Good crystallinity can reduce the charge recombination centers caused by defects,whilst structures with strong polycondensation have high charge mobility,leading to more charge transfer to the material surface for rea...Good crystallinity can reduce the charge recombination centers caused by defects,whilst structures with strong polycondensation have high charge mobility,leading to more charge transfer to the material surface for reaction.Much effort has been put into the preparation of a highly efficient g-C_(3)N_(4) with defects to improve its application potential under the premise in high crystallinity.Hence,this review paper emphasizes the importance to balance the defect and crystallinity of g-C_(3)N_(4).In addition,detailed discussion on the relationship between defects and activity of g-C_(3)N_(4) was carried out based on its applications in environmental purification(e.g.,VOCs oxidation,NO_(x) oxidation,H_(2)O_(2) evolution,sterilization,pesticide oxidation)and energy conversion(H_(2) evolution,N_(2) fixation and CO_(2) reduction).Lastly,the challenge in developing more efficient defective g-C_(3)N_(4) photocatalytic materials is summarized.展开更多
Well-crystallized high-silica NaY zeolites （Si/Al〉2.5） were prepared from a reaction mixture consisting of metakaolin, sodium silicate solution and seed solution via optimization of the mixture composition and reac...Well-crystallized high-silica NaY zeolites （Si/Al〉2.5） were prepared from a reaction mixture consisting of metakaolin, sodium silicate solution and seed solution via optimization of the mixture composition and reaction conditions. The transformation from kaolin to high-silica NaY zeolite was confirmed by XRD, SEM and IR techniques. Subsequently, the influence of synthesis parameters, i.e. initial SIO2/Al2O3, initial Na2O/SiO2, initial H2O/SiO2, aging time of the seed solution, crystallization temperature and crystallization time, on the NaY growth was investigated in terms of crystallinity and Si/Al ratio. The results showed that the effects of initial SiO2/Al2O3, initial Na2O/SiO2 and initial H2O/ SiO2 on the crystaIlinity and Si/Al ratio of NaY zeolite are similar to those observed in the conventional syntheses of NaY zeolites only using sodium silicate solution as silicon source. However, due to the use of metakaolin as the main silicon and aluminum sources in the present study, a long crystallization induction period of 20 h was achieved, which can be attributed to the dissolution of metakaolin. In addition, different from the conventional syntheses of zeolite NaY, pure NaY zeolites （i.e. without NaP zeolite impurity） were still obtained even at 120℃ because of the use of a large quantity of seed solution （23 wt%） in the reaction mixture. As the aging time of the seed solution increased from 3.5 h to 22 h, the relative crystallinity of the NaY zeolite first increased sharply and then reached a plateau, while the Si/Al ratio first increased rapidly up to a maximum value of 2.75 corresponding to an aging time of 6.5 h, and then decreased sharply with the aging time.展开更多
ZSM-5 zeolite microparticles （MPs） were synthesized under hydrothermal condition using a low crystal seed addition approach without template. The synthesis parameters such as the seed addition amount, the SiOJA1203 ...ZSM-5 zeolite microparticles （MPs） were synthesized under hydrothermal condition using a low crystal seed addition approach without template. The synthesis parameters such as the seed addition amount, the SiOJA1203 ratio, the aluminum source, the feeding addition method, aging, and crystallization were investigated. The structure, morphology and composition of the as-synthesized ZSM-5 zeolite MPs were characterized by X-ray powder diffraction （XRD）, scanning electron microscopy （SEM）, laser particle size distribution （PSD） measurements, and inductively coupled plasma-atomic emission spectrometry （ICP-AES）. The SIO2/A1203 ratio of ZSM-5 zeolite MPs was in the range of 20~80. The low seed addition was beneficial to improving the crystallinity and shortening the crystallization time, and the suitable amount of seed was 0.25% （SIO2）. The ZSM-5 zeolite MPs synthesized with aluminium nitrate nonahydrate used as the aluminum source exhibited a relatively high crystallinity. An appropriate aging time could eliminate the effect of feeding addition method and effectively adjust particle size. The particle size of ZSM-5 zeolite obtained at an aging time of 20 h was around 2.0 I.tm. Prolonging the aging time appropriately could also shorten the high-temperature crystallization time. The suitable aging time was 24 h, and the relative crystallinity of ZSM-5 zeolite could reach up to 99% after crystallization for 24 h at 180 ℃展开更多
Germanium-tin films with rather high Sn content （28.04% and 29.61%） are deposited directly on Si （100） and Si （111） substrates by magnetron sputtering. The mechanism of the effect of rapid thermal annealing on t...Germanium-tin films with rather high Sn content （28.04% and 29.61%） are deposited directly on Si （100） and Si （111） substrates by magnetron sputtering. The mechanism of the effect of rapid thermal annealing on the Sn surface segregation of Ge1-xSnx films is investigated by x-ray photoelectron spectroscopy （XPS） and atomic force microscopy （AFM）. The x-ray diffraction （XRD） is also performed to determine the crystallinities of the Ge1-xSnx films. The experimental results indicate that root mean square （RMS） values of the annealed samples are comparatively small and have no noticeable changes for the as-grown sample when annealing temperature is below 400℃. The diameter of the Sn three-dimensional （3D） island becomes larger than that of an as-grown sample when the annealing temperature is 700℃. In addition, the Sn surface composition decreases when annealing temperature ranges from 400℃ to 700℃. However, Sn bulk compositions in samples A and B are kept almost unchanged when the annealing temperature is below 600℃. The present investigation demonstrates that the crystallinity of Ge1-xSnx/Si （111） has no obvious advantage over that of Ge1-xSnx/Si （100） and the selection of Si （111） substrate is an effective method to improve the surface morphologies of Ge1-xSnx films. We also find that more severe Sn surface segregation occurs in the Ge1-xSnx/Si （111） sample during annealing than in the Ge1-xSnx/Si （100） sample.展开更多
WS2 exhibits tremendous potentials for Na-ions storage owing to high capacity(433 mAh g^(-1)). Nevertheless, WS2 layered structure is often exfoliated with rapid capacity decay and sluggish reaction kinetics.In this w...WS2 exhibits tremendous potentials for Na-ions storage owing to high capacity(433 mAh g^(-1)). Nevertheless, WS2 layered structure is often exfoliated with rapid capacity decay and sluggish reaction kinetics.In this work, WS2 nanosheets with different crystallinities are controlled by different synthesis methods.The high crystallinity WS2 exhibits high degree of interlayer order and strong interlayer force. It exhibits superior electrochemical properties, at the current density of 200 mA g^(-1) after 300 cycles with reversible capacity of 471 mAh g^(-1). Even at 5.0 A g^(-1), the capacities can still arrive at 240 mAh g^(-1) after 250 cycles, exhibiting stable cycling performance. Further electrochemical research finds that the high degree of interlayer order of layered WS2 structure can perform highly conducive Na+insertion/extraction with greatly improved contribution of intercalation capacity. Moreover, the strong interlayer force can effectively restrain the exfoliating of the WS2 nanosheets, guaranteeing the stability of the structure. Combining the above result reveals that controlling the order and force of the interlayer is an effective way to enhance the electrochemical properties of WS2 as SIBs anode materials. This work can provide new insight for inhibiting the exfoliation of layered compounds to pursue excellent electrochemical performance in Na-ion storage systems.展开更多
In this paper, we report a high-perfornmnce P3HT/PCBM bulk-heterojunction solar cell with a power conversion efficiency of 4.85% fabricated by adjusting the polymer crystallinity and nanoscale phase separation using a...In this paper, we report a high-perfornmnce P3HT/PCBM bulk-heterojunction solar cell with a power conversion efficiency of 4.85% fabricated by adjusting the polymer crystallinity and nanoscale phase separation using an ultrasonic irradiation mixing approach for the polymer. The grazing incidence X-ray diffraction, UV/Vis spectroscopic, and atomic force microscopic measurement results for the P3HT/PCBM blend films reveal that the P3HT/PCBM film fabricated by ultrasonic irradiation mixing of the P3HT and PCBM solutions for 10 min has a higher degree of crystallinity, a higher absorption efficiency, and better phase separation, which together account for the higher charge transport properties and photovoltaic cell performance.展开更多
As one of the most compelling photovoltaic devices, halide perovskite (PVK) solar cells have achieved a new surprising record power conversion efficiency (PCE) of 25.8%in 2021 [1]. This demonstrates the great potentia...As one of the most compelling photovoltaic devices, halide perovskite (PVK) solar cells have achieved a new surprising record power conversion efficiency (PCE) of 25.8%in 2021 [1]. This demonstrates the great potential of halide PVK solar cells as a highly competitive substitute to replace silicon-based solar cells in the photovoltaic market [2–6].展开更多
Covalent organic frameworks(COFs)are emerging as powerful electrochemical energy storage/conversion materials benefiting from the controlled pore and chemical structures,which are usually determined by the regulation ...Covalent organic frameworks(COFs)are emerging as powerful electrochemical energy storage/conversion materials benefiting from the controlled pore and chemical structures,which are usually determined by the regulation of the molecular building blocks.In contrast,the substituents are not considered significant for the electrochemical reactivity as they are usually removed during carbonization,which is necessary for improving the electrical conductivity of an electrode material.Here we show that the substituents play key roles not only in synthesizing COFs but also in controlling the COF structures during carbonization and thus the related electrochemical reactivity.Five characteristic substituents were used when synthesizing a new COF structure and it was found that electron-withdrawing strength of the substituents significantly influences the crystallinity of the COFs by tuning the reactivity of building blocks,or even determines whether the crystalline COF can be constructed.Moreover,the differences in chemical groups,sizes,and thermal stabilities of the substituents result in varied pore-collapse behaviors and the structures of the carbonized COFs,which show diverse effects on the electrochemical performances.An optimal material shows the highest surface area of 2131 m^(2)/g,rich pores around 1 nm,and the highest ratio of sp^(2) carbon among the samples,corresponding to the largest double-layer specific capacity over 125 F/g in an ionic liquid electrolyte,while another material with the lowest surface area and N-doping level exhibits a high H_(2)O_(2) production selectivity over 80%through selective oxygen reduction.This study shows guiding significance for the design of building blocks and substituents for COFs and further the carbonized carbons,and also exhibits the great potential of substituent engineering in modulating the electrochemical reactivity.展开更多
This paper found that the crystalline volume ratio （Xc） of μc-Si deposited on SiNx substrate is higher than that on 7059 glass. At the same silane concentration （SC） （for example, at SC=2%）, the Xc of μc-Si de...This paper found that the crystalline volume ratio （Xc） of μc-Si deposited on SiNx substrate is higher than that on 7059 glass. At the same silane concentration （SC） （for example, at SC=2%）, the Xc of μc-Si deposited on SiNx is more than 64%, but just 44% if deposited on Conning 7059. It considered that the ‘hills＇ on SiNx substrate would promote the crystalline growth of μc-Si thin film, which has been confirmed by atomic force microscope （AFM） observation. Comparing several thin film transistor （TFT） samples whose active-layer were deposited under various SC, this paper found that the appropriate SC for the μc-Si thin film used in TFT as active layer should be more than 2%, and Xc should be around 50%. Additionally, the stability comparison of μc-Si TFT and a-Si TFT is shown in this paper.展开更多
A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic...A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic acid (AA), 1,4-butanediol (BG) and ethylene glycol (EG) through direct esterification and polycondensation. The sequence structure and crystallinity of the copolyester were investigated by 1H NMR spectroscopy and the wide-angle X-ray diffractometry (WAXD). The analytical results showed that the PBATE copolyester was a random copolymer and the composition of PBATE copolyester was almost consistent with the feed molar ratios. The crystal structure of PBATE copolyester belonged to the triclinic crystalline system; The variation in melting point of the synthesized PBATE copolyester agreed well with the estimation obtained by the Flory equation and was applicable to the random copolymer.展开更多
Polymer solar cells （PSCs） based on poly（3-hexylthiophene） （P3HT） and [6,6]-phenyl-C61-butyric acid methyl ester （PCBM） are fabricated by using 1,8-diiodooctane （DIO） as a solvent additive to control the dop...Polymer solar cells （PSCs） based on poly（3-hexylthiophene） （P3HT） and [6,6]-phenyl-C61-butyric acid methyl ester （PCBM） are fabricated by using 1,8-diiodooctane （DIO） as a solvent additive to control the doping density of the PSCs. It is shown that the processing of DIO does not change the doping density of the P3HT phase, while it causes a dramatic reduction of the doping density of the PCBM phase, which decreases the doping density of the whole blend layer from 3.7 × 10^16 cm-3 to 1.2 ×10^16 cm-3. The reduction of the doping density in the PCBM phase originates from the increasing crystallinity of PCBM with DIO addition, and it leads to a decreasing doping density in the blend film and improves the short circuit current of the PSCs.展开更多
Graphitic carbon nitride(g-C_(3)N_(4))is emerging as a promising visible-light photocatalyst while the low crystallinity with sluggish charge separation/migration dynamics significantly restricts its practical applicat...Graphitic carbon nitride(g-C_(3)N_(4))is emerging as a promising visible-light photocatalyst while the low crystallinity with sluggish charge separation/migration dynamics significantly restricts its practical applications.Currently,synthesizing highly crystalline g-C_(3)N_(4) with sufficient surface activities still remains challenging.Herein,different from using alkali molten salts which is commonly reported,we propose an approach for synthesis of highly crystalline g-C_(3)N_(4) with FeCl3/KCl rock/molten mixed salts.The rock salt can serve as the structure-directing template while molten salt provides the required liquid medium for re-condensation.Intriguingly,the synthesized photocatalyst showed further enhanced crystallinity and improved surface area along with high p/p*excitation compared with crystalline C_(3)N_(4) prepared from conventional molten-salt methods.These catalytically advantageous features lead to its superior photocatalytic and piezocatalytic activities with a high reactivity for overall water splitting that is not commonly reported for C_(3)N_(4).This work provides an effective strategy for structural optimization of organic semiconductor based materials and may inspire new ideas for the design of advanced photocatalysts.展开更多
Nickel(Ni)-rich cathode materials have become promising candidates for the next-generation electrical vehicles due to their high specific capacity.However,the poor thermodynamic stability(including cyclic performance ...Nickel(Ni)-rich cathode materials have become promising candidates for the next-generation electrical vehicles due to their high specific capacity.However,the poor thermodynamic stability(including cyclic performance and safety performance or thermal stability)will restrain their wide commercial application.Herein,a single-crystal Ni-rich Li Ni_(0.83)Co_(0.12)Mn_(0.05)O_(2) cathode material is synthesized and modified by a dual-substitution strategy in which the high-valence doping element improves the structural stability by forming strong metal–oxygen binding forces,while the low-valence doping element eliminates high Li^(+)/Ni^(2+)mixing.As a result,this synergistic dual substitution can effectively suppress H2-H3 phase transition and generation of microcracks,thereby ultimately improving the thermodynamic stability of Ni-rich cathode material.Notably,the dual-doped Ni-rich cathode delivers an extremely high capacity retention of 81%after 250 cycles(vs.Li/Li+)in coin-type half cells and 87%after 1000 cycles(vs.graphite/Li^(+))in pouch-type full cells at a high temperature of 55℃.More impressively,the dual-doped sample exhibits excellent thermal stability,which demonstrates a higher thermal runaway temperature and a lower calorific value.The synergetic effects of this dual-substitution strategy pave a new pathway for addressing the critical challenges of Ni-rich cathode at high temperatures,which will significantly advance the high-energy-density and high-safety cathodes to the subsequent commercialization.展开更多
Peng et al.[Science 379683(2023)]reported an effective method to improve the performance of perovskite solar cells by using thicker porous insulator contact(PIC)-alumina nanoplates.This method overcomes the trade-off ...Peng et al.[Science 379683(2023)]reported an effective method to improve the performance of perovskite solar cells by using thicker porous insulator contact(PIC)-alumina nanoplates.This method overcomes the trade-off between the open-circuit voltage and the fill factor through two mechanisms:reduced surface recombination velocity and increased bulk recombination lifetime due to better perovskite crystallinity.From arguments of drift-diffusion simulations,we find that an increase in mobility and carrier recombination lifetime in bulk are the key factors for minimizing the resistance-effect from thicker PICs and achieving a maximum power conversion efficiency(PCE)at approximately 25%reduced contact area.Furthermore,the partially replacement of perovskite films with thicker PICs would result in a reduction in short-current density,but the relative low refractive index of the PICs imbedded into the high refractive index perovskite creates light trapping structures that compensate for this loss.展开更多
Controlling the epitaxial growth mode of semiconductor layers is crucial for optimizing material properties and device performance.In this work,the growth mode ofα-Ga_(2)O_(3) heteroepitaxial layers was modulated by ...Controlling the epitaxial growth mode of semiconductor layers is crucial for optimizing material properties and device performance.In this work,the growth mode ofα-Ga_(2)O_(3) heteroepitaxial layers was modulated by tuning miscut angles(θ)from 0°to 7°off the(1010)direction of sapphire(0002)substrate.On flat sapphire surfaces,the growth undergoes a typical three-dimensional(3D)growth mode due to the random nucleation on wide substrate terraces,as evidenced by the hillock morphology and high dislocation densities.As the miscut angle increases toθ=5°,the terrace width of sapphire substrate is comparable to the distance between neighboring nuclei,and consequently,the nucleation is guided by terrace edges,which energetically facilitates the growth mode transition into the desirable two-dimensional(2D)coherent growth.Consequently,the mean surface roughness decreases to only 0.62 nm,accompanied by a significant reduction in screw and edge dislocations to 0.16×10^(7) cm^(-2)and 3.58×10^(9) cm^(-2),respectively.However,the further increment of miscut angles toθ=7°shrink the terrace width less than nucleation distance,and the step-bunching growth mode is dominant.In this circumstance,the misfit strain is released in the initial growth stage,resulting in surface morphology degradation and increased dislocation densities.展开更多
Titanium nitride films are prepared by plasma enhanced chemical vapor deposition method on titanium foil using N_(2) as precursor. In order to evaluate the effect of oxygen on the growth of titanium nitride films, a s...Titanium nitride films are prepared by plasma enhanced chemical vapor deposition method on titanium foil using N_(2) as precursor. In order to evaluate the effect of oxygen on the growth of titanium nitride films, a small amount of O_(2) is introduced into the preparation process. The study indicates that trace O_(2) addition into the reaction chamber gives rise to significant changes on the color and micro-morphology of the foil, featuring dense and long nano-wires. The as-synthesized nanostructures are characterized by various methods and identified as TiN, Ti_(2) N, and TiO_(2) respectively. Moreover, the experiment results show that oxide nanowire has a high degree of crystallinity and the nitrides present specific orientation relationships with the titanium matrix.展开更多
In this paper,high-energy Ne ions were used to irradiate Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) metallic glass(MG)and crystalline W to investigate their difference in mechanical response after irradiation.The results showed t...In this paper,high-energy Ne ions were used to irradiate Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) metallic glass(MG)and crystalline W to investigate their difference in mechanical response after irradiation.The results showed that with the irradiation dose increased,the tensile micro-strain increased,nano-hardness increased from 7.11 GPa to 7.90 GPa and 8.62 GPa,Young’s modulus increased,and H3/E2 increased which indicating that the plastic deformability decreased in crystalline W.Under the same irradiation conditions,the Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG still maintained the amorphous structure and became more disordered despite the longer range and stronger displacement damage of Ne ions in Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG than in crystalline W.Unlike the irradiation hardening and embrittlement behavior of crystalline W,Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG showed the gradual decrease in hardness from 6.02 GPa to 5.89 GPa and 5.50 GPa,the decrease in modulus and the increase in plastic deformability with the increasing dose.Possibly,the irradiation softening and toughening phenomenon of Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG could provide new ideas for the design of nuclear materials.展开更多
Chemical inclusions significantly alter shock responses of crystalline explosives in macroscale gap experiments but their microscale dynamics origin remains unclear.Herein shock-induced energy localization,overall phy...Chemical inclusions significantly alter shock responses of crystalline explosives in macroscale gap experiments but their microscale dynamics origin remains unclear.Herein shock-induced energy localization,overall physical responses,and reactions in a-1,3,5-trinitro-1,3,5-triazinane(a-RDX)crystal entrained various chemical inclusions were investigated by the multi-scale shock technique implemented in the reactive molecular dynamics method.Results indicated that energy localization and shock reaction were affected by the intrinsic factors within chemical inclusions,i.e.,phase states,chemical compositions,and concentrations.The atomic origin of chemical-inclusions effects on energy localization is dependent on the dynamics mechanism of interfacial molecules with free space volume,which includes homogeneous intermolecular compression,interfacial impact and shear,and void collapse and jet.As introducing various chemical inclusions,the initiation of those dynamics mechanisms triggers diverse decay rates of bulk RDX molecules and hereby impacts on growth speeds of final reactions.Adding chemical inclusions can reduce the effectiveness of the void during the shock impacting.Under the shockwave velocity of 9 km/s,the parent RDX decay rate in RDX entrained amorphous carbon decreases the most and is about one fourth of that in RDX with a vacuum void,and solid HMX and TATB inclusions are more reactive than amorphous carbon but less reactive than dry air or acetone inclusions.The lessdense shocking system denotes the greater increases in local temperature and stress,the faster energy liberation,and the earlier final reaction into equilibrium,revealing more pronounced responses to the present intense shockwave.The quantitative models associated with the relative system density(RD_(sys))were proposed for indicating energy-localization mechanisms and evaluating initiation safety in the shocked crystalline explosive.RD_(sys)is defined by the density ratio of defective RDX to perfect crystal after dynamics relaxation and reveals the global density characteristic in shocked systems filled with chemical inclusions.When RD_(sys)is below 0.9,local hydrodynamic jet initiated by void collapse dominates upon energy localization instead of interfacial impact.This study sheds light on novel insights for understanding the shock chemistry and physical-based atomic origin in crystalline explosives considering chemical-inclusions effects.展开更多
Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for the construction of solid-state lithium batteries due to their excellent flexibility,scalability,and interface compatibility wit...Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for the construction of solid-state lithium batteries due to their excellent flexibility,scalability,and interface compatibility with electrodes.Herein,a novel all-solid polymer electrolyte(PPLCE)was fabricated by the copolymer network of liquid crystalline monomers and poly(ethylene glycol)dimethacrylate(PEGDMA)acts as a structural frame,combined with poly(ethylene glycol)diglycidyl ether short chain interspersed serving as mobile ion transport entities.The preparaed PPLCEs exhibit excellent mechanical property and out-standing electrochemical performances,which is attributed to their unique three-dimensional cocontinuous structure,characterized by a cross-linked semi-interpenetrating network and an ionic liquid phase,resulting in a distinctive nanostructure with short-range order and long-range disorder.Remarkably,the addition of PEGDMA is proved to be critical to the comprehensive performance of the PPLCEs,which effectively modulates the microscopic morphology of polymer networks and improves the mechanical properties as well as cycling stability of the solid electrolyte.When used in a lithiumion symmetrical battery configuration,the 6 wt%-PPLCE exhibites super stability,sustaining operation for over 2000 h at 30 C,with minimal and consistent overpotential of 50 mV.The resulting Li|PPLCE|LFP solid-state battery demonstrates high discharge specific capacities of 160.9 and 120.1 mA h g^(-1)at current densities of 0.2 and 1 C,respectively.Even after more than 300 cycles at a current density of 0.2 C,it retaines an impressive 73.5%capacity.Moreover,it displayes stable cycling for over 180 cycles at a high current density of 0.5C.The super cycle stability may promote the application for ultralong-life all solid-state lithium metal batteries.展开更多
We performed ultrasonic measurements on a quaternary cubic compound PrRu_(2)In_(2)Zn_(18) to explore the ground state properties derived from non-Kramers Γ_(3) doublet of Pr^(3+).PrRu_(2)In_(2)Zn_(18) is a quaternary...We performed ultrasonic measurements on a quaternary cubic compound PrRu_(2)In_(2)Zn_(18) to explore the ground state properties derived from non-Kramers Γ_(3) doublet of Pr^(3+).PrRu_(2)In_(2)Zn_(18) is a quaternary derivative of the ternary compound PrRu_(2)Zn_(20) that exhibits a structural phase transition at T_S=138 K.In PrRu_(2)In_(2)Zn_(18),the Zn atoms at the 16c site in PrRu_(2)Zn_(20) are selectively replaced by In atoms.A monotonic increase was observed in the temperature dependence of elastic constants C_L=(C_(11)+2C_(12)+4C_(44))/3 and C_(T)=(C_(11)-C_(12)+C_(44))/3 in the temperature range around T_(S) to which an elastic softening was observed in(C_(11)-C_(12))/2 for PrRu_(2)Zn_(20).The disappearance of the softening indicates that the structural transition in PrRu_(2)Zn_(20) is suppressed by the substitution of Zn ions by In ones with a larger ionic radius.Alternatively,the C_(T) of PrRu_(2)In_(2)Zn_(18) exhibits a precursor Curie-type elastic softening toward low temperatures being responsible for the non-Kramers Γ_(3) ground state.We discuss the ground state and the evolution of the elastic properties of the different single-crystal samples of PrRu_(2)In_(2)Zn_(18) grown under different conditions.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52370109)China Postdoctoral Science Foundation(2022M710830)+4 种基金Venture and Innovation Support Program for Chongqing Overseas Returnees(cx2022005)the Natural Science Foun-dation Project of CQ CSTC(CSTB2022NSCQ-MSX1267)Research Project of Chongqing Education Commission Foundation(KJQN201800826)Science and Technology Research Program of Chongqing Municipal Education Commission of China(KJZD-K202100801)Post-doctoral Program Funded by Chongqing,and Chongqing Technology and Business University,China(CXQT21023).
文摘Good crystallinity can reduce the charge recombination centers caused by defects,whilst structures with strong polycondensation have high charge mobility,leading to more charge transfer to the material surface for reaction.Much effort has been put into the preparation of a highly efficient g-C_(3)N_(4) with defects to improve its application potential under the premise in high crystallinity.Hence,this review paper emphasizes the importance to balance the defect and crystallinity of g-C_(3)N_(4).In addition,detailed discussion on the relationship between defects and activity of g-C_(3)N_(4) was carried out based on its applications in environmental purification(e.g.,VOCs oxidation,NO_(x) oxidation,H_(2)O_(2) evolution,sterilization,pesticide oxidation)and energy conversion(H_(2) evolution,N_(2) fixation and CO_(2) reduction).Lastly,the challenge in developing more efficient defective g-C_(3)N_(4) photocatalytic materials is summarized.
基金supported by Beijing Natural Science Foundation (Grant No.2093043)the National Natural Science Foundation of China (Grant No.20606038)
文摘Well-crystallized high-silica NaY zeolites （Si/Al〉2.5） were prepared from a reaction mixture consisting of metakaolin, sodium silicate solution and seed solution via optimization of the mixture composition and reaction conditions. The transformation from kaolin to high-silica NaY zeolite was confirmed by XRD, SEM and IR techniques. Subsequently, the influence of synthesis parameters, i.e. initial SIO2/Al2O3, initial Na2O/SiO2, initial H2O/SiO2, aging time of the seed solution, crystallization temperature and crystallization time, on the NaY growth was investigated in terms of crystallinity and Si/Al ratio. The results showed that the effects of initial SiO2/Al2O3, initial Na2O/SiO2 and initial H2O/ SiO2 on the crystaIlinity and Si/Al ratio of NaY zeolite are similar to those observed in the conventional syntheses of NaY zeolites only using sodium silicate solution as silicon source. However, due to the use of metakaolin as the main silicon and aluminum sources in the present study, a long crystallization induction period of 20 h was achieved, which can be attributed to the dissolution of metakaolin. In addition, different from the conventional syntheses of zeolite NaY, pure NaY zeolites （i.e. without NaP zeolite impurity） were still obtained even at 120℃ because of the use of a large quantity of seed solution （23 wt%） in the reaction mixture. As the aging time of the seed solution increased from 3.5 h to 22 h, the relative crystallinity of the NaY zeolite first increased sharply and then reached a plateau, while the Si/Al ratio first increased rapidly up to a maximum value of 2.75 corresponding to an aging time of 6.5 h, and then decreased sharply with the aging time.
基金Financial support from the Innovation Fund for Elitists of Henan Province,China(No.0221001200)the Talent Training Joint Fund of NSFC-Henan(No.U1204203)the China Postdoctoral Science Foundation(No.2012M511121)
文摘ZSM-5 zeolite microparticles （MPs） were synthesized under hydrothermal condition using a low crystal seed addition approach without template. The synthesis parameters such as the seed addition amount, the SiOJA1203 ratio, the aluminum source, the feeding addition method, aging, and crystallization were investigated. The structure, morphology and composition of the as-synthesized ZSM-5 zeolite MPs were characterized by X-ray powder diffraction （XRD）, scanning electron microscopy （SEM）, laser particle size distribution （PSD） measurements, and inductively coupled plasma-atomic emission spectrometry （ICP-AES）. The SIO2/A1203 ratio of ZSM-5 zeolite MPs was in the range of 20~80. The low seed addition was beneficial to improving the crystallinity and shortening the crystallization time, and the suitable amount of seed was 0.25% （SIO2）. The ZSM-5 zeolite MPs synthesized with aluminium nitrate nonahydrate used as the aluminum source exhibited a relatively high crystallinity. An appropriate aging time could eliminate the effect of feeding addition method and effectively adjust particle size. The particle size of ZSM-5 zeolite obtained at an aging time of 20 h was around 2.0 I.tm. Prolonging the aging time appropriately could also shorten the high-temperature crystallization time. The suitable aging time was 24 h, and the relative crystallinity of ZSM-5 zeolite could reach up to 99% after crystallization for 24 h at 180 ℃
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61474085 and 61704130)the Science Research Plan in Shaanxi Province,China(Grant No.2016GY-085)+1 种基金the Opening Project of Key Laboratory of Microelectronic Devices&Integrated Technology,Institute of Microelectronics,Chinese Academy of Sciences(Grant No.90109162905)the Fundamental Research Funds for the Central Universities,China(Grant No.61704130)
文摘Germanium-tin films with rather high Sn content （28.04% and 29.61%） are deposited directly on Si （100） and Si （111） substrates by magnetron sputtering. The mechanism of the effect of rapid thermal annealing on the Sn surface segregation of Ge1-xSnx films is investigated by x-ray photoelectron spectroscopy （XPS） and atomic force microscopy （AFM）. The x-ray diffraction （XRD） is also performed to determine the crystallinities of the Ge1-xSnx films. The experimental results indicate that root mean square （RMS） values of the annealed samples are comparatively small and have no noticeable changes for the as-grown sample when annealing temperature is below 400℃. The diameter of the Sn three-dimensional （3D） island becomes larger than that of an as-grown sample when the annealing temperature is 700℃. In addition, the Sn surface composition decreases when annealing temperature ranges from 400℃ to 700℃. However, Sn bulk compositions in samples A and B are kept almost unchanged when the annealing temperature is below 600℃. The present investigation demonstrates that the crystallinity of Ge1-xSnx/Si （111） has no obvious advantage over that of Ge1-xSnx/Si （100） and the selection of Si （111） substrate is an effective method to improve the surface morphologies of Ge1-xSnx films. We also find that more severe Sn surface segregation occurs in the Ge1-xSnx/Si （111） sample during annealing than in the Ge1-xSnx/Si （100） sample.
基金supported by the National Natural Science Foundation of China (Nos. 21701107, 51672165, and 51472152)the China Postdoctoral Science Foundation (No. 2016M592897XB)+3 种基金Technology and Natural Science Foundation of Shaanxi (No. 2018JQ5107)Key Program for International S&T Cooperation Projects of Shaanxi ProvinceXi’an Key Laboratory of green manufacture of ceramic materials Foundation No. 2019220214SYS017CG039China Graduate Innovation Fund of Shaanxi University of Science and Technology。
文摘WS2 exhibits tremendous potentials for Na-ions storage owing to high capacity(433 mAh g^(-1)). Nevertheless, WS2 layered structure is often exfoliated with rapid capacity decay and sluggish reaction kinetics.In this work, WS2 nanosheets with different crystallinities are controlled by different synthesis methods.The high crystallinity WS2 exhibits high degree of interlayer order and strong interlayer force. It exhibits superior electrochemical properties, at the current density of 200 mA g^(-1) after 300 cycles with reversible capacity of 471 mAh g^(-1). Even at 5.0 A g^(-1), the capacities can still arrive at 240 mAh g^(-1) after 250 cycles, exhibiting stable cycling performance. Further electrochemical research finds that the high degree of interlayer order of layered WS2 structure can perform highly conducive Na+insertion/extraction with greatly improved contribution of intercalation capacity. Moreover, the strong interlayer force can effectively restrain the exfoliating of the WS2 nanosheets, guaranteeing the stability of the structure. Combining the above result reveals that controlling the order and force of the interlayer is an effective way to enhance the electrochemical properties of WS2 as SIBs anode materials. This work can provide new insight for inhibiting the exfoliation of layered compounds to pursue excellent electrochemical performance in Na-ion storage systems.
基金Project supported by the National Natural Science Foundation of China (Grant No. 60871007)
文摘In this paper, we report a high-perfornmnce P3HT/PCBM bulk-heterojunction solar cell with a power conversion efficiency of 4.85% fabricated by adjusting the polymer crystallinity and nanoscale phase separation using an ultrasonic irradiation mixing approach for the polymer. The grazing incidence X-ray diffraction, UV/Vis spectroscopic, and atomic force microscopic measurement results for the P3HT/PCBM blend films reveal that the P3HT/PCBM film fabricated by ultrasonic irradiation mixing of the P3HT and PCBM solutions for 10 min has a higher degree of crystallinity, a higher absorption efficiency, and better phase separation, which together account for the higher charge transport properties and photovoltaic cell performance.
基金supported by the National Key R&D Program of China (2018YFE0208500)the Japan Science and Technology Agency (JST) Mirai program (JPMJMI17EA)。
文摘As one of the most compelling photovoltaic devices, halide perovskite (PVK) solar cells have achieved a new surprising record power conversion efficiency (PCE) of 25.8%in 2021 [1]. This demonstrates the great potential of halide PVK solar cells as a highly competitive substitute to replace silicon-based solar cells in the photovoltaic market [2–6].
基金supported by the National Natural Science Foundation of China (51603114)the Natural Science Foundation of Shandong Province (ZR2016EMQ03 and ZR2019PB002)the Doctoral Fund of Qingdao Agriculture University (663-1115046 and 663-1117016)。
文摘Covalent organic frameworks(COFs)are emerging as powerful electrochemical energy storage/conversion materials benefiting from the controlled pore and chemical structures,which are usually determined by the regulation of the molecular building blocks.In contrast,the substituents are not considered significant for the electrochemical reactivity as they are usually removed during carbonization,which is necessary for improving the electrical conductivity of an electrode material.Here we show that the substituents play key roles not only in synthesizing COFs but also in controlling the COF structures during carbonization and thus the related electrochemical reactivity.Five characteristic substituents were used when synthesizing a new COF structure and it was found that electron-withdrawing strength of the substituents significantly influences the crystallinity of the COFs by tuning the reactivity of building blocks,or even determines whether the crystalline COF can be constructed.Moreover,the differences in chemical groups,sizes,and thermal stabilities of the substituents result in varied pore-collapse behaviors and the structures of the carbonized COFs,which show diverse effects on the electrochemical performances.An optimal material shows the highest surface area of 2131 m^(2)/g,rich pores around 1 nm,and the highest ratio of sp^(2) carbon among the samples,corresponding to the largest double-layer specific capacity over 125 F/g in an ionic liquid electrolyte,while another material with the lowest surface area and N-doping level exhibits a high H_(2)O_(2) production selectivity over 80%through selective oxygen reduction.This study shows guiding significance for the design of building blocks and substituents for COFs and further the carbonized carbons,and also exhibits the great potential of substituent engineering in modulating the electrochemical reactivity.
基金Project supported by the ‘863＇ Project of National Ministry of Science and Technology （Grant No 2004AA33570）, Key Project of NSFC （Grant No 60437030） and Tianjin Natural Science Foundation （Grant No 05YFJMJC01400）.
文摘This paper found that the crystalline volume ratio （Xc） of μc-Si deposited on SiNx substrate is higher than that on 7059 glass. At the same silane concentration （SC） （for example, at SC=2%）, the Xc of μc-Si deposited on SiNx is more than 64%, but just 44% if deposited on Conning 7059. It considered that the ‘hills＇ on SiNx substrate would promote the crystalline growth of μc-Si thin film, which has been confirmed by atomic force microscope （AFM） observation. Comparing several thin film transistor （TFT） samples whose active-layer were deposited under various SC, this paper found that the appropriate SC for the μc-Si thin film used in TFT as active layer should be more than 2%, and Xc should be around 50%. Additionally, the stability comparison of μc-Si TFT and a-Si TFT is shown in this paper.
文摘A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic acid (AA), 1,4-butanediol (BG) and ethylene glycol (EG) through direct esterification and polycondensation. The sequence structure and crystallinity of the copolyester were investigated by 1H NMR spectroscopy and the wide-angle X-ray diffractometry (WAXD). The analytical results showed that the PBATE copolyester was a random copolymer and the composition of PBATE copolyester was almost consistent with the feed molar ratios. The crystal structure of PBATE copolyester belonged to the triclinic crystalline system; The variation in melting point of the synthesized PBATE copolyester agreed well with the estimation obtained by the Flory equation and was applicable to the random copolymer.
基金Supported by the National Natural Science Foundation of China under Grant Nos 21174016 and 11474017the Doctoral Program of Higher Education of China under Grant No 20120009110031
文摘Polymer solar cells （PSCs） based on poly（3-hexylthiophene） （P3HT） and [6,6]-phenyl-C61-butyric acid methyl ester （PCBM） are fabricated by using 1,8-diiodooctane （DIO） as a solvent additive to control the doping density of the PSCs. It is shown that the processing of DIO does not change the doping density of the P3HT phase, while it causes a dramatic reduction of the doping density of the PCBM phase, which decreases the doping density of the whole blend layer from 3.7 × 10^16 cm-3 to 1.2 ×10^16 cm-3. The reduction of the doping density in the PCBM phase originates from the increasing crystallinity of PCBM with DIO addition, and it leads to a decreasing doping density in the blend film and improves the short circuit current of the PSCs.
基金supported by the National Natural Science Foundation of China(51902045,51904059)Fundamental Research Funds for the Central Universities(N2002005,N2125004,N2225038,N2225044)+2 种基金Applied Basic Research Program of Liaoning(2022JH2/101300200)Young Elite Scientist Sponsorship Program by CAST(YESS)2019-2021QNRCNational Research Foundation of Korea(NRF)grant funded by the Korean government(Ministry of Science,ICT&Future Planning)(NRF-2020R1F1A1075601 and NRF-2021R1A4A2001658).
文摘Graphitic carbon nitride(g-C_(3)N_(4))is emerging as a promising visible-light photocatalyst while the low crystallinity with sluggish charge separation/migration dynamics significantly restricts its practical applications.Currently,synthesizing highly crystalline g-C_(3)N_(4) with sufficient surface activities still remains challenging.Herein,different from using alkali molten salts which is commonly reported,we propose an approach for synthesis of highly crystalline g-C_(3)N_(4) with FeCl3/KCl rock/molten mixed salts.The rock salt can serve as the structure-directing template while molten salt provides the required liquid medium for re-condensation.Intriguingly,the synthesized photocatalyst showed further enhanced crystallinity and improved surface area along with high p/p*excitation compared with crystalline C_(3)N_(4) prepared from conventional molten-salt methods.These catalytically advantageous features lead to its superior photocatalytic and piezocatalytic activities with a high reactivity for overall water splitting that is not commonly reported for C_(3)N_(4).This work provides an effective strategy for structural optimization of organic semiconductor based materials and may inspire new ideas for the design of advanced photocatalysts.
基金financially supported by the Natural Science Foundation of Jiangsu Province,China (BK20210887)the Jiangsu Provincial Double Innovation Program,China (JSSCB20210984)+1 种基金the Natural Science Fund for Colleges and Universities of Jiangsu Province,China (21KJB450003)the Jiangsu University of Science and Technology Doctoral Research Start-up Fund,China (120200012)。
文摘Nickel(Ni)-rich cathode materials have become promising candidates for the next-generation electrical vehicles due to their high specific capacity.However,the poor thermodynamic stability(including cyclic performance and safety performance or thermal stability)will restrain their wide commercial application.Herein,a single-crystal Ni-rich Li Ni_(0.83)Co_(0.12)Mn_(0.05)O_(2) cathode material is synthesized and modified by a dual-substitution strategy in which the high-valence doping element improves the structural stability by forming strong metal–oxygen binding forces,while the low-valence doping element eliminates high Li^(+)/Ni^(2+)mixing.As a result,this synergistic dual substitution can effectively suppress H2-H3 phase transition and generation of microcracks,thereby ultimately improving the thermodynamic stability of Ni-rich cathode material.Notably,the dual-doped Ni-rich cathode delivers an extremely high capacity retention of 81%after 250 cycles(vs.Li/Li+)in coin-type half cells and 87%after 1000 cycles(vs.graphite/Li^(+))in pouch-type full cells at a high temperature of 55℃.More impressively,the dual-doped sample exhibits excellent thermal stability,which demonstrates a higher thermal runaway temperature and a lower calorific value.The synergetic effects of this dual-substitution strategy pave a new pathway for addressing the critical challenges of Ni-rich cathode at high temperatures,which will significantly advance the high-energy-density and high-safety cathodes to the subsequent commercialization.
基金Project supported by the Qing-Lan Project from Yangzhou Universitythe National Natural Science Foundation of China (Grant No. 62375234)
文摘Peng et al.[Science 379683(2023)]reported an effective method to improve the performance of perovskite solar cells by using thicker porous insulator contact(PIC)-alumina nanoplates.This method overcomes the trade-off between the open-circuit voltage and the fill factor through two mechanisms:reduced surface recombination velocity and increased bulk recombination lifetime due to better perovskite crystallinity.From arguments of drift-diffusion simulations,we find that an increase in mobility and carrier recombination lifetime in bulk are the key factors for minimizing the resistance-effect from thicker PICs and achieving a maximum power conversion efficiency(PCE)at approximately 25%reduced contact area.Furthermore,the partially replacement of perovskite films with thicker PICs would result in a reduction in short-current density,but the relative low refractive index of the PICs imbedded into the high refractive index perovskite creates light trapping structures that compensate for this loss.
基金Project supported by the National Key Research and Development Program of China (Grant No.2022YFB3605403)the National Natural Science Foundation of China (Grant Nos.62234007,62241407,62293521,62304238,62241407,U21A20503,and U21A2071)+2 种基金the Key-Area Research and Development Program of Guangdong Province,China (Grant No.2020B010174002)the Cultivation Project for Youth Teachers in Jiangsu ProvinceJiangsu Funding Program for Excellent Postdoctoral Talent。
文摘Controlling the epitaxial growth mode of semiconductor layers is crucial for optimizing material properties and device performance.In this work,the growth mode ofα-Ga_(2)O_(3) heteroepitaxial layers was modulated by tuning miscut angles(θ)from 0°to 7°off the(1010)direction of sapphire(0002)substrate.On flat sapphire surfaces,the growth undergoes a typical three-dimensional(3D)growth mode due to the random nucleation on wide substrate terraces,as evidenced by the hillock morphology and high dislocation densities.As the miscut angle increases toθ=5°,the terrace width of sapphire substrate is comparable to the distance between neighboring nuclei,and consequently,the nucleation is guided by terrace edges,which energetically facilitates the growth mode transition into the desirable two-dimensional(2D)coherent growth.Consequently,the mean surface roughness decreases to only 0.62 nm,accompanied by a significant reduction in screw and edge dislocations to 0.16×10^(7) cm^(-2)and 3.58×10^(9) cm^(-2),respectively.However,the further increment of miscut angles toθ=7°shrink the terrace width less than nucleation distance,and the step-bunching growth mode is dominant.In this circumstance,the misfit strain is released in the initial growth stage,resulting in surface morphology degradation and increased dislocation densities.
基金Project supported by the Innovation Funding of Beijing Institute of Aeronautical Materials。
文摘Titanium nitride films are prepared by plasma enhanced chemical vapor deposition method on titanium foil using N_(2) as precursor. In order to evaluate the effect of oxygen on the growth of titanium nitride films, a small amount of O_(2) is introduced into the preparation process. The study indicates that trace O_(2) addition into the reaction chamber gives rise to significant changes on the color and micro-morphology of the foil, featuring dense and long nano-wires. The as-synthesized nanostructures are characterized by various methods and identified as TiN, Ti_(2) N, and TiO_(2) respectively. Moreover, the experiment results show that oxide nanowire has a high degree of crystallinity and the nitrides present specific orientation relationships with the titanium matrix.
基金supported by National Natural Science Foundation of China(Nos.12305224,U23B2099 and 11975065)the Natural Science Foundation of Liaoning Province(No.2021-BS-223)+1 种基金the Liaoning Provincial Department of Education Youth Fund Project(No.LJKQZ20222309)supports from the National Laboratory of Heavy-ion Research Facility(HIRFL)in the Institute of Modern Physics in Lanzhou,China.
文摘In this paper,high-energy Ne ions were used to irradiate Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) metallic glass(MG)and crystalline W to investigate their difference in mechanical response after irradiation.The results showed that with the irradiation dose increased,the tensile micro-strain increased,nano-hardness increased from 7.11 GPa to 7.90 GPa and 8.62 GPa,Young’s modulus increased,and H3/E2 increased which indicating that the plastic deformability decreased in crystalline W.Under the same irradiation conditions,the Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG still maintained the amorphous structure and became more disordered despite the longer range and stronger displacement damage of Ne ions in Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG than in crystalline W.Unlike the irradiation hardening and embrittlement behavior of crystalline W,Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG showed the gradual decrease in hardness from 6.02 GPa to 5.89 GPa and 5.50 GPa,the decrease in modulus and the increase in plastic deformability with the increasing dose.Possibly,the irradiation softening and toughening phenomenon of Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG could provide new ideas for the design of nuclear materials.
基金the financial support from National Natural Science Foundation of China(Grant Nos.11872119,12172051,and 11972329)Natural Science Foundation of Hubei Province(Grant No.2021CFB120)。
文摘Chemical inclusions significantly alter shock responses of crystalline explosives in macroscale gap experiments but their microscale dynamics origin remains unclear.Herein shock-induced energy localization,overall physical responses,and reactions in a-1,3,5-trinitro-1,3,5-triazinane(a-RDX)crystal entrained various chemical inclusions were investigated by the multi-scale shock technique implemented in the reactive molecular dynamics method.Results indicated that energy localization and shock reaction were affected by the intrinsic factors within chemical inclusions,i.e.,phase states,chemical compositions,and concentrations.The atomic origin of chemical-inclusions effects on energy localization is dependent on the dynamics mechanism of interfacial molecules with free space volume,which includes homogeneous intermolecular compression,interfacial impact and shear,and void collapse and jet.As introducing various chemical inclusions,the initiation of those dynamics mechanisms triggers diverse decay rates of bulk RDX molecules and hereby impacts on growth speeds of final reactions.Adding chemical inclusions can reduce the effectiveness of the void during the shock impacting.Under the shockwave velocity of 9 km/s,the parent RDX decay rate in RDX entrained amorphous carbon decreases the most and is about one fourth of that in RDX with a vacuum void,and solid HMX and TATB inclusions are more reactive than amorphous carbon but less reactive than dry air or acetone inclusions.The lessdense shocking system denotes the greater increases in local temperature and stress,the faster energy liberation,and the earlier final reaction into equilibrium,revealing more pronounced responses to the present intense shockwave.The quantitative models associated with the relative system density(RD_(sys))were proposed for indicating energy-localization mechanisms and evaluating initiation safety in the shocked crystalline explosive.RD_(sys)is defined by the density ratio of defective RDX to perfect crystal after dynamics relaxation and reveals the global density characteristic in shocked systems filled with chemical inclusions.When RD_(sys)is below 0.9,local hydrodynamic jet initiated by void collapse dominates upon energy localization instead of interfacial impact.This study sheds light on novel insights for understanding the shock chemistry and physical-based atomic origin in crystalline explosives considering chemical-inclusions effects.
基金supported by the National Natural Science Foundation of China(52003293,51927806,52272258)the Fundamental Research Funds for the Central Universities(2023ZKPYJD07)the Beijing Nova Program(20220484214).
文摘Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for the construction of solid-state lithium batteries due to their excellent flexibility,scalability,and interface compatibility with electrodes.Herein,a novel all-solid polymer electrolyte(PPLCE)was fabricated by the copolymer network of liquid crystalline monomers and poly(ethylene glycol)dimethacrylate(PEGDMA)acts as a structural frame,combined with poly(ethylene glycol)diglycidyl ether short chain interspersed serving as mobile ion transport entities.The preparaed PPLCEs exhibit excellent mechanical property and out-standing electrochemical performances,which is attributed to their unique three-dimensional cocontinuous structure,characterized by a cross-linked semi-interpenetrating network and an ionic liquid phase,resulting in a distinctive nanostructure with short-range order and long-range disorder.Remarkably,the addition of PEGDMA is proved to be critical to the comprehensive performance of the PPLCEs,which effectively modulates the microscopic morphology of polymer networks and improves the mechanical properties as well as cycling stability of the solid electrolyte.When used in a lithiumion symmetrical battery configuration,the 6 wt%-PPLCE exhibites super stability,sustaining operation for over 2000 h at 30 C,with minimal and consistent overpotential of 50 mV.The resulting Li|PPLCE|LFP solid-state battery demonstrates high discharge specific capacities of 160.9 and 120.1 mA h g^(-1)at current densities of 0.2 and 1 C,respectively.Even after more than 300 cycles at a current density of 0.2 C,it retaines an impressive 73.5%capacity.Moreover,it displayes stable cycling for over 180 cycles at a high current density of 0.5C.The super cycle stability may promote the application for ultralong-life all solid-state lithium metal batteries.
基金Project supported by the Soft-Path Science and Engineering Research Center (SPERC),Iwate Universitythe JSPS KAKENHI (Grant Nos. JP18K03530,JP21K04622, and JP21K13869)。
文摘We performed ultrasonic measurements on a quaternary cubic compound PrRu_(2)In_(2)Zn_(18) to explore the ground state properties derived from non-Kramers Γ_(3) doublet of Pr^(3+).PrRu_(2)In_(2)Zn_(18) is a quaternary derivative of the ternary compound PrRu_(2)Zn_(20) that exhibits a structural phase transition at T_S=138 K.In PrRu_(2)In_(2)Zn_(18),the Zn atoms at the 16c site in PrRu_(2)Zn_(20) are selectively replaced by In atoms.A monotonic increase was observed in the temperature dependence of elastic constants C_L=(C_(11)+2C_(12)+4C_(44))/3 and C_(T)=(C_(11)-C_(12)+C_(44))/3 in the temperature range around T_(S) to which an elastic softening was observed in(C_(11)-C_(12))/2 for PrRu_(2)Zn_(20).The disappearance of the softening indicates that the structural transition in PrRu_(2)Zn_(20) is suppressed by the substitution of Zn ions by In ones with a larger ionic radius.Alternatively,the C_(T) of PrRu_(2)In_(2)Zn_(18) exhibits a precursor Curie-type elastic softening toward low temperatures being responsible for the non-Kramers Γ_(3) ground state.We discuss the ground state and the evolution of the elastic properties of the different single-crystal samples of PrRu_(2)In_(2)Zn_(18) grown under different conditions.
