Formamidinium lead bromide(FAPbBr_(3))nanocrystals(NCs)have been considered to be a good optoelectronic material due to their pure green emission,excellent stability and superior carrier transport characteristics.Howe...Formamidinium lead bromide(FAPbBr_(3))nanocrystals(NCs)have been considered to be a good optoelectronic material due to their pure green emission,excellent stability and superior carrier transport characteristics.However,two-photon pumped amplified spontaneous emission(ASE)and the corresponding nonlinear optical properties of FAPbBr_(3) NCs are scarcely revealed.Herein,we synthesized colloidal FAPbBr_(3) NCs with different sizes by changing the molar ratio of FABr/PbBr_(2) in the precursor solution,using ligand assisted precipitation(LARP)technology at room temperature.Photoluminescence(PL)and time resolved photoluminescence(TRPL)spectroscopy were measured to characterize their ASE properties.And their nonlinear optical properties were studied through the Zscan technique and the two-photon excited fluorescence method.The stimulated emission properties including oneand two-photon pumped ASE have been realized from FAPbBr_(3) NCs.With large two-photon absorption coefficient(0.27 cm/GW)and high non-linear absorption cross-section(7.52×10^(5) GM),ASE with threshold as low as 9.8μJ/cm^(2) and 487μJ/cm^(2) have been obtained from colloidal FAPbBr_(3) NCs using one-and two-photon excitations.These results indicate that as a new possible green-emitting frequency-upconversion material with low thresholds,FAPbBr_(3) NCs hold great potential in the development of high-performance two-photon pump lasers.展开更多
根据三轴光纤陀螺的高精度需求,采用大功率高稳定性的高精度双程后向方案掺铒光纤光源。通过对ASE光源的理论分析建立数学模型,并根据所用掺铒光纤及泵浦光源的参数对光源进行谱型分析,确定光路方案。再以掺铒光纤和泵浦激光器的温度特...根据三轴光纤陀螺的高精度需求,采用大功率高稳定性的高精度双程后向方案掺铒光纤光源。通过对ASE光源的理论分析建立数学模型,并根据所用掺铒光纤及泵浦光源的参数对光源进行谱型分析,确定光路方案。再以掺铒光纤和泵浦激光器的温度特性和补偿为研究重点,对掺铒光纤的长度和掺杂浓度以及泵浦功率和铒纤的匹配性进行试验,最终采用铒纤长度19 m,泵浦波长974.6 nm,泵浦功率140 m A,得到光源光功率为20 m W,平均波长变化量小于0.5′10^(-6)/℃,满足光纤陀螺对ASE光源的要求。展开更多
文摘Formamidinium lead bromide(FAPbBr_(3))nanocrystals(NCs)have been considered to be a good optoelectronic material due to their pure green emission,excellent stability and superior carrier transport characteristics.However,two-photon pumped amplified spontaneous emission(ASE)and the corresponding nonlinear optical properties of FAPbBr_(3) NCs are scarcely revealed.Herein,we synthesized colloidal FAPbBr_(3) NCs with different sizes by changing the molar ratio of FABr/PbBr_(2) in the precursor solution,using ligand assisted precipitation(LARP)technology at room temperature.Photoluminescence(PL)and time resolved photoluminescence(TRPL)spectroscopy were measured to characterize their ASE properties.And their nonlinear optical properties were studied through the Zscan technique and the two-photon excited fluorescence method.The stimulated emission properties including oneand two-photon pumped ASE have been realized from FAPbBr_(3) NCs.With large two-photon absorption coefficient(0.27 cm/GW)and high non-linear absorption cross-section(7.52×10^(5) GM),ASE with threshold as low as 9.8μJ/cm^(2) and 487μJ/cm^(2) have been obtained from colloidal FAPbBr_(3) NCs using one-and two-photon excitations.These results indicate that as a new possible green-emitting frequency-upconversion material with low thresholds,FAPbBr_(3) NCs hold great potential in the development of high-performance two-photon pump lasers.
文摘根据三轴光纤陀螺的高精度需求,采用大功率高稳定性的高精度双程后向方案掺铒光纤光源。通过对ASE光源的理论分析建立数学模型,并根据所用掺铒光纤及泵浦光源的参数对光源进行谱型分析,确定光路方案。再以掺铒光纤和泵浦激光器的温度特性和补偿为研究重点,对掺铒光纤的长度和掺杂浓度以及泵浦功率和铒纤的匹配性进行试验,最终采用铒纤长度19 m,泵浦波长974.6 nm,泵浦功率140 m A,得到光源光功率为20 m W,平均波长变化量小于0.5′10^(-6)/℃,满足光纤陀螺对ASE光源的要求。
