Some ideas in the development of fault diagnosis system for spacecraft are introduced. Firstly, the architecture of spacecraft fault diagnosis is proposed hierarchically with four diagnosis frames, i.e., system level,...Some ideas in the development of fault diagnosis system for spacecraft are introduced. Firstly, the architecture of spacecraft fault diagnosis is proposed hierarchically with four diagnosis frames, i.e., system level, subsystem level, component level and element level. Secondly, a hierarchical diagnosis model is expressed with four layers, i.e., sensors layer, function layer, behavior layer and structure layer. These layers are used to work together to accomplish the fault alarm, diagnosis and localization. Thirdly, a fault-tree-oriented hybrid knowledge representation based on frame and generalized rule and its relevant reasoning strategy is put forward. Finally, a diagnosis case for spacecraft power system is exemplified combining the above with a powerful expert system development tool G2.展开更多
In recent years, China's increased interest in environmental protection has led to a promotion of energy-efficient dual fuel(diesel/natural gas) ships in Chinese inland rivers. A natural gas as ship fuel may pose ...In recent years, China's increased interest in environmental protection has led to a promotion of energy-efficient dual fuel(diesel/natural gas) ships in Chinese inland rivers. A natural gas as ship fuel may pose dangers of fire and explosion if a gas leak occurs. If explosions or fires occur in the engine rooms of a ship, heavy damage and losses will be incurred. In this paper, a fault tree model is presented that considers both fires and explosions in a dual fuel ship; in this model, dual fuel engine rooms are the top events. All the basic events along with the minimum cut sets are obtained through the analysis.The primary factors that affect accidents involving fires and explosions are determined by calculating the degree of structure importance of the basic events.According to these results, corresponding measures are proposed to ensure and improve the safety and reliability of Chinese inland dual fuel ships.展开更多
Aiming at the characteristics of complex logic relation and multiple dynamic gates in system,its failure probability model is established based on dynamic fault tree. For the multi-state dynamic fault tree,it can be t...Aiming at the characteristics of complex logic relation and multiple dynamic gates in system,its failure probability model is established based on dynamic fault tree. For the multi-state dynamic fault tree,it can be transferred into Markov chain with continuous parameters. The state transfer diagram can be decomposed into several state transfer chains,and the failure probability models can be derived according to the lengths of the chains. Then,the failure probability of the dynamic fault tree analysis(DFTA) can be obtained by adding each chain's probability. The failure probability calculation of DFTA based on the continuous parameter Markov chain is proposed and proved. Given an example,the analytic method is compared with the conventional methods which have to solve the differential equation. It is known from the results that the analytic method can be applied to engineering easily.展开更多
A common software to analyze fuze fault tree is developed to simplify the trivialness in generating the fuze fault tree and reduce the manual calculation work. The overall structure, function and implementation of the...A common software to analyze fuze fault tree is developed to simplify the trivialness in generating the fuze fault tree and reduce the manual calculation work. The overall structure, function and implementation of the system are introduced. The software based on Windows platform is used to generate the fuze fault tree in graphics mode. A quantitative analysis of fuze fault tree can be obtained by the method of minimum cut sets. A calculation example is used to verify the function of the software. Consequently, the expected requirements of this software system are achieved to a certain level.展开更多
In the past, the probabilities of basic events were described as triangular or trapezoidal fuzzy number that cannot characterize the common distribution of the primary events in engineering, and the fault tree analyze...In the past, the probabilities of basic events were described as triangular or trapezoidal fuzzy number that cannot characterize the common distribution of the primary events in engineering, and the fault tree analyzed by fuzzy set theory did not include repeated basic events. This paper presents a new method to analyze the fault tree by using normal fuzzy number to describe the fuzzy probability of each basic event which is more suitably used to analyze the reliability in safety systems, and then the formulae of computing the fuzzy probability of the top event of the fault tree which includes repeated events are derived. Finally, an example is given.展开更多
During the past decade, coal dust and gas explosions have been the most two serious types of disasters in China, threatening the lives of miners and causing significant losses in terms of national property. In this pa...During the past decade, coal dust and gas explosions have been the most two serious types of disasters in China, threatening the lives of miners and causing significant losses in terms of national property. In this paper, an evaluation model of coal dust and gas explosions was constructed based on a fuzzy fault tree by taking the Xingli Coal Mine as a research site to identify the risk factors of coal dust and gas explosions.Furthermore, the hazards associated with such explosions were evaluated for this particular coal mine.After completing an on-site investigation, the fuzzy probabilities of basic events were obtained through expert scoring, and these expert opinions were then aggregated as trapezoidal fuzzy numbers to calculate the degrees of importance of all basic events. Finally, these degrees of importance were sorted. According to the resulting order, the basic events with higher probabilities were determined to identify key hazards in the daily safety management of this particular coal mine. Moreover, effective measures for preventing gas and coal dust explosions were derived. The fuzzy fault tree analysis method is of high significance in the analysis of accidental coal mine explosions and provides theoretical guidance for improving the efficiency of coal mine safety management in a scientific and feasible manner.展开更多
Reliability allocation is a difficult multi-objective optimization problem. This paper presents a methodology for reliability allocation that can be applied to determine the reliability characteristics of reactor syst...Reliability allocation is a difficult multi-objective optimization problem. This paper presents a methodology for reliability allocation that can be applied to determine the reliability characteristics of reactor systems or subsystems. The dualistic contrast,known as one of the most powerful tools for optimization problems,is applied to the reliability allocation model of a typical system in this article. And the fault tree analysis,deemed to be one of the effective methods of reliability analysis,is also adopted. Thus a failure rate allocation model based on the fault tree analysis and dualistic contrast is achieved. An application on the emergency diesel generator in the nuclear power plant is given to illustrate the proposed method.展开更多
In an actual control system, it is often difficult to find out where the faults are if only based on the outside fault phenomena, acquired frequently from a fault system. So the fault diagnosis by outside fault phenom...In an actual control system, it is often difficult to find out where the faults are if only based on the outside fault phenomena, acquired frequently from a fault system. So the fault diagnosis by outside fault phenomena is considered. Based on the theory of fuzzy recognition and fault diagnosis, this method only depends on experience and statistical data to set up fuzzy query relationship between the outside phenomena (fault characters) and the fault sources (fault patterns). From this relationship the most probable fault sources can be obtained, to attain the goal of quick diagnosis. Based on the above approach, the standard fuzzy relationship matrix is stored in the computer as a system database. And experiment data are given to show the fault diagnosis results. The important parameters can be on line sampled and analyzed, and when faults occur, faults can be found, the alarm is given and the controller output is regulated.展开更多
针对复杂系统设计过程缺乏早期可靠性评估的问题,提出一种基于模型的系统工程方法支持复杂系统的设计及可靠性评估。结合复杂系统的研发特点,提出一种基于“使命、运行、功能、逻辑、物理、可靠性”的基于模型的系统工程(model-based sy...针对复杂系统设计过程缺乏早期可靠性评估的问题,提出一种基于模型的系统工程方法支持复杂系统的设计及可靠性评估。结合复杂系统的研发特点,提出一种基于“使命、运行、功能、逻辑、物理、可靠性”的基于模型的系统工程(model-based systems engineering, MBSE)建模方法,支持复杂系统设计和可靠性评估;利用基于“图、对象、属性、点、关系、角色”的系统建模语言KARMA对上述过程进行统一表达;通过KARMA的代码生成功能实现图模型到计算模型的映射,完成复杂系统可靠性的评估;将方法应用于液压系统案例,结果表明所提方法对于复杂系统设计和评估具备有效性。展开更多
文摘Some ideas in the development of fault diagnosis system for spacecraft are introduced. Firstly, the architecture of spacecraft fault diagnosis is proposed hierarchically with four diagnosis frames, i.e., system level, subsystem level, component level and element level. Secondly, a hierarchical diagnosis model is expressed with four layers, i.e., sensors layer, function layer, behavior layer and structure layer. These layers are used to work together to accomplish the fault alarm, diagnosis and localization. Thirdly, a fault-tree-oriented hybrid knowledge representation based on frame and generalized rule and its relevant reasoning strategy is put forward. Finally, a diagnosis case for spacecraft power system is exemplified combining the above with a powerful expert system development tool G2.
基金Supported by Transformation of Scientific and Technological Achievements Special Fund(No.SBA2015020077)
文摘In recent years, China's increased interest in environmental protection has led to a promotion of energy-efficient dual fuel(diesel/natural gas) ships in Chinese inland rivers. A natural gas as ship fuel may pose dangers of fire and explosion if a gas leak occurs. If explosions or fires occur in the engine rooms of a ship, heavy damage and losses will be incurred. In this paper, a fault tree model is presented that considers both fires and explosions in a dual fuel ship; in this model, dual fuel engine rooms are the top events. All the basic events along with the minimum cut sets are obtained through the analysis.The primary factors that affect accidents involving fires and explosions are determined by calculating the degree of structure importance of the basic events.According to these results, corresponding measures are proposed to ensure and improve the safety and reliability of Chinese inland dual fuel ships.
文摘Aiming at the characteristics of complex logic relation and multiple dynamic gates in system,its failure probability model is established based on dynamic fault tree. For the multi-state dynamic fault tree,it can be transferred into Markov chain with continuous parameters. The state transfer diagram can be decomposed into several state transfer chains,and the failure probability models can be derived according to the lengths of the chains. Then,the failure probability of the dynamic fault tree analysis(DFTA) can be obtained by adding each chain's probability. The failure probability calculation of DFTA based on the continuous parameter Markov chain is proposed and proved. Given an example,the analytic method is compared with the conventional methods which have to solve the differential equation. It is known from the results that the analytic method can be applied to engineering easily.
文摘A common software to analyze fuze fault tree is developed to simplify the trivialness in generating the fuze fault tree and reduce the manual calculation work. The overall structure, function and implementation of the system are introduced. The software based on Windows platform is used to generate the fuze fault tree in graphics mode. A quantitative analysis of fuze fault tree can be obtained by the method of minimum cut sets. A calculation example is used to verify the function of the software. Consequently, the expected requirements of this software system are achieved to a certain level.
文摘In the past, the probabilities of basic events were described as triangular or trapezoidal fuzzy number that cannot characterize the common distribution of the primary events in engineering, and the fault tree analyzed by fuzzy set theory did not include repeated basic events. This paper presents a new method to analyze the fault tree by using normal fuzzy number to describe the fuzzy probability of each basic event which is more suitably used to analyze the reliability in safety systems, and then the formulae of computing the fuzzy probability of the top event of the fault tree which includes repeated events are derived. Finally, an example is given.
基金supported by the National Natural Science Foundation of China (Nos.51504008,71371014,and 51774012)the Natural Science Foundation of Anhui Higher Education Institutions of China (No.KJ2015A068)+3 种基金the Anhui Provincial Natural Science Foundation (No.1608085QE115)the China Postdoctoral Science Foundation funded project (Nos.2015M571913 and 2018T110612)the Postdoctoral Fund of Anhui Province (No.2017B212)the Scientific Research Foundation for Introduction of Talent of Anhui University of Science & Technology (No.ZY530)
文摘During the past decade, coal dust and gas explosions have been the most two serious types of disasters in China, threatening the lives of miners and causing significant losses in terms of national property. In this paper, an evaluation model of coal dust and gas explosions was constructed based on a fuzzy fault tree by taking the Xingli Coal Mine as a research site to identify the risk factors of coal dust and gas explosions.Furthermore, the hazards associated with such explosions were evaluated for this particular coal mine.After completing an on-site investigation, the fuzzy probabilities of basic events were obtained through expert scoring, and these expert opinions were then aggregated as trapezoidal fuzzy numbers to calculate the degrees of importance of all basic events. Finally, these degrees of importance were sorted. According to the resulting order, the basic events with higher probabilities were determined to identify key hazards in the daily safety management of this particular coal mine. Moreover, effective measures for preventing gas and coal dust explosions were derived. The fuzzy fault tree analysis method is of high significance in the analysis of accidental coal mine explosions and provides theoretical guidance for improving the efficiency of coal mine safety management in a scientific and feasible manner.
文摘Reliability allocation is a difficult multi-objective optimization problem. This paper presents a methodology for reliability allocation that can be applied to determine the reliability characteristics of reactor systems or subsystems. The dualistic contrast,known as one of the most powerful tools for optimization problems,is applied to the reliability allocation model of a typical system in this article. And the fault tree analysis,deemed to be one of the effective methods of reliability analysis,is also adopted. Thus a failure rate allocation model based on the fault tree analysis and dualistic contrast is achieved. An application on the emergency diesel generator in the nuclear power plant is given to illustrate the proposed method.
文摘In an actual control system, it is often difficult to find out where the faults are if only based on the outside fault phenomena, acquired frequently from a fault system. So the fault diagnosis by outside fault phenomena is considered. Based on the theory of fuzzy recognition and fault diagnosis, this method only depends on experience and statistical data to set up fuzzy query relationship between the outside phenomena (fault characters) and the fault sources (fault patterns). From this relationship the most probable fault sources can be obtained, to attain the goal of quick diagnosis. Based on the above approach, the standard fuzzy relationship matrix is stored in the computer as a system database. And experiment data are given to show the fault diagnosis results. The important parameters can be on line sampled and analyzed, and when faults occur, faults can be found, the alarm is given and the controller output is regulated.
文摘针对复杂系统设计过程缺乏早期可靠性评估的问题,提出一种基于模型的系统工程方法支持复杂系统的设计及可靠性评估。结合复杂系统的研发特点,提出一种基于“使命、运行、功能、逻辑、物理、可靠性”的基于模型的系统工程(model-based systems engineering, MBSE)建模方法,支持复杂系统设计和可靠性评估;利用基于“图、对象、属性、点、关系、角色”的系统建模语言KARMA对上述过程进行统一表达;通过KARMA的代码生成功能实现图模型到计算模型的映射,完成复杂系统可靠性的评估;将方法应用于液压系统案例,结果表明所提方法对于复杂系统设计和评估具备有效性。
