Naturally degradable capsule provides a platform for sustained fragrance release.However,practical challenges such as low encapsulation efficiency and difficulty in sustained release are still limited in using fragran...Naturally degradable capsule provides a platform for sustained fragrance release.However,practical challenges such as low encapsulation efficiency and difficulty in sustained release are still limited in using fragranceloaded capsules.In this work,the natural materials sodium alginate and gelatine are dissolved and act as the aqueous phase,lavender is dissolved in caprylic/capric triglyceride(GTCC)as the oil phase,and SiO_(2) nanoparticles with neutralwettability as a solid emulsifier to form O/W Pickering emulsions simultaneously.Finally,multi-core capsules are prepared using the drop injection method with emulsions as templates.The results show that the capsules have been successfully prepared with a spherical morphology and multi-core structure,and the encapsulation rate of multi-core capsules can reach up to 99.6%.In addition,the multi-core capsules possess desirable sustained release performance,the cumulative sustained release rate of fragrance at 25℃over 49 days is only 32.5%.It is attributed to the significant protection of multi-core structure,Pickering emulsion nanoparticle membranes,and hydrogel network shell for encapsulated fragrance.This study is designed to deliver a new strategy for using sustained-release technology with fragrance in food,cosmetics,textiles,and other fields.展开更多
Zirconium,titanium,and other hexagonally close-packed(HCP)metals and their alloys are representative high specific strength,high reaction enthalpy,and high thermal conductivity structural materials.In this study,two t...Zirconium,titanium,and other hexagonally close-packed(HCP)metals and their alloys are representative high specific strength,high reaction enthalpy,and high thermal conductivity structural materials.In this study,two typical HCP metals,zirconium,and titanium,were applied to reactive materials(RMs)to prepare Zr/PTFE/W RMs and Ti/PTFE/W RMs,validating the feasibility of HCP metal/PTFE/W RMs.The impact response process of typical HCP metal/PTFE/W RMs under high-velocity dynamic loads was studied using shock equations of state(EOS)based on porous mixtures and chemical reaction kinetics equations.An improved hemispherical quasi-sealed test chamber was employed to measure the energy release characteristic curves of 10 types of Zr/PTFE/W RMs and Ti/PTFE/W RMs under impact velocities ranging from 500 m/s to 1300 m/s.The datasets of the impact-induced energy release characteristics of HCP metal/PTFE/W RMs were established.Additionally,the energy release efficiency of HCP metal/PTFE/W RMs under impact was predicted using the support vector regression(SVR)kernel function model.The datasets of Zr/PTFE/W RMs and Ti/PTFE/W RMs with W contents of 0%,25%,50%,and 75%were used as test sets,respectively.The model predictions showed a high degree of agreement with the experimental data,with mean absolute errors(MAE)of 4.8,6.5,4.6,and 4.1,respectively.展开更多
High-entropy alloys(HEAs)with multi-component elements have attracted significant interest since they exhibit numerous superior properties compared to traditional ones.These properties include significant energy relea...High-entropy alloys(HEAs)with multi-component elements have attracted significant interest since they exhibit numerous superior properties compared to traditional ones.These properties include significant energy release,remarkable fracture toughness,and high strength,making them promising candidates as energetic structural materials(ESMs).This paper summarizes the energy release mechanisms under dynamic impact and the mechanical behavior of TiZr-based HEAs,TiNb-based HEAs,andWbased HEA,including velocity threshold for energy release,chamber quasi-static pressure curve,energy release efficiency,interface reactions,and"self-sharpening".In addition,we propose future research directions for their energy release and mechanical behavior.展开更多
To investigate the differences in combustion and energy release characteristics of metastable intermolecular composite materials composed of aluminum alloys and polyvinylidene fluoride(PVDF)with different compositions...To investigate the differences in combustion and energy release characteristics of metastable intermolecular composite materials composed of aluminum alloys and polyvinylidene fluoride(PVDF)with different compositions,two types of alloys were selected:Al-Mg and Al-Si.Pure aluminum powder of the same size was also chosen for comparison.The PVDF-coated metal particle composites and the mixtures of PVDF with metal particles were prepared using electrospray(ES)and physical blending methods(PM),respectively.A systematic study was conducted on the morphology,compositional structure,combustion performance,energy release characteristics,and thermal reactivity of the fabricated composites and their combustion products through scanning electron microscopy(SEM),energy-dispersive X-ray spectroscopy(EDS),X-ray diffraction(XRD),combustion performance experiments,closed vessel pressure tests,and simultaneous thermogravimetric-differential scanning calorimetry(TG-DSC).The experimental results indicated that the PVDF-coated metal particles prepared by the electrospray method exhibited a distinct core-shell structure,with the metal particles in close contact with the PVDF matrix.Compared to the PM blended materials,the ES composites demonstrated superior combustion performance and energy release characteristics during combustion.Analysis of different metal fuel systems under identical preparation conditions revealed that Al-Mg and Al-Si fuels modulate the combustion and energy release properties of aluminum alloy-PVDF MICs through two distinct pathways.展开更多
Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-elem...Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-element Ti-Zr-Ta alloys with good casting performance were studied.The microstructure of the Ti_(x)ZrTa alloys gradually change from BCC+HCP to single BCC structure with the increase of Ti.While the Ti_(2)Zr_(y)Ta alloys was still uniform and single BCC structure with the increase of Zr.The evolution of microstructure and composition then greatly affect the mechanical properties and energy-release characteristics of Ti-Zr-Ta alloys.The synergistic effect of dual phase structure increases the fracture strain of Ti_(x)ZrTa(x=0.2,0.5)with the Ti content decreases,while the fracture strain of Ti_(x)ZrTa(x=2.0,3.0,4.0)gradually increase with the Ti content increases caused by the annihilation of the obstacles for dislocation movement.And as Zr content increases,the fracture strain of Ti_(2)Zr_(y)Ta alloys decrease,then the oxidation reaction rate and fragmentation degree gradually increase.The higher oxidation rate and the lager exposed oxidation area jointly leads the higher releasing energy efficiency of Ti_(x)ZrTa alloys with low Ti content and Ti_(2)Zr_(y)Ta alloys with high Zr content.展开更多
Titanium hydride(TiH_(2)), a promising high-energy additive, is doped into PTFE/Al to optimize the energy output structure of the reactive jet and strive for better aftereffect damage ability to the target. Six types ...Titanium hydride(TiH_(2)), a promising high-energy additive, is doped into PTFE/Al to optimize the energy output structure of the reactive jet and strive for better aftereffect damage ability to the target. Six types of PTFE/Al/TiH_(2) reactive liners with different TiH_(2) content are prepared by the molding and sintering method. The energy release characteristics of PTFE/Al/TiH_(2) reactive jet are tested by the transient explosion energy test, and are characterized from pressure and temperature. The reaction delay time,pressure history, and temperature history of the energy release process are obtained, then the actual value of released energy and reaction efficiency of the reactive jet are calculated. The results show that the peak pressure and temperature of the PTFE/Al/TiH_(2) jet initially increase and then decrease with increasing TiH_(2) content. When the TiH_(2) content is 10%, the actual value of released energy and reaction efficiency increased by 24% and 6.4%, respectively, compared to the PTFE/Al jet. The reaction duration of the reactive material is significantly prolonged as the TiH_(2) content increased from 0% to 30%. Finally,combined with the energy release behaviors of PAT material and the dynamic deformation process of liner, the enhancement mechanism of TiH_(2) on energy release of the reactive jet is expounded.展开更多
Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows sig...Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows significant differences.However,at present,there are few effective methods for evaluating the energy release characteristics of the middle reaction stage of such explosives,which can have a duration of tens to hundreds of microseconds.The present work demonstrates an approach to assessing the midstage of an aluminized explosive detonation based on a water push test employing a high degree of confinement.In this method,the explosive is contained in a steel cylinder having one end closed that is installed at the bottom of a transparent water tank.Upon detonation,the gaseous products expand in one direction while forcing water ahead of them.The resulting underwater shock wave and the interface between the gas phase products and the water are tracked using an ultra-high-speed framing and streak camera.The shock wave velocity in water and the expansion work performed by the gaseous detonation products were calculated to assess the energy release characteristics of aluminized explosives such as CL-20 and RDX in the middle stage of the detonation reaction.During the middle stage of the detonation process of these aluminized explosives,the aluminum reaction reduced the attenuation of shock waves and increased the work performed by gas phase products.A higher aluminum content increased the energy output while the presence of oxidants slowed the energy release rate.This work demonstrates an effective means of evaluating the performance of aluminized explosives.展开更多
To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to succe...To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first time.The effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first time.The microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical propellant.Meanwhile,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.展开更多
The laser-guided bomb(LGB)is an air-to-ground pre-cision-guided weapon that offers high hit rates,great power,and ease of use.LGBs are guided by semi-active laser ground-seek-ing technology,which means that atmospheri...The laser-guided bomb(LGB)is an air-to-ground pre-cision-guided weapon that offers high hit rates,great power,and ease of use.LGBs are guided by semi-active laser ground-seek-ing technology,which means that atmospheric conditions can affect their accuracy.The spatial release region(SRR)of LGBs is difficult to calculate precisely,especially when there is a poor field of view.This can result in a lower real hit probability.To increase the hit probability of LGBs in tough atmospheric situa-tions,a novel method for calculating the SRR has been pro-posed.This method is based on the transmittance model of the 1.06μm laser in atmospheric species and the laser diffuse reflection model of the target surface to determine the capture target time of the laser seeker.Then,it calculates the boundary ballistic space starting position by ballistic model and gets the spatial scope of the spatial release region.This method can determine the release region of LGBs based on flight test data such as instantaneous velocity,altitude,off-axis angle,and atmospheric visibility.By more effectively employing aircraft release conditions,atmospheric visibility and other factors,the SRR calculation method can improve LGB hit probabi-lity by 9.2%.展开更多
Enhancement release has been proven effective in natural resources recovery of Chinese shrimp Fenneropenaeus chinensis in the last several decades in China, however, to assess the effectiveness of enhancement release,...Enhancement release has been proven effective in natural resources recovery of Chinese shrimp Fenneropenaeus chinensis in the last several decades in China, however, to assess the effectiveness of enhancement release, we still need to develop a high-efficient and easy-operational method to replace those physical-tagging release method with labor intensive, size-and number-limited. In the present study, single(with maternal known) parentage identification using eight simple sequence repeat(SSR) markers genotype fingerprint was used to trace Chinese shrimp released in Bohai Bay in 2013. A total of 884 shrimp spawners were collected from two hatcheries in Tianjin City respectively after enhancement release of shrimp larvae in May 2013. A total of 844 shrimp samples were recaptured around the release location approximately 4 months after the shrimp larvae were released into the natural sea. Genotype data of 8 SSR loci of the 1,726 samples were used for maternal-offspring parentage identification using CEervus 3.0 software. The allele number in each locus ranged from 8 to 68 with an average value of 33.25, which produced the cumulative exclusion probability with one parent known of all these sight loci up to 99%. Among the 844 recaptured shrimp samples, 448(♂:♀=212:232, gender information was lost for 4 samples) were successfully traced to their 337 maternal parents using a logarithm of odds(LOD) > 3.0 threshold. Among these 337 maternal parents, 253 had a single offspring, 62 had two offspring, 18 had three offspring, 3 had four offspring, and 1 had five offspring. For the first time, a large number of released shrimp were identified from recapture samples, and this study showed that it is possible to trace all released Chinese shrimp without using any type of physical tag in enhancement release activities. This not only means more precise recapture ratio assessment than ever expected, but also this method demonstrates an effective method for large-scale hatchery release as well as for organisms used in hatchery enhancement which are not suitable for physical tagging.展开更多
Reactive Materials(RMs),a new material with structural and energy release characteristics under shockinduced chemical reactions,are promising in extensive applications in national defense and military fields.They can ...Reactive Materials(RMs),a new material with structural and energy release characteristics under shockinduced chemical reactions,are promising in extensive applications in national defense and military fields.They can increase the lethality of warheads due to their dual functionality.This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading.Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs,temperature distribution,peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material(RM)warhead casings by using high-speed camera,infrared thermal imager temperature and peak overpressure testing and scanning electron microscope.Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings.The RM casings can improve the peak overpressure of the air shock wave under explosion loading,though the results are different with different charge ratios.According to the energy release characteristics of the RM,increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave,while reducing the thickness will increase the peak overpressure of the far-field air shock wave.展开更多
It is the basic requirement of the synergetic exploitation of deep mineral resources and geothermal resources to arrange the heat transfer tube in filling body. The heat release performance of filling body directly im...It is the basic requirement of the synergetic exploitation of deep mineral resources and geothermal resources to arrange the heat transfer tube in filling body. The heat release performance of filling body directly impacts on the exploiting efficiency of geothermal energy. Based on heat transfer theory, a three-dimensional unsteady heat transfer model of filling body is established by using FLUENT simulation software. Taking the horizontal U-shaped buried pipe as research object, the variation of temperature field in filling body around buried pipe is analyzed during the heat release process of filling body;the initial temperature of filling body, the diameter of buried pipe, the inlet temperature and inlet velocity of heat transfer fluid influencing of coupling heat transfer, which exists between heat transfer fluid and surrounding filling body within a certain axial distance of buried tube, and influencing of temperature difference between inlet and outlet of heat transfer fluid and on heat transfer performance of filling body are also discussed. It not only lays a theoretical foundation for the synergetic exploitation of mineral resources and geothermal energy in deep mines, but also provides a reference basis for the arrangement of buried pipes in filling body as well as the selection of working conditions for heat transfer fluid.展开更多
Radon is a polluting and radioactive gas released by rock fracture. Shear fracture is widely developed in surrounding rock mass of deep engineering. Nevertheless, the correlation between radon release and the shear fr...Radon is a polluting and radioactive gas released by rock fracture. Shear fracture is widely developed in surrounding rock mass of deep engineering. Nevertheless, the correlation between radon release and the shear fracture is undefined. In this study, the intact Jinping marble and Baihetan basalt were adopted as samples. Based on radionuclide content analysis, the intrinsic characteristics of radon emission were analyzed. Then a direct shear testing system was designed to synchronously measure radon release during rock fracture. The direct shear tests were carried out under different normal stresses. The relationship between shear fracture process and cumulative radon concentration was explored. The results indicated that radon release varied with the increase of shear displacement under the same normal stress. The general pattern showed a slight increase and fell in the initial loading phase, then increased rapidly to the peak release approximately corresponding to the peak of shear stress, and finally decreased to a stable level with the development of shear displacement after sample failure. The initial and peak radon concentrations increased linearly with the increase of normal stress. The same trend was found in shear failure surface area and cumulative radon concentration according to the rise angle(RA) value-average frequency(AF) distribution.展开更多
文摘Naturally degradable capsule provides a platform for sustained fragrance release.However,practical challenges such as low encapsulation efficiency and difficulty in sustained release are still limited in using fragranceloaded capsules.In this work,the natural materials sodium alginate and gelatine are dissolved and act as the aqueous phase,lavender is dissolved in caprylic/capric triglyceride(GTCC)as the oil phase,and SiO_(2) nanoparticles with neutralwettability as a solid emulsifier to form O/W Pickering emulsions simultaneously.Finally,multi-core capsules are prepared using the drop injection method with emulsions as templates.The results show that the capsules have been successfully prepared with a spherical morphology and multi-core structure,and the encapsulation rate of multi-core capsules can reach up to 99.6%.In addition,the multi-core capsules possess desirable sustained release performance,the cumulative sustained release rate of fragrance at 25℃over 49 days is only 32.5%.It is attributed to the significant protection of multi-core structure,Pickering emulsion nanoparticle membranes,and hydrogel network shell for encapsulated fragrance.This study is designed to deliver a new strategy for using sustained-release technology with fragrance in food,cosmetics,textiles,and other fields.
基金sponsored by the National Natural Science Foundation of China(Grant Nos.U2241285,62201267)。
文摘Zirconium,titanium,and other hexagonally close-packed(HCP)metals and their alloys are representative high specific strength,high reaction enthalpy,and high thermal conductivity structural materials.In this study,two typical HCP metals,zirconium,and titanium,were applied to reactive materials(RMs)to prepare Zr/PTFE/W RMs and Ti/PTFE/W RMs,validating the feasibility of HCP metal/PTFE/W RMs.The impact response process of typical HCP metal/PTFE/W RMs under high-velocity dynamic loads was studied using shock equations of state(EOS)based on porous mixtures and chemical reaction kinetics equations.An improved hemispherical quasi-sealed test chamber was employed to measure the energy release characteristic curves of 10 types of Zr/PTFE/W RMs and Ti/PTFE/W RMs under impact velocities ranging from 500 m/s to 1300 m/s.The datasets of the impact-induced energy release characteristics of HCP metal/PTFE/W RMs were established.Additionally,the energy release efficiency of HCP metal/PTFE/W RMs under impact was predicted using the support vector regression(SVR)kernel function model.The datasets of Zr/PTFE/W RMs and Ti/PTFE/W RMs with W contents of 0%,25%,50%,and 75%were used as test sets,respectively.The model predictions showed a high degree of agreement with the experimental data,with mean absolute errors(MAE)of 4.8,6.5,4.6,and 4.1,respectively.
基金the funding from the Overseas Young Talents Program(22GAA00842)the Hebei Natural Science Foundation(E2024105032)+4 种基金the Youth Academic Startup Program at Beijing Institute of Technology(RCPT-6120210286)the"National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact(No.WDZC2022-1)""National Natural Science Foundation of China(No.52271141)"the support of"National Natural Science Foundation of China(Grant No.12222204 and 12072045)"the support of"National Natural Science Foundation of China(Grant No.52331006)".
文摘High-entropy alloys(HEAs)with multi-component elements have attracted significant interest since they exhibit numerous superior properties compared to traditional ones.These properties include significant energy release,remarkable fracture toughness,and high strength,making them promising candidates as energetic structural materials(ESMs).This paper summarizes the energy release mechanisms under dynamic impact and the mechanical behavior of TiZr-based HEAs,TiNb-based HEAs,andWbased HEA,including velocity threshold for energy release,chamber quasi-static pressure curve,energy release efficiency,interface reactions,and"self-sharpening".In addition,we propose future research directions for their energy release and mechanical behavior.
基金the National Natural Science Foundation of China(NSFC,Grant Nos.52176114 and 52306145)Natural Science Foundation of Jiangsu Province(Grant No.BK20230929)+3 种基金China Postdoctoral Science Foundation(Grant No.2023M731693)Fundamental Research Funds for the Central Universities,Grant No.30924010505Jiangsu Funding Program for Excellent Postdoctoral Talentthe Center of Analytical Facilities,Nanjing University of Science and Technology for providing technical equipment support for this article。
文摘To investigate the differences in combustion and energy release characteristics of metastable intermolecular composite materials composed of aluminum alloys and polyvinylidene fluoride(PVDF)with different compositions,two types of alloys were selected:Al-Mg and Al-Si.Pure aluminum powder of the same size was also chosen for comparison.The PVDF-coated metal particle composites and the mixtures of PVDF with metal particles were prepared using electrospray(ES)and physical blending methods(PM),respectively.A systematic study was conducted on the morphology,compositional structure,combustion performance,energy release characteristics,and thermal reactivity of the fabricated composites and their combustion products through scanning electron microscopy(SEM),energy-dispersive X-ray spectroscopy(EDS),X-ray diffraction(XRD),combustion performance experiments,closed vessel pressure tests,and simultaneous thermogravimetric-differential scanning calorimetry(TG-DSC).The experimental results indicated that the PVDF-coated metal particles prepared by the electrospray method exhibited a distinct core-shell structure,with the metal particles in close contact with the PVDF matrix.Compared to the PM blended materials,the ES composites demonstrated superior combustion performance and energy release characteristics during combustion.Analysis of different metal fuel systems under identical preparation conditions revealed that Al-Mg and Al-Si fuels modulate the combustion and energy release properties of aluminum alloy-PVDF MICs through two distinct pathways.
基金supported by the National Natural Science Foundation of China(Grant Nos.52171166,11972372 and U20A20231)supported by Sinoma Institute of Materials Research(Guang Zhou)Co.,Ltd。
文摘Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-element Ti-Zr-Ta alloys with good casting performance were studied.The microstructure of the Ti_(x)ZrTa alloys gradually change from BCC+HCP to single BCC structure with the increase of Ti.While the Ti_(2)Zr_(y)Ta alloys was still uniform and single BCC structure with the increase of Zr.The evolution of microstructure and composition then greatly affect the mechanical properties and energy-release characteristics of Ti-Zr-Ta alloys.The synergistic effect of dual phase structure increases the fracture strain of Ti_(x)ZrTa(x=0.2,0.5)with the Ti content decreases,while the fracture strain of Ti_(x)ZrTa(x=2.0,3.0,4.0)gradually increase with the Ti content increases caused by the annihilation of the obstacles for dislocation movement.And as Zr content increases,the fracture strain of Ti_(2)Zr_(y)Ta alloys decrease,then the oxidation reaction rate and fragmentation degree gradually increase.The higher oxidation rate and the lager exposed oxidation area jointly leads the higher releasing energy efficiency of Ti_(x)ZrTa alloys with low Ti content and Ti_(2)Zr_(y)Ta alloys with high Zr content.
基金National Natural Science Foundation of China (Grant No. 12002045)State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology (QNKT22-09) to provide fund for conducting experiments。
文摘Titanium hydride(TiH_(2)), a promising high-energy additive, is doped into PTFE/Al to optimize the energy output structure of the reactive jet and strive for better aftereffect damage ability to the target. Six types of PTFE/Al/TiH_(2) reactive liners with different TiH_(2) content are prepared by the molding and sintering method. The energy release characteristics of PTFE/Al/TiH_(2) reactive jet are tested by the transient explosion energy test, and are characterized from pressure and temperature. The reaction delay time,pressure history, and temperature history of the energy release process are obtained, then the actual value of released energy and reaction efficiency of the reactive jet are calculated. The results show that the peak pressure and temperature of the PTFE/Al/TiH_(2) jet initially increase and then decrease with increasing TiH_(2) content. When the TiH_(2) content is 10%, the actual value of released energy and reaction efficiency increased by 24% and 6.4%, respectively, compared to the PTFE/Al jet. The reaction duration of the reactive material is significantly prolonged as the TiH_(2) content increased from 0% to 30%. Finally,combined with the energy release behaviors of PAT material and the dynamic deformation process of liner, the enhancement mechanism of TiH_(2) on energy release of the reactive jet is expounded.
基金supported by the National Natural Science Foundation of China(Grant No.11832006)。
文摘Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows significant differences.However,at present,there are few effective methods for evaluating the energy release characteristics of the middle reaction stage of such explosives,which can have a duration of tens to hundreds of microseconds.The present work demonstrates an approach to assessing the midstage of an aluminized explosive detonation based on a water push test employing a high degree of confinement.In this method,the explosive is contained in a steel cylinder having one end closed that is installed at the bottom of a transparent water tank.Upon detonation,the gaseous products expand in one direction while forcing water ahead of them.The resulting underwater shock wave and the interface between the gas phase products and the water are tracked using an ultra-high-speed framing and streak camera.The shock wave velocity in water and the expansion work performed by the gaseous detonation products were calculated to assess the energy release characteristics of aluminized explosives such as CL-20 and RDX in the middle stage of the detonation reaction.During the middle stage of the detonation process of these aluminized explosives,the aluminum reaction reduced the attenuation of shock waves and increased the work performed by gas phase products.A higher aluminum content increased the energy output while the presence of oxidants slowed the energy release rate.This work demonstrates an effective means of evaluating the performance of aluminized explosives.
基金supported by the National Natural Science Foundation of China (Grant No.22005143)Young Elite Scientists Sponsorship Program by CAST (Grant No.2022QNRC001)。
文摘To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first time.The effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first time.The microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical propellant.Meanwhile,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.
基金This work was supported by the major research projects within the military-international class(JY2021B077).
文摘The laser-guided bomb(LGB)is an air-to-ground pre-cision-guided weapon that offers high hit rates,great power,and ease of use.LGBs are guided by semi-active laser ground-seek-ing technology,which means that atmospheric conditions can affect their accuracy.The spatial release region(SRR)of LGBs is difficult to calculate precisely,especially when there is a poor field of view.This can result in a lower real hit probability.To increase the hit probability of LGBs in tough atmospheric situa-tions,a novel method for calculating the SRR has been pro-posed.This method is based on the transmittance model of the 1.06μm laser in atmospheric species and the laser diffuse reflection model of the target surface to determine the capture target time of the laser seeker.Then,it calculates the boundary ballistic space starting position by ballistic model and gets the spatial scope of the spatial release region.This method can determine the release region of LGBs based on flight test data such as instantaneous velocity,altitude,off-axis angle,and atmospheric visibility.By more effectively employing aircraft release conditions,atmospheric visibility and other factors,the SRR calculation method can improve LGB hit probabi-lity by 9.2%.
基金This work was supported by National Basic Research Program of China(973 Program)(2015CB453303)and International Science and Technology Cooperation Program of China(2013DFA31410)
文摘Enhancement release has been proven effective in natural resources recovery of Chinese shrimp Fenneropenaeus chinensis in the last several decades in China, however, to assess the effectiveness of enhancement release, we still need to develop a high-efficient and easy-operational method to replace those physical-tagging release method with labor intensive, size-and number-limited. In the present study, single(with maternal known) parentage identification using eight simple sequence repeat(SSR) markers genotype fingerprint was used to trace Chinese shrimp released in Bohai Bay in 2013. A total of 884 shrimp spawners were collected from two hatcheries in Tianjin City respectively after enhancement release of shrimp larvae in May 2013. A total of 844 shrimp samples were recaptured around the release location approximately 4 months after the shrimp larvae were released into the natural sea. Genotype data of 8 SSR loci of the 1,726 samples were used for maternal-offspring parentage identification using CEervus 3.0 software. The allele number in each locus ranged from 8 to 68 with an average value of 33.25, which produced the cumulative exclusion probability with one parent known of all these sight loci up to 99%. Among the 844 recaptured shrimp samples, 448(♂:♀=212:232, gender information was lost for 4 samples) were successfully traced to their 337 maternal parents using a logarithm of odds(LOD) > 3.0 threshold. Among these 337 maternal parents, 253 had a single offspring, 62 had two offspring, 18 had three offspring, 3 had four offspring, and 1 had five offspring. For the first time, a large number of released shrimp were identified from recapture samples, and this study showed that it is possible to trace all released Chinese shrimp without using any type of physical tag in enhancement release activities. This not only means more precise recapture ratio assessment than ever expected, but also this method demonstrates an effective method for large-scale hatchery release as well as for organisms used in hatchery enhancement which are not suitable for physical tagging.
基金the Fundamental Research Funds for the Central Universities(No.30920021108)Open Foundation of Hypervelocity Impact Research Center of CARDC(20200106).
文摘Reactive Materials(RMs),a new material with structural and energy release characteristics under shockinduced chemical reactions,are promising in extensive applications in national defense and military fields.They can increase the lethality of warheads due to their dual functionality.This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading.Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs,temperature distribution,peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material(RM)warhead casings by using high-speed camera,infrared thermal imager temperature and peak overpressure testing and scanning electron microscope.Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings.The RM casings can improve the peak overpressure of the air shock wave under explosion loading,though the results are different with different charge ratios.According to the energy release characteristics of the RM,increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave,while reducing the thickness will increase the peak overpressure of the far-field air shock wave.
基金Projects(51974225,51874229,51674188,51904224,51904225,51504182) supported by the National Natural Science Foundation of ChinaProjects(2018JM5161,2018JQ5183,2015JQ5187) supported by the Natural Science Basic Research Plan of Shaanxi,China
文摘It is the basic requirement of the synergetic exploitation of deep mineral resources and geothermal resources to arrange the heat transfer tube in filling body. The heat release performance of filling body directly impacts on the exploiting efficiency of geothermal energy. Based on heat transfer theory, a three-dimensional unsteady heat transfer model of filling body is established by using FLUENT simulation software. Taking the horizontal U-shaped buried pipe as research object, the variation of temperature field in filling body around buried pipe is analyzed during the heat release process of filling body;the initial temperature of filling body, the diameter of buried pipe, the inlet temperature and inlet velocity of heat transfer fluid influencing of coupling heat transfer, which exists between heat transfer fluid and surrounding filling body within a certain axial distance of buried tube, and influencing of temperature difference between inlet and outlet of heat transfer fluid and on heat transfer performance of filling body are also discussed. It not only lays a theoretical foundation for the synergetic exploitation of mineral resources and geothermal energy in deep mines, but also provides a reference basis for the arrangement of buried pipes in filling body as well as the selection of working conditions for heat transfer fluid.
基金Project(U1865203) supported by the Key Projects of the Yalong River Joint Fund of the National Natural Science Foundation of ChinaProject(Z020007) supported by the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of SciencesProjects(41941018, 52109142) supported by the National Natural Science Foundation of China。
文摘Radon is a polluting and radioactive gas released by rock fracture. Shear fracture is widely developed in surrounding rock mass of deep engineering. Nevertheless, the correlation between radon release and the shear fracture is undefined. In this study, the intact Jinping marble and Baihetan basalt were adopted as samples. Based on radionuclide content analysis, the intrinsic characteristics of radon emission were analyzed. Then a direct shear testing system was designed to synchronously measure radon release during rock fracture. The direct shear tests were carried out under different normal stresses. The relationship between shear fracture process and cumulative radon concentration was explored. The results indicated that radon release varied with the increase of shear displacement under the same normal stress. The general pattern showed a slight increase and fell in the initial loading phase, then increased rapidly to the peak release approximately corresponding to the peak of shear stress, and finally decreased to a stable level with the development of shear displacement after sample failure. The initial and peak radon concentrations increased linearly with the increase of normal stress. The same trend was found in shear failure surface area and cumulative radon concentration according to the rise angle(RA) value-average frequency(AF) distribution.
