Lithium nickel oxide(Li_(2)NiO_(2)),as a sacrificial cathode prelithiation additive,has been used to compensate for the lithium loss for improving the lifespan of lithium-ion batteries(LIBs).However,high-cost Li_(2)Ni...Lithium nickel oxide(Li_(2)NiO_(2)),as a sacrificial cathode prelithiation additive,has been used to compensate for the lithium loss for improving the lifespan of lithium-ion batteries(LIBs).However,high-cost Li_(2)NiO_(2)suffers from inferior delithiation kinetics during the first cycle.Herein,we investigated the effects of the cost-effective copper substituted Li_(2)Ni_(1-x)Cu_(x)O_(2)(x=0,0.2,0.3,0.5,0.7)synthesized by a high-temperature solid-phase method on the structure,morphology,electrochemical performance of graphite‖LiFePO_(4)battery.The X-ray diffraction(XRD)refinement result demonstrated that Cu substitution strategy could be favorable for eliminating the NiO_(x)impurity phase and weakening Li-O bond.Analysis on density of states(DOS)indicates that Cu substitution is good for enhancing the electronic conductivity,as well as reducing the delithi-ation voltage polarization confirmed by electrochemical characterizations.Therefore,the optimal Li_(2)Ni_(0.7)Cu_(0.3)O_(2)delivered a high delithiation capacity of 437 mAh·g^(-1),around 8%above that of the pristine Li_(2)NiO_(2).Furthermore,a graphite‖LiFePO_(4)pouch cell with a nominal capacity of 3000 mAh demonstrated a notably improved reversible capacity,energy density and cycle life through introducing 2 wt%Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive,delivering a 6.2 mAh·g^(-1)higher initial discharge capacity and achieving around 5%improvement in capacity retentnion at 0.5P over 1000 cycles.Additionally,the post-mortem analyses testified that the Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive could suppress solid electrolyte interphase(SEI)decomposition and homogenize the Li distribution,which benefits to stabilizing interface between graphite and electrolyte,and alleviating dendritic Li plating.In conclusion,the Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive may offer advantages such as lower cost,lower delithiation voltage and higher prelithiation capacity compared with Li_(2)NiO_(2),making it a promising candidate of cathode prelithiation additive for next-generation LIBs.展开更多
Crystalline@amorphous NiCo_(2)S_(4)@MoS_(2)(v-NCS@MS)nanostructures were designed and constructed via an ethylene glycol-induced strategy with hydrothermal synthesis and solvothermal method,which simultaneously realiz...Crystalline@amorphous NiCo_(2)S_(4)@MoS_(2)(v-NCS@MS)nanostructures were designed and constructed via an ethylene glycol-induced strategy with hydrothermal synthesis and solvothermal method,which simultaneously realized the defect regulation of crystal NiCo_(2)S_(4) in the core.Taking advantage of the flexible protection of an amor-phous shell and the high capacity of a conductive core with defects,the v-NCS@MS electrode exhibited high specif-ic capacity(1034 mAh·g^(-1) at 1 A·g^(-1))and outstanding rate capability.Moreover,a hybrid supercapacitor was assembled with v-NCS@MS as cathode and activated carbon(AC)as anode,which can achieve remarkably high specific energy of 111 Wh·kg^(-1) at a specific power of 219 W·kg^(-1) and outstanding capacity retention of 80.5%after 15000 cycling at different current densities.展开更多
As a negative electrode material for lithium-ion batteries,silicon monoxide(SiO)suffers from dramatic volume changes during cycling,causing excessive stress within the electrode and resulting in electrode deformation ...As a negative electrode material for lithium-ion batteries,silicon monoxide(SiO)suffers from dramatic volume changes during cycling,causing excessive stress within the electrode and resulting in electrode deformation and fragmentation.This ultimately leads to a decrease in cell capacity.The trends of volume expansion and capacity change of the SiO/graphite(SiO/C)composite electrode during cycling were investigated via in situ expansion monitoring.First,a series of expansion test schemes were designed,and the linear relationship between negative electrode expansion and cell capacity degradation was quantitatively analyzed.Then,the effects of different initial pressures on the long-term cycling performance of the cell were evaluated.Finally,the mechanism of their effects was analyzed by scanning electron microscope.The results show that after 50 cycles,the cell capacity decreases from 2.556 mAh to 1.689 mAh,with a capacity retention ratio(CRR)of only 66.08%.A linear relationship between the capacity retention ratio and thickness expansion was found.Electrochemical measurements and scanning electron microscope images demonstrate that intense stress inhibits the lithiation of the negative electrode and that the electrode is more susceptible to irreversible damage during cycling.Overall,these results reveal the relationship between the cycling performance of SiO and the internal pressure of the electrode from a macroscopic point of view,which provides some reference for the application of SiO/C composite electrodes in lithium-ion batteries.展开更多
In order to find out the impact of aluminum alloy hub replaced by the magnesium alloy hub on environment,the resource consumption,energy consumption and pollutant emission during hub production and their service life ...In order to find out the impact of aluminum alloy hub replaced by the magnesium alloy hub on environment,the resource consumption,energy consumption and pollutant emission during hub production and their service life of the two types of hubs are investigated based on the life cycle assessment(LCA)theory.The results indicate that the adverse impact on environment can be effectively reduced by the application of magnesium alloy hubs.Compared with aluminum alloy hubs,the global warming potential(GWP)and human toxicity potential(HTP)are reduced by 39.6%and 24.0%,respectively.CO2 is the main pollutant in the life cycles of the two kinds of hubs,which is generated throughout the whole life cycle including the fabrication process and the service life,while the pollutants of particles mainly come from the fabrication stage.Compared with the aluminum alloy hubs,the green effect brought by magnesium alloy hubs is mainly due to the reduction of fuel consumption caused by weight loss.展开更多
Achieving sustainable patterns of consumption and production is perhaps the biggest challenge facing our society today. The de-mand for more safe environmentally benign products is rising and many companies are lookin...Achieving sustainable patterns of consumption and production is perhaps the biggest challenge facing our society today. The de-mand for more safe environmentally benign products is rising and many companies are looking for new ways to progressively improve the sus-tainability of their products. Moreover, there are numerous opportunities and countless innovations, technological as well as non-technologi-cal,that need to be exploited to improve the sustainability of products. Manufacturing industry is an important sector of any economy and hasthe potential to become a driving force for enabling sustainable patterns of production and consumption through introducing efficient productionpractices and developing products and services that help reduce environmental impacts. The benefits of adopting an integrated policy towardsproduct development based on life cycle thinking and eco-design to stimulate improvement of the environmental performance of each part ofproduct life cycle phases and achieve sustainable patterns of production and consumption are emphasized. The challenges in implementingsustainable manufacturing and the circular economy approaches are listed. A number of solutions are suggested to face up these challenges,for instance, increased awareness of enterprises particularly SME's of product life cycle issues and the opportunities that are available for costsavings and profit making from eco-innovation in product development for both the domestic and export markets and providing practical helpand advice directly to enterprises on integrated product development to promote enterprise led Eco-innovation. Aiming at contributing to sus-tainable manufacturing in China, Sino-UK Low Carbon Manufacturing Consortium, a multi-disciplinary research and educational partnershipbetween academia, industry and government agencies in the UK and China with interest in sustainable manufacturing issues, has been formedrecently.The vision, aims and benefits of membership of the consortium are also discussed.展开更多
Based on the principle of life cycle assessment, CO2 and SO2 emission of Imperial Smelting Process in a certain zinc-lead smelter was analyzed by life cycle inventory method. According to the system expansion and subs...Based on the principle of life cycle assessment, CO2 and SO2 emission of Imperial Smelting Process in a certain zinc-lead smelter was analyzed by life cycle inventory method. According to the system expansion and substitution method, the environmental impacts of co-products were allocated among the main products of zinc, lead and sulfuric acid. The related impacts were assessed by use of Global Warming Potential （GWP） and Acidification Potential （ACP）. The results show that the GWP index from 1998 to 2000 is 11.53, 11.65, 10.93 tCO2-eq/tZn respectively, the ACP index decreases from 14.88 kgSO2-eq/tZn in 1998 to 10.99 kgSO2-eq/tZn in 2000. Power and electricity generation, followed by smelting and zinc distillation, are mainly responsible for GWP. Sintering individually affects ACP. Reduction in greenhouse gas emissions of the ISP may come from energy conservation measures rather than from technological developments. And recycling more secondary Pb and Zn materials effectively treated by ISP, and reducing the amount of primary metal are the main ways to put SO2 emission under control.展开更多
The problem of sequential fault diagnosis is to construct a diagnosis tree that can isolate the failure sources with minimal test cost. Pervious sequential fault diagnosis strategy generating algorithms only consider ...The problem of sequential fault diagnosis is to construct a diagnosis tree that can isolate the failure sources with minimal test cost. Pervious sequential fault diagnosis strategy generating algorithms only consider the execution cost at application stage, which may result in a solution with poor quality from the view of life cycle cost. Furthermore, due to the fact that uncertain information exists extensively in the real-world systems, the tests are always imperfect. In order to reduce the cost of fault diagnosis in the realistic systems, the sequential fault diagnosis problem with imperfect tests considering life cycle cost is presented and formulated in this work, which is an intractable NP-hard AND/OR decision tree construction problem. An algorithm based on AND/OR graph search is proposed to solve this problem. Heuristic search based on information theory is applied to generate the sub-tree in the algorithm. Some practical issues such as the method to improve the computational efficiency and the diagnosis strategy with multi-outcome tests are discussed. The algorithm is tested and compared with previous algorithms on the simulated systems with different scales and uncertainty. Application on a wheel momentum system of a spacecraft is studied in detail. Both the simulation and application results suggest that the cost of the diagnosis strategy can be reduced significantly by using the proposed algorithm, especially when the placement cost of the tests constitutes a large part of the total cost.展开更多
The life cycle of CIMS (Computer Integrated Manufacturing System) includes four phases:requirement analyzing, designing, implementation and running. For reducing the risk of investment and achieving better economic re...The life cycle of CIMS (Computer Integrated Manufacturing System) includes four phases:requirement analyzing, designing, implementation and running. For reducing the risk of investment and achieving better economic results the simulation technique is needed in the above four phases of CIMS life cycle. Under the support of China 863/CIMS plan a series of simulation projects are established. Some of them are finished with succeed and have been used in application. In this paper four simulation projects are introduced.(1) The Integrated Manufacturing Simulation Software (IMSS). It is an integrated platform, based on the discrete event simulation principle. It can be used to analyze and design CIMS, especially FMS; and evaluate the daily production plan.(2) The Advanced Hierarchical Control System Emulator (AHCSE), a software system, based on the finite state machine principle. It can be used to analyze and design of CIMS hicrarchical control system, and check expanded system performance before expanding.(3) The Factory Scheduling Environment (FASE), a software system based on the discrete event simulation principle and artificial intelligence technology. It can be used for shop floor scheduling. (4) The Machining Process Simulator (MPS). It can simulate the machining process of machining center by computer. It can check the correctness of NC code (including interference and confliction) and replace the real machining center to support the simulation environment for shop floor scheduling and controlling. There are three companies and universities joining in these four projects, they are: Tsinghua University,Huazhong University of Technology, Beliing Institute of Computer Application and Simulation.展开更多
Developing supercapacitors(SCs)with long cycling life and wide operative voltage window is a significant topic in the field of aqueous electrolytes.Although the design of water in salt(WIS)electrolytes has pushed the ...Developing supercapacitors(SCs)with long cycling life and wide operative voltage window is a significant topic in the field of aqueous electrolytes.Although the design of water in salt(WIS)electrolytes has pushed the development of aqueous electrolytes to a new height,the WIS electrolytes with an operative voltage window of up to 2.5 V is still very scarce.Herein,in order to enrich the type of aqueous electrolyte with high operative voltage,tetramethylammonium trifluoromethanesulfonate(TMAOTf)based WIS electrolyte was used as a model to construct WIS based hybrid electrolyte with acetonitrile(ACN)co-solvent and LiTFSI co-solute.In view of the coordination effect of ACN and Lit on free water in TMAOTf based WIS electrolyte,the TMAt-Lit-AWIS electrolyte has the electrochemical stabilization window of up to 3.35 V.Further coupled with the commercial YP-50F electrodes,TMAt-Lit-AWIS based SCs exhibited wide operative voltage window(2.5 V),long cycling life(45,000 cycles)and good low-temperature performance(99.99%capacitance retention after 2000 cycles at20℃).The design of this hybrid electrolyte will enrich the types of aqueous hybrid electrolytes with long cycling life and wide operative voltage window.展开更多
Using solid waste as a substitute for conventional cement has become an important way to reduce carbon emissions.This paper attempted to utilize steel slag(SS)and fly ash(FA)as supplementary cementitious material by u...Using solid waste as a substitute for conventional cement has become an important way to reduce carbon emissions.This paper attempted to utilize steel slag(SS)and fly ash(FA)as supplementary cementitious material by utilizing CO_(2)mineralization curing technology.This study examined the dominant and interactive influences of the residual water/cement ratio,CO_(2)pressure,curing time,and SS content on the mechanical properties and CO_(2)uptake rate of CO_(2)mineralization curing SS-FA-Portland cement ternary paste specimens.Additionally,microstructural development was analyzed.The findings demonstrated that each factor significantly affected compressive strength and CO_(2)uptake rate,with factor interactions becoming more pronounced at higher SS dosages(>30%),lower residual water/cement ratios(0.1-0.15),and CO_(2)pressures of 0.1-0.3 MPa.Microscopic examinations revealed that mineralization primarily yielded CaCO_(3)and silica gel.The residual w/c ratio and SS content significantly influenced the CaCO_(3)content and crystallinity of the mineralization products.Post-mineralization curing,the percentage of pores larger than 50 nm significantly decreased,the proportion of harmless pores smaller than 20 nm increased,and pore structure improved.This study also found that using CO_(2)mineralization curing SS-FA-Portland cement solid waste concrete can significantly reduce the negative impact on the environment.展开更多
Environmental impact evaluation system boundary of high-speed railway was defined based on the total life cycle theory,and the index system to evaluate the environmental impact of high-speed railway was established wi...Environmental impact evaluation system boundary of high-speed railway was defined based on the total life cycle theory,and the index system to evaluate the environmental impact of high-speed railway was established with the fuzzy analytic hierarchy method,and the matter-element evaluation model was established on the basis of the extension theory.By calculating its comprehensive interrelatedness,the evaluation rank of environment impacts of high-speed railway was determined.The numerical example shows that the model has vast prospect,which can not only expand the application areas of extension theory,but also change the traditional evaluation methods and provide new ideas and means for environmental impact evaluation of high-speed railway.展开更多
Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the...Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the optimal ESS duration. The failure phenomena of ESS are modeled by mixed distribution, and optimal ESS duration is defined by maximizing life-cycle cost savings under the condition of meeting reliability requirement.展开更多
This paper considers an optimal sequential inspection schedule for a second-hand product after that the free nonrenewable warranty is expired. The length of warranty is prespecified and during the warranty period, the...This paper considers an optimal sequential inspection schedule for a second-hand product after that the free nonrenewable warranty is expired. The length of warranty is prespecified and during the warranty period, the product is minimally repaired by the dealer when it fails. Following the expiration of the non-renewing warranty, the product is inspected and upgraded sequentially a fixed number of times at the expenses of the customer.At each inspection, the failure rate of the product is reduced proportionally so that the product is upgraded. The product is assumed to deteriorate as it ages and the replacement of the product occurs when a fixed number of inspections are rendered. In addition,the intervals between two successive inspections are assumed to decrease monotonically. The main objective of this paper is to determine the optimal improvement level to upgrade the product at each inspection so that the expected maintenance cost during the life cycle of the product is minimized from the perspective of the customer. Under the given cost structures, we derive an explicit formula to obtain the expected maintenance cost incurred during the life cycle of the product and discuss the method to find the optimal level of the improvement analytically in case the failure times follow the Weibull distribution. Numerical results are analyzed to observe the impact of relevant parameters on the optimal solution.展开更多
Background Apolygus lucorum is a worldwide omnivorous pest damaging a range of crops and causing great economic losses.Symbiotic bacteria living in insects play a key role in the nutrition,physiology,and behavior of h...Background Apolygus lucorum is a worldwide omnivorous pest damaging a range of crops and causing great economic losses.Symbiotic bacteria living in insects play a key role in the nutrition,physiology,and behavior of hosts.Here,we present an experiment using Illumina HiSeq sequencing targeting the V3–V4 regions of bacteria’s 16S rRNA throughout the entire life cycle of A.lucorum.Results The first and second instar nymphs have the largest alpha diversity compared with other life stages of the insect.Bacterial phyla Proteobacteria(72.29%),Firmicutes(15.24%),Actinobacteria(7.76%)exhibit the largest relative abundance in all developmental stages.Erwinia(23.97%)and Lactococcus(10.62%)are the two genera with the high-est relative abundance.The relative abundance of Erwinia in the nymph stage is significantly greater than the adult stage,and the relative abundance of Lactococcus in 6-day-old and 9-day-old adult females is higher compared with adult males.Conclusions These results reveal that microbial community composition and relative abundance shift dynamically at different life stages,implying that different bacterial phyla and genera may have specific roles in specific life stages such as metabolism,nutrition absorption,detoxification,and reproduction.This study reveals for the first time the community composition and ecological dynamics of symbiotic bacteria throughout the life stages of A.lucorum,and thus may provide insight to new strategies for pest control.展开更多
To quantify the energy consumption in the process of production, transportation and processing of energy carriers, the life cycle of building energy used can be divided into two phases： on-site phase and embodied pha...To quantify the energy consumption in the process of production, transportation and processing of energy carriers, the life cycle of building energy used can be divided into two phases： on-site phase and embodied phase. As for the embodied phase, with the data in existing statistic yearbook, the consumption items of energy production and transportation were investigated. And based on the life cycle theory, an embodied coefficient of energy carriers was proposed to quantify the embodied energy consumption. Moreover, a calculation method for the embodied coefficient of energy carriers was deduced using Leontief inverse matrix based on the existing data sources. With relevant data of 2005-2007 in China, the embodied coefficients in 2005-2007 were obtained, in which the values for natural gas and thermal power are around 1.3 and 3. l, respectively; while they are 1.03-1.08 for other selected energy carriers. In addition, it is also found that the consumption in the production and processing accounts for more than 75%.展开更多
The serious competition environment of global marke t requests the enterprise to change traditional product development strategy and a dopt new theory in order to meet diverse customer needs while maintaining near m a...The serious competition environment of global marke t requests the enterprise to change traditional product development strategy and a dopt new theory in order to meet diverse customer needs while maintaining near m ass production efficiency, which is the main philosophy of mass customization. P roduct family design is research focus at present and also is the core technolog y of DFMC (design for mass customization). Firstly, this paper explores the fund amental issues of product family, such as concepts of modularity, commonality/di versity, product platform and product family architecture etc. We compare the te rminology between product family and object-oriented approach in the next step. Thirdly, this paper puts forwards one product family design methodology based o n product platform and under different phase of product life cycle constrains, f or example, functional, assembly and service etc. At the end section of this pap er, we applied, the object-oriented approach in above mentioned product family design methodology to realize the design process. In one word, this paper propos ed one product family design methodology based on object oriented approach and p roduct life cycle consideration, especially the conjointness of characteristic o f OOA and concepts of product family. The main property of OOA are encapsulation , inherence and polymorphism. Encapsulation can represent the module or building blocks of product family. Inherence can be extended to describe the modularity and commonality, and also be used to construct variant space. Alternative specif ic of product family architecture can be embodied with polymorphism. And fin aly, we give the future work contents. In order to derive the product platform a nd achieve modularity and commonality/diversity, interface management between bu ilding block is necessary. The question is how the OOA can be applied in interfa ce management to get our aim OOA is the basis of many information management sy stem, then the question is how to build one system to manage the information of product family and support mass customization The third question is how to deve lop one computer aided tool to facilitate the application of OOA for product fam ily design, even be used to category of design for mass customization.展开更多
基金supported by the Significant Science and Technology Project in Xiamen(Future Industry Field)(Grant No.3502Z20231057).
文摘Lithium nickel oxide(Li_(2)NiO_(2)),as a sacrificial cathode prelithiation additive,has been used to compensate for the lithium loss for improving the lifespan of lithium-ion batteries(LIBs).However,high-cost Li_(2)NiO_(2)suffers from inferior delithiation kinetics during the first cycle.Herein,we investigated the effects of the cost-effective copper substituted Li_(2)Ni_(1-x)Cu_(x)O_(2)(x=0,0.2,0.3,0.5,0.7)synthesized by a high-temperature solid-phase method on the structure,morphology,electrochemical performance of graphite‖LiFePO_(4)battery.The X-ray diffraction(XRD)refinement result demonstrated that Cu substitution strategy could be favorable for eliminating the NiO_(x)impurity phase and weakening Li-O bond.Analysis on density of states(DOS)indicates that Cu substitution is good for enhancing the electronic conductivity,as well as reducing the delithi-ation voltage polarization confirmed by electrochemical characterizations.Therefore,the optimal Li_(2)Ni_(0.7)Cu_(0.3)O_(2)delivered a high delithiation capacity of 437 mAh·g^(-1),around 8%above that of the pristine Li_(2)NiO_(2).Furthermore,a graphite‖LiFePO_(4)pouch cell with a nominal capacity of 3000 mAh demonstrated a notably improved reversible capacity,energy density and cycle life through introducing 2 wt%Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive,delivering a 6.2 mAh·g^(-1)higher initial discharge capacity and achieving around 5%improvement in capacity retentnion at 0.5P over 1000 cycles.Additionally,the post-mortem analyses testified that the Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive could suppress solid electrolyte interphase(SEI)decomposition and homogenize the Li distribution,which benefits to stabilizing interface between graphite and electrolyte,and alleviating dendritic Li plating.In conclusion,the Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive may offer advantages such as lower cost,lower delithiation voltage and higher prelithiation capacity compared with Li_(2)NiO_(2),making it a promising candidate of cathode prelithiation additive for next-generation LIBs.
文摘Crystalline@amorphous NiCo_(2)S_(4)@MoS_(2)(v-NCS@MS)nanostructures were designed and constructed via an ethylene glycol-induced strategy with hydrothermal synthesis and solvothermal method,which simultaneously realized the defect regulation of crystal NiCo_(2)S_(4) in the core.Taking advantage of the flexible protection of an amor-phous shell and the high capacity of a conductive core with defects,the v-NCS@MS electrode exhibited high specif-ic capacity(1034 mAh·g^(-1) at 1 A·g^(-1))and outstanding rate capability.Moreover,a hybrid supercapacitor was assembled with v-NCS@MS as cathode and activated carbon(AC)as anode,which can achieve remarkably high specific energy of 111 Wh·kg^(-1) at a specific power of 219 W·kg^(-1) and outstanding capacity retention of 80.5%after 15000 cycling at different current densities.
基金supported by the Fundamental Research Funds for the Central Universities(WK2090000055)Anhui Provincial Natural Science Foundation of China(2308085QG231).
文摘As a negative electrode material for lithium-ion batteries,silicon monoxide(SiO)suffers from dramatic volume changes during cycling,causing excessive stress within the electrode and resulting in electrode deformation and fragmentation.This ultimately leads to a decrease in cell capacity.The trends of volume expansion and capacity change of the SiO/graphite(SiO/C)composite electrode during cycling were investigated via in situ expansion monitoring.First,a series of expansion test schemes were designed,and the linear relationship between negative electrode expansion and cell capacity degradation was quantitatively analyzed.Then,the effects of different initial pressures on the long-term cycling performance of the cell were evaluated.Finally,the mechanism of their effects was analyzed by scanning electron microscope.The results show that after 50 cycles,the cell capacity decreases from 2.556 mAh to 1.689 mAh,with a capacity retention ratio(CRR)of only 66.08%.A linear relationship between the capacity retention ratio and thickness expansion was found.Electrochemical measurements and scanning electron microscope images demonstrate that intense stress inhibits the lithiation of the negative electrode and that the electrode is more susceptible to irreversible damage during cycling.Overall,these results reveal the relationship between the cycling performance of SiO and the internal pressure of the electrode from a macroscopic point of view,which provides some reference for the application of SiO/C composite electrodes in lithium-ion batteries.
基金Projects(51605159,51475162)supported by the National Natural Science Foundation of ChinaProject(16B092)supported by the Hunan Education Department Outstanding Youth Foundation,ChinaProject(2016JJ5042)supported by the Natural Science Foundation of Hunan Province,China
文摘In order to find out the impact of aluminum alloy hub replaced by the magnesium alloy hub on environment,the resource consumption,energy consumption and pollutant emission during hub production and their service life of the two types of hubs are investigated based on the life cycle assessment(LCA)theory.The results indicate that the adverse impact on environment can be effectively reduced by the application of magnesium alloy hubs.Compared with aluminum alloy hubs,the global warming potential(GWP)and human toxicity potential(HTP)are reduced by 39.6%and 24.0%,respectively.CO2 is the main pollutant in the life cycles of the two kinds of hubs,which is generated throughout the whole life cycle including the fabrication process and the service life,while the pollutants of particles mainly come from the fabrication stage.Compared with the aluminum alloy hubs,the green effect brought by magnesium alloy hubs is mainly due to the reduction of fuel consumption caused by weight loss.
文摘Achieving sustainable patterns of consumption and production is perhaps the biggest challenge facing our society today. The de-mand for more safe environmentally benign products is rising and many companies are looking for new ways to progressively improve the sus-tainability of their products. Moreover, there are numerous opportunities and countless innovations, technological as well as non-technologi-cal,that need to be exploited to improve the sustainability of products. Manufacturing industry is an important sector of any economy and hasthe potential to become a driving force for enabling sustainable patterns of production and consumption through introducing efficient productionpractices and developing products and services that help reduce environmental impacts. The benefits of adopting an integrated policy towardsproduct development based on life cycle thinking and eco-design to stimulate improvement of the environmental performance of each part ofproduct life cycle phases and achieve sustainable patterns of production and consumption are emphasized. The challenges in implementingsustainable manufacturing and the circular economy approaches are listed. A number of solutions are suggested to face up these challenges,for instance, increased awareness of enterprises particularly SME's of product life cycle issues and the opportunities that are available for costsavings and profit making from eco-innovation in product development for both the domestic and export markets and providing practical helpand advice directly to enterprises on integrated product development to promote enterprise led Eco-innovation. Aiming at contributing to sus-tainable manufacturing in China, Sino-UK Low Carbon Manufacturing Consortium, a multi-disciplinary research and educational partnershipbetween academia, industry and government agencies in the UK and China with interest in sustainable manufacturing issues, has been formedrecently.The vision, aims and benefits of membership of the consortium are also discussed.
文摘Based on the principle of life cycle assessment, CO2 and SO2 emission of Imperial Smelting Process in a certain zinc-lead smelter was analyzed by life cycle inventory method. According to the system expansion and substitution method, the environmental impacts of co-products were allocated among the main products of zinc, lead and sulfuric acid. The related impacts were assessed by use of Global Warming Potential （GWP） and Acidification Potential （ACP）. The results show that the GWP index from 1998 to 2000 is 11.53, 11.65, 10.93 tCO2-eq/tZn respectively, the ACP index decreases from 14.88 kgSO2-eq/tZn in 1998 to 10.99 kgSO2-eq/tZn in 2000. Power and electricity generation, followed by smelting and zinc distillation, are mainly responsible for GWP. Sintering individually affects ACP. Reduction in greenhouse gas emissions of the ISP may come from energy conservation measures rather than from technological developments. And recycling more secondary Pb and Zn materials effectively treated by ISP, and reducing the amount of primary metal are the main ways to put SO2 emission under control.
基金Project(C1320063131)supported by China Civil Space Foundation
文摘The problem of sequential fault diagnosis is to construct a diagnosis tree that can isolate the failure sources with minimal test cost. Pervious sequential fault diagnosis strategy generating algorithms only consider the execution cost at application stage, which may result in a solution with poor quality from the view of life cycle cost. Furthermore, due to the fact that uncertain information exists extensively in the real-world systems, the tests are always imperfect. In order to reduce the cost of fault diagnosis in the realistic systems, the sequential fault diagnosis problem with imperfect tests considering life cycle cost is presented and formulated in this work, which is an intractable NP-hard AND/OR decision tree construction problem. An algorithm based on AND/OR graph search is proposed to solve this problem. Heuristic search based on information theory is applied to generate the sub-tree in the algorithm. Some practical issues such as the method to improve the computational efficiency and the diagnosis strategy with multi-outcome tests are discussed. The algorithm is tested and compared with previous algorithms on the simulated systems with different scales and uncertainty. Application on a wheel momentum system of a spacecraft is studied in detail. Both the simulation and application results suggest that the cost of the diagnosis strategy can be reduced significantly by using the proposed algorithm, especially when the placement cost of the tests constitutes a large part of the total cost.
文摘The life cycle of CIMS (Computer Integrated Manufacturing System) includes four phases:requirement analyzing, designing, implementation and running. For reducing the risk of investment and achieving better economic results the simulation technique is needed in the above four phases of CIMS life cycle. Under the support of China 863/CIMS plan a series of simulation projects are established. Some of them are finished with succeed and have been used in application. In this paper four simulation projects are introduced.(1) The Integrated Manufacturing Simulation Software (IMSS). It is an integrated platform, based on the discrete event simulation principle. It can be used to analyze and design CIMS, especially FMS; and evaluate the daily production plan.(2) The Advanced Hierarchical Control System Emulator (AHCSE), a software system, based on the finite state machine principle. It can be used to analyze and design of CIMS hicrarchical control system, and check expanded system performance before expanding.(3) The Factory Scheduling Environment (FASE), a software system based on the discrete event simulation principle and artificial intelligence technology. It can be used for shop floor scheduling. (4) The Machining Process Simulator (MPS). It can simulate the machining process of machining center by computer. It can check the correctness of NC code (including interference and confliction) and replace the real machining center to support the simulation environment for shop floor scheduling and controlling. There are three companies and universities joining in these four projects, they are: Tsinghua University,Huazhong University of Technology, Beliing Institute of Computer Application and Simulation.
基金supported by the Longkou City Science and Technology Research and Development Plan(No.2020KJJH061).
文摘Developing supercapacitors(SCs)with long cycling life and wide operative voltage window is a significant topic in the field of aqueous electrolytes.Although the design of water in salt(WIS)electrolytes has pushed the development of aqueous electrolytes to a new height,the WIS electrolytes with an operative voltage window of up to 2.5 V is still very scarce.Herein,in order to enrich the type of aqueous electrolyte with high operative voltage,tetramethylammonium trifluoromethanesulfonate(TMAOTf)based WIS electrolyte was used as a model to construct WIS based hybrid electrolyte with acetonitrile(ACN)co-solvent and LiTFSI co-solute.In view of the coordination effect of ACN and Lit on free water in TMAOTf based WIS electrolyte,the TMAt-Lit-AWIS electrolyte has the electrochemical stabilization window of up to 3.35 V.Further coupled with the commercial YP-50F electrodes,TMAt-Lit-AWIS based SCs exhibited wide operative voltage window(2.5 V),long cycling life(45,000 cycles)and good low-temperature performance(99.99%capacitance retention after 2000 cycles at20℃).The design of this hybrid electrolyte will enrich the types of aqueous hybrid electrolytes with long cycling life and wide operative voltage window.
基金Project(52479115)supported by the National Natural Science Foundation of ChinaProject(2024SF-YBXM-615)supported by the Key Research and Development Program of Shaanxi Province,China+1 种基金Project(2022943)supported by the Youth Innovation Team of Shaanxi Universities,ChinaProject(300102283721)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Using solid waste as a substitute for conventional cement has become an important way to reduce carbon emissions.This paper attempted to utilize steel slag(SS)and fly ash(FA)as supplementary cementitious material by utilizing CO_(2)mineralization curing technology.This study examined the dominant and interactive influences of the residual water/cement ratio,CO_(2)pressure,curing time,and SS content on the mechanical properties and CO_(2)uptake rate of CO_(2)mineralization curing SS-FA-Portland cement ternary paste specimens.Additionally,microstructural development was analyzed.The findings demonstrated that each factor significantly affected compressive strength and CO_(2)uptake rate,with factor interactions becoming more pronounced at higher SS dosages(>30%),lower residual water/cement ratios(0.1-0.15),and CO_(2)pressures of 0.1-0.3 MPa.Microscopic examinations revealed that mineralization primarily yielded CaCO_(3)and silica gel.The residual w/c ratio and SS content significantly influenced the CaCO_(3)content and crystallinity of the mineralization products.Post-mineralization curing,the percentage of pores larger than 50 nm significantly decreased,the proportion of harmless pores smaller than 20 nm increased,and pore structure improved.This study also found that using CO_(2)mineralization curing SS-FA-Portland cement solid waste concrete can significantly reduce the negative impact on the environment.
基金Project(2011QNZT062)supported by the Fundamental Research Funds for Central Universities of China
文摘Environmental impact evaluation system boundary of high-speed railway was defined based on the total life cycle theory,and the index system to evaluate the environmental impact of high-speed railway was established with the fuzzy analytic hierarchy method,and the matter-element evaluation model was established on the basis of the extension theory.By calculating its comprehensive interrelatedness,the evaluation rank of environment impacts of high-speed railway was determined.The numerical example shows that the model has vast prospect,which can not only expand the application areas of extension theory,but also change the traditional evaluation methods and provide new ideas and means for environmental impact evaluation of high-speed railway.
文摘Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the optimal ESS duration. The failure phenomena of ESS are modeled by mixed distribution, and optimal ESS duration is defined by maximizing life-cycle cost savings under the condition of meeting reliability requirement.
基金supported by the Research Base Construction Fund Support Program funded by Chonbuk National University in 2013the Mid-career Research Program(2016R1A2B4010080)through NRF Grant funded by MEST
文摘This paper considers an optimal sequential inspection schedule for a second-hand product after that the free nonrenewable warranty is expired. The length of warranty is prespecified and during the warranty period, the product is minimally repaired by the dealer when it fails. Following the expiration of the non-renewing warranty, the product is inspected and upgraded sequentially a fixed number of times at the expenses of the customer.At each inspection, the failure rate of the product is reduced proportionally so that the product is upgraded. The product is assumed to deteriorate as it ages and the replacement of the product occurs when a fixed number of inspections are rendered. In addition,the intervals between two successive inspections are assumed to decrease monotonically. The main objective of this paper is to determine the optimal improvement level to upgrade the product at each inspection so that the expected maintenance cost during the life cycle of the product is minimized from the perspective of the customer. Under the given cost structures, we derive an explicit formula to obtain the expected maintenance cost incurred during the life cycle of the product and discuss the method to find the optimal level of the improvement analytically in case the failure times follow the Weibull distribution. Numerical results are analyzed to observe the impact of relevant parameters on the optimal solution.
基金This research was supported by Agricultural Science and Technology Innovation Program of Chinese Academy of Agricultural Sciences.
文摘Background Apolygus lucorum is a worldwide omnivorous pest damaging a range of crops and causing great economic losses.Symbiotic bacteria living in insects play a key role in the nutrition,physiology,and behavior of hosts.Here,we present an experiment using Illumina HiSeq sequencing targeting the V3–V4 regions of bacteria’s 16S rRNA throughout the entire life cycle of A.lucorum.Results The first and second instar nymphs have the largest alpha diversity compared with other life stages of the insect.Bacterial phyla Proteobacteria(72.29%),Firmicutes(15.24%),Actinobacteria(7.76%)exhibit the largest relative abundance in all developmental stages.Erwinia(23.97%)and Lactococcus(10.62%)are the two genera with the high-est relative abundance.The relative abundance of Erwinia in the nymph stage is significantly greater than the adult stage,and the relative abundance of Lactococcus in 6-day-old and 9-day-old adult females is higher compared with adult males.Conclusions These results reveal that microbial community composition and relative abundance shift dynamically at different life stages,implying that different bacterial phyla and genera may have specific roles in specific life stages such as metabolism,nutrition absorption,detoxification,and reproduction.This study reveals for the first time the community composition and ecological dynamics of symbiotic bacteria throughout the life stages of A.lucorum,and thus may provide insight to new strategies for pest control.
基金Project(CDJZR10210009) supported by Central College General Fund for Natural Science of Chongqing City,China
文摘To quantify the energy consumption in the process of production, transportation and processing of energy carriers, the life cycle of building energy used can be divided into two phases： on-site phase and embodied phase. As for the embodied phase, with the data in existing statistic yearbook, the consumption items of energy production and transportation were investigated. And based on the life cycle theory, an embodied coefficient of energy carriers was proposed to quantify the embodied energy consumption. Moreover, a calculation method for the embodied coefficient of energy carriers was deduced using Leontief inverse matrix based on the existing data sources. With relevant data of 2005-2007 in China, the embodied coefficients in 2005-2007 were obtained, in which the values for natural gas and thermal power are around 1.3 and 3. l, respectively; while they are 1.03-1.08 for other selected energy carriers. In addition, it is also found that the consumption in the production and processing accounts for more than 75%.
文摘The serious competition environment of global marke t requests the enterprise to change traditional product development strategy and a dopt new theory in order to meet diverse customer needs while maintaining near m ass production efficiency, which is the main philosophy of mass customization. P roduct family design is research focus at present and also is the core technolog y of DFMC (design for mass customization). Firstly, this paper explores the fund amental issues of product family, such as concepts of modularity, commonality/di versity, product platform and product family architecture etc. We compare the te rminology between product family and object-oriented approach in the next step. Thirdly, this paper puts forwards one product family design methodology based o n product platform and under different phase of product life cycle constrains, f or example, functional, assembly and service etc. At the end section of this pap er, we applied, the object-oriented approach in above mentioned product family design methodology to realize the design process. In one word, this paper propos ed one product family design methodology based on object oriented approach and p roduct life cycle consideration, especially the conjointness of characteristic o f OOA and concepts of product family. The main property of OOA are encapsulation , inherence and polymorphism. Encapsulation can represent the module or building blocks of product family. Inherence can be extended to describe the modularity and commonality, and also be used to construct variant space. Alternative specif ic of product family architecture can be embodied with polymorphism. And fin aly, we give the future work contents. In order to derive the product platform a nd achieve modularity and commonality/diversity, interface management between bu ilding block is necessary. The question is how the OOA can be applied in interfa ce management to get our aim OOA is the basis of many information management sy stem, then the question is how to build one system to manage the information of product family and support mass customization The third question is how to deve lop one computer aided tool to facilitate the application of OOA for product fam ily design, even be used to category of design for mass customization.
