To address the lack of systematic studies on heavy metal fluorescent probes in typical buffer solutions,this study developed a Fe^(3+)and Cu^(2+)fluorescent probe,DHU‑NP‑4,based on a naphthalimide fluorophore.Comparat...To address the lack of systematic studies on heavy metal fluorescent probes in typical buffer solutions,this study developed a Fe^(3+)and Cu^(2+)fluorescent probe,DHU‑NP‑4,based on a naphthalimide fluorophore.Comparative analysis of the probe's performance in various buffer systems revealed that buffers with high organic content are unsuitable for evaluating such probes.Furthermore,the pH of the solvent system was found to significantly influence the probe's behavior.Under highly acidic conditions(pH≤2),DHU‑NP‑4 exhibited exceptional specificity for Fe^(3+),while in alkaline conditions,it demonstrated high specificity for Cu^(2+).Leveraging these properties,the probe enabled the quantitative detection of Fe^(3+)and Cu^(2+)in solution.展开更多
Cross-linked chitosan(CS),cross-linked chitosan/graphene(CS/RGO10) and cross-linked chitosan/graphene oxide(CS/GO10) were prepared as adsorbents for Cu(Ⅱ).The effects of pH,contact time,adsorbent dosage and initial c...Cross-linked chitosan(CS),cross-linked chitosan/graphene(CS/RGO10) and cross-linked chitosan/graphene oxide(CS/GO10) were prepared as adsorbents for Cu(Ⅱ).The effects of pH,contact time,adsorbent dosage and initial concentration of Cu(Ⅱ) on the adsorbing abilities of CS,CS/RGO10 and CS/GO10 to Cu(Ⅱ) were investigated.The results demonstrate that the adsorption capacities of CS/GO10 and CS/RGO10 are greater than that of CS,especially at pH 5.0 and the adsorption capacities are 202.5,150 and 137.5 mg/g,respectively.Their behaviors obey the Freundlich isotherm model very well.Additionally,CS/GO10 has the shortest time to achieve adsorption equilibrium among them and can be used as a perspective adsorbent for Cu(Ⅱ).展开更多
An enhanced adsorption and desorption procedure of Cu(II) onto green synthesized acrylic acid grafted polytetrafluoroethylene fiber(i.e. AA-PTFE) was conducted with various chemical methods. The results show that the ...An enhanced adsorption and desorption procedure of Cu(II) onto green synthesized acrylic acid grafted polytetrafluoroethylene fiber(i.e. AA-PTFE) was conducted with various chemical methods. The results show that the optimal adsorption condition is in acetic acid, sodium acetate(HAc-Na Ac) buffer solution(p H=6.80) with the initial concentration of 0.2 mg/mL. The process is very fast initially and equilibrium time is 12 h with a high Cu(II) uptake of 112.26 mg/g at 298 K. Various thermodynamic parameters indicate that the adsorption process is spontaneous and endothermic in nature. In the elution test, 2 mol/L HCl solution achieves satisfactory elution rate and shows no significant decrease after 5 adsorption-desorption cycle, which indicates that AA-PTFE can be regenerated and reused, and due to which a reasonable amount of nondegradable polymer material is avoided in industrial use. Finally, PTFE, AA-PTFE fiber, and Cu(II) loaded AA-PTFE fiber were characterized with various techniques, including IR spectroscopic technique, SEM and EDS.展开更多
China has accumulated massive fine grained copper mine tailings stocks because of the past mining activities in this area. The tailings contain a variety of heavy metals, and the mass percent of Cu, which is one of th...China has accumulated massive fine grained copper mine tailings stocks because of the past mining activities in this area. The tailings contain a variety of heavy metals, and the mass percent of Cu, which is one of the main contaminants in tailings, is up to 0.2601% (analysis by XRF). The Cu can pollute soil and groundwater by rain leaching in the form of Cu(Ⅱ), furthermore ,the fine grained copper-ore-tailings can contaminant larger area by wind for its small granularity ( < 74 μm). The main cause of weathering of mine tailings is due to oxidative dissolution of sulfides. Microorganisms, such as Acidithiobacillus ferrooxidans, play an important role in weathering. These bacteria attach to exposed to mineral surfaces by excreting extracellular polymers and oxidize the sulfide mineral. Some of these bacteria also oxidize Fe2+ to Fe3+ which can chemically oxidize sulfide minerals. These reactions produce voluminous quantities of acid mine drainage and heavy metals which are harmful to the environment and human healthy. This study aims at finding the weathering effects of A. ferrooxidans to Cu(II) pollution of fine grained copper mine tailings, and our experiment applied indigenous A. ferrooxidans FJ-01 to leach the tailings. The optimum test parameters were obtained using shaking flask experiment and SEM observation under the following experimental conditions: 39 days residence time, pulp density 1%-15% (1%, 5% and 15%), 30℃, 120 rpm, pH between 1-3 and redox potential between 400-650 mV. The test results show that the leaching rate of Cu reached 43.1% when the pulp density was 1% after 33 days and kept invariant till the end of the test. In addition, the leaching rate of Cu will decrease as the increase of pulp density, and the maximum rate of 15% pulp density was only 12.5%. From the SEM, it can be seen that the fine grain of tailings flocculated to conglobation under the action of bacterial leaching.展开更多
文摘To address the lack of systematic studies on heavy metal fluorescent probes in typical buffer solutions,this study developed a Fe^(3+)and Cu^(2+)fluorescent probe,DHU‑NP‑4,based on a naphthalimide fluorophore.Comparative analysis of the probe's performance in various buffer systems revealed that buffers with high organic content are unsuitable for evaluating such probes.Furthermore,the pH of the solvent system was found to significantly influence the probe's behavior.Under highly acidic conditions(pH≤2),DHU‑NP‑4 exhibited exceptional specificity for Fe^(3+),while in alkaline conditions,it demonstrated high specificity for Cu^(2+).Leveraging these properties,the probe enabled the quantitative detection of Fe^(3+)and Cu^(2+)in solution.
基金Projects(51071067,21271069,J1210040,51238002) supported by the National Natural Science Foundation of ChinaProjects(2013GK3015,2012SK3170) supported by the Science and Technology Program of Hunan Province,China
文摘Cross-linked chitosan(CS),cross-linked chitosan/graphene(CS/RGO10) and cross-linked chitosan/graphene oxide(CS/GO10) were prepared as adsorbents for Cu(Ⅱ).The effects of pH,contact time,adsorbent dosage and initial concentration of Cu(Ⅱ) on the adsorbing abilities of CS,CS/RGO10 and CS/GO10 to Cu(Ⅱ) were investigated.The results demonstrate that the adsorption capacities of CS/GO10 and CS/RGO10 are greater than that of CS,especially at pH 5.0 and the adsorption capacities are 202.5,150 and 137.5 mg/g,respectively.Their behaviors obey the Freundlich isotherm model very well.Additionally,CS/GO10 has the shortest time to achieve adsorption equilibrium among them and can be used as a perspective adsorbent for Cu(Ⅱ).
基金Project(20133326110006)supported by Ph D Programs Foundation of Ministry of Education of ChinaProject(2005002)supported by Zhejiang Provincial Key Laboratory of Fiber Materials and Manufacturing Technology,ChinaProject(YR2015002)supported by Zhejiang Provincial Top Key Academic Discipline of Chemical Engineering and Technology of Zhejiang Sci-Tech University,China
文摘An enhanced adsorption and desorption procedure of Cu(II) onto green synthesized acrylic acid grafted polytetrafluoroethylene fiber(i.e. AA-PTFE) was conducted with various chemical methods. The results show that the optimal adsorption condition is in acetic acid, sodium acetate(HAc-Na Ac) buffer solution(p H=6.80) with the initial concentration of 0.2 mg/mL. The process is very fast initially and equilibrium time is 12 h with a high Cu(II) uptake of 112.26 mg/g at 298 K. Various thermodynamic parameters indicate that the adsorption process is spontaneous and endothermic in nature. In the elution test, 2 mol/L HCl solution achieves satisfactory elution rate and shows no significant decrease after 5 adsorption-desorption cycle, which indicates that AA-PTFE can be regenerated and reused, and due to which a reasonable amount of nondegradable polymer material is avoided in industrial use. Finally, PTFE, AA-PTFE fiber, and Cu(II) loaded AA-PTFE fiber were characterized with various techniques, including IR spectroscopic technique, SEM and EDS.
文摘China has accumulated massive fine grained copper mine tailings stocks because of the past mining activities in this area. The tailings contain a variety of heavy metals, and the mass percent of Cu, which is one of the main contaminants in tailings, is up to 0.2601% (analysis by XRF). The Cu can pollute soil and groundwater by rain leaching in the form of Cu(Ⅱ), furthermore ,the fine grained copper-ore-tailings can contaminant larger area by wind for its small granularity ( < 74 μm). The main cause of weathering of mine tailings is due to oxidative dissolution of sulfides. Microorganisms, such as Acidithiobacillus ferrooxidans, play an important role in weathering. These bacteria attach to exposed to mineral surfaces by excreting extracellular polymers and oxidize the sulfide mineral. Some of these bacteria also oxidize Fe2+ to Fe3+ which can chemically oxidize sulfide minerals. These reactions produce voluminous quantities of acid mine drainage and heavy metals which are harmful to the environment and human healthy. This study aims at finding the weathering effects of A. ferrooxidans to Cu(II) pollution of fine grained copper mine tailings, and our experiment applied indigenous A. ferrooxidans FJ-01 to leach the tailings. The optimum test parameters were obtained using shaking flask experiment and SEM observation under the following experimental conditions: 39 days residence time, pulp density 1%-15% (1%, 5% and 15%), 30℃, 120 rpm, pH between 1-3 and redox potential between 400-650 mV. The test results show that the leaching rate of Cu reached 43.1% when the pulp density was 1% after 33 days and kept invariant till the end of the test. In addition, the leaching rate of Cu will decrease as the increase of pulp density, and the maximum rate of 15% pulp density was only 12.5%. From the SEM, it can be seen that the fine grain of tailings flocculated to conglobation under the action of bacterial leaching.
