This paper investigates the effect of microwave irradiation on theβtoαphase transformation of theβ-nucleated isotactic polypropylene(iPP).Ten microwave irradiation cycles was applied to the iPP and iPP modified wit...This paper investigates the effect of microwave irradiation on theβtoαphase transformation of theβ-nucleated isotactic polypropylene(iPP).Ten microwave irradiation cycles was applied to the iPP and iPP modified with 0.3 wt%and 0.5 wt%β-NA,and the data at 2nd,4th,6th,8th and 10th irradiation were reported.As expected,the sample temperature was found to increase with the irradiation time,by more than 130°C,due to high frequency of microwave processing.This was the major factor that induced theβ-phase transformation and structural change.Both the differential scanning calorimetry(DSC)and X-ray diffraction(XRD)results indicated thatβ-phase was mainly transformed toα-phase and partially converted to the amorphous section.It was reflected as 1)the reduction of the enthalpy ofβ-crystal melting(ΔHmβ),2)the increased enthalpy ofα-crystal melting(ΔHmα),3)the decreasedβ-crystalline phase fraction(Kβ)and 4)the decrease of the overall degree of crystallinity(Xall).Under impact force,neat iPP showed a slight increase in the impact strength with the irradiation time,due to the increase of amorphous region.For theβ-iPP,it decreased due to the reduction of theβ-phase content.展开更多
Structure and morphology development during isothermal crystallization and subsequent melting of syndiotactic polypropylene(sPP) was studied by time-resolved simultaneous small-angle X-ray scattering(SAXS) and wide-an...Structure and morphology development during isothermal crystallization and subsequent melting of syndiotactic polypropylene(sPP) was studied by time-resolved simultaneous small-angle X-ray scattering(SAXS) and wide-angle X-ray diffraction(WAXD) methods with synchrotron radiation and differential scanning calorimetry(DSC). The time and temperature dependent parameters such as long period, L , crystal lamellar thickness, l c, amorphous layer thickness, l a, scattering invariant, Q , crystallinity, X c, lateral crystal sizes, L 200 and L 020 , and unit cell parameters a and b were extracted from SAXS and WAXD profiles. Decreasing long period and crystal thickness indicate that thinner secondary crystal lamellae are formed. The decreases in unit cell parameters a and b during isothermal crystallization process suggest that crystal perfection takes place. The changes in the morphological parameters (the invariant, Q , crystallinity, X c, long period, L , and the crystal thickness, l c) during subsequent melting were found to follow a two-stage melting process, corresponding to the dual endotherm behavior in the DSC scan. We conclude that the dual melting peaks are due to the melting of secondary and primary lamellae(first peak) and the subsequent recrystallization-melting process(second peak). Additional minor endothermic peak located at the lowest temperature was also detected and might be related to melting of secondary, thinner and defective lamellae. WAXD showed that during melting, thermal expansion was greater along the b axis than that along the a axis.展开更多
在Visual C++ 6.0开发环境中,利用VB提供的报表控件Crystal Report Active X可实现报表及报表打印功能。其过程是:① 用Crystal Report Pro设计报表;② 在VC中添加Crystal Report Active X控件;③ 双击添加的控件,在属性页中切换到Contr...在Visual C++ 6.0开发环境中,利用VB提供的报表控件Crystal Report Active X可实现报表及报表打印功能。其过程是:① 用Crystal Report Pro设计报表;② 在VC中添加Crystal Report Active X控件;③ 双击添加的控件,在属性页中切换到Control tab并选定报表文件;④ 添加显示打印按钮和消息响应函数;⑤ 使用ODBC与数据库进行连接。展开更多
基金support of iPP resins at IRPC Public Company limited
文摘This paper investigates the effect of microwave irradiation on theβtoαphase transformation of theβ-nucleated isotactic polypropylene(iPP).Ten microwave irradiation cycles was applied to the iPP and iPP modified with 0.3 wt%and 0.5 wt%β-NA,and the data at 2nd,4th,6th,8th and 10th irradiation were reported.As expected,the sample temperature was found to increase with the irradiation time,by more than 130°C,due to high frequency of microwave processing.This was the major factor that induced theβ-phase transformation and structural change.Both the differential scanning calorimetry(DSC)and X-ray diffraction(XRD)results indicated thatβ-phase was mainly transformed toα-phase and partially converted to the amorphous section.It was reflected as 1)the reduction of the enthalpy ofβ-crystal melting(ΔHmβ),2)the increased enthalpy ofα-crystal melting(ΔHmα),3)the decreasedβ-crystalline phase fraction(Kβ)and 4)the decrease of the overall degree of crystallinity(Xall).Under impact force,neat iPP showed a slight increase in the impact strength with the irradiation time,due to the increase of amorphous region.For theβ-iPP,it decreased due to the reduction of theβ-phase content.
文摘Structure and morphology development during isothermal crystallization and subsequent melting of syndiotactic polypropylene(sPP) was studied by time-resolved simultaneous small-angle X-ray scattering(SAXS) and wide-angle X-ray diffraction(WAXD) methods with synchrotron radiation and differential scanning calorimetry(DSC). The time and temperature dependent parameters such as long period, L , crystal lamellar thickness, l c, amorphous layer thickness, l a, scattering invariant, Q , crystallinity, X c, lateral crystal sizes, L 200 and L 020 , and unit cell parameters a and b were extracted from SAXS and WAXD profiles. Decreasing long period and crystal thickness indicate that thinner secondary crystal lamellae are formed. The decreases in unit cell parameters a and b during isothermal crystallization process suggest that crystal perfection takes place. The changes in the morphological parameters (the invariant, Q , crystallinity, X c, long period, L , and the crystal thickness, l c) during subsequent melting were found to follow a two-stage melting process, corresponding to the dual endotherm behavior in the DSC scan. We conclude that the dual melting peaks are due to the melting of secondary and primary lamellae(first peak) and the subsequent recrystallization-melting process(second peak). Additional minor endothermic peak located at the lowest temperature was also detected and might be related to melting of secondary, thinner and defective lamellae. WAXD showed that during melting, thermal expansion was greater along the b axis than that along the a axis.
