subspaces of the configuration space. The localization uncertain region for each AUV can be recovered by an approximation algorithm to realize underwater localization for multiple AUVs. The deduced theoretically and the simulated results show that it is an economical and practical localization method for the AUV swarm. 展开更多
关键词 automatic control technology multiple AUVs underwater localization approximation algorithm uncertain region
在线阅读 下载PDF
一种应用引力搜索算法改进的DV-Hop模型
11
作者 石琴琴 丛新龙 +1 位作者 傅阳阳 张建平 《电讯技术》 北大核心 2025年第8期1306-1314,共9页
针对无线传感器网络节点定位模型DV-Hop(Distance Vector Hop)的各向异性网络应用适应性问题,提出了一种基于引力搜索算法优化的改进DV-Hop模型。首先,用平均跳距衡量信标间路径的曲折度并据此排序,有序提取未知节点,检索出对应的定位... 针对无线传感器网络节点定位模型DV-Hop(Distance Vector Hop)的各向异性网络应用适应性问题,提出了一种基于引力搜索算法优化的改进DV-Hop模型。首先,用平均跳距衡量信标间路径的曲折度并据此排序,有序提取未知节点,检索出对应的定位信标组合并完成距离估计,以此获得在当前网络拓扑条件下最优的定位计算条件;进而,将未知节点定位问题建模为非线性方程组求解问题,组合使用Min-Max算法和引力搜索算法,初始化种群并完成迭代求解。实验结果表明,与原DV-Hop模型和相关文献提出的3种典型改进模型DBO-DV-Hop、IMSSA-DV-Hop和OANS-DV-Hop相比,所提的改进模型可分别降低约52.1%、13.5%、18.8%和13.1%的平均定位误差,且对网络拓扑变化具有较强的鲁棒性,从而为保证DV-Hop模型在实际应用中的定位精度提供了一种可行方案。 展开更多
关键词 无线传感器网络 dv-hop 节点定位 平均跳距 引力搜索算法
在线阅读 下载PDF
基于多源信息融合的猪舍内车辆自主导航系统
12
作者 龙长江 朱仕俊 +3 位作者 谭鹤群 黎煊 刘子扬 孟岩 《农业机械学报》 北大核心 2026年第6期249-257,270,共10页
针对智能化无人生猪养殖车辆自主巡检问题,本研究提出基于多源信息融合的猪舍自主导航系统。基于三维激光雷达的激光-惯性紧耦合算法Fast-LIO2获取里程计信息,通过基于因子图优化的回环建图算法构建猪舍环境地图,研究基于地图配准的定... 针对智能化无人生猪养殖车辆自主巡检问题,本研究提出基于多源信息融合的猪舍自主导航系统。基于三维激光雷达的激光-惯性紧耦合算法Fast-LIO2获取里程计信息,通过基于因子图优化的回环建图算法构建猪舍环境地图,研究基于地图配准的定位算法和基于反光柱匹配的定位算法实现导航平台的定位,利用迪杰斯特拉算法和时间弹性带算法分别规划全局路径和局部路径,最终实现猪舍场景下的自主导航。试验结果表明,基于因子图优化的回环建图算法构建的猪舍地图最大绝对误差为0.077 m,最大相对误差为3.79%,精度高于不含回环检测的建图算法。基于地图配准的定位算法x和y方向平均偏差分别为0.066 m和0.052 m,基于反光柱匹配的定位算法x和y方向平均偏差分别为0.046、0.042 m, 2种定位算法精度均高于自适应蒙特卡洛定位算法,二者配合使用,同时保证了自主导航系统定位精度和鲁棒性。当移动平台速度为0.3 m/s时,实际导航点与设定目标点之间的横向偏差最大值为0.09 m,纵向偏差最大值为0.089 m,航向角平均偏差为7.06°。自主导航系统各项性能指标满足猪舍场景高精度建图、定位和导航要求,为无人化生猪养殖提供了技术支撑。 展开更多
关键词 猪舍 激光-惯性紧耦合算法 激光雷达 定位 导航
在线阅读 下载PDF
基于虚拟锚点的室内融合定位方法
13
作者 张宇 李泽 +2 位作者 田增山 桂术亮 刘凯凯 《通信学报》 北大核心 2026年第1期27-40,共14页
利用通信信号镜面反射形成的虚拟锚点(VAP)实现终端定位是近年来的一个研究热点。针对终端在定位过程中VAP出现的“生灭”现象,在单输入单输出(SISO)网络中提出了一种基于虚拟锚点的室内融合定位方法。首先,利用状态转移方程提供的先验... 利用通信信号镜面反射形成的虚拟锚点(VAP)实现终端定位是近年来的一个研究热点。针对终端在定位过程中VAP出现的“生灭”现象,在单输入单输出(SISO)网络中提出了一种基于虚拟锚点的室内融合定位方法。首先,利用状态转移方程提供的先验信息,对观测集合中的非镜面杂波进行滤除。其次,利用平面内不同位置的预测观测集和匈牙利算法构建定位模型,并利用群优化算法估计终端的位置。再次,通过融合滤波方法将状态方程提供的先验位置信息与估计的位置进行融合。仿真结果表明,相较于现有方法,所提方法能够有效地提升定位精度。最后,利用软件无线电搭建测试系统,真实环境下的测试结果表明,所提方法可以达到0.47 m的平均定位精度。 展开更多
关键词 室内定位 虚拟锚点 匈牙利算法 融合滤波
在线阅读 下载PDF
基于全局-局部注意力机制的甘蔗病害分类算法
14
作者 邓健志 黄福兴 +3 位作者 王泽平 罗丽平 井佩光 李云 《农业机械学报》 北大核心 2026年第6期300-310,共11页
针对复杂自然场景下,甘蔗病斑受光照不均等干扰,识别难度大,检测效率低等问题,本文提出了一种基于全局-局部注意力机制的甘蔗病虫害分类算法(Sugarcane disease classification algorithm using global-local attention mechanism, SDCA... 针对复杂自然场景下,甘蔗病斑受光照不均等干扰,识别难度大,检测效率低等问题,本文提出了一种基于全局-局部注意力机制的甘蔗病虫害分类算法(Sugarcane disease classification algorithm using global-local attention mechanism, SDCA-GLAM)。为扩充模型容量,将改进的Vision Transformer (ViT)模型线性投影层替换为可变形的卷积模块,自适应地提取病斑纹理与叶片边缘信息;引入可重参数化的卷积结构以增强空间位置信息表达能力,在多层感知机环节融合深度卷积模块,用于挖掘高维空间特征;为减少模型参数量并提升检测准确率,设计全局-局部自注意力并行学习支路,局部支路采用窗口注意力细化高频纹理特征,全局支路引入池化策略压缩向量K/V的空间维度,并通过超参数α聚合关键区域信息;将层归一化操作替换为批归一化,以降低频繁reshape带来的内存开销和时间损耗。实验结果表明,SDCA-GLAM在包含11个类别的甘蔗叶片数据集上准确率达到88.26%,吞吐量达1 620幅/s,模型参数量为2.758×10~7,显著优于对比的主流模型。本文算法在准确率与效率之间取得了良好平衡,可为甘蔗病害移动端快速识别提供有效技术支撑。 展开更多
关键词 甘蔗 分类算法 轻量化模型 VIT 全局-局部注意力机制
在线阅读 下载PDF
齿轮箱早期故障有理样条插值ILMD方法诊断
15
作者 张正华 杨长征 +1 位作者 王大浩 程利辉 《机械设计与制造》 北大核心 2026年第3期142-145,共4页
为了弥补LMD算法存在模态混叠的问题,以ILMD方法分解初始振动信号得到乘积函数分量后,选择乘积函数峭度值组成判断依据,以此确定包含主要故障特征的有效分量,通过包络分析的方式对齿轮箱故障进行诊断。研究结果表明:通过超参数P优化的RS... 为了弥补LMD算法存在模态混叠的问题,以ILMD方法分解初始振动信号得到乘积函数分量后,选择乘积函数峭度值组成判断依据,以此确定包含主要故障特征的有效分量,通过包络分析的方式对齿轮箱故障进行诊断。研究结果表明:通过超参数P优化的RSI算法构建得到包络线,可以对插值曲线“过冲”起到良好抑制效果,实现齿轮箱故障数据的准确采集,从而实现从动轮磨损故障诊断的目标。这里ILMD方法相对LMD和EEMD算法对齿轮磨损特征的信号提取与分析具有更高效率。基于ILMD特征为输入的模型的诊断精度高于LMD和LMD种方法达到99.6%,且测试标准差最小,可以有效对齿轮箱故障进行诊断。该研究能够有效提高齿轮箱早期故障诊断能力,且适用于其它的机械传动设备上,具有很好的推广应用价值。 展开更多
关键词 齿轮箱 早期故障 诊断分析 有理样条插值 改进局部均值分解算法
在线阅读 下载PDF
深部煤岩组合体力学特性研究进展
16
作者 左建平 陈岩 +2 位作者 宋洪强 徐丞谊 于祥 《煤炭科学技术》 北大核心 2026年第4期140-158,共19页
随着我国煤炭开采深度不断增加,深部复杂环境(如高地应力、高地温、高渗透压、构造、断层、采动影响等)使得煤岩动力灾害日趋严重,制约了煤矿安全生产与资源高效回收。煤岩组合体作为矿井最基本的承载结构与灾害孕育的核心,其力学行为... 随着我国煤炭开采深度不断增加,深部复杂环境(如高地应力、高地温、高渗透压、构造、断层、采动影响等)使得煤岩动力灾害日趋严重,制约了煤矿安全生产与资源高效回收。煤岩组合体作为矿井最基本的承载结构与灾害孕育的核心,其力学行为及失稳机理已逐步成为采矿岩石力学研究的前沿热点。系统综述了深部煤岩组合体在力学试验、声发射特征、本构模型、能量演化与失稳机制等方面的研究进展。研究表明:几何构型与围压共同控制组合体的强度、变形及破坏模式,围压升高引发脆–延转化;声发射监测与波速层析成像揭示了“先煤后岩”的渐进破坏过程与失稳前兆;基于裂纹应变演化构建了考虑加载–卸载路径的非线性本构模型;提出了以“煤岩差能”为核心的失稳判据,阐明了能量非均衡分布是冲击启动的关键;进一步分析了煤岩协同破坏机制,指出深部条件下材料特性影响增强,组合体冲击倾向性显著高于单体煤。最后,提出未来深部煤岩研究需聚焦多场耦合试验、智能损伤诊断、精准本构模型及主被动防控技术,以支撑动力灾害防控。 展开更多
关键词 深部煤岩组合体 非线性本构模型 煤岩差能失稳 源空间定位 煤岩结构−材料协同破坏
在线阅读 下载PDF
基于GWO-VMD-NLM的钢轨波磨激光检测与特征定量识别方法研究
17
作者 赵太飞 翟新宁 +2 位作者 刘长李 陈娅丽 郑博睿 《仪器仪表学报》 北大核心 2026年第3期256-270,共15页
针对现有钢轨波磨激光检测方法存在检测准确率较低的问题,提出了一种基于灰狼算法优化变分模态分解(GWO-VMD)的波磨信号处理方法。该方法联合多尺度排列熵(MPE)与方差贡献率(VCR)构成双阈值准则,以准确筛选噪声分量;进而采用非局部均值(... 针对现有钢轨波磨激光检测方法存在检测准确率较低的问题,提出了一种基于灰狼算法优化变分模态分解(GWO-VMD)的波磨信号处理方法。该方法联合多尺度排列熵(MPE)与方差贡献率(VCR)构成双阈值准则,以准确筛选噪声分量;进而采用非局部均值(NLM)滤波对噪声分量进行降噪处理,降噪后将其与有效分量重构,进而计算移动峰峰值(PPR)、移动波深幅值有效值(RMS)及超限率,实现波磨波长、位置与磨损程度的定量识别。以襄渝线实测数据为例,将所提算法与多种典型算法进行对比,包括粒子群优化变分模态分解联合非局部均值(PSO-VMD-NLM)、变分模态分解联合非局部均值(VMD-NLM)、集合经验模态分解联合非局部均值(EEMD-NLM)、灰狼优化变分模态分解联合小波阈值(GWO-VMD-WT)、完全自适应噪声集合经验模态分解联合小波阈值(CEEMDAN-WT)、完全自适应噪声集合经验模态分解联合非局部均值(CEEMDAN-NLM),以及传统小波阈值(WT)降噪方法。实验结果表明,相较于上述方法,所提出算法在信噪比(SNR)上分别提升了3.9%、32.4%、68.4%、8.7%、46.6%、23.6%和89.6%;均方根误差(RMSE)分别降低了15.5%、74.4%、85.9%、13.1%、80.5%、68.8%和88.9%。采用多线路实测数据进行泛化能力验证,结果表明所提出的算法在新线路工况下仍保持稳定的降噪性能与识别精度,能够在复杂噪声条件下实现钢轨波磨的多波段分离与多特征量化分析,为轨道状态评估和精准打磨维护提供可靠技术支撑。 展开更多
关键词 激光检测 灰狼优化算法 变分模态分解 非局部均值降噪 超限率
在线阅读 下载PDF
基于改进TSO_DWA算法的割草机局部避障 被引量:2
18
作者 徐正桓 张业鹏 杨光友 《农机化研究》 北大核心 2026年第4期214-224,共11页
针对传统动态窗口法(DWA)在密集障碍物区域和直线移动障碍物区域存在难以选取最优路径和生成路径不平滑等问题,提出了一种基于改进金枪鱼算法(TSO)觅食行为的DWA优化方法,以实现割草机的局部路径避障。首先,用Fuch无限折叠混沌法初始化... 针对传统动态窗口法(DWA)在密集障碍物区域和直线移动障碍物区域存在难以选取最优路径和生成路径不平滑等问题,提出了一种基于改进金枪鱼算法(TSO)觅食行为的DWA优化方法,以实现割草机的局部路径避障。首先,用Fuch无限折叠混沌法初始化金枪鱼群初始位置,来提升算法寻求最优解的搜索效率,其遍历性可有效避免传统随机初始化陷入局部最优的问题;其次,利用学习率ρ调节DWA算法权重系数的更新步长,强化路径寻优能力,并增加扰动项r和扰动系数σ,提高寻求最优权重系数的速度,减小航向角权重系数在复杂环境中占比不变导致路径不平滑的影响;最后,用改进后的评价函数对选取路径进行评价计算得分,对比迭代次数和评价得分,从而确定最优轨迹。仿真试验和草地试验表明:在仿真环境中,TSO_DWA算法在密集障碍物区域和直线移动障碍物区域能规划出更平滑、合理的运动路径;在草地和行人场景中,割草机具备自主导航能力,且定位误差与最大跟踪误差均小于等于0.16 m,满足实际需求。 展开更多
关键词 割草机 局部避障 改进TSO_DWA算法 轨迹优化
在线阅读 下载PDF
一种改进的无线传感器网络DV-Hop定位算法 被引量:54
19
作者 石为人 贾传江 梁焕焕 《传感技术学报》 CAS CSCD 北大核心 2011年第1期83-87,共5页
针对DV-Hop定位算法以平均跳段距离代替实际直线距离而导致定位误差较大这一问题,提出了一种改进的DV-Hop定位算法。在改进算法中,锚节点通过实际距离和估计距离的误差来修正每跳平均距离。改进DV-Hop节点坐标计算方法,摒弃传统的三边... 针对DV-Hop定位算法以平均跳段距离代替实际直线距离而导致定位误差较大这一问题,提出了一种改进的DV-Hop定位算法。在改进算法中,锚节点通过实际距离和估计距离的误差来修正每跳平均距离。改进DV-Hop节点坐标计算方法,摒弃传统的三边定位算法而采用新的二维双曲线定位算法计算节点坐标。最后求得包含误差修正值的最终节点坐标,它更接近实际节点坐标。仿真结果表明,与传统DV-Hop算法相比,改进算法在不需要增加节点的硬件开销的基础上能更有效地提高定位精度。 展开更多
关键词 传感器网络 dv-hop定位算法 每跳平均距离 双曲线定位算法
在线阅读 下载PDF
一种基于DV-HOP改进的无线传感器网络定位算法 被引量:27
20
作者 朱敏 刘昊霖 +1 位作者 张志宏 易宗锐 《四川大学学报(工程科学版)》 EI CAS CSCD 北大核心 2012年第1期93-98,共6页
针对无线传感器网络中经典定位算法DV-HOP定位精度低的缺陷,提出改进算法。该算法采用新的方式计算未知节点与锚节点的距离,提出锚节点信任度的概念,并利用加权最小二乘法计算节点坐标。Matlab仿真实验结果表明,在相同网络环境下,该算... 针对无线传感器网络中经典定位算法DV-HOP定位精度低的缺陷,提出改进算法。该算法采用新的方式计算未知节点与锚节点的距离,提出锚节点信任度的概念,并利用加权最小二乘法计算节点坐标。Matlab仿真实验结果表明,在相同网络环境下,该算法能有效减小距离计算带来的定位误差,提高定位精度。 展开更多
关键词 无线传感器网络 节点定位 dv-hop算法 信任度 加权最小二乘法
在线阅读 下载PDF
上一页 1 2 128 下一页 到第
使用帮助 返回顶部