While newer,more efficient Lithium-ion batteries(LIBs)and extinguishing agents have been developed to reduce the occurrence of thermal runaway accidents,there is still a scarcity of research focused on the application...While newer,more efficient Lithium-ion batteries(LIBs)and extinguishing agents have been developed to reduce the occurrence of thermal runaway accidents,there is still a scarcity of research focused on the application of surfactants in different LIBs extinguishing agents,particularly in terms of patented technologies.The aim of this review paper is to provide an overview of the technological progress of LIBs and LIBs extinguishing agents in terms of patents in Korea,Japan,Europe,the United States,China,etc.The initial part of this review paper is sort out LIBs technology development in different regions.In addition,to compare LIBs extinguishing agent progress and challenges of liquid,solid,combination of multiple,and microencapsulated.The subsequent section of this review focuses on an in-depth analysis dedicated to the efficiency and challenges faced by the surfactants corresponding design principles of LIBs extinguishing agents,such as nonionic and anionic surfactants.A total of 451,760 LIBs-related patent and 20 LIBs-fire-extinguishing agent-related patent were included in the analyses.The extinguishing effect,cooling performance,and anti-recombustion on different agents have been highlighted.After a comprehensive comparison of these agents,this review suggests that temperature-sensitive hydrogel extinguishing agent is ideal for the effective control of LIBs fire.The progress and challenges of surfactants have been extensively examined,focusing on key factors such as surface activity,thermal stability,foaming properties,environmental friendliness,and electrical conductivity.Moreover,it is crucial to emphasize that the selection of a suitable surfactant must align with the extinguishing strategy of the extinguishing agent for optimal firefighting effectiveness.展开更多
A series of spontaneous imbibition(SI)tests of tight oil were performed,together with oil distribution scans by computed tomography(CT)and nuclear magnetic resonance(NMR).Thus,the best surfactants to optimize the SI e...A series of spontaneous imbibition(SI)tests of tight oil were performed,together with oil distribution scans by computed tomography(CT)and nuclear magnetic resonance(NMR).Thus,the best surfactants to optimize the SI effect were obtained,the basic requirements to surfactants for efficient SI were determined,and the oil mobilization by SI revealed.The results show that anionic surfactants significantly outperform non-ionic,cationic,and zwitterionic ones in SI process.Excellent systems can be further obtained by mixing anionic surfactants with others(e.g.1:1 mixtures of AES:EHSB).The requirements to interfacial properties of surfactants for achieving efficient SI at permeabilities of 0.05,0.5,and 5.0 mD are as follows:10~0 mN/m,<40°;10-1-10~0 mN/m,<55°;and 10-1-10~0 mN/m,<70°,respectively.Although a high oil recovery of 38.5%by SI was achieved in small cylindrical cores(φ2.5 cm×3.0 cm),the joint SI and CT tests in larger,cube-shaped cores(5.0 cm×5.0 cm×5.0 cm)showed that the SI process could only remove the oil from the outermost few millimeters of the cores with permeabilities of 0.05 and 0.1 mD,indicating the great difficulty encountered for their development.The NMR showed that the SI treatment preferentially removed oil from smaller pores rather than medium or large pores.展开更多
The conservation of rheological and filtration properties of drilling fluids is essential during drilling operations.However,high-pressure and high-temperature conditions may affect drilling fluid additives,leading to...The conservation of rheological and filtration properties of drilling fluids is essential during drilling operations.However,high-pressure and high-temperature conditions may affect drilling fluid additives,leading to their degradation and reduced performance during operation.Hence,the main objective of this study is to formulate and evaluate a viscoelastic surfactant(VES)to design water-based drilling nanofluids(DNF).Silica nanomaterials are also incorporated into fluids to improve their main functional characteristics under harsh conditions.The investigation included:i)synthesis and characterization of VES through zeta potential,thermogravimetric analysis(TGA),Fourier transform infrared spectroscopy(FTIR),atomic force microscopy(AFM),and rheological behavior;ii)the effect of the presence of VES combined with silica nanoparticles on the rheological,filtration,thermal,and structural properties by steady and dynamic shear rheological,filter press,thermal aging assays,and SEM(SEM)assays,respectively;and iii)evaluation of filtration properties at the pore scale through a microfluidic approach.The rheological results showed that water-based muds(WBMs)in the presence of VES exhibited shearthinning and viscoelastic behavior slightly higher than that of WBMs with xanthan gum(XGD).Furthermore,the filtration and thermal properties of the drilling fluid improved in the presence of VES and silica nanoparticles at 0.1 wt%.Compared to the WBMs based on XGD,the 30-min filtrate volume for DNF was reduced by 75%.Moreover,the Herschel-Bulkley model was employed to represent the rheological behavior of fluids with an R2of approximately 0.99.According to SEM,laminar and spherical microstructures were observed for the WBMs based on VES and XGD,respectively.A uniform distribution of the nanoparticles was observed in the WBMs.The results obtained from microfluidic experiments indicated low dynamic filtration for fluids containing VES and silica nanoparticles.Specifically,the filtrate volume of fluids containing VES and VES with silica nanoparticles at 281 min was 0.35 and 0.04 m L,respectively.The differences in the rheological,filtration,thermal,and structural results were mainly associated with the morphological structure of VES or XGD and surface interactions with other WBMs additives.展开更多
The influences of an anionic-nonionic composite surfactant and petroleum sulfonate, used in surfactant-polymer flooding in Shengli Gudong oilfield, East China, on the interfacial properties of Gudong crude model oil a...The influences of an anionic-nonionic composite surfactant and petroleum sulfonate, used in surfactant-polymer flooding in Shengli Gudong oilfield, East China, on the interfacial properties of Gudong crude model oil and synthetic formation water was studied by measuring interfacial tension, interfacial viscoelasticity and Zeta potential. The in？ uence of the surfactants on the stability of Gudong water-in-oil （W/O） and oil-in-water （O/W） emulsions was evaluated by separating water from the W/O emulsion and residual oil in the aqueous phase of the O/W emulsion respectively. The results showed that the two kinds of surfactants, namely anionic-nonionic composite surfactant and petroleum sulfonate, are both able to decrease the interfacial tension between the oil phase and the aqueous phase and increase the surface potential of the oil droplets dispersed in the O/W emulsion, which can enhance the stability of the W/O and O/W crude oil emulsions. Compared with petroleum sulfonate, the anionic-nonionic composite surfactant is more interfacially active and able to enhance the strength of the interfacial film between oil and water, hence enhance the stability of the W/O and O/W emulsions more effectively.展开更多
Hydraulic fracturing technology can significantly increase oil production from tight oil formations, but performance data show that production declines rapidly. In the long term, it is necessary to increase the develo...Hydraulic fracturing technology can significantly increase oil production from tight oil formations, but performance data show that production declines rapidly. In the long term, it is necessary to increase the development efficiency of block matrix, surfactant-aided imbibition is a potential way. The current work aimed to explain comprehensively how surfactants can enhance the imbibition rate. Laboratory experiments were performed to investigate the effects of wettability, interfacial tension(IFT), and relative permeability as the key parameters underlying surfactant solution imbibition. Two different types of surfactants, sodium dodecyl sulfate and polyethylene glycol octylphenol ether, at varied concentrations were tested on reservoir rocks. Experimental results showed that the oil recovery rate increased with increased wettability alteration and IFT and decreased residual oil saturation. A mechanistic simulator developed in previous studies was used to perform parametric analysis after successful laboratory-scale validation. Results were proven by parametric studies. This study,which examined the mechanism and factors influencing surfactant solution imbibition, can improve understanding of surfactant-aided imbibition and surfactant screening.展开更多
Surfactant flooding is an important technique used to improve oil recovery from mature oil reservoirs due to minimizing the interfacial tension(IFT)between oil and water and/or altering the rock wettability toward wat...Surfactant flooding is an important technique used to improve oil recovery from mature oil reservoirs due to minimizing the interfacial tension(IFT)between oil and water and/or altering the rock wettability toward water-wet using various surfactant agents including cationic,anionic,non-ionic,and amphoteric varieties.In this study,two amino-acid based surfactants,named lauroyl arginine(L-Arg)and lauroyl cysteine(L-Cys),were synthesized and used to reduce the IFT of oil–water systems and alter the wettability of carbonate rocks,thus improving oil recovery from oil-wet carbonate reservoirs.The synthesized surfactants were characterized using Fourier transform infrared spectroscopy and nuclear magnetic resonance analyses,and the critical micelle concentration(CMC)of surfactant solutions was determined using conductivity,pH,and turbidity techniques.Experimental results showed that the CMCs of L-Arg and L-Cys solutions were 2000 and 4500 ppm,respectively.It was found that using L-Arg and L-Cys solutions at their CMCs,the IFT and contact angle were reduced from 34.5 to 18.0 and15.4 mN/m,and from 144°to 78°and 75°,respectively.Thus,the L-Arg and L-Cys solutions enabled approximately 11.9%and 8.9%additional recovery of OOIP(original oil in place).It was identified that both amino-acid surfactants can be used to improve oil recovery due to their desirable effects on the EOR mechanisms at their CMC ranges.展开更多
Surfactants for enhanced oil recovery are important to study due to their special characteristics like foam generation,lowering interfacial tension between oleic and aqueous phases,and wettability alteration of reserv...Surfactants for enhanced oil recovery are important to study due to their special characteristics like foam generation,lowering interfacial tension between oleic and aqueous phases,and wettability alteration of reservoir rock surfaces.Foam is a good mobility control agent in enhanced oil recovery for improving the mobility ratio.In the present work,the foaming behavior of three nonionic ethoxylated surfactants,namely Tergitol 15-S-7,Tergitol 15-S-9,and Tergitol 15-S-12,was studied experimentally.Among the surfactants,Tergitol 15-S-12 shows the highest foamability.The effect of Na Cl concentration and synthetic seawater on foaming behavior of the surfactants was investigated by the test-tube shaking method.The critical micelle concentrations of aqueous solutions of the different nonionic surfactants were measured at 300 K.It was found that the critical micelle concentrations of all surfactants also increased with increasing ethylene oxide number.Dynamic light scattering experiments were performed to investigate the micelle sizes of the surfactants at their respective critical micelle concentrations.Core flooding experiments were carried out in sand packs using the surfactant solutions.It was found tha t22% additional oil was recovered in the case of all the surfactants over secondary water flooding.Tergitol 15-S-12exhibited the maximum additional oil recovery which is more than 26%after water injection.展开更多
The present study investigated the wax deposition tendencies of a light Malaysian crude oil（42.4° API）, and the wax inhibiting potential of some surfactants and their blends with nanoparticles. With the knowled...The present study investigated the wax deposition tendencies of a light Malaysian crude oil（42.4° API）, and the wax inhibiting potential of some surfactants and their blends with nanoparticles. With the knowledge that the majority of the wax inhibition research revolved around polymeric wax inhibitors, which cause environmental issues, we highlighted the potential of surfactants and their blend with SiO2 nanoparticles as wax deposition inhibitors. Different surfactants including oil-based, silane-based, Gemini and bio-surfactants were considered as primary surfactants. The primary surfactants and their respective blends at a concentration of 400 ppm were screened as wax inhibitor candidates using cold finger apparatus. The screening results showed a significant influence on the paraffin inhibition efficiency on wax deposition by using 400 ppm of silane-based surfactant, which decreased the wax deposition up to 53.9% as compared to that of the untreated crude oil. The inhibition efficiency among the silane-based surfactant（highest） and bio-surfactant（lowest）revealed an appreciable difference up to 36.5%. Furthermore, the wax from the treated sample was found to deposit in a thin gel-like form, which adhered inadequately to the surface of the cold finger. A further investigation by blending the 400 ppm silane-based surfactant with a 400 ppm SiO2 nanoparticle suspension in a load ratio of 3：1 found that the wax inhibition decreased up to 81% as compared to the scenario when they were not added. However, we have shown that the synergy between the silane-based surfactant and the nanoparticles is influenced by the concentration and load ratio of surfactant and nanoparticles, residence time, differential temperature and rotation rate.展开更多
The ability of a novel nonionic CO2 -soluble surfactant to propagate foam in porous media was compared with that of a conventional anionic surfactant（aqueous soluble only）through core floods with Berea sandstone cor...The ability of a novel nonionic CO2 -soluble surfactant to propagate foam in porous media was compared with that of a conventional anionic surfactant（aqueous soluble only）through core floods with Berea sandstone cores.Both simultaneous and alternating injections have been tested.The novel foam outperforms the conventional one with respect to faster foam propagation and higher desaturation rate.Furthermore,the novel injection strategy,CO2 continuous injection with dissolved CO2 -soluble surfactant,has been tested in the laboratory.Strong foam presented without delay.It is the first time the measured surfactant properties have been used to model foam transport on a field scale to extend our findings with the presence of gravity segregation.Different injection strategies have been tested under both constant rate and pressure constraints.It was showed that novel foam outperforms the conventional one in every scenario with much higher sweep efficiency and injectivity as well as more even pressure redistribution.Also,for this novel foam,it is not necessary that constant pressure injection is better,which has been concluded in previous literature for conventional foam.Furthermore,the novel injection strategy,CO2 continuous injection with dissolved CO2 -soluble surfactant,gave the best performance,which could lower the injection and water treatment cost.展开更多
The basis of this study is to identify the versatility of N,N,N＇-trimethyl-N＇-tallow-1,3-diaminopropane（DTTM） surfactant in high saline environments. The surfactant was examined with sodium chloride, NaCl, to unde...The basis of this study is to identify the versatility of N,N,N＇-trimethyl-N＇-tallow-1,3-diaminopropane（DTTM） surfactant in high saline environments. The surfactant was examined with sodium chloride, NaCl, to understand how triggers such as salt, p H, temperature, and surfactant concentration influences the viscoelastic response of the surfactant solution. The DTTM surfactant and salt（NaCl） concentrations used in steady-state shear viscosity analysis range from 0.2 wt% to 2 wt%and 5 wt% to 25 wt%, respectively. Along with DTTM results, three similar chemical structures are investigated to understand how viscosity changes with alterations in tail and head group composition. It was found that DTTM surfactant has the capability of transitioning from a foam-bearing to viscoelastic state at low surfactant concentrations under moderate to high saline conditions. A longer tail length promotes viscoelasticity and shear-thinning behavior. Terminals consisting of hydroxides or ethoxylates have a lower viscosity than that of methyl terminals. A head group consisting of two nitrogen atoms has a higher viscosity than those containing one nitrogen atom. The rheological characterization of DTTM presented in this paper is part of a larger study in determining the capability of this surfactant to foam CO2 for improving mobility control in CO2 enhanced oil recovery in high saline oil formations.展开更多
Naturally fractured carbonate reservoirs have very low oil recovery efficiency owing to their wettability and tightness of matrix.However,smart water can enhance oil recovery by changing the wettability of the carbona...Naturally fractured carbonate reservoirs have very low oil recovery efficiency owing to their wettability and tightness of matrix.However,smart water can enhance oil recovery by changing the wettability of the carbonate rock surface from oilwet to water-wet,and the addition of surfactants can also change surface wettability.In the present study,the effects of a solution of modified seawater with some surfactants,namely C12 TAB,SDS,and TritonX-100(TX-100),on the wettability of carbonate rock were investigated through contact angle measurements.Oil recovery was studied using spontaneous imbibition tests at 25,70,and 90°C,followed by thermal gravity analysis to measure the amount of adsorbed material on the carbonate surface.The results indicated that Ca2+,Mg2+,and SO42-.ions may alter the carbonate rock wettability from oil-wet to water-wet,with further water wettability obtained at higher concentrations of the ions in modified seawater.Removal of NaCl from the imbibing fluid resulted in a reduced contact angle and significantly enhanced oil recovery.Low oil recoveries were obtained with modified seawater at 25 and 70°C,but once the temperature was increased to 90°C,the oil recovery in the spontaneous imbibition experiment increased dramatically.Application of smart water with C12 TAB surfactant at 0.1 wt%changed the contact angle from 161°to 52°and enhanced oil recovery to 72%,while the presence of the anionic surfactant SDS at 0.1 wt%in the smart water increased oil recovery to 64.5%.The TGA analysis results indicated that the adsorbed materials on the carbonate surface were minimal for the solution containing seawater with C12 TAB at 0.1 wt%(SW+CTAB(0.1 wt%)).Based on the experimental results,a mechanism was proposed for wettability alteration of carbonate rocks using smart water with SDS and C12 TAB surfactants.展开更多
Oil-soluble bimetallic CoMoS nanoparticles were successfully synthesized by a composite-surfactants-aided-solvothermal process.The surface hydrophilicity and functionality of the products were investigated through tra...Oil-soluble bimetallic CoMoS nanoparticles were successfully synthesized by a composite-surfactants-aided-solvothermal process.The surface hydrophilicity and functionality of the products were investigated through transmission electron microscopy （TEM）,Fourier transform infrared （FTIR） spectra,and Ultraviolet （UV） spectra analysis.The catalytic performance of hydrogenation on the CoMoS nanoparticles was studied with naphthalene as a model compound.It was found that CoMoS catalysts supported on active carbon （AC） was more active than conventional MoS2/γ-Al2O3.The activity of CoMoS/AC can be tailored through the change of the Co/（Co＋Mo） atomic ratio.展开更多
Chemical loss such as surfactants and alkalis by adsorption to reservoir rock surface is an important issue in enhanced oil recovery(EOR). Here, we investigated the adsorption behaviors of anionic surfactants and alka...Chemical loss such as surfactants and alkalis by adsorption to reservoir rock surface is an important issue in enhanced oil recovery(EOR). Here, we investigated the adsorption behaviors of anionic surfactants and alkalis on silica for the first time as a function of temperature using quartz crystal microbalance with dissipation(QCM-D). The results demonstrated that the temperature dependent critical micelle concentration of alcohol alkoxy sulfate(AAS) surfactant can be quantitatively described by the thermodynamics parameters of micellization, showing a mainly entropy-driven process. AAS adsorption was mediated under varying temperature conditions, by divalent cations for bridging effect, monovalent cations competitive for adsorption sites but not giving cation bridging, pH regulation of deprotonated sites of silica, presence of alkoxy groups in the surfactants, and synergistic effect of surfactant coinjection. The addition of organic alkalis can enhance the overall adsorption of the species with AAS,whereas inorganic alkali of Na_(2)CO_(3) had capability of the sequestration of the divalent ions, whose addition would reduce AAS adsorption. The typical AAS adsorption indicated a non-rigid multilayer,estimated to have between 2 and 5 layers, with a likely compact bilayer followed by disorganized and unstable further layering. The new fundamental understanding about temperature effect on surfactants and alkalis adsorption contributes to optimizing the flooding conditions of chemicals and developing more efficient mitigation strategies.展开更多
The interfacial properties and rheological behavior of surfactant/polymer complex systems were measured to investigate the association behavior of the associating polymer.Compared with the pure surfactant solution,the...The interfacial properties and rheological behavior of surfactant/polymer complex systems were measured to investigate the association behavior of the associating polymer.Compared with the pure surfactant solution,there are two inflection points in the surface tension curve for the surfactant/polymer complex systems.The two inflection points are dependent on the surfactant type and polymer concentration.The effect of surfactant on the rheological behavior of polymer can be divided into two aspects.First,the addition of short-chain betaine surfactant is detrimental to the viscosity of polymer solution due to the electrostatic shielding effect.Second,long-chain betaine surfactant also reduces the viscosity of polymer solutions at low concentrations.However,when the concentration of the long-chain betaine surfactant is relatively high,the long-chain betaine surfactant could form worm-like micelles that promote the intermolecular association and thus increase the number of associating junctions,thereby resulting in the augmentation of viscosity.So it is necessary to apply the long-chain betaine surfactant to build the polymer/surfactant flooding system.The interaction model between surfactant and polymer is proposed,which is different from the traditional‘Three-Region Model’.展开更多
Macroscopic SiO2 spheres with a homogeneous amine distribution were synthesized by a one-step emulsion based synthesis approach in a flow column reactor. The CO2 adsorption capacity of the nanostructured amine-functio...Macroscopic SiO2 spheres with a homogeneous amine distribution were synthesized by a one-step emulsion based synthesis approach in a flow column reactor. The CO2 adsorption capacity of the nanostructured amine-functionalized silica spheres was studied in absence and presence of H2O. The structural properties were adjusted by varying solvents and surfactants during the synthesis and, at constant amine loadings, were found to be the main factor for influencing the CO2 sorption capacities. Under water-free conditions CO2 is bound to the amino groups via the formation of carbamates, which require two neighboring amino groups to adsorb one CO2 molecule. At constant amine concentrations sorbents with lower surface area allow to establish a higher amine density on the surface, which enhances the CO2 uptake capacities under dry conditions. In presence of H2O the CO2 adsorption changes to 1：1 stoichiometry due to stabilization of carbamates by protonation of H2O and formation of further species such as bicarbonates, which should in principle double the adsorption capacities. Low concentrations of physisorbed H2O（0.3 mmol/g） did not impair the adsorption capacity of the adsorbents for CO2, while at higher water uptakes（0.6 and 1.1 mmol/g） the CO2 uptake is reduced, which could be attributed to capillary condensation of H2O or formation of bulky reaction products blocking inner pores and access to active sites.展开更多
Polyaniline/indium oxide （PANI/In2O3） nanocomposite thin films have been prepared in water-dispersed medium with the presence of different surfactants by an in-situ self-assembly technique. A cationic surfactant TT...Polyaniline/indium oxide （PANI/In2O3） nanocomposite thin films have been prepared in water-dispersed medium with the presence of different surfactants by an in-situ self-assembly technique. A cationic surfactant TTAB （tetradecyltrimethyl-ammonium bromide） and a non-ionic surfactant tween-20 （poly （ethylene oxide） （20） sorbitan monolaurate） are used as additives. The nanocomposites and thin films are characterized by Fourier transform infrared （FTIR）, transmission electron microscopy （TEM）, and scanning electron microscopy （SEM）, respectively. The optical properties reveal the interaction between PANI/In2O3 nanocomposites and surfactants, and PANI/In2O3 thin films prepared in the presence of surfactants exhibits the finer nanofiber than the surfactants free PANI/In2O3 thin film. The ammonia （NH3） gas-sensing characteristic of PANI/In2O3 thin films and the effect of different surfactants on the gas-sensing property are studied. The results indicated that the film processed in the presence of TTAB has the highest gas sensitivity among all the prepared films.展开更多
Emulsification is one of the important mechanisms of surfactant flooding. To improve oil recovery for low permeability reservoirs, a highly efficient emulsification oil flooding system consisting of anionic surfactant...Emulsification is one of the important mechanisms of surfactant flooding. To improve oil recovery for low permeability reservoirs, a highly efficient emulsification oil flooding system consisting of anionic surfactant sodium alkyl glucosyl hydroxypropyl sulfonate(APGSHS) and zwitterionic surfactant octadecyl betaine(BS-18) is proposed. The performance of APGSHS/BS-18 mixed surfactant system was evaluated in terms of interfacial tension, emulsification capability, emulsion size and distribution, wettability alteration, temperature-resistance and salt-resistance. The emulsification speed was used to evaluate the emulsification ability of surfactant systems, and the results show that mixed surfactant systems can completely emulsify the crude oil into emulsions droplets even under low energy conditions. Meanwhile,the system exhibits good temperature and salt resistance. Finally, the best oil recovery of 25.45% is achieved for low permeability core by the mixed surfactant system with a total concentration of 0.3 wt%while the molar ratio of APGSHS:BS-18 is 4:6. The current study indicates that the anionic/zwitterionic mixed surfactant system can improve the oil flooding efficiency and is potential candidate for application in low permeability reservoirs.展开更多
Effectively separating bastnaesite from calcium-bearing gangue minerals(particularly calcite)presents a formidable challenge,making the development of efficient collectors crucial.To achieve this,we have designed and ...Effectively separating bastnaesite from calcium-bearing gangue minerals(particularly calcite)presents a formidable challenge,making the development of efficient collectors crucial.To achieve this,we have designed and synthesized a novel,highly efficient,water-soluble cationic collector,N-dodecylisopropanolamine(NDIA),for use in the bastnaesite-calcite flotation process.Density functional theory(DFT)calculations identified the amine nitrogen atom in NDIA as the site most susceptible to electrophilic attack and electron loss.By introducing an OH group into the traditional collector dodecylamine(DDA)structure,NDIA provided additional adsorption sites,enabling synergistic adsorption on the surface of bastnaesite,thereby significantly enhancing both the floatability and selectivity of these minerals.The recovery of bastnaesite was 76.02%,while the calcite was 1.26%.The NDIA markedly affected the zeta potential of bastnaesite,while its impact on calcite was relatively minor.Detailed Fourier-transform infrared spectroscopy(FTIR)and X-ray photoelectron spectroscopy(XPS)results elucidated that the―NH―and―OH groups in NDIA anchored onto the bastnaesite surface through robust electrostatic and hydrogen bonding interactions,thereby enhancing bastnaesite's affinity for NDIA.Furthermore,in situ atomic force microscopy(AFM)provided conclusive evidence of NDIA aggregation on the bastnaesite surface,improving contact angle and hydrophobicity,and significantly boosting the flotation recovery of bastnaesite.展开更多
An anion-rich electric double layer(EDL)region is favorable for fabricating an inorganic-rich solid-electrolyte interphase(SEI)towards stable lithium metal anode in ester electrolyte.Herein,cetyltrimethylammonium brom...An anion-rich electric double layer(EDL)region is favorable for fabricating an inorganic-rich solid-electrolyte interphase(SEI)towards stable lithium metal anode in ester electrolyte.Herein,cetyltrimethylammonium bromide(CTAB),a cationic surfactant,is adopted to draw more anions into EDL by ionic interactions that shield the repelling force on anions during lithium plating.In situ electrochemical surface-enhanced Raman spectroscopy results combined with molecular dynamics simulations validate the enrichment of NO_(3)^(−)/FSI−anions in the EDL region due to the positively charged CTA^(+).In-depth analysis of SEI structure by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry results confirmed the formation of the inorganic-rich SEI,which helps improve the kinetics of Li^(+)transfer,lower the charge transfer activation energy,and homogenize Li deposition.As a result,the Li||Li symmetric cell in the designed electrolyte displays a prolongated cycling time from 500 to 1300 h compared to that in the blank electrolyte at 0.5 mA cm^(-2) with a capacity of 1 mAh cm^(-2).Moreover,Li||LiFePO_(4) and Li||LiCoO_(2) with a high cathode mass loading of>10 mg cm^(-2) can be stably cycled over 180 cycles.展开更多
An approach for dominating the channel form of the flexible MIL-53(Fe)was developed by using a surfactant-assisted modified method.The surfactant tetraethylammonium hydroxide(TEAOH)can control the channel form of MIL-...An approach for dominating the channel form of the flexible MIL-53(Fe)was developed by using a surfactant-assisted modified method.The surfactant tetraethylammonium hydroxide(TEAOH)can control the channel form of MIL-53(Fe)to be a“closed-pore”form,whereas the surfactant polyoxyethylene polyoxypropylene polyoxyethylene(P123)or polyvinyl alcohol(PVA)can dominate the channel form of MIL-53(Fe)for a“large-pore”form.The photocatalytic performance of MIL-53(Fe)with different channel forms was investigated through the degradation of rhodamine B(Rh B)in water under violet light irradiation.The results showed that MIL-53(Fe)with a“large-pore”form exhibited higher photocatalytic activity than that of MIL-53(Fe)with a“closed-pore”form.MIL-53(Fe)modified with PVA exhibit the best photocatalytic activity for degrading almost 100%Rh B in 90 minutes.展开更多
基金supported by the National Key Research and Development Program of China (No.2017YFC0804700)the Opening Project of State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology (No.KFJJ23-23M)。
文摘While newer,more efficient Lithium-ion batteries(LIBs)and extinguishing agents have been developed to reduce the occurrence of thermal runaway accidents,there is still a scarcity of research focused on the application of surfactants in different LIBs extinguishing agents,particularly in terms of patented technologies.The aim of this review paper is to provide an overview of the technological progress of LIBs and LIBs extinguishing agents in terms of patents in Korea,Japan,Europe,the United States,China,etc.The initial part of this review paper is sort out LIBs technology development in different regions.In addition,to compare LIBs extinguishing agent progress and challenges of liquid,solid,combination of multiple,and microencapsulated.The subsequent section of this review focuses on an in-depth analysis dedicated to the efficiency and challenges faced by the surfactants corresponding design principles of LIBs extinguishing agents,such as nonionic and anionic surfactants.A total of 451,760 LIBs-related patent and 20 LIBs-fire-extinguishing agent-related patent were included in the analyses.The extinguishing effect,cooling performance,and anti-recombustion on different agents have been highlighted.After a comprehensive comparison of these agents,this review suggests that temperature-sensitive hydrogel extinguishing agent is ideal for the effective control of LIBs fire.The progress and challenges of surfactants have been extensively examined,focusing on key factors such as surface activity,thermal stability,foaming properties,environmental friendliness,and electrical conductivity.Moreover,it is crucial to emphasize that the selection of a suitable surfactant must align with the extinguishing strategy of the extinguishing agent for optimal firefighting effectiveness.
基金the National Natural Science Foundation of China(Grant No.52474071)for their financial support。
文摘A series of spontaneous imbibition(SI)tests of tight oil were performed,together with oil distribution scans by computed tomography(CT)and nuclear magnetic resonance(NMR).Thus,the best surfactants to optimize the SI effect were obtained,the basic requirements to surfactants for efficient SI were determined,and the oil mobilization by SI revealed.The results show that anionic surfactants significantly outperform non-ionic,cationic,and zwitterionic ones in SI process.Excellent systems can be further obtained by mixing anionic surfactants with others(e.g.1:1 mixtures of AES:EHSB).The requirements to interfacial properties of surfactants for achieving efficient SI at permeabilities of 0.05,0.5,and 5.0 mD are as follows:10~0 mN/m,<40°;10-1-10~0 mN/m,<55°;and 10-1-10~0 mN/m,<70°,respectively.Although a high oil recovery of 38.5%by SI was achieved in small cylindrical cores(φ2.5 cm×3.0 cm),the joint SI and CT tests in larger,cube-shaped cores(5.0 cm×5.0 cm×5.0 cm)showed that the SI process could only remove the oil from the outermost few millimeters of the cores with permeabilities of 0.05 and 0.1 mD,indicating the great difficulty encountered for their development.The NMR showed that the SI treatment preferentially removed oil from smaller pores rather than medium or large pores.
基金funded by Fondo Francisco Jose de Caldas,MINCIENCIAS and Agencia Nacional de hidrocarburos(ANH)through contract No.112721-282-2023(Project 1118-1035-9300)with Universidad Nacional de Colombia-Sede Medellin and PAREX RESOURCES COLOMBIA AG SUCURSAL。
文摘The conservation of rheological and filtration properties of drilling fluids is essential during drilling operations.However,high-pressure and high-temperature conditions may affect drilling fluid additives,leading to their degradation and reduced performance during operation.Hence,the main objective of this study is to formulate and evaluate a viscoelastic surfactant(VES)to design water-based drilling nanofluids(DNF).Silica nanomaterials are also incorporated into fluids to improve their main functional characteristics under harsh conditions.The investigation included:i)synthesis and characterization of VES through zeta potential,thermogravimetric analysis(TGA),Fourier transform infrared spectroscopy(FTIR),atomic force microscopy(AFM),and rheological behavior;ii)the effect of the presence of VES combined with silica nanoparticles on the rheological,filtration,thermal,and structural properties by steady and dynamic shear rheological,filter press,thermal aging assays,and SEM(SEM)assays,respectively;and iii)evaluation of filtration properties at the pore scale through a microfluidic approach.The rheological results showed that water-based muds(WBMs)in the presence of VES exhibited shearthinning and viscoelastic behavior slightly higher than that of WBMs with xanthan gum(XGD).Furthermore,the filtration and thermal properties of the drilling fluid improved in the presence of VES and silica nanoparticles at 0.1 wt%.Compared to the WBMs based on XGD,the 30-min filtrate volume for DNF was reduced by 75%.Moreover,the Herschel-Bulkley model was employed to represent the rheological behavior of fluids with an R2of approximately 0.99.According to SEM,laminar and spherical microstructures were observed for the WBMs based on VES and XGD,respectively.A uniform distribution of the nanoparticles was observed in the WBMs.The results obtained from microfluidic experiments indicated low dynamic filtration for fluids containing VES and silica nanoparticles.Specifically,the filtrate volume of fluids containing VES and VES with silica nanoparticles at 281 min was 0.35 and 0.04 m L,respectively.The differences in the rheological,filtration,thermal,and structural results were mainly associated with the morphological structure of VES or XGD and surface interactions with other WBMs additives.
基金supported by the National Key Scientific and Technological Projects (2008ZX05011)
文摘The influences of an anionic-nonionic composite surfactant and petroleum sulfonate, used in surfactant-polymer flooding in Shengli Gudong oilfield, East China, on the interfacial properties of Gudong crude model oil and synthetic formation water was studied by measuring interfacial tension, interfacial viscoelasticity and Zeta potential. The in？ uence of the surfactants on the stability of Gudong water-in-oil （W/O） and oil-in-water （O/W） emulsions was evaluated by separating water from the W/O emulsion and residual oil in the aqueous phase of the O/W emulsion respectively. The results showed that the two kinds of surfactants, namely anionic-nonionic composite surfactant and petroleum sulfonate, are both able to decrease the interfacial tension between the oil phase and the aqueous phase and increase the surface potential of the oil droplets dispersed in the O/W emulsion, which can enhance the stability of the W/O and O/W crude oil emulsions. Compared with petroleum sulfonate, the anionic-nonionic composite surfactant is more interfacially active and able to enhance the strength of the interfacial film between oil and water, hence enhance the stability of the W/O and O/W emulsions more effectively.
基金supported by the Natural Science Foundation of China (Grant No. 51574257)National 973 Project (No. 2015CB250900)
文摘Hydraulic fracturing technology can significantly increase oil production from tight oil formations, but performance data show that production declines rapidly. In the long term, it is necessary to increase the development efficiency of block matrix, surfactant-aided imbibition is a potential way. The current work aimed to explain comprehensively how surfactants can enhance the imbibition rate. Laboratory experiments were performed to investigate the effects of wettability, interfacial tension(IFT), and relative permeability as the key parameters underlying surfactant solution imbibition. Two different types of surfactants, sodium dodecyl sulfate and polyethylene glycol octylphenol ether, at varied concentrations were tested on reservoir rocks. Experimental results showed that the oil recovery rate increased with increased wettability alteration and IFT and decreased residual oil saturation. A mechanistic simulator developed in previous studies was used to perform parametric analysis after successful laboratory-scale validation. Results were proven by parametric studies. This study,which examined the mechanism and factors influencing surfactant solution imbibition, can improve understanding of surfactant-aided imbibition and surfactant screening.
文摘Surfactant flooding is an important technique used to improve oil recovery from mature oil reservoirs due to minimizing the interfacial tension(IFT)between oil and water and/or altering the rock wettability toward water-wet using various surfactant agents including cationic,anionic,non-ionic,and amphoteric varieties.In this study,two amino-acid based surfactants,named lauroyl arginine(L-Arg)and lauroyl cysteine(L-Cys),were synthesized and used to reduce the IFT of oil–water systems and alter the wettability of carbonate rocks,thus improving oil recovery from oil-wet carbonate reservoirs.The synthesized surfactants were characterized using Fourier transform infrared spectroscopy and nuclear magnetic resonance analyses,and the critical micelle concentration(CMC)of surfactant solutions was determined using conductivity,pH,and turbidity techniques.Experimental results showed that the CMCs of L-Arg and L-Cys solutions were 2000 and 4500 ppm,respectively.It was found that using L-Arg and L-Cys solutions at their CMCs,the IFT and contact angle were reduced from 34.5 to 18.0 and15.4 mN/m,and from 144°to 78°and 75°,respectively.Thus,the L-Arg and L-Cys solutions enabled approximately 11.9%and 8.9%additional recovery of OOIP(original oil in place).It was identified that both amino-acid surfactants can be used to improve oil recovery due to their desirable effects on the EOR mechanisms at their CMC ranges.
基金the financial support provided by Council for Scientific and Industrial Research [22(0649)/13/EMR-II], New Delhi, to the Department of Petroleum Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, India
文摘Surfactants for enhanced oil recovery are important to study due to their special characteristics like foam generation,lowering interfacial tension between oleic and aqueous phases,and wettability alteration of reservoir rock surfaces.Foam is a good mobility control agent in enhanced oil recovery for improving the mobility ratio.In the present work,the foaming behavior of three nonionic ethoxylated surfactants,namely Tergitol 15-S-7,Tergitol 15-S-9,and Tergitol 15-S-12,was studied experimentally.Among the surfactants,Tergitol 15-S-12 shows the highest foamability.The effect of Na Cl concentration and synthetic seawater on foaming behavior of the surfactants was investigated by the test-tube shaking method.The critical micelle concentrations of aqueous solutions of the different nonionic surfactants were measured at 300 K.It was found that the critical micelle concentrations of all surfactants also increased with increasing ethylene oxide number.Dynamic light scattering experiments were performed to investigate the micelle sizes of the surfactants at their respective critical micelle concentrations.Core flooding experiments were carried out in sand packs using the surfactant solutions.It was found tha t22% additional oil was recovered in the case of all the surfactants over secondary water flooding.Tergitol 15-S-12exhibited the maximum additional oil recovery which is more than 26%after water injection.
基金UCSI Universitythe Universiti Malaysia Pahang for their continuous support
文摘The present study investigated the wax deposition tendencies of a light Malaysian crude oil（42.4° API）, and the wax inhibiting potential of some surfactants and their blends with nanoparticles. With the knowledge that the majority of the wax inhibition research revolved around polymeric wax inhibitors, which cause environmental issues, we highlighted the potential of surfactants and their blend with SiO2 nanoparticles as wax deposition inhibitors. Different surfactants including oil-based, silane-based, Gemini and bio-surfactants were considered as primary surfactants. The primary surfactants and their respective blends at a concentration of 400 ppm were screened as wax inhibitor candidates using cold finger apparatus. The screening results showed a significant influence on the paraffin inhibition efficiency on wax deposition by using 400 ppm of silane-based surfactant, which decreased the wax deposition up to 53.9% as compared to that of the untreated crude oil. The inhibition efficiency among the silane-based surfactant（highest） and bio-surfactant（lowest）revealed an appreciable difference up to 36.5%. Furthermore, the wax from the treated sample was found to deposit in a thin gel-like form, which adhered inadequately to the surface of the cold finger. A further investigation by blending the 400 ppm silane-based surfactant with a 400 ppm SiO2 nanoparticle suspension in a load ratio of 3：1 found that the wax inhibition decreased up to 81% as compared to the scenario when they were not added. However, we have shown that the synergy between the silane-based surfactant and the nanoparticles is influenced by the concentration and load ratio of surfactant and nanoparticles, residence time, differential temperature and rotation rate.
文摘The ability of a novel nonionic CO2 -soluble surfactant to propagate foam in porous media was compared with that of a conventional anionic surfactant（aqueous soluble only）through core floods with Berea sandstone cores.Both simultaneous and alternating injections have been tested.The novel foam outperforms the conventional one with respect to faster foam propagation and higher desaturation rate.Furthermore,the novel injection strategy,CO2 continuous injection with dissolved CO2 -soluble surfactant,has been tested in the laboratory.Strong foam presented without delay.It is the first time the measured surfactant properties have been used to model foam transport on a field scale to extend our findings with the presence of gravity segregation.Different injection strategies have been tested under both constant rate and pressure constraints.It was showed that novel foam outperforms the conventional one in every scenario with much higher sweep efficiency and injectivity as well as more even pressure redistribution.Also,for this novel foam,it is not necessary that constant pressure injection is better,which has been concluded in previous literature for conventional foam.Furthermore,the novel injection strategy,CO2 continuous injection with dissolved CO2 -soluble surfactant,gave the best performance,which could lower the injection and water treatment cost.
基金supported by the Abu Dhabi National Oil Company and the University of Texas at Austin
文摘The basis of this study is to identify the versatility of N,N,N＇-trimethyl-N＇-tallow-1,3-diaminopropane（DTTM） surfactant in high saline environments. The surfactant was examined with sodium chloride, NaCl, to understand how triggers such as salt, p H, temperature, and surfactant concentration influences the viscoelastic response of the surfactant solution. The DTTM surfactant and salt（NaCl） concentrations used in steady-state shear viscosity analysis range from 0.2 wt% to 2 wt%and 5 wt% to 25 wt%, respectively. Along with DTTM results, three similar chemical structures are investigated to understand how viscosity changes with alterations in tail and head group composition. It was found that DTTM surfactant has the capability of transitioning from a foam-bearing to viscoelastic state at low surfactant concentrations under moderate to high saline conditions. A longer tail length promotes viscoelasticity and shear-thinning behavior. Terminals consisting of hydroxides or ethoxylates have a lower viscosity than that of methyl terminals. A head group consisting of two nitrogen atoms has a higher viscosity than those containing one nitrogen atom. The rheological characterization of DTTM presented in this paper is part of a larger study in determining the capability of this surfactant to foam CO2 for improving mobility control in CO2 enhanced oil recovery in high saline oil formations.
文摘Naturally fractured carbonate reservoirs have very low oil recovery efficiency owing to their wettability and tightness of matrix.However,smart water can enhance oil recovery by changing the wettability of the carbonate rock surface from oilwet to water-wet,and the addition of surfactants can also change surface wettability.In the present study,the effects of a solution of modified seawater with some surfactants,namely C12 TAB,SDS,and TritonX-100(TX-100),on the wettability of carbonate rock were investigated through contact angle measurements.Oil recovery was studied using spontaneous imbibition tests at 25,70,and 90°C,followed by thermal gravity analysis to measure the amount of adsorbed material on the carbonate surface.The results indicated that Ca2+,Mg2+,and SO42-.ions may alter the carbonate rock wettability from oil-wet to water-wet,with further water wettability obtained at higher concentrations of the ions in modified seawater.Removal of NaCl from the imbibing fluid resulted in a reduced contact angle and significantly enhanced oil recovery.Low oil recoveries were obtained with modified seawater at 25 and 70°C,but once the temperature was increased to 90°C,the oil recovery in the spontaneous imbibition experiment increased dramatically.Application of smart water with C12 TAB surfactant at 0.1 wt%changed the contact angle from 161°to 52°and enhanced oil recovery to 72%,while the presence of the anionic surfactant SDS at 0.1 wt%in the smart water increased oil recovery to 64.5%.The TGA analysis results indicated that the adsorbed materials on the carbonate surface were minimal for the solution containing seawater with C12 TAB at 0.1 wt%(SW+CTAB(0.1 wt%)).Based on the experimental results,a mechanism was proposed for wettability alteration of carbonate rocks using smart water with SDS and C12 TAB surfactants.
基金supported by the Shandong Natural Science Foundation(ZR2009BQ008)China University of Petroleum(YO60419)
文摘Oil-soluble bimetallic CoMoS nanoparticles were successfully synthesized by a composite-surfactants-aided-solvothermal process.The surface hydrophilicity and functionality of the products were investigated through transmission electron microscopy （TEM）,Fourier transform infrared （FTIR） spectra,and Ultraviolet （UV） spectra analysis.The catalytic performance of hydrogenation on the CoMoS nanoparticles was studied with naphthalene as a model compound.It was found that CoMoS catalysts supported on active carbon （AC） was more active than conventional MoS2/γ-Al2O3.The activity of CoMoS/AC can be tailored through the change of the Co/（Co＋Mo） atomic ratio.
基金supported by the Shanxi Provincial Key Research and Development Project (No. 20201102002)Science Foundation of China University of Petroleum,Beijing (No. 2462020BJRC007, 2462020YXZZ003)+1 种基金State Key Laboratory of Petroleum Resources and Prospecting,China University of Petroleum (No. PRP/DX-2216)Shell Global Solutions。
文摘Chemical loss such as surfactants and alkalis by adsorption to reservoir rock surface is an important issue in enhanced oil recovery(EOR). Here, we investigated the adsorption behaviors of anionic surfactants and alkalis on silica for the first time as a function of temperature using quartz crystal microbalance with dissipation(QCM-D). The results demonstrated that the temperature dependent critical micelle concentration of alcohol alkoxy sulfate(AAS) surfactant can be quantitatively described by the thermodynamics parameters of micellization, showing a mainly entropy-driven process. AAS adsorption was mediated under varying temperature conditions, by divalent cations for bridging effect, monovalent cations competitive for adsorption sites but not giving cation bridging, pH regulation of deprotonated sites of silica, presence of alkoxy groups in the surfactants, and synergistic effect of surfactant coinjection. The addition of organic alkalis can enhance the overall adsorption of the species with AAS,whereas inorganic alkali of Na_(2)CO_(3) had capability of the sequestration of the divalent ions, whose addition would reduce AAS adsorption. The typical AAS adsorption indicated a non-rigid multilayer,estimated to have between 2 and 5 layers, with a likely compact bilayer followed by disorganized and unstable further layering. The new fundamental understanding about temperature effect on surfactants and alkalis adsorption contributes to optimizing the flooding conditions of chemicals and developing more efficient mitigation strategies.
基金Financial support by the Major Scientific and Technological Projects of CNPC under Grant(No.ZD 2019-183-007)。
文摘The interfacial properties and rheological behavior of surfactant/polymer complex systems were measured to investigate the association behavior of the associating polymer.Compared with the pure surfactant solution,there are two inflection points in the surface tension curve for the surfactant/polymer complex systems.The two inflection points are dependent on the surfactant type and polymer concentration.The effect of surfactant on the rheological behavior of polymer can be divided into two aspects.First,the addition of short-chain betaine surfactant is detrimental to the viscosity of polymer solution due to the electrostatic shielding effect.Second,long-chain betaine surfactant also reduces the viscosity of polymer solutions at low concentrations.However,when the concentration of the long-chain betaine surfactant is relatively high,the long-chain betaine surfactant could form worm-like micelles that promote the intermolecular association and thus increase the number of associating junctions,thereby resulting in the augmentation of viscosity.So it is necessary to apply the long-chain betaine surfactant to build the polymer/surfactant flooding system.The interaction model between surfactant and polymer is proposed,which is different from the traditional‘Three-Region Model’.
基金supported by the German Research Council(DFG)within the priority program(Schwerpunktprogramm),“Poröse Medien mit definierter Porenstruktur in der Verfahrenstechnik–Modellierung,Anwendngen,Synthese”(SPP 1570)under the projects LE 1187/10 and SP 648/4the framework of the DFG Excellence Initiative the Cluster of Excellence“Engineering of Advanced Materials”(DFG EXC 415)funding via the DFG research training group GRK 1896
文摘Macroscopic SiO2 spheres with a homogeneous amine distribution were synthesized by a one-step emulsion based synthesis approach in a flow column reactor. The CO2 adsorption capacity of the nanostructured amine-functionalized silica spheres was studied in absence and presence of H2O. The structural properties were adjusted by varying solvents and surfactants during the synthesis and, at constant amine loadings, were found to be the main factor for influencing the CO2 sorption capacities. Under water-free conditions CO2 is bound to the amino groups via the formation of carbamates, which require two neighboring amino groups to adsorb one CO2 molecule. At constant amine concentrations sorbents with lower surface area allow to establish a higher amine density on the surface, which enhances the CO2 uptake capacities under dry conditions. In presence of H2O the CO2 adsorption changes to 1：1 stoichiometry due to stabilization of carbamates by protonation of H2O and formation of further species such as bicarbonates, which should in principle double the adsorption capacities. Low concentrations of physisorbed H2O（0.3 mmol/g） did not impair the adsorption capacity of the adsorbents for CO2, while at higher water uptakes（0.6 and 1.1 mmol/g） the CO2 uptake is reduced, which could be attributed to capillary condensation of H2O or formation of bulky reaction products blocking inner pores and access to active sites.
基金supported by the National Natural Science Foundation of China under Grant No. 60736005China-Australian Cooperative Foundation under Grant No. 60425101-1
文摘Polyaniline/indium oxide （PANI/In2O3） nanocomposite thin films have been prepared in water-dispersed medium with the presence of different surfactants by an in-situ self-assembly technique. A cationic surfactant TTAB （tetradecyltrimethyl-ammonium bromide） and a non-ionic surfactant tween-20 （poly （ethylene oxide） （20） sorbitan monolaurate） are used as additives. The nanocomposites and thin films are characterized by Fourier transform infrared （FTIR）, transmission electron microscopy （TEM）, and scanning electron microscopy （SEM）, respectively. The optical properties reveal the interaction between PANI/In2O3 nanocomposites and surfactants, and PANI/In2O3 thin films prepared in the presence of surfactants exhibits the finer nanofiber than the surfactants free PANI/In2O3 thin film. The ammonia （NH3） gas-sensing characteristic of PANI/In2O3 thin films and the effect of different surfactants on the gas-sensing property are studied. The results indicated that the film processed in the presence of TTAB has the highest gas sensitivity among all the prepared films.
基金financially supported by National Natural Science Foundation of China(No.22302229)Beijing Municipal Excellent Talent Training Funds Youth Advanced Individual Project(No.2018000020124G163)。
文摘Emulsification is one of the important mechanisms of surfactant flooding. To improve oil recovery for low permeability reservoirs, a highly efficient emulsification oil flooding system consisting of anionic surfactant sodium alkyl glucosyl hydroxypropyl sulfonate(APGSHS) and zwitterionic surfactant octadecyl betaine(BS-18) is proposed. The performance of APGSHS/BS-18 mixed surfactant system was evaluated in terms of interfacial tension, emulsification capability, emulsion size and distribution, wettability alteration, temperature-resistance and salt-resistance. The emulsification speed was used to evaluate the emulsification ability of surfactant systems, and the results show that mixed surfactant systems can completely emulsify the crude oil into emulsions droplets even under low energy conditions. Meanwhile,the system exhibits good temperature and salt resistance. Finally, the best oil recovery of 25.45% is achieved for low permeability core by the mixed surfactant system with a total concentration of 0.3 wt%while the molar ratio of APGSHS:BS-18 is 4:6. The current study indicates that the anionic/zwitterionic mixed surfactant system can improve the oil flooding efficiency and is potential candidate for application in low permeability reservoirs.
基金supported by the the National Key R&D Program of China(No.2021YFC2900800)National Natural Science Foundation of China(Nos.52425406,51874247,51922091,and 52204285)+4 种基金the Open Research Fund of State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization(No.CNMRCUKF2001)Science and Technology Major Project of Ordos City-Iconic Innovation Team and “Rejuvenating Inner Mongolia through Science and Technology”(No.202204/2023)Yueqi Outstanding Scholar Award of CUMTB(No.202022)Funded by Open Foundation of State Key Laboratory of Mineral Processing(No.BGRIMM-KJSKL-2023-05)Fundamental Research Funds for the Central Universities(Ph.D.Top Innovative Talents Fund of CUMT BBJ2024048)。
文摘Effectively separating bastnaesite from calcium-bearing gangue minerals(particularly calcite)presents a formidable challenge,making the development of efficient collectors crucial.To achieve this,we have designed and synthesized a novel,highly efficient,water-soluble cationic collector,N-dodecylisopropanolamine(NDIA),for use in the bastnaesite-calcite flotation process.Density functional theory(DFT)calculations identified the amine nitrogen atom in NDIA as the site most susceptible to electrophilic attack and electron loss.By introducing an OH group into the traditional collector dodecylamine(DDA)structure,NDIA provided additional adsorption sites,enabling synergistic adsorption on the surface of bastnaesite,thereby significantly enhancing both the floatability and selectivity of these minerals.The recovery of bastnaesite was 76.02%,while the calcite was 1.26%.The NDIA markedly affected the zeta potential of bastnaesite,while its impact on calcite was relatively minor.Detailed Fourier-transform infrared spectroscopy(FTIR)and X-ray photoelectron spectroscopy(XPS)results elucidated that the―NH―and―OH groups in NDIA anchored onto the bastnaesite surface through robust electrostatic and hydrogen bonding interactions,thereby enhancing bastnaesite's affinity for NDIA.Furthermore,in situ atomic force microscopy(AFM)provided conclusive evidence of NDIA aggregation on the bastnaesite surface,improving contact angle and hydrophobicity,and significantly boosting the flotation recovery of bastnaesite.
基金financial support from Singapore Ministry of Education under its AcRF Tier 2 Grant No MOE-T2EP10123-0001Singapore National Research Foundation Investigatorship under Grant No NRF-NRFI08-2022-0009Academic Excellence Foundation of BUAA for PhD Students(applicant:Hongfei Xu).
文摘An anion-rich electric double layer(EDL)region is favorable for fabricating an inorganic-rich solid-electrolyte interphase(SEI)towards stable lithium metal anode in ester electrolyte.Herein,cetyltrimethylammonium bromide(CTAB),a cationic surfactant,is adopted to draw more anions into EDL by ionic interactions that shield the repelling force on anions during lithium plating.In situ electrochemical surface-enhanced Raman spectroscopy results combined with molecular dynamics simulations validate the enrichment of NO_(3)^(−)/FSI−anions in the EDL region due to the positively charged CTA^(+).In-depth analysis of SEI structure by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry results confirmed the formation of the inorganic-rich SEI,which helps improve the kinetics of Li^(+)transfer,lower the charge transfer activation energy,and homogenize Li deposition.As a result,the Li||Li symmetric cell in the designed electrolyte displays a prolongated cycling time from 500 to 1300 h compared to that in the blank electrolyte at 0.5 mA cm^(-2) with a capacity of 1 mAh cm^(-2).Moreover,Li||LiFePO_(4) and Li||LiCoO_(2) with a high cathode mass loading of>10 mg cm^(-2) can be stably cycled over 180 cycles.
基金This research was supported by the Natural Science Foundation of Guangdong Province(No.2018A030307058)the Projects of Talents Recruitment of GDUPT(72100003177).
文摘An approach for dominating the channel form of the flexible MIL-53(Fe)was developed by using a surfactant-assisted modified method.The surfactant tetraethylammonium hydroxide(TEAOH)can control the channel form of MIL-53(Fe)to be a“closed-pore”form,whereas the surfactant polyoxyethylene polyoxypropylene polyoxyethylene(P123)or polyvinyl alcohol(PVA)can dominate the channel form of MIL-53(Fe)for a“large-pore”form.The photocatalytic performance of MIL-53(Fe)with different channel forms was investigated through the degradation of rhodamine B(Rh B)in water under violet light irradiation.The results showed that MIL-53(Fe)with a“large-pore”form exhibited higher photocatalytic activity than that of MIL-53(Fe)with a“closed-pore”form.MIL-53(Fe)modified with PVA exhibit the best photocatalytic activity for degrading almost 100%Rh B in 90 minutes.
