A failure criterion fully considering the anisotropy and hydration of shale is essential for shale formation stability evaluation.Thus,a novel failure criterion for hydration shale is developed by using Jaeger’s shea...A failure criterion fully considering the anisotropy and hydration of shale is essential for shale formation stability evaluation.Thus,a novel failure criterion for hydration shale is developed by using Jaeger’s shear failure criterion to describe the anisotropy and using the shear strength reduction caused by clay minerals hydration to evaluate the hydration.This failure criterion is defined with four parameters in Jaeger’s shear failure criterion(S_(1),S_(2),a andφ),three hydration parameters(k,ω_(sh)andσ_(s))and two material size parameters(d and l0).The physical meanings and determining procedures of these parameters are described.The accuracy and applicability of this failure criterion are examined using the published experimental data,showing a cohesive agreement between the predicted values and the testing results,R^(2)=0.916 and AAREP(average absolute relative error percentage)of 9.260%.The error(|D_(p)|)is then discussed considering the effects ofβ(angle between bedding plane versus axial loading),moisture content and confining pressure,presenting that|Dp|increases whenβis closer to 30°,and|D_(p)|decreases with decreasing moisture content and with increasing confining pressure.Moreover,|D_(p)|is demonstrated as being sensitive to S1and being steady with decrease in the data set whenβis 0°,30°,45°and 90°.展开更多
A fully grouted bolt provides greater shear load capacity for transmitting the load from the rock to the bolt, and vice versa. When grout fills irregularities between the bolt and the rock, a keying effect is created ...A fully grouted bolt provides greater shear load capacity for transmitting the load from the rock to the bolt, and vice versa. When grout fills irregularities between the bolt and the rock, a keying effect is created to transfer the load to the bolt via shear resistance at the interface and within the grout. Previous research has revealed that the mechanical properties of the grout had a great impact on the load transfer capacity of the rock bolting system. This paper presents a method to enhance the rock bolting strength by introducing metal granules into the grouting material. Experimental results suggest that both the average peak load of pullout tests and the total energy absorption of the system will increase if some metal granules are mixed into the resin.展开更多
We studied variations in the stress field around guide holes drilled during tunnel excavation to understand the mechanical mechanism by which these holes help prevent rockburst.The study used elasto-plastic analysis o...We studied variations in the stress field around guide holes drilled during tunnel excavation to understand the mechanical mechanism by which these holes help prevent rockburst.The study used elasto-plastic analysis of a circular chamber under non-axisymmetrical loads.The results showed that the unloading of in-situ stresses, and the forming of a secondary stress field, leads to a severe change in the stress field around the guide holes.This causes the formation of an X-shaped area of plastic deformation, which prevents the rockburst.Adopting a sub-model finite element technique, we analyzed the factors that influence the distribution of the plastic area, such as the guide hole distribution and the in-situ stress state.The calculations showed that higher initial stresses result in greater adjustment to the stress field.When the stress concentration is greater the size of the plastic area surrounding the guide hole is larger.A multi-row distribution of the guide holes shaped like a quincunx can increase the interconnectivity of the plastic areas and allow the plastic area to extend from the tunnel wall deep into the surrounding rock.An optimized design was put forward based on the distribution of the plastic area around guide holes and the factors that influence it.展开更多
Research on the expansion and fracture of explosively driven metal shells has been a key issue in weapon development and structural protection.It is important to study and predict the failure mode,fracture mechanism,a...Research on the expansion and fracture of explosively driven metal shells has been a key issue in weapon development and structural protection.It is important to study and predict the failure mode,fracture mechanism,and fragment distribution characteristics of explosively driven metal shells.In this study,we used the finite element-smoothed particle hydrodynamics(FE-SPH)adaptive method and the fluid-structure interaction method to perform a three-dimensional numerical simulation of the expansion and fracture of a metal cylindrical shell.Our method combined the advantages of the FEM and SPH,avoiding system mass loss,energy loss,and element distortion;in addition,the proposed method had a good simulation effect on the interaction between detonation waves and the cylindrical shell.The simulated detonation wave propagation,shell damage morphology,and fragment velocity distribution were in good agreement with theoretical and experimental results.We divided the fragments into three regions based on their shape characteristics.We analyzed the failure mode and formation process of fragments in different regions.The numerical results reproduced the phenomenon in which cracks initiated from the inner surface and extended to the outer surface of the cylindrical shell along the 45°or 135°shear direction.In addition,fragments composed of elements are identified,and the mass and characteristic lengths of typical fragments at a stable time are provided.Furthermore,the mass and size distribution characteristics of the fragments were explored,and the variation in the fitting results of the classical distribution function under different explosion pressures was examined.Finally,based on mathematical derivation,the distribution formula of fragment velocity was improved.The improved formula provided higher accuracy and could be used to analyze any metal cylindrical shells with different length-to-diameter ratios.展开更多
Starting friction would be induced and preserved somewhere along the seabed route of cased insulated flowlines（CIF） when the pipe carries service loads.The axial pipe-soil interaction can be divided into three pipe ...Starting friction would be induced and preserved somewhere along the seabed route of cased insulated flowlines（CIF） when the pipe carries service loads.The axial pipe-soil interaction can be divided into three pipe sections：the sliding section,the fixed section and the starting friction section.Although limited to a relatively small length of the pipe,the pipe coats of the starting friction section would suffer much higher shear force caused by thermal expansion than those of the sliding section or the fixed section.Based on the axial equilibrium equation of this kind of insulated pipeline,we developed a method for checking the shear force on CIF coats and their interfaces.The typical example shows that starting friction effect should be taken into account when checking the lap shear strength of heatshrinkable sleeves on CIF field joints.展开更多
Two single-storey single-span reinforcement concrete （RC） frame structures strengthened with Y-eccentrically brace were designed and manufactured to be 1/3 scale. The pseudo-dynamic testing method was used to study ...Two single-storey single-span reinforcement concrete （RC） frame structures strengthened with Y-eccentrically brace were designed and manufactured to be 1/3 scale. The pseudo-dynamic testing method was used to study the mechanical characteristics and the seismic performance under E1-Centro earthquake action with different peak acceleration adjusted by China＇s Code for Seismic Design of Buildings. The test results indicate that RC frame structures strengthened with Y- eccentrically steel brace present perfect seismic performance under strong earthquake action owing to the good ductility, strong bearing capability and fine energy absorbing capability provided by energy dissipation element and high lateral stiffness provided by diagonal braces. The seismic performance is also affected by the length of outsourcing steel at the joint between energy dissipation element of eccentric steel brace and RC frame beam. The joint should be considerably designed to make sure that shear failure can firstly occur in energy dissipation element.展开更多
基金The financial supports from the Sichuan Science and Technology Program(No.2022NSFSC0185)the National Natural Science Foundation of China(Nos.42172313 and 51774246)+3 种基金the Natural Science Foundation of Chongqing(No.cstc2020jcyj-msxm X0570)the Fundamental Research Funds for the Central Universities(Nos.2020CDJ-LHZZ-004,2020CDJQY-A046)the State Key Laboratory of Coal Mine Disaster Dynamics and Control(No.2011DA105287-MS201903)The scholarship supports provided by the China Scholarship Council(CSC)。
文摘A failure criterion fully considering the anisotropy and hydration of shale is essential for shale formation stability evaluation.Thus,a novel failure criterion for hydration shale is developed by using Jaeger’s shear failure criterion to describe the anisotropy and using the shear strength reduction caused by clay minerals hydration to evaluate the hydration.This failure criterion is defined with four parameters in Jaeger’s shear failure criterion(S_(1),S_(2),a andφ),three hydration parameters(k,ω_(sh)andσ_(s))and two material size parameters(d and l0).The physical meanings and determining procedures of these parameters are described.The accuracy and applicability of this failure criterion are examined using the published experimental data,showing a cohesive agreement between the predicted values and the testing results,R^(2)=0.916 and AAREP(average absolute relative error percentage)of 9.260%.The error(|D_(p)|)is then discussed considering the effects ofβ(angle between bedding plane versus axial loading),moisture content and confining pressure,presenting that|Dp|increases whenβis closer to 30°,and|D_(p)|decreases with decreasing moisture content and with increasing confining pressure.Moreover,|D_(p)|is demonstrated as being sensitive to S1and being steady with decrease in the data set whenβis 0°,30°,45°and 90°.
文摘A fully grouted bolt provides greater shear load capacity for transmitting the load from the rock to the bolt, and vice versa. When grout fills irregularities between the bolt and the rock, a keying effect is created to transfer the load to the bolt via shear resistance at the interface and within the grout. Previous research has revealed that the mechanical properties of the grout had a great impact on the load transfer capacity of the rock bolting system. This paper presents a method to enhance the rock bolting strength by introducing metal granules into the grouting material. Experimental results suggest that both the average peak load of pullout tests and the total energy absorption of the system will increase if some metal granules are mixed into the resin.
基金Projects 50725931 supported by the National Science Fund for Distinguished Young Scholars50779050 and 50639100 by the National Natural Science Foundation of China
文摘We studied variations in the stress field around guide holes drilled during tunnel excavation to understand the mechanical mechanism by which these holes help prevent rockburst.The study used elasto-plastic analysis of a circular chamber under non-axisymmetrical loads.The results showed that the unloading of in-situ stresses, and the forming of a secondary stress field, leads to a severe change in the stress field around the guide holes.This causes the formation of an X-shaped area of plastic deformation, which prevents the rockburst.Adopting a sub-model finite element technique, we analyzed the factors that influence the distribution of the plastic area, such as the guide hole distribution and the in-situ stress state.The calculations showed that higher initial stresses result in greater adjustment to the stress field.When the stress concentration is greater the size of the plastic area surrounding the guide hole is larger.A multi-row distribution of the guide holes shaped like a quincunx can increase the interconnectivity of the plastic areas and allow the plastic area to extend from the tunnel wall deep into the surrounding rock.An optimized design was put forward based on the distribution of the plastic area around guide holes and the factors that influence it.
基金supported by the National Natural Science Foundation of China(Grant No.11872118,11627901)。
文摘Research on the expansion and fracture of explosively driven metal shells has been a key issue in weapon development and structural protection.It is important to study and predict the failure mode,fracture mechanism,and fragment distribution characteristics of explosively driven metal shells.In this study,we used the finite element-smoothed particle hydrodynamics(FE-SPH)adaptive method and the fluid-structure interaction method to perform a three-dimensional numerical simulation of the expansion and fracture of a metal cylindrical shell.Our method combined the advantages of the FEM and SPH,avoiding system mass loss,energy loss,and element distortion;in addition,the proposed method had a good simulation effect on the interaction between detonation waves and the cylindrical shell.The simulated detonation wave propagation,shell damage morphology,and fragment velocity distribution were in good agreement with theoretical and experimental results.We divided the fragments into three regions based on their shape characteristics.We analyzed the failure mode and formation process of fragments in different regions.The numerical results reproduced the phenomenon in which cracks initiated from the inner surface and extended to the outer surface of the cylindrical shell along the 45°or 135°shear direction.In addition,fragments composed of elements are identified,and the mass and characteristic lengths of typical fragments at a stable time are provided.Furthermore,the mass and size distribution characteristics of the fragments were explored,and the variation in the fitting results of the classical distribution function under different explosion pressures was examined.Finally,based on mathematical derivation,the distribution formula of fragment velocity was improved.The improved formula provided higher accuracy and could be used to analyze any metal cylindrical shells with different length-to-diameter ratios.
文摘Starting friction would be induced and preserved somewhere along the seabed route of cased insulated flowlines（CIF） when the pipe carries service loads.The axial pipe-soil interaction can be divided into three pipe sections：the sliding section,the fixed section and the starting friction section.Although limited to a relatively small length of the pipe,the pipe coats of the starting friction section would suffer much higher shear force caused by thermal expansion than those of the sliding section or the fixed section.Based on the axial equilibrium equation of this kind of insulated pipeline,we developed a method for checking the shear force on CIF coats and their interfaces.The typical example shows that starting friction effect should be taken into account when checking the lap shear strength of heatshrinkable sleeves on CIF field joints.
基金Funded by National Natural Science Foundation of China (Grant No. 51078248)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘Two single-storey single-span reinforcement concrete （RC） frame structures strengthened with Y-eccentrically brace were designed and manufactured to be 1/3 scale. The pseudo-dynamic testing method was used to study the mechanical characteristics and the seismic performance under E1-Centro earthquake action with different peak acceleration adjusted by China＇s Code for Seismic Design of Buildings. The test results indicate that RC frame structures strengthened with Y- eccentrically steel brace present perfect seismic performance under strong earthquake action owing to the good ductility, strong bearing capability and fine energy absorbing capability provided by energy dissipation element and high lateral stiffness provided by diagonal braces. The seismic performance is also affected by the length of outsourcing steel at the joint between energy dissipation element of eccentric steel brace and RC frame beam. The joint should be considerably designed to make sure that shear failure can firstly occur in energy dissipation element.
