Exploring catalysts with high catalytic activity and low cost is crucial for promoting the electrocatalytic reduction of CO_(2).In this study,Ag nanoparticle catalysts were synthesized on GS carbon and vapor grown car...Exploring catalysts with high catalytic activity and low cost is crucial for promoting the electrocatalytic reduction of CO_(2).In this study,Ag nanoparticle catalysts were synthesized on GS carbon and vapor grown carbon fiber(VGCF)carbon carriers using different silver precursors(AgAc,AgNO_(3))through the ultrafast high temperature thermal shock method.The experimental results demonstrated that the performance of Ag catalysts for the electrocatalytic reduction of CO_(2) to CO could be significantly enhanced by modulating the nanostructure,carrier,and metal loading.The VGCF-AgNO_(3)-HT nanoparticles exhibited a relatively regular spherical morphology,with smaller particle sizes and uniform distribution.Furthermore,the intricate and overlapping arrangement of VGCF carbon nanofibers contributed to increasing the active area for electrochemical reactions,making it an excellent catalyst carrier.Catalysts with varying Ag loadings were prepared using the thermal shock method,and it was observed that the nanoparticles maintained their superior nanostructures even with increased Ag loading.The Ag-HT-65 catalyst exhibited outstanding catalytic performance,achieving a CO Faradaic efficiency of 93.03% at a potential of−0.8 V(vs.RHE).After 12 h of testing,the CO Faradaic efficiency remained 90%,exhibiting an excellent stability.展开更多
There is a lack of thermophysical data of heat transfer oil and nano-oil in the high temperature range of 50-300 ℃ for designing and developing heat transfer oil furnace and its heating systems. In the present study,...There is a lack of thermophysical data of heat transfer oil and nano-oil in the high temperature range of 50-300 ℃ for designing and developing heat transfer oil furnace and its heating systems. In the present study, the thermal conductivity values of heat transfer oil and TiO2 nano-oil in the above high temperature range were measured by a newly developed high-temperature thermal conductivity meter. Based on the principle of least square method, the thermal conductivity values obtained from experiments were fitted separately, and the correlation between thermal conductivity and temperature of heat transfer oil and TiO2 nano-oil was obtained. The results show that the thermal conductivity and the increased percentage of thermal conductivity of TiO2 nano-oil are proportional to the increase of particle size and mass fraction of nanoparticles, but thermal conductivity is in reverse proportion to the increase of temperature and the increased percentage of thermal conductivity is less affected by temperature.展开更多
Highly pure active γ-Al2O3 nanoparticles were synthesized from aluminum nitrate and ammonium carbonate with a little surfactant by chemical precipitation method. The factors affecting the synthesis process were studi...Highly pure active γ-Al2O3 nanoparticles were synthesized from aluminum nitrate and ammonium carbonate with a little surfactant by chemical precipitation method. The factors affecting the synthesis process were studied. The properties of γ-Al2O3 nanoparticles were characterized by DTA, XRD, BET, TEM, laser granularity analysis and impurity content analysis. The results show that the amorphous precursor AI（OH）3 sols are produced by using 0.1 mol/L Al（NO3）3·9H2O and 0.16 mol/L （NH4）2CO3·H2O reaction solutions, according to the volume ratio 1.33, adding 0.024%（volume fraction） surfactant PEG600, and reacting at 40℃, 1000 r/min stirring rate for 15min. Then, after stabilizing for 24 h, the precursors were extracted and filtrated by vacuum, washed thoroughly with deionized water and dehydrated ethanol, dried in vacuum at 80℃ for 8h, final calcined at 800℃ for 1h in the air, and high purity active γ-Al2O3 nanoparticles can be prepared with cubic in crystal system, OH^7-FD3M in space group, about 9 nm in crystal grain size, about 20 nm in particle size and uniform size distribution, 131.35 m^2/g in BET specific surface area, 7 - 11 nm in pore diameter, and not lower than 99.93% in purity.展开更多
OBJECTIVE To review the application of nanoparticles modified with angiopep-2,providing theoretical guidance for the diagnosis and treatment of glioma. METHODS According to domestic and foreign research reports of nan...OBJECTIVE To review the application of nanoparticles modified with angiopep-2,providing theoretical guidance for the diagnosis and treatment of glioma. METHODS According to domestic and foreign research reports of nanoparticles modified with angiopep-2 in recent years,the application in the diagnosis and treatment of glioma was summarized and analyzed. RESULTS Angiopep-2 can be modified to the surface of nanoparticles loaded with imaging agents or chemotherapeutic agents,which can significantly improve the imaging effect of glioma and achieve targeted drug delivery. CONCLUSION Angiopep-2 exhibits a high brain penetration capability in blood brain barrier and in glioma cells. The nanoparticles modified with angiopep-2 can delivery various imaging agents and chemotherapeutic agents to glioma cells,the dual-targeting delivery systems can provide theoretical guidance for the diagnosis and treatment of glioma.展开更多
基金Project(52304338)supported by the National Natural Science Foundation of China。
文摘Exploring catalysts with high catalytic activity and low cost is crucial for promoting the electrocatalytic reduction of CO_(2).In this study,Ag nanoparticle catalysts were synthesized on GS carbon and vapor grown carbon fiber(VGCF)carbon carriers using different silver precursors(AgAc,AgNO_(3))through the ultrafast high temperature thermal shock method.The experimental results demonstrated that the performance of Ag catalysts for the electrocatalytic reduction of CO_(2) to CO could be significantly enhanced by modulating the nanostructure,carrier,and metal loading.The VGCF-AgNO_(3)-HT nanoparticles exhibited a relatively regular spherical morphology,with smaller particle sizes and uniform distribution.Furthermore,the intricate and overlapping arrangement of VGCF carbon nanofibers contributed to increasing the active area for electrochemical reactions,making it an excellent catalyst carrier.Catalysts with varying Ag loadings were prepared using the thermal shock method,and it was observed that the nanoparticles maintained their superior nanostructures even with increased Ag loading.The Ag-HT-65 catalyst exhibited outstanding catalytic performance,achieving a CO Faradaic efficiency of 93.03% at a potential of−0.8 V(vs.RHE).After 12 h of testing,the CO Faradaic efficiency remained 90%,exhibiting an excellent stability.
基金Project(51346007) supported by the National Natural Science Foundation of China
文摘There is a lack of thermophysical data of heat transfer oil and nano-oil in the high temperature range of 50-300 ℃ for designing and developing heat transfer oil furnace and its heating systems. In the present study, the thermal conductivity values of heat transfer oil and TiO2 nano-oil in the above high temperature range were measured by a newly developed high-temperature thermal conductivity meter. Based on the principle of least square method, the thermal conductivity values obtained from experiments were fitted separately, and the correlation between thermal conductivity and temperature of heat transfer oil and TiO2 nano-oil was obtained. The results show that the thermal conductivity and the increased percentage of thermal conductivity of TiO2 nano-oil are proportional to the increase of particle size and mass fraction of nanoparticles, but thermal conductivity is in reverse proportion to the increase of temperature and the increased percentage of thermal conductivity is less affected by temperature.
文摘Highly pure active γ-Al2O3 nanoparticles were synthesized from aluminum nitrate and ammonium carbonate with a little surfactant by chemical precipitation method. The factors affecting the synthesis process were studied. The properties of γ-Al2O3 nanoparticles were characterized by DTA, XRD, BET, TEM, laser granularity analysis and impurity content analysis. The results show that the amorphous precursor AI（OH）3 sols are produced by using 0.1 mol/L Al（NO3）3·9H2O and 0.16 mol/L （NH4）2CO3·H2O reaction solutions, according to the volume ratio 1.33, adding 0.024%（volume fraction） surfactant PEG600, and reacting at 40℃, 1000 r/min stirring rate for 15min. Then, after stabilizing for 24 h, the precursors were extracted and filtrated by vacuum, washed thoroughly with deionized water and dehydrated ethanol, dried in vacuum at 80℃ for 8h, final calcined at 800℃ for 1h in the air, and high purity active γ-Al2O3 nanoparticles can be prepared with cubic in crystal system, OH^7-FD3M in space group, about 9 nm in crystal grain size, about 20 nm in particle size and uniform size distribution, 131.35 m^2/g in BET specific surface area, 7 - 11 nm in pore diameter, and not lower than 99.93% in purity.
文摘OBJECTIVE To review the application of nanoparticles modified with angiopep-2,providing theoretical guidance for the diagnosis and treatment of glioma. METHODS According to domestic and foreign research reports of nanoparticles modified with angiopep-2 in recent years,the application in the diagnosis and treatment of glioma was summarized and analyzed. RESULTS Angiopep-2 can be modified to the surface of nanoparticles loaded with imaging agents or chemotherapeutic agents,which can significantly improve the imaging effect of glioma and achieve targeted drug delivery. CONCLUSION Angiopep-2 exhibits a high brain penetration capability in blood brain barrier and in glioma cells. The nanoparticles modified with angiopep-2 can delivery various imaging agents and chemotherapeutic agents to glioma cells,the dual-targeting delivery systems can provide theoretical guidance for the diagnosis and treatment of glioma.
