Acidic poly(ionic liquid)s(PILs)with swelling ability were synthesized by free radical copolymerization of N-vinylimidazolium ionic liquids,divinylbenzene(DVB)and sodium acrylate(NaAA),and further acidification by sul...Acidic poly(ionic liquid)s(PILs)with swelling ability were synthesized by free radical copolymerization of N-vinylimidazolium ionic liquids,divinylbenzene(DVB)and sodium acrylate(NaAA),and further acidification by sulfuric acid.The swelling ability of acidic PILs was greatly affected by cross-linker content and chain length of 3-alkyl-substituents on imidazolium.Cross-linked network structures could be observed from the cryogenic scanning electron microscopy(cryo-SEM)images of the swollen acidic PILs in formic acid.Acidic PILs with network structures in swollen state exhibited excellent activities in the esterification of cyclohexene and formic acid,and the catalytic activities were in positive correlation with their swelling abilities.Acidic PIL with 3-octyl-substituent and 2.5 mol%DVB(PIL-C8-2.5DVB-HSO4)had the highest swelling ability in formic acid and exhibited comparable catalytic activities with homogeneous catalysts such as sulfuric acid and p-toluenesulfonic acid.展开更多
The Br?nsted-acidic polyether ionic liquids(ILs)with different polymerization degrees(n value)were prepared via the reaction of tetramethylguanidine and epoxy ethane,followed by successive reactions with 1,3-propane s...The Br?nsted-acidic polyether ionic liquids(ILs)with different polymerization degrees(n value)were prepared via the reaction of tetramethylguanidine and epoxy ethane,followed by successive reactions with 1,3-propane sultone and trifluoromethanesulfonic acid(TfOH).The prepared ILs were characterized by infrared spectroscopy and 1H nuclear magnetic resonance spectroscopy,and their thermal stability was determined by thermal gravimetry.The synthesized polyether ILs coupled with TfOH were used to catalyze the alkylation reaction of isobutane and isobutene for the preparation of alkylate gasoline.The polyether ILs could improve the substrate dissolution and promote the separation of the catalyst from the products.The ideal IL(n=94)was determined.The optimized alkylation reaction conditions covered:a VTfOH/VIL ratio of 0.35,a reaction temperature of 40℃,a reaction time of 50 min,and a stirring speed of 800 r/min.The conversion of isobutene was 92.4%and the selectivity for the C8-product was 81.6%.Under optimal conditions,the catalyst life was determined and TfOH showed improved cyclic performance in the polyether ILs.After 8 operating cycles,the catalytic activity of the catalyst showed negligible decline.展开更多
A polyetheramine(PEA)-based Br?nsted-acidic ionic liquid(IL)was firstly prepared and used to promote the alkylation of isobutane with isobutene catalyzed by trifluoromethanesulfonic acid(TfOH).PEA-IL not only can reso...A polyetheramine(PEA)-based Br?nsted-acidic ionic liquid(IL)was firstly prepared and used to promote the alkylation of isobutane with isobutene catalyzed by trifluoromethanesulfonic acid(TfOH).PEA-IL not only can resolve the persistent problem of poor solubility of the volatile and refractory reactants,but also can satisfactorily exhibit the separation of the catalyst from product oil for reuse.The PEA-IL/TfOH catalytic system with an adjustable acidity ensures a high alkylate selectivity.Under the conditions covering a VIL/VTfOH ratio of 10:3,a temperature of 25°C,and a reaction time of 25 min,the C8-product selectivity reaches 86.63%.The PEA-IL/TfOH catalyst can be reused 13 times without a decrease in the catalytic performance.After many operating cycles,the hydrophobic PEA-IL can be easily regenerated by simply adding water.This study provides a green,economic,and highly efficient method for producing high-octane alkylate gasoline.展开更多
This work proposed to use the ionic liquid [EMIM][BF_4] as absorbent for the absorption of gaseous acetic acid. The feasibility of this technology was investigated from molecular level to industrial scale. The acetic ...This work proposed to use the ionic liquid [EMIM][BF_4] as absorbent for the absorption of gaseous acetic acid. The feasibility of this technology was investigated from molecular level to industrial scale. The acetic acid absorption experiment was carried out using [EMIM][BF_4],and the removal ratio of acetic acid in the gas product can achieve 88.6% at 20C under atmospheric pressure at the laboratory scale. Based on the experimental results, a reliable strict equilibrium phase model embedding the parameters of the UNIFAC model was established. On this basis, the conceptual process design and optimization of acetic acid removal by [EMIM][BF_4] at an industrial scale was done, and the most suitable design and operation parameters were obtained. For a further step, the binding energy between [EMIM][BF_4] and acetic acid was calculated to give some insights into the separation mechanism, and the results indicate that the interaction between acetic acid and IL is much stronger than that between nitrogen and IL. Moreover, hydrogen bond can be formed between the cation-acetic acid as well as the anion-acetic acid.展开更多
The eutectic ionic liquid （EIL） tetraethyl ammonium bromide-malonic acid （TEAB-Mal） was synthesized, with its structure characterized by the FT-IR spectroscopy and the 1H NMR spectrometry. The performance for remo...The eutectic ionic liquid （EIL） tetraethyl ammonium bromide-malonic acid （TEAB-Mal） was synthesized, with its structure characterized by the FT-IR spectroscopy and the 1H NMR spectrometry. The performance for removal of basic nitrogen compounds by EIL was studied using coker diesel as the feedstock. Experimental results showed that the EIL （TEAB-Mal） exhibited a good denitrogenation performance, leading to a 93.6% of basic N-removal efficiency under reaction conditions covering： a temperature of 30 ℃, an EIL to oil mass ratio of 1：1, an extraction time of 30 min, and a settling time of 120 min, while the basic nitrogen content in diesel dropped from 580 μg/g to 37 gg/g. In addition, the efficiency for extraction of basic N-compounds could still reach 62.9% at am EIL/oil mass ratio of 1：7 after four recycles of the EIL.展开更多
Carbon dioxide(CO_(2))is the predominant greenhouse gas in the Earth’s atmosphere and plays a crucial role in global warming.Given the inherent limitations of monoethanolamine absorbents in current commercial large-s...Carbon dioxide(CO_(2))is the predominant greenhouse gas in the Earth’s atmosphere and plays a crucial role in global warming.Given the inherent limitations of monoethanolamine absorbents in current commercial large-scale CO_(2)capture applications,amino acid ionic liquids(AAILs)have garnered extensive interest in this field due to their adjustable structure,low volatility,high thermal stability,and significant absorption capacity.However,the number of comprehensive reviews recently published on the CO_(2)absorption by AAILs remains limited.In addition,researchers have differing opinions on the AAILs/CO_(2)reaction mechanisms.Therefore,this review provides a thorough overview of the reaction mechanisms and structure-activity relationships associated with AAILs for CO_(2)capture.Moreover,it outlines the research advancements in pure AAILs and their mixtures,including aqueous AAILs and AAIL-organic solvent mixtures.The effects of varying ionic structures and additives on the absorption properties of AAILs are examined in detail.In conclusion,although AAILs exhibit high CO_(2)absorption loading and possess numerous appealing characteristics,further research is essential to comprehensively evaluate their viability for large-scale CO_(2)capture from flue gas.展开更多
High-energy-density(HED)fuel(e.g.widely used JP-10 and RJ-4),featuring compact 3D polycyclic structure with high strain,is of critical importance for volume-limited military aircraft,since their high density and combu...High-energy-density(HED)fuel(e.g.widely used JP-10 and RJ-4),featuring compact 3D polycyclic structure with high strain,is of critical importance for volume-limited military aircraft,since their high density and combustion heat can provide more propulsion energy.To reduce the reliance on petroleum source,it is highly desirable to develop renewable alternatives for the production of strained polycyclic HED fuel,but which remains a big challenge because of the inaccessibility caused by the high strain,We herein demonstrate a three-step catalytic route towards highly strained C_(17)and C_(18)spirofuel with biomass feedstocks.The process includes catalytic aldol condensation of renewable cyclohexanone/cyclopentanone with benzaldehyde,catalytic spiro Diels-Alder(D-A)reaction of aldol adduct with isoprene,and catalytic hydrodeoxygenation.The key spiro D-A reaction is enabled by the catalysis of heterogeneous Lewis acidic ionic liquid.The chloroaluminate IL,formed by benign urea and AICl3,exhibits good catalytic performance and reusability for this step.An eventual hydrodeoxygenation(HDO)over Pd/C and H-Y produces strained tricyclic spirofuel with density>0.93 g/mL,combustion heat>41 MJ/L and freezing point<-40℃,which are better than the properties of tactical fuel RJ-4.Therefore,it is anticipated that the as-prepared renewable fuels have the potential to replace traditional petroleum-derived HED fuels.展开更多
The removal of acid compounds （naphthenates） from acidic oil with ionic liquids was systematically investigated. [BMIM]Br-AlCl3 was used to investigate the effect on deacidification of oil. Experimental results show...The removal of acid compounds （naphthenates） from acidic oil with ionic liquids was systematically investigated. [BMIM]Br-AlCl3 was used to investigate the effect on deacidification of oil. Experimental results showed that at a temperature of 323K with a molar ratio of AlCl3 to [BM1M]Br-AlCl3 of 0.2, and a mass ratio of IL to white oil of 4%, the deacidification rate could reach 75.9%. And a reaction time of 4 h was sufficient to achieve the goal. The study on reproducibility of catalytic performance of [BMIM]Br-AlCl3 showed the possibility of using the ionic liquid in the continuous catalytic reaction.展开更多
基金This work was supported by the National Natural Science Foundation of China(21773068,21811530273,21573072)the National Key Research and Development Program of China(2017YFA0403102)Shanghai Leading Academic Discipline Project(B409).
文摘Acidic poly(ionic liquid)s(PILs)with swelling ability were synthesized by free radical copolymerization of N-vinylimidazolium ionic liquids,divinylbenzene(DVB)and sodium acrylate(NaAA),and further acidification by sulfuric acid.The swelling ability of acidic PILs was greatly affected by cross-linker content and chain length of 3-alkyl-substituents on imidazolium.Cross-linked network structures could be observed from the cryogenic scanning electron microscopy(cryo-SEM)images of the swollen acidic PILs in formic acid.Acidic PILs with network structures in swollen state exhibited excellent activities in the esterification of cyclohexene and formic acid,and the catalytic activities were in positive correlation with their swelling abilities.Acidic PIL with 3-octyl-substituent and 2.5 mol%DVB(PIL-C8-2.5DVB-HSO4)had the highest swelling ability in formic acid and exhibited comparable catalytic activities with homogeneous catalysts such as sulfuric acid and p-toluenesulfonic acid.
基金supported by the National Natural Science Foundation of China (21476120)the Shandong Province Prioritized Development Plan (2017GGX40107)the Taishan Scholar Project of Shandong Province in China (ts201511033)
文摘The Br?nsted-acidic polyether ionic liquids(ILs)with different polymerization degrees(n value)were prepared via the reaction of tetramethylguanidine and epoxy ethane,followed by successive reactions with 1,3-propane sultone and trifluoromethanesulfonic acid(TfOH).The prepared ILs were characterized by infrared spectroscopy and 1H nuclear magnetic resonance spectroscopy,and their thermal stability was determined by thermal gravimetry.The synthesized polyether ILs coupled with TfOH were used to catalyze the alkylation reaction of isobutane and isobutene for the preparation of alkylate gasoline.The polyether ILs could improve the substrate dissolution and promote the separation of the catalyst from the products.The ideal IL(n=94)was determined.The optimized alkylation reaction conditions covered:a VTfOH/VIL ratio of 0.35,a reaction temperature of 40℃,a reaction time of 50 min,and a stirring speed of 800 r/min.The conversion of isobutene was 92.4%and the selectivity for the C8-product was 81.6%.Under optimal conditions,the catalyst life was determined and TfOH showed improved cyclic performance in the polyether ILs.After 8 operating cycles,the catalytic activity of the catalyst showed negligible decline.
基金financially supported by the National Natural Science Foundation of China(Nos.21476120,21805158)the Shandong Province Priority Development Plan of China(Nos.2017GGX40107,2019GGX102021)。
文摘A polyetheramine(PEA)-based Br?nsted-acidic ionic liquid(IL)was firstly prepared and used to promote the alkylation of isobutane with isobutene catalyzed by trifluoromethanesulfonic acid(TfOH).PEA-IL not only can resolve the persistent problem of poor solubility of the volatile and refractory reactants,but also can satisfactorily exhibit the separation of the catalyst from product oil for reuse.The PEA-IL/TfOH catalytic system with an adjustable acidity ensures a high alkylate selectivity.Under the conditions covering a VIL/VTfOH ratio of 10:3,a temperature of 25°C,and a reaction time of 25 min,the C8-product selectivity reaches 86.63%.The PEA-IL/TfOH catalyst can be reused 13 times without a decrease in the catalytic performance.After many operating cycles,the hydrophobic PEA-IL can be easily regenerated by simply adding water.This study provides a green,economic,and highly efficient method for producing high-octane alkylate gasoline.
基金financially supported by the National Natural Science Foundation of China(No.U1862103)
文摘This work proposed to use the ionic liquid [EMIM][BF_4] as absorbent for the absorption of gaseous acetic acid. The feasibility of this technology was investigated from molecular level to industrial scale. The acetic acid absorption experiment was carried out using [EMIM][BF_4],and the removal ratio of acetic acid in the gas product can achieve 88.6% at 20C under atmospheric pressure at the laboratory scale. Based on the experimental results, a reliable strict equilibrium phase model embedding the parameters of the UNIFAC model was established. On this basis, the conceptual process design and optimization of acetic acid removal by [EMIM][BF_4] at an industrial scale was done, and the most suitable design and operation parameters were obtained. For a further step, the binding energy between [EMIM][BF_4] and acetic acid was calculated to give some insights into the separation mechanism, and the results indicate that the interaction between acetic acid and IL is much stronger than that between nitrogen and IL. Moreover, hydrogen bond can be formed between the cation-acetic acid as well as the anion-acetic acid.
基金the financial support from the Doctoral Funds of Liaoning Provincial Natural Science Foundation(201601323)
文摘The eutectic ionic liquid （EIL） tetraethyl ammonium bromide-malonic acid （TEAB-Mal） was synthesized, with its structure characterized by the FT-IR spectroscopy and the 1H NMR spectrometry. The performance for removal of basic nitrogen compounds by EIL was studied using coker diesel as the feedstock. Experimental results showed that the EIL （TEAB-Mal） exhibited a good denitrogenation performance, leading to a 93.6% of basic N-removal efficiency under reaction conditions covering： a temperature of 30 ℃, an EIL to oil mass ratio of 1：1, an extraction time of 30 min, and a settling time of 120 min, while the basic nitrogen content in diesel dropped from 580 μg/g to 37 gg/g. In addition, the efficiency for extraction of basic N-compounds could still reach 62.9% at am EIL/oil mass ratio of 1：7 after four recycles of the EIL.
基金supported by the Natural Science Foundation of Shanghai(Grant No.24ZR1426200)the support from the Key Program of the National Natural Science Foundation of China(Grant No.52236004)。
文摘Carbon dioxide(CO_(2))is the predominant greenhouse gas in the Earth’s atmosphere and plays a crucial role in global warming.Given the inherent limitations of monoethanolamine absorbents in current commercial large-scale CO_(2)capture applications,amino acid ionic liquids(AAILs)have garnered extensive interest in this field due to their adjustable structure,low volatility,high thermal stability,and significant absorption capacity.However,the number of comprehensive reviews recently published on the CO_(2)absorption by AAILs remains limited.In addition,researchers have differing opinions on the AAILs/CO_(2)reaction mechanisms.Therefore,this review provides a thorough overview of the reaction mechanisms and structure-activity relationships associated with AAILs for CO_(2)capture.Moreover,it outlines the research advancements in pure AAILs and their mixtures,including aqueous AAILs and AAIL-organic solvent mixtures.The effects of varying ionic structures and additives on the absorption properties of AAILs are examined in detail.In conclusion,although AAILs exhibit high CO_(2)absorption loading and possess numerous appealing characteristics,further research is essential to comprehensively evaluate their viability for large-scale CO_(2)capture from flue gas.
基金supported by the Fundamental Research Funds for the Central Universities(2023QN1009)Xuzhou Basic Research Project(KC23018)+1 种基金China University of Mining and Technology(CUMT)Open Sharing Fund for Large-scale Instruments and Equipment(DYGX-2024-34)Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘High-energy-density(HED)fuel(e.g.widely used JP-10 and RJ-4),featuring compact 3D polycyclic structure with high strain,is of critical importance for volume-limited military aircraft,since their high density and combustion heat can provide more propulsion energy.To reduce the reliance on petroleum source,it is highly desirable to develop renewable alternatives for the production of strained polycyclic HED fuel,but which remains a big challenge because of the inaccessibility caused by the high strain,We herein demonstrate a three-step catalytic route towards highly strained C_(17)and C_(18)spirofuel with biomass feedstocks.The process includes catalytic aldol condensation of renewable cyclohexanone/cyclopentanone with benzaldehyde,catalytic spiro Diels-Alder(D-A)reaction of aldol adduct with isoprene,and catalytic hydrodeoxygenation.The key spiro D-A reaction is enabled by the catalysis of heterogeneous Lewis acidic ionic liquid.The chloroaluminate IL,formed by benign urea and AICl3,exhibits good catalytic performance and reusability for this step.An eventual hydrodeoxygenation(HDO)over Pd/C and H-Y produces strained tricyclic spirofuel with density>0.93 g/mL,combustion heat>41 MJ/L and freezing point<-40℃,which are better than the properties of tactical fuel RJ-4.Therefore,it is anticipated that the as-prepared renewable fuels have the potential to replace traditional petroleum-derived HED fuels.
文摘The removal of acid compounds （naphthenates） from acidic oil with ionic liquids was systematically investigated. [BMIM]Br-AlCl3 was used to investigate the effect on deacidification of oil. Experimental results showed that at a temperature of 323K with a molar ratio of AlCl3 to [BM1M]Br-AlCl3 of 0.2, and a mass ratio of IL to white oil of 4%, the deacidification rate could reach 75.9%. And a reaction time of 4 h was sufficient to achieve the goal. The study on reproducibility of catalytic performance of [BMIM]Br-AlCl3 showed the possibility of using the ionic liquid in the continuous catalytic reaction.
