The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation resul...The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation results with the experimental results,the correctness of the calculation and the statistical method of momentum transfer coefficient is verified.Different shapes of aluminum,copper and heavy tungsten alloy projectiles striking aluminum,basalt,and pumice target for impacts up to 10 km/s are simulated.The influence mechanism of the shape of the projectile and projectile/target density on the momentum transfer was obtained.With an increase in projectile density and length-diameter ratio,the energy transfer time between the projectile and targets is prolonged.The projectile decelerates slowly,resulting in a larger cratering depth.The energy consumed by the projectile in the excavation stage increased,resulting in lower mass-velocity of ejecta and momentum transfer coefficient.The numerical simulation results demonstrated that for different projectile/target combinations,the higher the wave impedance of the projectile,the higher the initial phase transition velocity and the smaller the mass of phase transition.The results can provide theoretical guidance for kinetic impactor design and material selection.展开更多
The melting points of ionic liquids(ILs)reported since 2020 were surveyed,collected,and reviewed,which were further combined with the previous data to provide a database with 3129 ILs ranging from 177.15 to 645.9 K in...The melting points of ionic liquids(ILs)reported since 2020 were surveyed,collected,and reviewed,which were further combined with the previous data to provide a database with 3129 ILs ranging from 177.15 to 645.9 K in melting points.In addition,the factors that affect the melting point of ILs from macro,micro,and thermodynamic perspectives were summarized and analyzed.Then the development of the quantitative structure-property relationship(QSPR),group contribution method(GCM),and conductor-like screening model for realistic solvents(COSMO-RS)for predicting the melting points of ILs were reviewed and further analyzed.Combined with the evaluation together with the preliminary study conducted in this work,it shows that COSMO-RS is more promising and possible to further improve its performance,and a framework was thus proposed.展开更多
Boron phosphide(BP)has gained significant research attention due to its unique photoelectric and mechanical properties.In this work,we investigated the stability of BP under high pressure using x-ray diffraction and s...Boron phosphide(BP)has gained significant research attention due to its unique photoelectric and mechanical properties.In this work,we investigated the stability of BP under high pressure using x-ray diffraction and scanning electron microscope.The phase diagram of BP was explored in both B-rich and P-rich environments,revealing crucial insight into its behavior at 5.0 GPa.Additionally,we measured the melting curve of BP from 8.0 GPa to 15.0 GPa.Our findings indicate that the stability of BP under high pressure is improved within B-rich and P-rich environments.Furthermore,we report a remarkable observation of melting curve frustration at 10.0 GPa.This study will enhance our understanding of stability of BP under high pressure,shedding light on its potential application in semiconductor,thermal,and light-transmitting devices.展开更多
Aim To investigate the melting behavior of polyamide 6 in polyamide 6/polyethy lene blends crystallized from amorphous state. Methods DSC was used to test effects of annealing temperature, annealing time, DS...Aim To investigate the melting behavior of polyamide 6 in polyamide 6/polyethy lene blends crystallized from amorphous state. Methods DSC was used to test effects of annealing temperature, annealing time, DSC scan rate, and the step wise annealing on the melting peaks of the ice water quenched specimens. Results and Conclusion Varied melting peaks of PA6 component were obtained. The degree of perfection and the crystallization degree of PA6 crystals decreased in the blends, and the crystallization degree of PA6 increased with the increasing of the annealing time. The height of the upper melting peak of reference PA6 is higher than that in blends.展开更多
Two-dimensional(2D)melting is a fundamental research topic in condensed matter physics,which can also provide guidance on fabricating new functional materials.Nevertheless,our understanding of 2D melting is still far ...Two-dimensional(2D)melting is a fundamental research topic in condensed matter physics,which can also provide guidance on fabricating new functional materials.Nevertheless,our understanding of 2D melting is still far from being complete due to existence of possible complicate transition mechanisms and absence of effective analysis methods.Here,using Monte Carlo simulations,we investigate 2D melting of 60°rhombs which melt from two different surface-fullycoverable crystals,a complex hexagonal crystal(cHX)whose primitive cell contains three rhombs,and a simple rhombic crystal(RB)whose primitive cell contains one rhomb.The melting of both crystals shows a sequence of solid,hexatic in molecular orientation(Hmo),and isotropic phases which obey the Berezinskii-Kosterlitz-Thouless-Halperin-Nelson-Young(BKTHNY)theory.However,local polymorphic configuration(LPC)based analysis reveals different melting mechanisms:the cHX-Hmotransition is driven by the proliferation of point-like defects during which defect-associated LPCs are generated sequentially,whereas the RB-Hmotransition is driven by line defects where defect-associated LPCs are generated simultaneously.These differences result in the observed different solid-Hmotransition points which areφA=0.812 for the cHX-HmoandφA=0.828 for the RB-Hmo.Our work will shed light on the initial-crystal-dependence of 2D melting behavior.展开更多
A Fourier Transform Infrared Spectroscopic(FTIR)method involving a Fe2O3 flux was used to learn how China's coal ash melts.The relationship between ash fusion temperature and chemical composition,as well as the ef...A Fourier Transform Infrared Spectroscopic(FTIR)method involving a Fe2O3 flux was used to learn how China's coal ash melts.The relationship between ash fusion temperature and chemical composition,as well as the effects of Fe2O3 flux on the ash fusion temperature were studied.The relationship between ash fusion temperature and chemical composition,mineralogical phases and functional groups was analyzed with the FTIR method.The results show that the ash fusion temperature is related to the location and transmittance of certain absorption peaks,which is of great significance for the study of ash behavior.展开更多
Ag/SnO2,as a promising and environment-friendly electrical contact material,is widely applied in low-voltage apparatus.But the properties of Ag/SnO2 composites is difficult to improve due to the poor distribution phas...Ag/SnO2,as a promising and environment-friendly electrical contact material,is widely applied in low-voltage apparatus.But the properties of Ag/SnO2 composites is difficult to improve due to the poor distribution phases and difficult component design.In this work,the Ag/SnO2 composites are prepared by selective laser melting.To get better performance,Ag/SnO2 composites with different energy density were studied.The microstructure was observed by field emission scanning electron microscope.In addition,reinforced SnO2 phase was characterized by X-ray diffraction and transmission electron microscope.The results indicated that the microstructure,relative density and hardness of are influenced by energy density,while Ag/SnO2 composites with homogeneous microstructure,high relative density,higher hardness and lower electrical resistivity can be obtained by proper energy density(E?68 J/mm^3).展开更多
One of the bottleneck issues for commercial scale-up of Ti additive manufacturing lies in high cost of raw material, i.e. the spherical Ti powder that is often made by gas atomization. In this study, we address this s...One of the bottleneck issues for commercial scale-up of Ti additive manufacturing lies in high cost of raw material, i.e. the spherical Ti powder that is often made by gas atomization. In this study, we address this significant issue by way of powder modification & ball milling processing, which shows that it is possible to produce printable Ti powders based on ultra- low cost, originally unprintable hydrogenation-dehydrogenation (HDH) Ti powder. It is also presented that the as-printed Ti using the modified powder exhibits outstanding mechanical properties, showing a combination of excellent fracture strength (~895 MPa) and high ductility (~19.0% elongation).展开更多
Municipal solid waste incinerator （MSWI） fly ash was melted using a set of direct current （DC） arc plasma furnace system for the first time in China. At a feed-rate of flying ash of 80 kg/h, the temperature at the...Municipal solid waste incinerator （MSWI） fly ash was melted using a set of direct current （DC） arc plasma furnace system for the first time in China. At a feed-rate of flying ash of 80 kg/h, the temperature at the gas outlet was above 1300℃. Dioxins in the off-gas were recorded as 0.029 ng I-TEQ/Nma （international toxic equivalent, I-TEQ）, well below 0.5 ngTEQ/Nm^3（toxic equivalent, TEQ）, while those in the melted product （slag） were 0.00035 ng/g I-TEQ. Molten slag from the furnace showed excellent resistance against the leaching of heavy metals. These results prove that the plasma furnace is effective for the detoxification and stabilization of MSWI fly ash.展开更多
Asymmetric plate impact experiments are conducted on LY12 aluminium alloy in a pressure range of 85-131 GPa. The longitudinal sound speeds axe obtained from the time-resolved particle speed profiles of the specimen me...Asymmetric plate impact experiments are conducted on LY12 aluminium alloy in a pressure range of 85-131 GPa. The longitudinal sound speeds axe obtained from the time-resolved particle speed profiles of the specimen measured with Velocity Interferometer System for Any Reflector （VISAR） technique, and they are shown to be good agreement with our previously reported data of this alloy in a pressure range of 20-70 GPa, and also with those of 2024 aluminium reported by McQueen. Using all of the longitudinal speeds and the corresponding bulk speeds calculated from the Gruneisen equation of state （EOS）, shear moduli of LY12 aluminium alloy are obtained. A comparison of the shear moduli in the solid phase region with those estimated from the Steinberg model demonstrate that the latter are systematically lower than the measurements. By re-analysing the pressure effect on the shear modulus, a modified equation is proposed, in which the pressure term of P/η^1/3 in the Steinberg model is replaced by a linear term. Good agreement between experiments and the modified equation is obtained, which implies that the shear modulus of LY12 aluminium varies linearly both with pressure and with temperature throughout the whole solid phase region. On the other hand, shear modulus of aluminium in a solid-liquid mixed phrase region decreases gradually and smoothly, a feature that is very different from the drastic dropping at the melting point under static conditions.展开更多
The Lie group method is applied to present an analysis of the magneto hydro-dynamics（MHD） steady laminar flow and the heat transfer from a warm laminar liquid flow to a melting moving surface in the presence of ther...The Lie group method is applied to present an analysis of the magneto hydro-dynamics（MHD） steady laminar flow and the heat transfer from a warm laminar liquid flow to a melting moving surface in the presence of thermal radiation.By using the Lie group method,we have presented the transformation groups for the problem apart from the scaling group.The application of this method reduces the partial differential equations（PDEs） with their boundary conditions governing the flow and heat transfer to a system of nonlinear ordinary differential equations（ODEs） with appropriate boundary conditions.The resulting nonlinear system of ODEs is solved numerically using the implicit finite difference method（FDM）.The local skin-friction coefficients and the local Nusselt numbers for different physical parameters are presented in a table.展开更多
The melting of crystals is one of the most common and general phase transition phenomena.However, the mechanism of crystal melting is not well understood, and more experimental measurements and explorations are still ...The melting of crystals is one of the most common and general phase transition phenomena.However, the mechanism of crystal melting is not well understood, and more experimental measurements and explorations are still needed.The mechanical spectra of propylene carbonate and 1,3-propanediol during the crystal melting processes are measured by the reed vibration mechanical spectroscopy for liquids(RMS-L) for the first time.The experimental results show that as the temperature increases, the real part of the complex Young modulus first decreases slowly, and then quickly drops to zero;meanwhile, its imaginary part increases slowly at first, then goes up and drops quickly to zero, showing a peak of internal friction.Preliminary analyses indicate that both the real and imaginary parts can present some characteristics of the melting process, such as the transition from the disconnected liquid regions to the connected liquid regions, that from the connected crystal regions to the disconnected crystal regions, and so on.In addition, the results show that the melting rate per unit volume of crystalline phase versus temperature satisfies the Arrhenius relation at the initial stage of melting, and deviates from this relation as the temperature increases to a certain value.Therefore, the RMS-L will provide an effective supplement for the further study of melting.展开更多
WC-Co reinforced C276 alloy composite coatings are fabricated on Q235 steel by laser melting deposition.The microstructure,hardness,wear performance,and electrochemical corrosion behavior of composite coating are stud...WC-Co reinforced C276 alloy composite coatings are fabricated on Q235 steel by laser melting deposition.The microstructure,hardness,wear performance,and electrochemical corrosion behavior of composite coating are studied.The results show that WC-Co particles are mostly uniformly distributed in the coating and provide favorable conditions for heterogeneous nucleation.The microstructure of C276/WC-Co composite coatings is composed of γ-Ni solid solution dendrites and MoNi solid solution eutectics.The WC-Co particles can effectively improve the hardness and wear resistance of C276 alloy.The average hardness of the composite coating containing 10-wt% WC-Co(447 HV_(0.2)) are 1.26 times higher than that of the C276 alloy(356 HV_(0.2)).The wear rate of composite coating containing 10-wt% WC-Co(6.95 ×10^(-3) mg/m) is just 3.5% of that of C276 coating(196.23 × 10^(-3) mg/m).However,comparing with Hastelloy C276,the corrosion resistance of C276/WC-Co composite coating decreases.展开更多
Thermally stable nano-size ceramic particles are the preferred reinforcements for superalloys as they improve the alloys'microstructural stability and high-temperature properties.In this work,very dense and crack-...Thermally stable nano-size ceramic particles are the preferred reinforcements for superalloys as they improve the alloys'microstructural stability and high-temperature properties.In this work,very dense and crack-free carbidereinforced GTD222(nickel-based superalloy)composites were prepared via selective laser melting(SLM).The distribution of TiC nanoparticles presents a three-dimensional(3D)network structure in the SLMed TiC/GTD222 composite.Mechanical testing revealed that the SLMed TiC/GTD222 composite has superior strength(UTS?1320 MPa,YS?1100 MPa)compared to the SLMed GTD222 superalloy.The GTD22 alloy reinforced with carbide nanoparticles’distinctive microstructure and its excellent mechanical properties for is discussed.展开更多
The mixed-valent Pb3Rh7O15 undergoes a Verwey-type transition at Tv≈180K, below which the development of Rh3＋3＋/Rh4＋4＋ charge order induces an abrupt conductor-to-insulator transition in resistivity. Here we inve...The mixed-valent Pb3Rh7O15 undergoes a Verwey-type transition at Tv≈180K, below which the development of Rh3＋3＋/Rh4＋4＋ charge order induces an abrupt conductor-to-insulator transition in resistivity. Here we investigate the effect of pressure on the Verwey-type transition of Pb3Rh7O15 by measuring its electrical resistivity under hydrostatic pressures up to 8GPa with a cubic anvil cell apparatus. We find that the application of high pressure can suppress the Verwey-type transition around 3GPa, above which a metallic state is realized at temperatures below ～70K, suggesting the melting of charge order by pressure. Interestingly, the low-temperature metallic region shrinks gradually upon further increasing pressure and disappears completely at P〉7GPa, which indicates that the charge carriers in Pb3Rh7O15 undergo a reentrant localization under higher pressures. We have constructed a temperature-pressure phase diagram for Pb3Rh7O15 and compared to that of Fe3O4, showing an archetype Verwey transition.展开更多
Fly ash from a municipal solid waste incinerator （MSWI） without preprocessing （original fly ash, OFA） was melted by a direct current （DC） plasma arc furnace to investigate how the feed forms governed the results...Fly ash from a municipal solid waste incinerator （MSWI） without preprocessing （original fly ash, OFA） was melted by a direct current （DC） plasma arc furnace to investigate how the feed forms governed the results. Dioxins in flue gas from stack and bag-filter ash （BFA） were detected. The distribution of heavy metals of Pb, Cd, As, and Cr along the flue gas process system was analyzed. Through a comparison of the results for dioxins and heavy metals in this study and previous work, carrying-over of fly ash particles with the flue gas stream can be deduced. Based on the magnetic induction equation and Navier-Stokes equations, a magnetohydrodynamic （MHD） model for the plasma arc was developed to describe the particle-carrying effect. The results indicate that, a. when melted, the feed forms of MSWI fly ash affect the results significantly; b. it is not preferable to melt MSWI fly ash directly, and efforts should be made to limit the mass transfer of OFA from the plasma furnace.展开更多
The classical molecular dynamics simulations in canonical NVT ensemble conditions are used to investigate the melting transition in different heating rates of Pt-Ag-Au ternary nanoalloys.In order to obtain the initial...The classical molecular dynamics simulations in canonical NVT ensemble conditions are used to investigate the melting transition in different heating rates of Pt-Ag-Au ternary nanoalloys.In order to obtain the initial configurations used in the molecular dynamics simulations,optimizing the chemical ordering of Pt_(13)AgnAu_(42−n)(n=0-42)ternary nanoalloys was performed using the Basin-Hopping algorithm which would not allow changes in the icosahedron structure.The Gupta many-body potential was used to model interatomic interactions in both molecular dynamics simulations and optimization simulations.The melting transitions of selected Pt-Ag-Au nanoalloys were explored using caloric curves and Lindemann parameters.There have been two identified types of melting mechanisms,one includes sudden jump behavior in the caloric curve and the other is an isomerization while melting transition.The temperature range in which the isomerization takes place depends on the heating rate value.展开更多
The melting curve of Sn has been calculated using the dislocation-mediated melting model with the‘zone-linking method＇.The results are in good agreement with the experimental data.According to our calculation,the me...The melting curve of Sn has been calculated using the dislocation-mediated melting model with the‘zone-linking method＇.The results are in good agreement with the experimental data.According to our calculation,the melting temperature of γ-Sn at zero pressure is about 436 K obtained by the extrapolation of the method from the triple point of Sn.The results show that this calculation method is better than other theoretical methods for predicting the melting curve of polymorphic material Sn.展开更多
The thermal stability of Ti@A1 core/shell nanoparticles with different sizes and components during continuous heating and cooling processes is examined by a molecular dynamics simulation with embedded atom method. The...The thermal stability of Ti@A1 core/shell nanoparticles with different sizes and components during continuous heating and cooling processes is examined by a molecular dynamics simulation with embedded atom method. The thermodynamic properties and structure evolution during continuous heating and cooling processes are investigated through the character- ization of the potential energy, specific heat distribution, and radial distribution function （RDF）. Our study shows that, for fixed Ti core size, the melting temperature decreases with A1 shell thickness, while the crystallizing temperature and glass formation temperature increase with A1 shell thickness. Diverse melting mechanisms have been discovered for different Ti core sized with fixed A1 shell thickness nanoparticles. The melting temperature increases with the Ti core radius. The trend agrees well with the theoretical phase diagram of bimetallic nanoparticles. In addition, the glass phase formation of A1-Ti nanoparticles for the fast cooling rate of 12 K/ps, and the crystal phase formation for the low cooling rate of 0.15 K/ps. The icosahedron structure is formed in the frozen 4366 A1-Ti atoms for the low cooling rate.展开更多
Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic forc...Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.展开更多
基金the National Natural Science Foundation of China(Grant Nos.62227901,12202068)the Civil Aerospace Pre-research Project(Grant No.D020304).
文摘The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation results with the experimental results,the correctness of the calculation and the statistical method of momentum transfer coefficient is verified.Different shapes of aluminum,copper and heavy tungsten alloy projectiles striking aluminum,basalt,and pumice target for impacts up to 10 km/s are simulated.The influence mechanism of the shape of the projectile and projectile/target density on the momentum transfer was obtained.With an increase in projectile density and length-diameter ratio,the energy transfer time between the projectile and targets is prolonged.The projectile decelerates slowly,resulting in a larger cratering depth.The energy consumed by the projectile in the excavation stage increased,resulting in lower mass-velocity of ejecta and momentum transfer coefficient.The numerical simulation results demonstrated that for different projectile/target combinations,the higher the wave impedance of the projectile,the higher the initial phase transition velocity and the smaller the mass of phase transition.The results can provide theoretical guidance for kinetic impactor design and material selection.
基金the financial support from National Natural Science Foundation of China(No.21838004,22011530112)China ScholarshipCouncil(No.202208320253)+2 种基金STINT(CH2019-8287)the Swedish Research Councilthe financial support from Horizon-EIC,Pathfinder challenges,Grant Number:101070976.
文摘The melting points of ionic liquids(ILs)reported since 2020 were surveyed,collected,and reviewed,which were further combined with the previous data to provide a database with 3129 ILs ranging from 177.15 to 645.9 K in melting points.In addition,the factors that affect the melting point of ILs from macro,micro,and thermodynamic perspectives were summarized and analyzed.Then the development of the quantitative structure-property relationship(QSPR),group contribution method(GCM),and conductor-like screening model for realistic solvents(COSMO-RS)for predicting the melting points of ILs were reviewed and further analyzed.Combined with the evaluation together with the preliminary study conducted in this work,it shows that COSMO-RS is more promising and possible to further improve its performance,and a framework was thus proposed.
基金Project supported by the National Natural Science Foundation of China (Grant No.12074273)the Sichuan Science and Technology Program (Grant No.2022NSFSC1810)。
文摘Boron phosphide(BP)has gained significant research attention due to its unique photoelectric and mechanical properties.In this work,we investigated the stability of BP under high pressure using x-ray diffraction and scanning electron microscope.The phase diagram of BP was explored in both B-rich and P-rich environments,revealing crucial insight into its behavior at 5.0 GPa.Additionally,we measured the melting curve of BP from 8.0 GPa to 15.0 GPa.Our findings indicate that the stability of BP under high pressure is improved within B-rich and P-rich environments.Furthermore,we report a remarkable observation of melting curve frustration at 10.0 GPa.This study will enhance our understanding of stability of BP under high pressure,shedding light on its potential application in semiconductor,thermal,and light-transmitting devices.
文摘Aim To investigate the melting behavior of polyamide 6 in polyamide 6/polyethy lene blends crystallized from amorphous state. Methods DSC was used to test effects of annealing temperature, annealing time, DSC scan rate, and the step wise annealing on the melting peaks of the ice water quenched specimens. Results and Conclusion Varied melting peaks of PA6 component were obtained. The degree of perfection and the crystallization degree of PA6 crystals decreased in the blends, and the crystallization degree of PA6 increased with the increasing of the annealing time. The height of the upper melting peak of reference PA6 is higher than that in blends.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11874277,21621004,12104453,and 12090054)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB33030300)
文摘Two-dimensional(2D)melting is a fundamental research topic in condensed matter physics,which can also provide guidance on fabricating new functional materials.Nevertheless,our understanding of 2D melting is still far from being complete due to existence of possible complicate transition mechanisms and absence of effective analysis methods.Here,using Monte Carlo simulations,we investigate 2D melting of 60°rhombs which melt from two different surface-fullycoverable crystals,a complex hexagonal crystal(cHX)whose primitive cell contains three rhombs,and a simple rhombic crystal(RB)whose primitive cell contains one rhomb.The melting of both crystals shows a sequence of solid,hexatic in molecular orientation(Hmo),and isotropic phases which obey the Berezinskii-Kosterlitz-Thouless-Halperin-Nelson-Young(BKTHNY)theory.However,local polymorphic configuration(LPC)based analysis reveals different melting mechanisms:the cHX-Hmotransition is driven by the proliferation of point-like defects during which defect-associated LPCs are generated sequentially,whereas the RB-Hmotransition is driven by line defects where defect-associated LPCs are generated simultaneously.These differences result in the observed different solid-Hmotransition points which areφA=0.812 for the cHX-HmoandφA=0.828 for the RB-Hmo.Our work will shed light on the initial-crystal-dependence of 2D melting behavior.
基金Projects 2003001 supported by the Key Project of Huainan City405099 by the Project of Science Research and Development of China Petroleum & Chemical Corporation
文摘A Fourier Transform Infrared Spectroscopic(FTIR)method involving a Fe2O3 flux was used to learn how China's coal ash melts.The relationship between ash fusion temperature and chemical composition,as well as the effects of Fe2O3 flux on the ash fusion temperature were studied.The relationship between ash fusion temperature and chemical composition,mineralogical phases and functional groups was analyzed with the FTIR method.The results show that the ash fusion temperature is related to the location and transmittance of certain absorption peaks,which is of great significance for the study of ash behavior.
基金sponsored by the Natural Science Foundation of China (Grant nos. 51775208)the Hubei Science Fund for Distinguished Young Scholars (No. 0216110085)+2 种基金the National Key Research and Development Program “Additive Manufacturing and Laser Manufacturing”(No. 2016YFB1100101)Wuhan Morning Light Plan of Youth Science and Technology (No. 0216110066)the Academic frontier youth team at Huazhong University of Science and Technology (HUST)
文摘Ag/SnO2,as a promising and environment-friendly electrical contact material,is widely applied in low-voltage apparatus.But the properties of Ag/SnO2 composites is difficult to improve due to the poor distribution phases and difficult component design.In this work,the Ag/SnO2 composites are prepared by selective laser melting.To get better performance,Ag/SnO2 composites with different energy density were studied.The microstructure was observed by field emission scanning electron microscope.In addition,reinforced SnO2 phase was characterized by X-ray diffraction and transmission electron microscope.The results indicated that the microstructure,relative density and hardness of are influenced by energy density,while Ag/SnO2 composites with homogeneous microstructure,high relative density,higher hardness and lower electrical resistivity can be obtained by proper energy density(E?68 J/mm^3).
基金Shenzhen Science and Technology Innovation Commission (No. ZDSYS201703031748354)National Science Foundation of Guangdong Province (No. 2016A030313756)+1 种基金the Pico Center at SUSTech with support from the Presidential fund and Development and Reform Commission of Shenzhen Municipality (No. 2016-726)the Humboldt Research Fellowship for Experienced Researchers.
文摘One of the bottleneck issues for commercial scale-up of Ti additive manufacturing lies in high cost of raw material, i.e. the spherical Ti powder that is often made by gas atomization. In this study, we address this significant issue by way of powder modification & ball milling processing, which shows that it is possible to produce printable Ti powders based on ultra- low cost, originally unprintable hydrogenation-dehydrogenation (HDH) Ti powder. It is also presented that the as-printed Ti using the modified powder exhibits outstanding mechanical properties, showing a combination of excellent fracture strength (~895 MPa) and high ductility (~19.0% elongation).
基金supported by the Knowledge Innovation Project in the Chinese Academy of Sciences(O45CF3A211)
文摘Municipal solid waste incinerator （MSWI） fly ash was melted using a set of direct current （DC） arc plasma furnace system for the first time in China. At a feed-rate of flying ash of 80 kg/h, the temperature at the gas outlet was above 1300℃. Dioxins in the off-gas were recorded as 0.029 ng I-TEQ/Nma （international toxic equivalent, I-TEQ）, well below 0.5 ngTEQ/Nm^3（toxic equivalent, TEQ）, while those in the melted product （slag） were 0.00035 ng/g I-TEQ. Molten slag from the furnace showed excellent resistance against the leaching of heavy metals. These results prove that the plasma furnace is effective for the detoxification and stabilization of MSWI fly ash.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 10232040 and 10672149)the foundation of Laboratory for Shock Wave and Detonation Physics Research, China Academy of Engineering Physics (Grant No 9140C6702020603)
文摘Asymmetric plate impact experiments are conducted on LY12 aluminium alloy in a pressure range of 85-131 GPa. The longitudinal sound speeds axe obtained from the time-resolved particle speed profiles of the specimen measured with Velocity Interferometer System for Any Reflector （VISAR） technique, and they are shown to be good agreement with our previously reported data of this alloy in a pressure range of 20-70 GPa, and also with those of 2024 aluminium reported by McQueen. Using all of the longitudinal speeds and the corresponding bulk speeds calculated from the Gruneisen equation of state （EOS）, shear moduli of LY12 aluminium alloy are obtained. A comparison of the shear moduli in the solid phase region with those estimated from the Steinberg model demonstrate that the latter are systematically lower than the measurements. By re-analysing the pressure effect on the shear modulus, a modified equation is proposed, in which the pressure term of P/η^1/3 in the Steinberg model is replaced by a linear term. Good agreement between experiments and the modified equation is obtained, which implies that the shear modulus of LY12 aluminium varies linearly both with pressure and with temperature throughout the whole solid phase region. On the other hand, shear modulus of aluminium in a solid-liquid mixed phrase region decreases gradually and smoothly, a feature that is very different from the drastic dropping at the melting point under static conditions.
文摘The Lie group method is applied to present an analysis of the magneto hydro-dynamics（MHD） steady laminar flow and the heat transfer from a warm laminar liquid flow to a melting moving surface in the presence of thermal radiation.By using the Lie group method,we have presented the transformation groups for the problem apart from the scaling group.The application of this method reduces the partial differential equations（PDEs） with their boundary conditions governing the flow and heat transfer to a system of nonlinear ordinary differential equations（ODEs） with appropriate boundary conditions.The resulting nonlinear system of ODEs is solved numerically using the implicit finite difference method（FDM）.The local skin-friction coefficients and the local Nusselt numbers for different physical parameters are presented in a table.
基金Project supported by the National Natural Science Foundation of China(Grant No.11664042)
文摘The melting of crystals is one of the most common and general phase transition phenomena.However, the mechanism of crystal melting is not well understood, and more experimental measurements and explorations are still needed.The mechanical spectra of propylene carbonate and 1,3-propanediol during the crystal melting processes are measured by the reed vibration mechanical spectroscopy for liquids(RMS-L) for the first time.The experimental results show that as the temperature increases, the real part of the complex Young modulus first decreases slowly, and then quickly drops to zero;meanwhile, its imaginary part increases slowly at first, then goes up and drops quickly to zero, showing a peak of internal friction.Preliminary analyses indicate that both the real and imaginary parts can present some characteristics of the melting process, such as the transition from the disconnected liquid regions to the connected liquid regions, that from the connected crystal regions to the disconnected crystal regions, and so on.In addition, the results show that the melting rate per unit volume of crystalline phase versus temperature satisfies the Arrhenius relation at the initial stage of melting, and deviates from this relation as the temperature increases to a certain value.Therefore, the RMS-L will provide an effective supplement for the further study of melting.
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFB1103604)the Industrial Transformation and Upgrading Funds of the Ministry of Industry and Information Technology,China(Grant No.RZJC-XM19-004)+2 种基金the Tianjin Municipal Special Program of Talents Development for Excellent Youth Scholars,China(Grant No.TJTZJH-QNBJRC-2-15)the National Natural Science Foundation of China(Grant No.61475117)the Scientific Research Program of Tianjin Municipal Education Commission,China(Grant No.2018KJ206)。
文摘WC-Co reinforced C276 alloy composite coatings are fabricated on Q235 steel by laser melting deposition.The microstructure,hardness,wear performance,and electrochemical corrosion behavior of composite coating are studied.The results show that WC-Co particles are mostly uniformly distributed in the coating and provide favorable conditions for heterogeneous nucleation.The microstructure of C276/WC-Co composite coatings is composed of γ-Ni solid solution dendrites and MoNi solid solution eutectics.The WC-Co particles can effectively improve the hardness and wear resistance of C276 alloy.The average hardness of the composite coating containing 10-wt% WC-Co(447 HV_(0.2)) are 1.26 times higher than that of the C276 alloy(356 HV_(0.2)).The wear rate of composite coating containing 10-wt% WC-Co(6.95 ×10^(-3) mg/m) is just 3.5% of that of C276 coating(196.23 × 10^(-3) mg/m).However,comparing with Hastelloy C276,the corrosion resistance of C276/WC-Co composite coating decreases.
基金The authors grateful acknowledge the financial support of the National Natural Science Foundation of China under Projects No.51871147 and 51704195the China Postdoctoral Science Foundation under Project No.19Z102060057+2 种基金the National Science and Technology Major Project under Project No.2017-VI-0013-0085the Science Fund for Creative Research Groups of the National Natural Science Foundation of China under Project No.51821001the Aviation Power Fund under Project No.6141B090324.
文摘Thermally stable nano-size ceramic particles are the preferred reinforcements for superalloys as they improve the alloys'microstructural stability and high-temperature properties.In this work,very dense and crack-free carbidereinforced GTD222(nickel-based superalloy)composites were prepared via selective laser melting(SLM).The distribution of TiC nanoparticles presents a three-dimensional(3D)network structure in the SLMed TiC/GTD222 composite.Mechanical testing revealed that the SLMed TiC/GTD222 composite has superior strength(UTS?1320 MPa,YS?1100 MPa)compared to the SLMed GTD222 superalloy.The GTD22 alloy reinforced with carbide nanoparticles’distinctive microstructure and its excellent mechanical properties for is discussed.
基金Supported by the"Shi-Pei Ji Hua",the National Science Foundation of China under Grant Nos 51402019 and 11574377the Beijing Natural Science Foundation under Grant No 2152011+5 种基金the National Basic Research Program of China under Grants No2014CB921500the Strategic Priority Research ProgramKey Research Program of Frontier Sciences of the Chinese Academy of Sciences under Grant Nos XDB07020100 and QYZDB-SSW-SLH013the U.S.Department of Energy,Office of Science,Basic Energy Sciences,Materials Sciences and Engineering Divisionthe CEMNSF MRSEC under Grant No DMR-1420451
文摘The mixed-valent Pb3Rh7O15 undergoes a Verwey-type transition at Tv≈180K, below which the development of Rh3＋3＋/Rh4＋4＋ charge order induces an abrupt conductor-to-insulator transition in resistivity. Here we investigate the effect of pressure on the Verwey-type transition of Pb3Rh7O15 by measuring its electrical resistivity under hydrostatic pressures up to 8GPa with a cubic anvil cell apparatus. We find that the application of high pressure can suppress the Verwey-type transition around 3GPa, above which a metallic state is realized at temperatures below ～70K, suggesting the melting of charge order by pressure. Interestingly, the low-temperature metallic region shrinks gradually upon further increasing pressure and disappears completely at P〉7GPa, which indicates that the charge carriers in Pb3Rh7O15 undergo a reentrant localization under higher pressures. We have constructed a temperature-pressure phase diagram for Pb3Rh7O15 and compared to that of Fe3O4, showing an archetype Verwey transition.
基金supported by the Knowledge Innovation Project in Chinese Academy of Sciences (045CF3A211)
文摘Fly ash from a municipal solid waste incinerator （MSWI） without preprocessing （original fly ash, OFA） was melted by a direct current （DC） plasma arc furnace to investigate how the feed forms governed the results. Dioxins in flue gas from stack and bag-filter ash （BFA） were detected. The distribution of heavy metals of Pb, Cd, As, and Cr along the flue gas process system was analyzed. Through a comparison of the results for dioxins and heavy metals in this study and previous work, carrying-over of fly ash particles with the flue gas stream can be deduced. Based on the magnetic induction equation and Navier-Stokes equations, a magnetohydrodynamic （MHD） model for the plasma arc was developed to describe the particle-carrying effect. The results indicate that, a. when melted, the feed forms of MSWI fly ash affect the results significantly; b. it is not preferable to melt MSWI fly ash directly, and efforts should be made to limit the mass transfer of OFA from the plasma furnace.
文摘The classical molecular dynamics simulations in canonical NVT ensemble conditions are used to investigate the melting transition in different heating rates of Pt-Ag-Au ternary nanoalloys.In order to obtain the initial configurations used in the molecular dynamics simulations,optimizing the chemical ordering of Pt_(13)AgnAu_(42−n)(n=0-42)ternary nanoalloys was performed using the Basin-Hopping algorithm which would not allow changes in the icosahedron structure.The Gupta many-body potential was used to model interatomic interactions in both molecular dynamics simulations and optimization simulations.The melting transitions of selected Pt-Ag-Au nanoalloys were explored using caloric curves and Lindemann parameters.There have been two identified types of melting mechanisms,one includes sudden jump behavior in the caloric curve and the other is an isomerization while melting transition.The temperature range in which the isomerization takes place depends on the heating rate value.
基金Project supported by the National Natural Science Foundation of China (Grant No 10776029/A06)
文摘The melting curve of Sn has been calculated using the dislocation-mediated melting model with the‘zone-linking method＇.The results are in good agreement with the experimental data.According to our calculation,the melting temperature of γ-Sn at zero pressure is about 436 K obtained by the extrapolation of the method from the triple point of Sn.The results show that this calculation method is better than other theoretical methods for predicting the melting curve of polymorphic material Sn.
基金Project supported by the National Natural Science Foundation of China(Grant No.21401064)the Science&Technology Development Program of Henan Province,China(Grant No.142300410282)the Program of Henan Educational Committee,China(Grant No.13B140986)
文摘The thermal stability of Ti@A1 core/shell nanoparticles with different sizes and components during continuous heating and cooling processes is examined by a molecular dynamics simulation with embedded atom method. The thermodynamic properties and structure evolution during continuous heating and cooling processes are investigated through the character- ization of the potential energy, specific heat distribution, and radial distribution function （RDF）. Our study shows that, for fixed Ti core size, the melting temperature decreases with A1 shell thickness, while the crystallizing temperature and glass formation temperature increase with A1 shell thickness. Diverse melting mechanisms have been discovered for different Ti core sized with fixed A1 shell thickness nanoparticles. The melting temperature increases with the Ti core radius. The trend agrees well with the theoretical phase diagram of bimetallic nanoparticles. In addition, the glass phase formation of A1-Ti nanoparticles for the fast cooling rate of 12 K/ps, and the crystal phase formation for the low cooling rate of 0.15 K/ps. The icosahedron structure is formed in the frozen 4366 A1-Ti atoms for the low cooling rate.
基金supported by the National Science Foundation of China(No.51475238)the Jiangsu Science and Technology Support Program(No.BE2014009-1)the Jiangsu Provincial Key Research and Development Plan (Nos.BE201561,BE201603-3)
文摘Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.
