Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction(ORR).Atomic ordered intermetallic compounds(IMC)provide unique electronic and geometri...Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction(ORR).Atomic ordered intermetallic compounds(IMC)provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms,thus exhibiting superior electrocata-lytic activity and durability.However,quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging.Herein,a series of ternary Pt_(2)NiCo interme-tallic catalysts(o-Pt_(2)NiCo)with different ordering degree were synthesized by annealing temperature modulation.Among them,the o-Pt_(2)NiCo which annealed at 800℃for two hours exhibits the highest ordering degree and the optimal ORR ac-tivity,which the mass activity of o-Pt_(2)NiCo is 1.8 times and 2.8 times higher than that of disordered Pt_(2)NiCo alloy and Pt/C.Furthermore,the o-Pt_(2)NiCo still maintains 70.8%mass activity after 30,000 potential cycles.Additionally,the ORR activity test results for Pt_(2)NiCo IMC with different ordering degree also provide a positive correlation between the ordering degree and ORR activity.This work provides a prospective design direction for ternary Pt-based electrocatalysts.展开更多
Delay aware routing is now widely used to provide efficient network transmission. However, for newly developing or developed mobile communication networks(MCN), only limited delay data can be obtained. In such a netwo...Delay aware routing is now widely used to provide efficient network transmission. However, for newly developing or developed mobile communication networks(MCN), only limited delay data can be obtained. In such a network, the delay is with epistemic uncertainty, which makes the traditional routing scheme based on deterministic theory or probability theory not applicable. Motivated by this problem, the MCN with epistemic uncertainty is first summarized as a dynamic uncertain network based on uncertainty theory, which is widely applied to model epistemic uncertainties. Then by modeling the uncertain end-toend delay, a new delay bounded routing scheme is proposed to find the path with the maximum belief degree that satisfies the delay threshold for the dynamic uncertain network. Finally, a lowEarth-orbit satellite communication network(LEO-SCN) is used as a case to verify the effectiveness of our routing scheme. It is first modeled as a dynamic uncertain network, and then the delay bounded paths with the maximum belief degree are computed and compared under different delay thresholds.展开更多
Non-uniform linear array(NULA)configurations are well renowned due to their structural ability for providing increased degrees of freedom(DOF)and wider array aperture than uniform linear arrays(ULAs).These characteris...Non-uniform linear array(NULA)configurations are well renowned due to their structural ability for providing increased degrees of freedom(DOF)and wider array aperture than uniform linear arrays(ULAs).These characteristics play a significant role in improving the direction-of-arrival(DOA)estimation accuracy.However,most of the existing NULA geometries are primarily applicable to circular sources(CSs),while they limitedly improve the DOF and continuous virtual aperture for noncircular sources(NCSs).Toward this purpose,we present a triaddisplaced ULAs(Tdis-ULAs)configuration for NCS.The TdisULAs structure generally consists of three ULAs,which are appropriately placed.The proposed antenna array approach fully exploits the non-circular characteristics of the sources.Given the same number of elements,the Tdis-ULAs design achieves more DOF and larger hole-free co-array aperture than its sparse array competitors.Advantageously,the number of uniform DOF,optimal distribution of elements among the ULAs,and precise element positions are uniquely determined by the closed-form expressions.Moreover,the proposed array also produces a filled resulting co-array.Numerical simulations are conducted to show the performance advantages of the proposed Tdis-ULAs configuration over its counterpart designs.展开更多
Separation and recognition of radar signals is the key function of modern radar reconnaissance,which is of great sig-nificance for electronic countermeasures and anti-countermea-sures.In order to improve the ability o...Separation and recognition of radar signals is the key function of modern radar reconnaissance,which is of great sig-nificance for electronic countermeasures and anti-countermea-sures.In order to improve the ability of separating mixed signals in complex electromagnetic environment,a blind source separa-tion algorithm based on degree of cyclostationarity(DCS)crite-rion is constructed in this paper.Firstly,the DCS criterion is con-structed by using the cyclic spectrum theory.Then the algo-rithm flow of blind source separation is designed based on DCS criterion.At the same time,Givens matrix is constructed to make the blind source separation algorithm suitable for multiple sig-nals with different cyclostationary frequencies.The feasibility of this method is further proved.The theoretical and simulation results show that the algorithm can effectively separate and re-cognize common multi-radar signals.展开更多
The oxidative desulphurization process of coal with different metamorphism degrees treated by an air-steam mixture has been studied.It has been shown that the pyrite present in black coal and anthracite is oxidized wi...The oxidative desulphurization process of coal with different metamorphism degrees treated by an air-steam mixture has been studied.It has been shown that the pyrite present in black coal and anthracite is oxidized with the sulphur dioxide formation,and the process chemical mechanism does not depend on the quality of organic matter.The medium-metamorphized coal,capable of turning into a plastic state and cake in the range of investigated temperatures(350～450 ℃),is desulphurized with the greatest difficulty.The chemical mechanism dealing with the transformations of pyritic sulphur present in brown coal differs from similar processes taking place in black coal and anthracite,because FeS2 is converted with hydrogen sulphide formation at desulphurization.展开更多
With respect to the decision making problems where a lot of fuzzy and grey information always exists in the real-life decision making information system methods as fuzzy mathematics, it is difficult for such uncertain...With respect to the decision making problems where a lot of fuzzy and grey information always exists in the real-life decision making information system methods as fuzzy mathematics, it is difficult for such uncertainty probability, and interval numbers to deal with. To this end, based on the thought and method of grey numbers, grey degrees and interval numbers, the concept of dominance grey degree is defined. And then a method of ranking interval grey numbers based on the dominance grey degree is proposed. After discussing the relevant properties, the paper finally uses an example to demonstrate the effectiveness and applicability of the model. The result shows that the proposed model can more accurately describe uncertainty decision making problems, and realize the total ordering process for multiple-attribute decision-making problems.展开更多
In order to precisely predict the hazard degree of goaf(HDG), the RS-TOPSIS model was built based on the results of expert investigation. To evaluate the HDG in the underground mine, five structure size factors, i.e. ...In order to precisely predict the hazard degree of goaf(HDG), the RS-TOPSIS model was built based on the results of expert investigation. To evaluate the HDG in the underground mine, five structure size factors, i.e. goaf span, exposed area, goaf height, goaf depth, and pillar width, were selected as the evaluation indexes. And based on rough dependability in rough set(RS)theory, the weights of evaluation indexes were identified by calculating rough dependability between evaluation indexes and evaluation results. Fourty goafs in some mines of western China, whose indexes parameters were measured by cavity monitoring system(CMS), were taken as evaluation objects. In addition, the characteristic parameters of five grades' typical goafs were built according to the interval limits value of single index evaluation. Then, using the technique for order preference by similarity to ideal solution(TOPSIS), five-category classification of HDG was realized based on closeness degree, and the HDG was also identified.Results show that the five-category identification of mine goafs could be realized by RS-TOPSIS method, based on the structure-scale-effect. The classification results are consistent with those of numerical simulation based on stress and displacement,while the coincidence rate is up to 92.5%. Furthermore, the results are more conservative to safety evaluation than numerical simulation, thus demonstrating that the proposed method is more easier, reasonable and more definite for HDG identification.展开更多
The explosive reaction degree and protection from explosions are concerns in the military field.In this work,the reaction degree of the composition B explosive was investigated experimentally.Multi-layered compound st...The explosive reaction degree and protection from explosions are concerns in the military field.In this work,the reaction degree of the composition B explosive was investigated experimentally.Multi-layered compound structures were used as barriers to weaken the blast loads.A comprehensive experiment using a high-speed camera and image processing techniques,side witness plates,and bottom witness plates was presented.Using the experimental fragment velocities,fragment piercing patterns,and damage characteristics,the reaction degree of the explosive impeded by different multi-layered compound structures could be precisely differentiated.Reaction parameters of the explosive obstructed by compound structures were obtained by theoretical analysis and numerical simulations.Unlike the common method in which the explosive reaction degree is only distinguished based on the initial pressure amplitude transmitted into the explosive,a following shock wave reflected from the side steel casing was also considered.Different detonation growth paths in the explosive formed.Therefore,all these shock wave propagation characteristics must be considered to analyze the explosive response impeded by compound structures.展开更多
Serving as gas diffusion layers(GDLs),the thermal conductivity of carbon paper(CP)plays a significant role in the heat transfer management in fuel cells.In the present study,the effect of graphitization degree of CP o...Serving as gas diffusion layers(GDLs),the thermal conductivity of carbon paper(CP)plays a significant role in the heat transfer management in fuel cells.In the present study,the effect of graphitization degree of CP on its through plane thermal conductivity and in-plane thermal conductivity is investigated.The relationship between heat treatment temperatures(1800,2000,2200,2400 and 2500℃)and graphitization degree is also investigated by SEM,XRD and Raman measurements.A model for CP under different graphitization degree is suggested considering the thermal conductivity difference of carbon fiber and matrix carbon.The experimental and simulation results are compared.The results show that the graphitization degree has a significant impact on the through-plane thermal conductivity and in plane thermal conductivity.展开更多
Laboratory tests were performed on Toyoura sand specimens to investigate the relationship between degree of saturation Sr, B-value and P-wave velocity Vp. Different types of pore water （de-aired water or tap water） ...Laboratory tests were performed on Toyoura sand specimens to investigate the relationship between degree of saturation Sr, B-value and P-wave velocity Vp. Different types of pore water （de-aired water or tap water） and pore gas （air or CO2） as well as different magnitudes of back pressure were used to achieve different Sr （or B-value）. The measured relationship between B-value and Vp was not consistent with the theoretical prediction. The measurement shows that the Vp value in the specimen flushed with de-aired water is independent of B-value （or St） and is always around the one in fully saturated condition. However, the Vp value in the specimen flushed with tap water increases with B-value, but the shape of the relationship between Vp and B-value is quite different from the theoretical prediction. The possible explanation for the discrepancy between laboratory measurement and theoretical prediction lies in that the air exists in the water as air bubbles and therefore the pore fluid （air-water mixture） is heterogeneous instead of homogenous assumed in the theoretical prediction.展开更多
5Cu/(10NiO-NiFe2O4) cermet inert anodes were prepared by cold-pressing and sintering process, and the effect of superheat degree of melting K3AlF6-Na3AlF6-AlF3 on their anticorrosion performance was studied under elec...5Cu/(10NiO-NiFe2O4) cermet inert anodes were prepared by cold-pressing and sintering process, and the effect of superheat degree of melting K3AlF6-Na3AlF6-AlF3 on their anticorrosion performance was studied under electrolysis conditions. The results show that, the fluctuation of cell becomes small with increasing of superheat degree, which is helpful to inhibit the formation of cathodic encrustation; the concentration of impurities from inert anode in bath goes up to certain degree, but it is far smaller than those in traditional high-temperature bath. Increasing the superheat degree of melting K3AlF6-Na3AlF6-AlF3 has unconspicuous effect on the contents of impurities in cathodic aluminum. The total mass fractions of Fe, Ni and Cu in aluminum are 15.38% and 15.09% respectively under superheat degree of 95 and 195 ℃. From micro-topography of anode used view, increasing the superheat degree can aggravate corrosion of metal Cu in inert anode, and has negative influence on electrical conductivity of electrode to some extent.展开更多
Partial cooperation formulation is a more viable option than optimistic＇s and pessimistic＇s to solve an ill-posed bilevel programming problem.Aboussoror＇s partial cooperation model uses a constant as a cooperation ...Partial cooperation formulation is a more viable option than optimistic＇s and pessimistic＇s to solve an ill-posed bilevel programming problem.Aboussoror＇s partial cooperation model uses a constant as a cooperation index to describe the degree of follower＇s cooperation.The constant only indicates the leader＇s expectation coefficient for the follower＇s action,not the follower＇s own willingness.To solve this situation,a new model is proposed by using the follower＇s satisfactory degree as the cooperation degree.Then,because this new cooperation degree is a function which is dependent on the leader＇s choice and decided by the follower＇s satisfactory degree,this paper proves such proposed model not only leads an optimal value between the optimistic value and pessimistic＇s,but also leads a more satisfactory solution than Aboussoror＇s.Finally,a numerical experiment is given to demonstrate the feasibility of this new model.展开更多
A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were c...A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange's equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by62.93% on average, which demonstrates the feasibility of NTESSMDF.展开更多
Based on rough similarity degree of rough sets and close degree of fuzzy sets, the definitions of rough similarity degree and rough close degree of rough fuzzy sets are given, which can be used to measure the similar ...Based on rough similarity degree of rough sets and close degree of fuzzy sets, the definitions of rough similarity degree and rough close degree of rough fuzzy sets are given, which can be used to measure the similar degree between two rough fuzzy sets. The properties and theorems are listed. Using the two new measures, the method of clustering in the rough fuzzy system can be obtained. After clustering, the new fuzzy sample can be recognized by the principle of maximal similarity degree.展开更多
An improvement of tolerance relation is proposed in regard to rough set model based on connection degree by which reflexivity of relation can be assured without loss of information. Then, a method to determine optimal...An improvement of tolerance relation is proposed in regard to rough set model based on connection degree by which reflexivity of relation can be assured without loss of information. Then, a method to determine optimal identity degree based on relative positive region is proposed so that the identity degree can be computed in an objective method without any preliminary or additional information about data, which is consistent with the notion of objectivity in rough set theory and data mining theory. Subsequently, an algorithm is proposed, and in two examples, the global optimum identity degree is found out. Finally, in regard to optimum connection degree, the method of rules extraction for connection degree rough set model based on generalization function is presented by which the rules extracted from a decision table are enumerated.展开更多
The definition of rough similarity degree is given based on the axiomatic similarity degree, and the properties of rough similarity degree are listed. Using the properties of rough similarity degree, the method of clu...The definition of rough similarity degree is given based on the axiomatic similarity degree, and the properties of rough similarity degree are listed. Using the properties of rough similarity degree, the method of clustering in rough systems can be obtained. After clustering, a new sample can be recognized by the principle of maximal rough similarity degree.展开更多
LT codes are practical realization of digital fountain codes, which provides the concept of rateless coding. In this scheme, encoded symbols are generated infinitely from k information symbols. Decoder uses only(1+α)...LT codes are practical realization of digital fountain codes, which provides the concept of rateless coding. In this scheme, encoded symbols are generated infinitely from k information symbols. Decoder uses only(1+α)k number of encoded symbols to recover the original information. The degree distribution function in the LT codes helps to generate a random graph also referred as tanner graph. The artifact of tanner graph is responsible for computational complexity and overhead in the LT codes. Intuitively, a well designed degree distribution can be used for an efficient implementation of LT codes. The degree distribution function is studied as a function of power law, and LT codes are classified into two different categories: SFLT and RLT codes. Also, two different degree distributions are proposed and analyzed for SFLT codes which guarantee optimal performance in terms of computational complexity and overhead.展开更多
The even degree of chicken population could be estimated by the coefficient of variation or the percentage of the chicken whose body weights were not higher and lower than average body weight by 15% in the sampling po...The even degree of chicken population could be estimated by the coefficient of variation or the percentage of the chicken whose body weights were not higher and lower than average body weight by 15% in the sampling population.In fact,the two indexes were relative to each other.On the basis of analyzing the relationship between the two expectations,the expectations which had been worked out independently were corrected in this paper.展开更多
基金supported by the National Natural Science Foundation(22279036)the Innovation and Talent Recruitment Base of New Energy Chemistry and Device(B21003).
文摘Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction(ORR).Atomic ordered intermetallic compounds(IMC)provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms,thus exhibiting superior electrocata-lytic activity and durability.However,quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging.Herein,a series of ternary Pt_(2)NiCo interme-tallic catalysts(o-Pt_(2)NiCo)with different ordering degree were synthesized by annealing temperature modulation.Among them,the o-Pt_(2)NiCo which annealed at 800℃for two hours exhibits the highest ordering degree and the optimal ORR ac-tivity,which the mass activity of o-Pt_(2)NiCo is 1.8 times and 2.8 times higher than that of disordered Pt_(2)NiCo alloy and Pt/C.Furthermore,the o-Pt_(2)NiCo still maintains 70.8%mass activity after 30,000 potential cycles.Additionally,the ORR activity test results for Pt_(2)NiCo IMC with different ordering degree also provide a positive correlation between the ordering degree and ORR activity.This work provides a prospective design direction for ternary Pt-based electrocatalysts.
基金National Natural Science Foundation of China (61773044,62073009)National key Laboratory of Science and Technology on Reliability and Environmental Engineering(WDZC2019601A301)。
文摘Delay aware routing is now widely used to provide efficient network transmission. However, for newly developing or developed mobile communication networks(MCN), only limited delay data can be obtained. In such a network, the delay is with epistemic uncertainty, which makes the traditional routing scheme based on deterministic theory or probability theory not applicable. Motivated by this problem, the MCN with epistemic uncertainty is first summarized as a dynamic uncertain network based on uncertainty theory, which is widely applied to model epistemic uncertainties. Then by modeling the uncertain end-toend delay, a new delay bounded routing scheme is proposed to find the path with the maximum belief degree that satisfies the delay threshold for the dynamic uncertain network. Finally, a lowEarth-orbit satellite communication network(LEO-SCN) is used as a case to verify the effectiveness of our routing scheme. It is first modeled as a dynamic uncertain network, and then the delay bounded paths with the maximum belief degree are computed and compared under different delay thresholds.
基金supported by the National Natural Science Foundation of China(62031017,61971221)the Fundamental Research Funds for the Central Universities of China(NP2020104)。
文摘Non-uniform linear array(NULA)configurations are well renowned due to their structural ability for providing increased degrees of freedom(DOF)and wider array aperture than uniform linear arrays(ULAs).These characteristics play a significant role in improving the direction-of-arrival(DOA)estimation accuracy.However,most of the existing NULA geometries are primarily applicable to circular sources(CSs),while they limitedly improve the DOF and continuous virtual aperture for noncircular sources(NCSs).Toward this purpose,we present a triaddisplaced ULAs(Tdis-ULAs)configuration for NCS.The TdisULAs structure generally consists of three ULAs,which are appropriately placed.The proposed antenna array approach fully exploits the non-circular characteristics of the sources.Given the same number of elements,the Tdis-ULAs design achieves more DOF and larger hole-free co-array aperture than its sparse array competitors.Advantageously,the number of uniform DOF,optimal distribution of elements among the ULAs,and precise element positions are uniquely determined by the closed-form expressions.Moreover,the proposed array also produces a filled resulting co-array.Numerical simulations are conducted to show the performance advantages of the proposed Tdis-ULAs configuration over its counterpart designs.
基金supported by the National Natural Science Foundation of China(61502522).
文摘Separation and recognition of radar signals is the key function of modern radar reconnaissance,which is of great sig-nificance for electronic countermeasures and anti-countermea-sures.In order to improve the ability of separating mixed signals in complex electromagnetic environment,a blind source separa-tion algorithm based on degree of cyclostationarity(DCS)crite-rion is constructed in this paper.Firstly,the DCS criterion is con-structed by using the cyclic spectrum theory.Then the algo-rithm flow of blind source separation is designed based on DCS criterion.At the same time,Givens matrix is constructed to make the blind source separation algorithm suitable for multiple sig-nals with different cyclostationary frequencies.The feasibility of this method is further proved.The theoretical and simulation results show that the algorithm can effectively separate and re-cognize common multi-radar signals.
文摘The oxidative desulphurization process of coal with different metamorphism degrees treated by an air-steam mixture has been studied.It has been shown that the pyrite present in black coal and anthracite is oxidized with the sulphur dioxide formation,and the process chemical mechanism does not depend on the quality of organic matter.The medium-metamorphized coal,capable of turning into a plastic state and cake in the range of investigated temperatures(350～450 ℃),is desulphurized with the greatest difficulty.The chemical mechanism dealing with the transformations of pyritic sulphur present in brown coal differs from similar processes taking place in black coal and anthracite,because FeS2 is converted with hydrogen sulphide formation at desulphurization.
基金supported by the National Natural Science Foundation of China(7117310471171113+8 种基金70901041712712267130107571301064)the Humanities and Social Sciences of Education Ministry(12YJC630262)the Jiangsu Province University Philosophy and Social Sciences for Key Research Program(2012ZDIXM030)the Jiangsu Innovation Program for Graduate Education and the Fundamental Research Funds for the Central Universities(CXLX12 0175)the Nanjing University of Aeronautics and Astronautics(NUAA)Innovation and Excellence Program for PHD Dissertation(BCXJ12-12)NUAA Program for I-U-R(NC2012006)
文摘With respect to the decision making problems where a lot of fuzzy and grey information always exists in the real-life decision making information system methods as fuzzy mathematics, it is difficult for such uncertainty probability, and interval numbers to deal with. To this end, based on the thought and method of grey numbers, grey degrees and interval numbers, the concept of dominance grey degree is defined. And then a method of ranking interval grey numbers based on the dominance grey degree is proposed. After discussing the relevant properties, the paper finally uses an example to demonstrate the effectiveness and applicability of the model. The result shows that the proposed model can more accurately describe uncertainty decision making problems, and realize the total ordering process for multiple-attribute decision-making problems.
基金Project(51074178)supported by the National Natural Science Foundation of ChinaProject(2011ssxt274)supported by the Graduated Students’ Research and Innovation Foundation of Central South University of China+1 种基金Project(2011QNZT087)supported by the Graduated Students’ Free Exploration Foundation of Central South University of ChinaProject(1343-76140000011)supported by Scholarship Award for Excellent Doctoral Student granted by Ministry of Education,China
文摘In order to precisely predict the hazard degree of goaf(HDG), the RS-TOPSIS model was built based on the results of expert investigation. To evaluate the HDG in the underground mine, five structure size factors, i.e. goaf span, exposed area, goaf height, goaf depth, and pillar width, were selected as the evaluation indexes. And based on rough dependability in rough set(RS)theory, the weights of evaluation indexes were identified by calculating rough dependability between evaluation indexes and evaluation results. Fourty goafs in some mines of western China, whose indexes parameters were measured by cavity monitoring system(CMS), were taken as evaluation objects. In addition, the characteristic parameters of five grades' typical goafs were built according to the interval limits value of single index evaluation. Then, using the technique for order preference by similarity to ideal solution(TOPSIS), five-category classification of HDG was realized based on closeness degree, and the HDG was also identified.Results show that the five-category identification of mine goafs could be realized by RS-TOPSIS method, based on the structure-scale-effect. The classification results are consistent with those of numerical simulation based on stress and displacement,while the coincidence rate is up to 92.5%. Furthermore, the results are more conservative to safety evaluation than numerical simulation, thus demonstrating that the proposed method is more easier, reasonable and more definite for HDG identification.
基金The authors are very grateful for the support received from the National Natural Science Foundation of China(No.11872121).
文摘The explosive reaction degree and protection from explosions are concerns in the military field.In this work,the reaction degree of the composition B explosive was investigated experimentally.Multi-layered compound structures were used as barriers to weaken the blast loads.A comprehensive experiment using a high-speed camera and image processing techniques,side witness plates,and bottom witness plates was presented.Using the experimental fragment velocities,fragment piercing patterns,and damage characteristics,the reaction degree of the explosive impeded by different multi-layered compound structures could be precisely differentiated.Reaction parameters of the explosive obstructed by compound structures were obtained by theoretical analysis and numerical simulations.Unlike the common method in which the explosive reaction degree is only distinguished based on the initial pressure amplitude transmitted into the explosive,a following shock wave reflected from the side steel casing was also considered.Different detonation growth paths in the explosive formed.Therefore,all these shock wave propagation characteristics must be considered to analyze the explosive response impeded by compound structures.
基金Projects(2020 JJ 5142,2019 RS 2067)supported by the Science and Technology Planning Project of Hunan Province,ChinaProject(19 C 0581)supported by the Research Foundation of Education Bureau of Hunan Province,China。
文摘Serving as gas diffusion layers(GDLs),the thermal conductivity of carbon paper(CP)plays a significant role in the heat transfer management in fuel cells.In the present study,the effect of graphitization degree of CP on its through plane thermal conductivity and in-plane thermal conductivity is investigated.The relationship between heat treatment temperatures(1800,2000,2200,2400 and 2500℃)and graphitization degree is also investigated by SEM,XRD and Raman measurements.A model for CP under different graphitization degree is suggested considering the thermal conductivity difference of carbon fiber and matrix carbon.The experimental and simulation results are compared.The results show that the graphitization degree has a significant impact on the through-plane thermal conductivity and in plane thermal conductivity.
基金Foundation item： Project（2012CB719803） supported by the National Basic Research Program of China Project（201011159098） supported by the Seed Funding for Basic Research Scheme from The University of Hong Kong, China
文摘Laboratory tests were performed on Toyoura sand specimens to investigate the relationship between degree of saturation Sr, B-value and P-wave velocity Vp. Different types of pore water （de-aired water or tap water） and pore gas （air or CO2） as well as different magnitudes of back pressure were used to achieve different Sr （or B-value）. The measured relationship between B-value and Vp was not consistent with the theoretical prediction. The measurement shows that the Vp value in the specimen flushed with de-aired water is independent of B-value （or St） and is always around the one in fully saturated condition. However, the Vp value in the specimen flushed with tap water increases with B-value, but the shape of the relationship between Vp and B-value is quite different from the theoretical prediction. The possible explanation for the discrepancy between laboratory measurement and theoretical prediction lies in that the air exists in the water as air bubbles and therefore the pore fluid （air-water mixture） is heterogeneous instead of homogenous assumed in the theoretical prediction.
基金Project (2005CB623703) supported by the Major State Basic Research and Development Program of China
文摘5Cu/(10NiO-NiFe2O4) cermet inert anodes were prepared by cold-pressing and sintering process, and the effect of superheat degree of melting K3AlF6-Na3AlF6-AlF3 on their anticorrosion performance was studied under electrolysis conditions. The results show that, the fluctuation of cell becomes small with increasing of superheat degree, which is helpful to inhibit the formation of cathodic encrustation; the concentration of impurities from inert anode in bath goes up to certain degree, but it is far smaller than those in traditional high-temperature bath. Increasing the superheat degree of melting K3AlF6-Na3AlF6-AlF3 has unconspicuous effect on the contents of impurities in cathodic aluminum. The total mass fractions of Fe, Ni and Cu in aluminum are 15.38% and 15.09% respectively under superheat degree of 95 and 195 ℃. From micro-topography of anode used view, increasing the superheat degree can aggravate corrosion of metal Cu in inert anode, and has negative influence on electrical conductivity of electrode to some extent.
基金supported by the National Natural Science Foundation of China(1140145071171150+4 种基金71471143)the Hubei Provincial Department of Education(B2015348D20141101)the Hubei Province Key Laboratory of Systems Science in Metallurgical Process(Y201518Z201401)
文摘Partial cooperation formulation is a more viable option than optimistic＇s and pessimistic＇s to solve an ill-posed bilevel programming problem.Aboussoror＇s partial cooperation model uses a constant as a cooperation index to describe the degree of follower＇s cooperation.The constant only indicates the leader＇s expectation coefficient for the follower＇s action,not the follower＇s own willingness.To solve this situation,a new model is proposed by using the follower＇s satisfactory degree as the cooperation degree.Then,because this new cooperation degree is a function which is dependent on the leader＇s choice and decided by the follower＇s satisfactory degree,this paper proves such proposed model not only leads an optimal value between the optimistic value and pessimistic＇s,but also leads a more satisfactory solution than Aboussoror＇s.Finally,a numerical experiment is given to demonstrate the feasibility of this new model.
基金Project(51221462)supported by the National Natural Science Foundation of China for Innovative Research GroupProject(20120095110001)supported by the Doctoral Fund of Ministry of Education of China+1 种基金Project supported by the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions,ChinaProject(CXJJ201303)supported by the Innovation Foundation of Xuyi Research and Development Center of Mining Equipment and Materials,China University of Mining and Technology,China
文摘A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange's equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by62.93% on average, which demonstrates the feasibility of NTESSMDF.
基金the Fujian Provincial Natural Science Foundation of China (Z0510492006J0391)
文摘Based on rough similarity degree of rough sets and close degree of fuzzy sets, the definitions of rough similarity degree and rough close degree of rough fuzzy sets are given, which can be used to measure the similar degree between two rough fuzzy sets. The properties and theorems are listed. Using the two new measures, the method of clustering in the rough fuzzy system can be obtained. After clustering, the new fuzzy sample can be recognized by the principle of maximal similarity degree.
基金supported by the National Natural Science Foundation of China (70571032)
文摘An improvement of tolerance relation is proposed in regard to rough set model based on connection degree by which reflexivity of relation can be assured without loss of information. Then, a method to determine optimal identity degree based on relative positive region is proposed so that the identity degree can be computed in an objective method without any preliminary or additional information about data, which is consistent with the notion of objectivity in rough set theory and data mining theory. Subsequently, an algorithm is proposed, and in two examples, the global optimum identity degree is found out. Finally, in regard to optimum connection degree, the method of rules extraction for connection degree rough set model based on generalization function is presented by which the rules extracted from a decision table are enumerated.
基金the Fujian Provincial Natural Science Foundation of China (Z051049, 2006J0391).
文摘The definition of rough similarity degree is given based on the axiomatic similarity degree, and the properties of rough similarity degree are listed. Using the properties of rough similarity degree, the method of clustering in rough systems can be obtained. After clustering, a new sample can be recognized by the principle of maximal rough similarity degree.
基金supported by Research Fund Chosun Univerity,2011
文摘LT codes are practical realization of digital fountain codes, which provides the concept of rateless coding. In this scheme, encoded symbols are generated infinitely from k information symbols. Decoder uses only(1+α)k number of encoded symbols to recover the original information. The degree distribution function in the LT codes helps to generate a random graph also referred as tanner graph. The artifact of tanner graph is responsible for computational complexity and overhead in the LT codes. Intuitively, a well designed degree distribution can be used for an efficient implementation of LT codes. The degree distribution function is studied as a function of power law, and LT codes are classified into two different categories: SFLT and RLT codes. Also, two different degree distributions are proposed and analyzed for SFLT codes which guarantee optimal performance in terms of computational complexity and overhead.
基金Financed by the Heilongjiang province natural science fund
文摘The even degree of chicken population could be estimated by the coefficient of variation or the percentage of the chicken whose body weights were not higher and lower than average body weight by 15% in the sampling population.In fact,the two indexes were relative to each other.On the basis of analyzing the relationship between the two expectations,the expectations which had been worked out independently were corrected in this paper.
