Xin’an coal mine, Henan Province, faces the risk of water inrush because 40% of the area of the coal mine is under the surface water of the Xiaolangdi reservoir. To forecast water disaster, an effective aquifuge and ...Xin’an coal mine, Henan Province, faces the risk of water inrush because 40% of the area of the coal mine is under the surface water of the Xiaolangdi reservoir. To forecast water disaster, an effective aquifuge and a limit of water infiltration were determined by rock-phase analysis and long term observations of surface water and groundwater. By field monitoring, as well as physical and numerical simulation experiments, we obtained data reflecting different heights of a water flow fractured zone (WFFZ) under different mining conditions, derived a formula to calculate this height and built a forecasting model with the aid of GIS. On the basis of these activities, the coal mine area was classified into three sub-areas with different potential of water inrush. In the end, our research results have been applied in and verified by industrial mining experiments at three working faces and we were able to present a successful example of coal mining under a large reservoir.展开更多
Coal mine safety is a complex system, which is controlled by a number of interrelated factors and is difficult to estimate. This paper proposes an index system of safety assessment based on correlated factors involved...Coal mine safety is a complex system, which is controlled by a number of interrelated factors and is difficult to estimate. This paper proposes an index system of safety assessment based on correlated factors involved in coal mining and a comprehensive evaluation model that combines the advantages of the AHP and a grey clustering method to guarantee the accuracy and objectivity of weight coefficients. First, we confirmed the weight of every index using the AHP, then did a general safety assessment by means of a grey clustering method. This model analyses the status of mining safety both qualitatively and quantitatively. It keeps management and technical groups informed of the situation of the coal production line in real time, which aids in making correct decisions based on practical safety issues. A case study in the application of the model is presented. The results show that the method is applicable and realistic with regard to the core of a coal mine's safety management. Consequently, the safe production of a mine and the awareness of advanced safe production management is accelerated.展开更多
Under deep and complex geological conditions,severe deformation occurs at intersection points of Y-type roadways with large cross sections during engineering projects in coal mines,especially at junction arches.Based ...Under deep and complex geological conditions,severe deformation occurs at intersection points of Y-type roadways with large cross sections during engineering projects in coal mines,especially at junction arches.Based on in-situ investigations and theoretical studies,we have summarized typical forms of destruction and identified high stress and unrestricted support at both sides of junction arch as its main causes.In this study,we also presented double-directional control bolt support technology for a large Y-type span intersection,applied to deep intersection engineering in the Jiahe Coal Mine,which has proved effective.展开更多
In this study we propose an analytical method based on orthogonal wavelet transforms for detecting harmonic noise and Electromagnetic Interference (EMI) from power supply systems and equipment in coal mines. The metho...In this study we propose an analytical method based on orthogonal wavelet transforms for detecting harmonic noise and Electromagnetic Interference (EMI) from power supply systems and equipment in coal mines. The method will separate interference from signals through wavelet packet decomposition and then accomplish wavelet packet synthesis towards decomposition results after filtering, to remove harmonic noise and electromagnetic interference. Detailed simulation experiments are presented to study power harmonics and Electrical Fast Transient Burst (EFT/B) interference and to validate the effectiveness of our proposed method. The experimental results show that the proposed method, suitable for mutant and non-stationary signal detection, can accurately analyze harmonic interference and EMI in coal mines, as well as establish EMI source models and perform underground Electromagnetic Compatibility (EMC) prediction analyses.展开更多
Accuracy of time-depth conversion in data processing of transient electromagnetic prospecting always affects the accu- rate positioning of water bodies in coal mines. In order to improve the accuracy of time-depth con...Accuracy of time-depth conversion in data processing of transient electromagnetic prospecting always affects the accu- rate positioning of water bodies in coal mines. In order to improve the accuracy of time-depth conversion, we established a mathe- matical model of time-depth conversion for a transient electromagnetic method based on the theory of "double smoke ring effect" of full space transient electromagnetic field transmission. Using a 3-layer as well as a 4-layer geo-electric model for roadway floors, we performed the time-depth conversion of theoretical curves of apparent resistance varying over time. In these curves, the depth corresponding to extreme value points is nearly the same as the depth of a geo-electric model. The position of water body deter- mined by our time-depth conversion method agrees well with the result of borehole drilling, indicating that the established time-depth conversion model can clearly improve the accuracy of spatial positioning of water bodies in coal mines.展开更多
To master theoretical calculation for dust removal efficiency of high pressure atomization in an underground coal mine, the corresponding atomization characteristics and dust removal efficiency were both comprehensive...To master theoretical calculation for dust removal efficiency of high pressure atomization in an underground coal mine, the corresponding atomization characteristics and dust removal efficiency were both comprehensively studied in theory by virtue of related theories of hydromechanics and aerosol.According to actual measurements of flow coefficients and atomization angles of X-type swirl nozzle,computational formula was derived for atomized particle sizes of such a nozzle in conjunction with relevant empirical equation. Moreover, a mathematical model for applying high pressure atomization to dust removal in underground coal mine was also established to deduce theoretical computation formula of fractional efficiency. Then, Matlab was adopted to portray the relation curve between fractional efficiency and influence factors. In addition, a theoretical formula was also set up for removal efficiency of respirable dust and total coal dust based on dust size and frequency distribution equations. In the end,impacts of dust characteristic parameters on various dust removal efficiencies were analyzed.展开更多
A monitoring system is an important guarantee of safety in a production mine. However, not all monitoring substations pass the electrical fast transient/burst （EFT/B） immunity test and the explosion-proof test simul...A monitoring system is an important guarantee of safety in a production mine. However, not all monitoring substations pass the electrical fast transient/burst （EFT/B） immunity test and the explosion-proof test simultaneously. To enhance the immunity, the values of capacitance and inductance should be increased, which are actually limited by coal mine explosion-proof standards. Hence, for the first time, an active filter was applied in an electromagnetic interference （EMI） output filter. As a result, the interference within 30 MHz clearly weakened, but the frequency spectrum had a wide range. An EMI input filter and ferrite beads were adopted to restrain higher frequency interference. An output interference spectrogram of the substation was obtained with an analyzer. The results indicate that the improved complex filtering markedly help to control interference. With the support of improved complex filtering and other enhancing immunity means about I/O ports, the substation managed to pass both the EFT/B immunity test and the explosion-proof test synchronously. We conclude that improved complex filtering is of vital importance in enhancing the electromagnetic compatibilitv （EMC） of the coal mine monitoring system.展开更多
ln-situ experiments were conducted to investigate the mechanical properties of the soil-rock mixture in the internal dump of the Shengli #1 Surface Coal Mine, China. Based on the experimental results, this study used ...ln-situ experiments were conducted to investigate the mechanical properties of the soil-rock mixture in the internal dump of the Shengli #1 Surface Coal Mine, China. Based on the experimental results, this study used comparative analysis and found that the shear strength of the soil-rock mixture in the dump was greater than the residual shear strength of the original rock. The results showed that the material presented in the dump as large blocks was the main factor affecting the strength of the soil-rock mixture, Numerical simulation was carried out for the analyses of three factors： different combinations of shear failure, rolling failure along with different large-block radius ratios, and mixture densities. The results illustrated that the cohesion and angle of internal friction of the soil-rock mixture are 12 kPa and 32.26°. However, in some cases the bench angle in the dump was controlled by a coupling relationship of rocks in the material. Finally, the stability of a soil slope showed a linear relationship with the large-block radius ratio and the bulk density.展开更多
From an analysis of the status of coal mine underground wireless communication, the application of UWB wireless communication system to underground coal mine is proposed. The basic composition of an UWB communication ...From an analysis of the status of coal mine underground wireless communication, the application of UWB wireless communication system to underground coal mine is proposed. The basic composition of an UWB communication system and application in underground coal mines are introduced. The analyses show that, because of the transmission power being non-limitted in underground coal mines, the use of UWB in coal mines cannot only realize wireless access services of short distance high rate application for transmission of video monitoring signals, but also realize wireless access services of long distance low rate applications for mobile telephones in underground coal mines and parameters of working conditions monitoring, etc. It is emphasized on the simulation of a TH-PPM UWB communication system with traditional underground broadband model and ground CM1, CM3 model. It is shown that the traditional underground broadband model and ground CM1, CM3 models are not applicable to the UWB communication system in underground coal mines. It is necessary to conduct research on the propagation characteristics of UWB in coal mine tunnels, given the characteristics of the underground environment and to find the appropriate UWB model for underground coal mines.展开更多
After a coal mine disaster,especially a gas and coal dust explosion,the space-restricted and unstructured underground terrain and explosive gas require coal mine rescue robots with good obstacle-surmounting performanc...After a coal mine disaster,especially a gas and coal dust explosion,the space-restricted and unstructured underground terrain and explosive gas require coal mine rescue robots with good obstacle-surmounting performance and explosion-proof capability. For this type of environment,we designed a mobile platform for a rocker-type coal mine rescue robot with four independent drive wheels.The composition and operational principles of the mobile platform are introduced,we discuss the flameproof design of the rocker assembly,as well as the operational principles and mechanical structure of the bevel gear differential and the main parameters are provided.Motion simulation of the differential function and condition of the robot running on virtual,uneven terrain is carried out with ADAMS.The simulation results show that the differential device can maintain the main body of the robot at an average angle between two rockers.The robot model has good operating performance.Experiments on terrain adaptability and surmounting obstacle performance of the robot prototype have been carried out.The results indicate that the prototype has good terrain adaptability and strong obstacle-surmounting performance.展开更多
Based on the transmitting theory of "smoke ring effect", the transient electromagnetism technique was used in coal mines to detect abnormal areas of aquiferous structures in both roofs and floors of coal sea...Based on the transmitting theory of "smoke ring effect", the transient electromagnetism technique was used in coal mines to detect abnormal areas of aquiferous structures in both roofs and floors of coal seams and in front of excavated roadways. Survey devices, working methods and techniques as well as data processing and interpretation are discussed systematically. In addition, the direction of mini-wireframe emission electromagnetic wave of the full space transient electromagnetism technique was verified by an underground borehole for water detection and drainage. The result indicates that this technique can detect both horizontal and vertical development rules of abnormal water bodies to a certain depth below the floor of coal seams and can also detect the abnormal, low resistance water bodies within a certain distance of roofs. Furthermore, it can detect such abnormal bodies in ahead of the excavated roadway front. Limited by the underground environment, the full space transient electromagnetism technique can detect to a depth of only 120 m or so.展开更多
The coal mine roof rating(CMRR) is a measure of roof quality or structure competency for bedded roof types typically of underground coal mines. The CMRR has been used widely in the US, South Africa,Canada and Australi...The coal mine roof rating(CMRR) is a measure of roof quality or structure competency for bedded roof types typically of underground coal mines. The CMRR has been used widely in the US, South Africa,Canada and Australia. In order to investigate the application of the CMRR system in Chinese coal mines,two coal mines in China located in Panjiang Coal Field in Guizhou Province were investigated. Field data were collected which is required to calculate the CMRR value based on underground exposure. The CMRR values of 11 locations in two coal mines were calculated. The investigations demonstrated that the chance of mine roof failure is very low if the CMRR value is more than 50, given adequate support is installed in mine. It was found that the CMRR guideline are useful to preliminarily investigate stability in Panjiang Coal Field mines.展开更多
This paper presents a new risk assessment methodology for coal mine excavated slopes. This new empirical-statistical slope.stability assessment m. ethodology （SSAM! is intended for use by geotechnical engineers at bo...This paper presents a new risk assessment methodology for coal mine excavated slopes. This new empirical-statistical slope.stability assessment m. ethodology （SSAM! is intended for use by geotechnical engineers at both the design review and operational stages of a mine＇s life to categonse the risk of an excavated coal mine slope. A likelihood of failure is determined using a new slope stability classification system for excavated coal mine slopes developed using a database of 119 intact and failed case studies sourced from open cut coal mines in Australia. Consequence of failure is based on slope height and stand-off distance at the toe of the excavated slope. Results are presented in a new risk matrix, with slope risk being divided into low, medium and high categories. The SSAM is put forward as a new risk assess- ment methodology to assess the potential for, and consequence of, excavated coal mine slope failure. Unlike existing classification systems, assumptions about the likely failure mode or mechanism are not required. Instead, the SSAM applies an approach which compares the conditions present within the exca- vated slope face, with the known past performance of slopes with similar geotechnical and geometrical conditions, to estimate the slope＇s propensity for failure. The SSAM is novel in that it considers the depo- sitional history of strata in an excavated slope and how this sequence affects slope stability. It is further novel in that it does not require explicit measurements of intact rock, rock mass and/or defect strength to rapidly calculate a slope＇s likelihood of failure and overall risk. Ratings can be determined entirely from visual observations of the excavated slope face. The new SSAM is designed to be used in conjunction with existing slope stability assessment tools.展开更多
3D visualization is one of major problems in “Digital Mine” theory and its technological research field. Through the observation of 3D geological models, spatial structural information, connected with the informatio...3D visualization is one of major problems in “Digital Mine” theory and its technological research field. Through the observation of 3D geological models, spatial structural information, connected with the information of production management hidden in geological data, could be detected. In order to meet the requirement of more efficient coal exploration, a case study of geological characters of the Daliuta Coal Mine is presented in which 3D visual models of the ground surface and geologic bodies are established on the basis of data models and data structures of 3D geology modeling. The main conclusions of this study are as follows: (1) Through analysis and organization of spatial discrete data, the drillhole database is designed with the data of the Daliuta mine; the connections amomg drillhole data are real- ized and displayed in a 3D environment. (2) Combining real data of the Daliuta mine, drillhole visualization is realized in a 3D environment by using the CoalMiner system. (3) The ground surface modeling of the Daliuta coal mine adopted a surface-data model and a TIN data structure. (4) 3D models of coal seams and rock formations of the Daliuta mine are established, which provide a method for the simulation of complex surfaces of geologic bodies. In the end, the models are applied to the Daliuta coal mine and the result shows that better geological effects are obtained.展开更多
Firstly, the early warning index system of coal mine safety production was given from four aspects as per- sonnel, environment, equipment and management. Then, improvement measures which are additional momentum method...Firstly, the early warning index system of coal mine safety production was given from four aspects as per- sonnel, environment, equipment and management. Then, improvement measures which are additional momentum method, adaptive learning rate, particle swarm optimization algorithm, variable weight method and asynchronous learning factor, are used to optimize BP neural network models. Further, the models are applied to a comparative study on coal mine safety warning instance. Results show that the identification precision of MPSO-BP network model is higher than GBP and PSO-BP model, and MPSO- BP model can not only effectively reduce the possibility of the network falling into a local minimum point, but also has fast convergence and high precision, which will provide the scientific basis for the forewarnin~ management of coal mine safetv production.展开更多
Spontaneous combustion is one of the greatest disasters in coal mines. Early recognition is important because it may be a potential inducement for other coalmine accidents. However, early recognition is difficult beca...Spontaneous combustion is one of the greatest disasters in coal mines. Early recognition is important because it may be a potential inducement for other coalmine accidents. However, early recognition is difficult because of the complexity of different coal mines. Fuzzy clustering has been proposed to incorporate the uncertainty of spontaneous combustion in coal mines and it can give a clear degree of classification of combustion. Because FCM clustering tends to become trapped in local minima, a new approach of fuzzy c-means clustering based on a genetic algorithm is there- fore proposed. Genetic algorithm is capable of locating optimal or near optimal solutions to difficult problems. It can be applied in many fields without first obtaining detailed knowledge about correlation. It is helpful in improving the effec- tiveness of fuzzy clustering in detecting spontaneous combustion. The effectiveness of the method is demonstrated by means of an experiment.展开更多
In order to study the evacuation behavior of miners during accidents,we analyzed the rational layout of a safe chamber,and improved evacuation efficiency.A visual model of evacuation was developed and used to simulate...In order to study the evacuation behavior of miners during accidents,we analyzed the rational layout of a safe chamber,and improved evacuation efficiency.A visual model of evacuation was developed and used to simulate the evacuation process of mines,given their special underground environments.In our simulation,the working faces of a coal mine and nearby tunnels were divided into 0.5 m×0.5 m grids to reflect the location of occupants and obstacles.Based on a "flow potential of the occupant",we determined the direction of movement and routes of occupants.In the model,evacuation speed changed as a function of crowd density,with an average speed of 1.30 m/s.The model also takes into account detection time of the disaster and the personnel response time.Evacuation time,exit flow rate and evacuation path were obtained by simulation.The results indicate that using simulation technology can present a more visual evacuation process and show the behavior of occupants.Our establishment of a mine safety evacuation system has merit as reference value.展开更多
In order to investigate chromium contamination of coal mine water, to analyze chromium leaching mechanism and to evaluate environment pollution potential of coal mine water, we perform site investigations, physical an...In order to investigate chromium contamination of coal mine water, to analyze chromium leaching mechanism and to evaluate environment pollution potential of coal mine water, we perform site investigations, physical and computer modeling in the Xuzhou-Datun coal mine district. The result of our test samples shows that chromium concentration was 9 μg/L in roof leachate and 3 μg/L in coal leachate. The host rock has a higher pollution potential than that of coal seams. Leaching experiments and XRD test results indicate that chromium is released from the process of transforming illite to kaolinite. The pH, pe and temperature of coal mine water affect the chromium leaching behavior. Modeling results suggest that the adsorption of adsorbents controls chromium concentration in coal mine water. The chromium adsorption ratio is quite low in both an acid and in an alkaline environment. Therefore, coal mine water has a high pollution potential. Under other conditions, chromium adsorption is stronger in a neutral water environment, so that chromium concentrations may be very low.展开更多
Puhe Coal Mine is a typical Tertiary coal in Shenbei mining area. With an increase in mining depth, tectonic stress field becomes more complex, leading to increased deformation and failure of the soft rock roadway. St...Puhe Coal Mine is a typical Tertiary coal in Shenbei mining area. With an increase in mining depth, tectonic stress field becomes more complex, leading to increased deformation and failure of the soft rock roadway. Stress becomes an important factor of mine safety and stability. This paper analyzes the distribution of the regional tectonic field, and determines the distribution of situ stress measurement through measuring the ground stress field in the main mining area level of Puhe Coal Mine using stress relief method. The acquired in situ stress data at different locations and depths provide a reference for the rational arrangement of the stop and mine roadway supporting design, which are of great significance for the efficient safety production of the mine.展开更多
A complex substrate consisting of fly ash, coal gangue and excess sludge was used as an experimental soil in pot culture experiments. Different soil compositions were tested by observing the growth of arbuscular mycor...A complex substrate consisting of fly ash, coal gangue and excess sludge was used as an experimental soil in pot culture experiments. Different soil compositions were tested by observing the growth of arbuscular mycorrhizal （AM） fungi inoculated white clover, rye grass or com. The biomass of the host plants, the mycorrhizal colonization （MC） rate and the mycorrhizal depen- dency （MD） were measured. The research addresses the preferable AMF-plant-substrate combination appropriate for restoration of coal mines. We used two inoculation methods： single-inoculation with Glomus versiforme or Glomus mosseae and a dual inocula- tion with both Ctv and Gm. The results show that G^m is the preferable fungi and that dual inoculation does not show advantages for the restoration of coal mines. White clover inoculated with AM fungi is the most suitable condition for restoration of coal mines. The best weight ratio of fly ash, coal gangue and excess sludge was found to be 20：60：20. The optimum treatment conditions of AMF-plant-activated-substrate are described.展开更多
基金Project 2007CB209400 supported by the National Basic Research Program of China
文摘Xin’an coal mine, Henan Province, faces the risk of water inrush because 40% of the area of the coal mine is under the surface water of the Xiaolangdi reservoir. To forecast water disaster, an effective aquifuge and a limit of water infiltration were determined by rock-phase analysis and long term observations of surface water and groundwater. By field monitoring, as well as physical and numerical simulation experiments, we obtained data reflecting different heights of a water flow fractured zone (WFFZ) under different mining conditions, derived a formula to calculate this height and built a forecasting model with the aid of GIS. On the basis of these activities, the coal mine area was classified into three sub-areas with different potential of water inrush. In the end, our research results have been applied in and verified by industrial mining experiments at three working faces and we were able to present a successful example of coal mining under a large reservoir.
文摘Coal mine safety is a complex system, which is controlled by a number of interrelated factors and is difficult to estimate. This paper proposes an index system of safety assessment based on correlated factors involved in coal mining and a comprehensive evaluation model that combines the advantages of the AHP and a grey clustering method to guarantee the accuracy and objectivity of weight coefficients. First, we confirmed the weight of every index using the AHP, then did a general safety assessment by means of a grey clustering method. This model analyses the status of mining safety both qualitatively and quantitatively. It keeps management and technical groups informed of the situation of the coal production line in real time, which aids in making correct decisions based on practical safety issues. A case study in the application of the model is presented. The results show that the method is applicable and realistic with regard to the core of a coal mine's safety management. Consequently, the safe production of a mine and the awareness of advanced safe production management is accelerated.
基金supported by the National Basic Research Program of China (No.2006CB202200)the Major Program of the National Natural Science Foundation of China (No.50490270)the Innovative Team Development Project of the Ministry of Education of China (No.IRT0656)
文摘Under deep and complex geological conditions,severe deformation occurs at intersection points of Y-type roadways with large cross sections during engineering projects in coal mines,especially at junction arches.Based on in-situ investigations and theoretical studies,we have summarized typical forms of destruction and identified high stress and unrestricted support at both sides of junction arch as its main causes.In this study,we also presented double-directional control bolt support technology for a large Y-type span intersection,applied to deep intersection engineering in the Jiahe Coal Mine,which has proved effective.
基金the financial support for our work by the Doctoral Foundation of Ministry of Education of China (No.200802900008)
文摘In this study we propose an analytical method based on orthogonal wavelet transforms for detecting harmonic noise and Electromagnetic Interference (EMI) from power supply systems and equipment in coal mines. The method will separate interference from signals through wavelet packet decomposition and then accomplish wavelet packet synthesis towards decomposition results after filtering, to remove harmonic noise and electromagnetic interference. Detailed simulation experiments are presented to study power harmonics and Electrical Fast Transient Burst (EFT/B) interference and to validate the effectiveness of our proposed method. The experimental results show that the proposed method, suitable for mutant and non-stationary signal detection, can accurately analyze harmonic interference and EMI in coal mines, as well as establish EMI source models and perform underground Electromagnetic Compatibility (EMC) prediction analyses.
基金Project 2007CB209400 supported by the National Basic Research Program of China
文摘Accuracy of time-depth conversion in data processing of transient electromagnetic prospecting always affects the accu- rate positioning of water bodies in coal mines. In order to improve the accuracy of time-depth conversion, we established a mathe- matical model of time-depth conversion for a transient electromagnetic method based on the theory of "double smoke ring effect" of full space transient electromagnetic field transmission. Using a 3-layer as well as a 4-layer geo-electric model for roadway floors, we performed the time-depth conversion of theoretical curves of apparent resistance varying over time. In these curves, the depth corresponding to extreme value points is nearly the same as the depth of a geo-electric model. The position of water body deter- mined by our time-depth conversion method agrees well with the result of borehole drilling, indicating that the established time-depth conversion model can clearly improve the accuracy of spatial positioning of water bodies in coal mines.
基金Financial provided by the National Natural Science Foundation of China (Nos. 51574123 and U1361118)the China Postdoctoral Science Foundation (No. 2015M 582118)
文摘To master theoretical calculation for dust removal efficiency of high pressure atomization in an underground coal mine, the corresponding atomization characteristics and dust removal efficiency were both comprehensively studied in theory by virtue of related theories of hydromechanics and aerosol.According to actual measurements of flow coefficients and atomization angles of X-type swirl nozzle,computational formula was derived for atomized particle sizes of such a nozzle in conjunction with relevant empirical equation. Moreover, a mathematical model for applying high pressure atomization to dust removal in underground coal mine was also established to deduce theoretical computation formula of fractional efficiency. Then, Matlab was adopted to portray the relation curve between fractional efficiency and influence factors. In addition, a theoretical formula was also set up for removal efficiency of respirable dust and total coal dust based on dust size and frequency distribution equations. In the end,impacts of dust characteristic parameters on various dust removal efficiencies were analyzed.
基金Project 50674093 supported by the National Natural Science Foundation of China
文摘A monitoring system is an important guarantee of safety in a production mine. However, not all monitoring substations pass the electrical fast transient/burst （EFT/B） immunity test and the explosion-proof test simultaneously. To enhance the immunity, the values of capacitance and inductance should be increased, which are actually limited by coal mine explosion-proof standards. Hence, for the first time, an active filter was applied in an electromagnetic interference （EMI） output filter. As a result, the interference within 30 MHz clearly weakened, but the frequency spectrum had a wide range. An EMI input filter and ferrite beads were adopted to restrain higher frequency interference. An output interference spectrogram of the substation was obtained with an analyzer. The results indicate that the improved complex filtering markedly help to control interference. With the support of improved complex filtering and other enhancing immunity means about I/O ports, the substation managed to pass both the EFT/B immunity test and the explosion-proof test synchronously. We conclude that improved complex filtering is of vital importance in enhancing the electromagnetic compatibilitv （EMC） of the coal mine monitoring system.
基金financially supported by the Key Program of the National Natural Science Foundation of China(No.51574222)National Natural Science Foundation of China(No.51034005)+1 种基金Program for New Century Excellent Talents in University of China(No.NCET-13-1022)National Key Research and Development Plan of China(No.2016YFC0501103)
文摘ln-situ experiments were conducted to investigate the mechanical properties of the soil-rock mixture in the internal dump of the Shengli #1 Surface Coal Mine, China. Based on the experimental results, this study used comparative analysis and found that the shear strength of the soil-rock mixture in the dump was greater than the residual shear strength of the original rock. The results showed that the material presented in the dump as large blocks was the main factor affecting the strength of the soil-rock mixture, Numerical simulation was carried out for the analyses of three factors： different combinations of shear failure, rolling failure along with different large-block radius ratios, and mixture densities. The results illustrated that the cohesion and angle of internal friction of the soil-rock mixture are 12 kPa and 32.26°. However, in some cases the bench angle in the dump was controlled by a coupling relationship of rocks in the material. Finally, the stability of a soil slope showed a linear relationship with the large-block radius ratio and the bulk density.
基金Project OC4501 supported by the Scientific Research Fund of China University of Mining & Technology
文摘From an analysis of the status of coal mine underground wireless communication, the application of UWB wireless communication system to underground coal mine is proposed. The basic composition of an UWB communication system and application in underground coal mines are introduced. The analyses show that, because of the transmission power being non-limitted in underground coal mines, the use of UWB in coal mines cannot only realize wireless access services of short distance high rate application for transmission of video monitoring signals, but also realize wireless access services of long distance low rate applications for mobile telephones in underground coal mines and parameters of working conditions monitoring, etc. It is emphasized on the simulation of a TH-PPM UWB communication system with traditional underground broadband model and ground CM1, CM3 model. It is shown that the traditional underground broadband model and ground CM1, CM3 models are not applicable to the UWB communication system in underground coal mines. It is necessary to conduct research on the propagation characteristics of UWB in coal mine tunnels, given the characteristics of the underground environment and to find the appropriate UWB model for underground coal mines.
基金the National Hi-tech Research and Development Program of China for its financial support(No.2006AA04Z208).
文摘After a coal mine disaster,especially a gas and coal dust explosion,the space-restricted and unstructured underground terrain and explosive gas require coal mine rescue robots with good obstacle-surmounting performance and explosion-proof capability. For this type of environment,we designed a mobile platform for a rocker-type coal mine rescue robot with four independent drive wheels.The composition and operational principles of the mobile platform are introduced,we discuss the flameproof design of the rocker assembly,as well as the operational principles and mechanical structure of the bevel gear differential and the main parameters are provided.Motion simulation of the differential function and condition of the robot running on virtual,uneven terrain is carried out with ADAMS.The simulation results show that the differential device can maintain the main body of the robot at an average angle between two rockers.The robot model has good operating performance.Experiments on terrain adaptability and surmounting obstacle performance of the robot prototype have been carried out.The results indicate that the prototype has good terrain adaptability and strong obstacle-surmounting performance.
文摘Based on the transmitting theory of "smoke ring effect", the transient electromagnetism technique was used in coal mines to detect abnormal areas of aquiferous structures in both roofs and floors of coal seams and in front of excavated roadways. Survey devices, working methods and techniques as well as data processing and interpretation are discussed systematically. In addition, the direction of mini-wireframe emission electromagnetic wave of the full space transient electromagnetism technique was verified by an underground borehole for water detection and drainage. The result indicates that this technique can detect both horizontal and vertical development rules of abnormal water bodies to a certain depth below the floor of coal seams and can also detect the abnormal, low resistance water bodies within a certain distance of roofs. Furthermore, it can detect such abnormal bodies in ahead of the excavated roadway front. Limited by the underground environment, the full space transient electromagnetism technique can detect to a depth of only 120 m or so.
基金supported by the Science Foundation of Guizhou Province of China (No. 20177283)the Special Program for Academic Foster and Innovation research of Guizhou University of China (No. 20175788)
文摘The coal mine roof rating(CMRR) is a measure of roof quality or structure competency for bedded roof types typically of underground coal mines. The CMRR has been used widely in the US, South Africa,Canada and Australia. In order to investigate the application of the CMRR system in Chinese coal mines,two coal mines in China located in Panjiang Coal Field in Guizhou Province were investigated. Field data were collected which is required to calculate the CMRR value based on underground exposure. The CMRR values of 11 locations in two coal mines were calculated. The investigations demonstrated that the chance of mine roof failure is very low if the CMRR value is more than 50, given adequate support is installed in mine. It was found that the CMRR guideline are useful to preliminarily investigate stability in Panjiang Coal Field mines.
基金funded by the Australian Coal Association Research Program(ACARP)
文摘This paper presents a new risk assessment methodology for coal mine excavated slopes. This new empirical-statistical slope.stability assessment m. ethodology （SSAM! is intended for use by geotechnical engineers at both the design review and operational stages of a mine＇s life to categonse the risk of an excavated coal mine slope. A likelihood of failure is determined using a new slope stability classification system for excavated coal mine slopes developed using a database of 119 intact and failed case studies sourced from open cut coal mines in Australia. Consequence of failure is based on slope height and stand-off distance at the toe of the excavated slope. Results are presented in a new risk matrix, with slope risk being divided into low, medium and high categories. The SSAM is put forward as a new risk assess- ment methodology to assess the potential for, and consequence of, excavated coal mine slope failure. Unlike existing classification systems, assumptions about the likely failure mode or mechanism are not required. Instead, the SSAM applies an approach which compares the conditions present within the exca- vated slope face, with the known past performance of slopes with similar geotechnical and geometrical conditions, to estimate the slope＇s propensity for failure. The SSAM is novel in that it considers the depo- sitional history of strata in an excavated slope and how this sequence affects slope stability. It is further novel in that it does not require explicit measurements of intact rock, rock mass and/or defect strength to rapidly calculate a slope＇s likelihood of failure and overall risk. Ratings can be determined entirely from visual observations of the excavated slope face. The new SSAM is designed to be used in conjunction with existing slope stability assessment tools.
基金Project 2002CB412601 supported by Chinese Ministry of Science and Technology
文摘3D visualization is one of major problems in “Digital Mine” theory and its technological research field. Through the observation of 3D geological models, spatial structural information, connected with the information of production management hidden in geological data, could be detected. In order to meet the requirement of more efficient coal exploration, a case study of geological characters of the Daliuta Coal Mine is presented in which 3D visual models of the ground surface and geologic bodies are established on the basis of data models and data structures of 3D geology modeling. The main conclusions of this study are as follows: (1) Through analysis and organization of spatial discrete data, the drillhole database is designed with the data of the Daliuta mine; the connections amomg drillhole data are real- ized and displayed in a 3D environment. (2) Combining real data of the Daliuta mine, drillhole visualization is realized in a 3D environment by using the CoalMiner system. (3) The ground surface modeling of the Daliuta coal mine adopted a surface-data model and a TIN data structure. (4) 3D models of coal seams and rock formations of the Daliuta mine are established, which provide a method for the simulation of complex surfaces of geologic bodies. In the end, the models are applied to the Daliuta coal mine and the result shows that better geological effects are obtained.
文摘Firstly, the early warning index system of coal mine safety production was given from four aspects as per- sonnel, environment, equipment and management. Then, improvement measures which are additional momentum method, adaptive learning rate, particle swarm optimization algorithm, variable weight method and asynchronous learning factor, are used to optimize BP neural network models. Further, the models are applied to a comparative study on coal mine safety warning instance. Results show that the identification precision of MPSO-BP network model is higher than GBP and PSO-BP model, and MPSO- BP model can not only effectively reduce the possibility of the network falling into a local minimum point, but also has fast convergence and high precision, which will provide the scientific basis for the forewarnin~ management of coal mine safetv production.
基金Project 20050290010 supported by the Doctoral Foundation of Chinese Education Ministry
文摘Spontaneous combustion is one of the greatest disasters in coal mines. Early recognition is important because it may be a potential inducement for other coalmine accidents. However, early recognition is difficult because of the complexity of different coal mines. Fuzzy clustering has been proposed to incorporate the uncertainty of spontaneous combustion in coal mines and it can give a clear degree of classification of combustion. Because FCM clustering tends to become trapped in local minima, a new approach of fuzzy c-means clustering based on a genetic algorithm is there- fore proposed. Genetic algorithm is capable of locating optimal or near optimal solutions to difficult problems. It can be applied in many fields without first obtaining detailed knowledge about correlation. It is helpful in improving the effec- tiveness of fuzzy clustering in detecting spontaneous combustion. The effectiveness of the method is demonstrated by means of an experiment.
文摘In order to study the evacuation behavior of miners during accidents,we analyzed the rational layout of a safe chamber,and improved evacuation efficiency.A visual model of evacuation was developed and used to simulate the evacuation process of mines,given their special underground environments.In our simulation,the working faces of a coal mine and nearby tunnels were divided into 0.5 m×0.5 m grids to reflect the location of occupants and obstacles.Based on a "flow potential of the occupant",we determined the direction of movement and routes of occupants.In the model,evacuation speed changed as a function of crowd density,with an average speed of 1.30 m/s.The model also takes into account detection time of the disaster and the personnel response time.Evacuation time,exit flow rate and evacuation path were obtained by simulation.The results indicate that using simulation technology can present a more visual evacuation process and show the behavior of occupants.Our establishment of a mine safety evacuation system has merit as reference value.
基金Our study was funded by the National Natural Science Foundation of China (Nos.40572095, 40730422 and 40772102)the Six Projects Sponsoring Talent Summits of Jiangsu Province and the Jiangsu Province Plan of Post-Graduate Student Inno-vation (No.CX07B-050z)
文摘In order to investigate chromium contamination of coal mine water, to analyze chromium leaching mechanism and to evaluate environment pollution potential of coal mine water, we perform site investigations, physical and computer modeling in the Xuzhou-Datun coal mine district. The result of our test samples shows that chromium concentration was 9 μg/L in roof leachate and 3 μg/L in coal leachate. The host rock has a higher pollution potential than that of coal seams. Leaching experiments and XRD test results indicate that chromium is released from the process of transforming illite to kaolinite. The pH, pe and temperature of coal mine water affect the chromium leaching behavior. Modeling results suggest that the adsorption of adsorbents controls chromium concentration in coal mine water. The chromium adsorption ratio is quite low in both an acid and in an alkaline environment. Therefore, coal mine water has a high pollution potential. Under other conditions, chromium adsorption is stronger in a neutral water environment, so that chromium concentrations may be very low.
基金supported by the National Natural Science Foundation of China (No. 41040027)the Central University Basic Research Fund (No. 2009QL06)
文摘Puhe Coal Mine is a typical Tertiary coal in Shenbei mining area. With an increase in mining depth, tectonic stress field becomes more complex, leading to increased deformation and failure of the soft rock roadway. Stress becomes an important factor of mine safety and stability. This paper analyzes the distribution of the regional tectonic field, and determines the distribution of situ stress measurement through measuring the ground stress field in the main mining area level of Puhe Coal Mine using stress relief method. The acquired in situ stress data at different locations and depths provide a reference for the rational arrangement of the stop and mine roadway supporting design, which are of great significance for the efficient safety production of the mine.
基金Project 2007024 supported by the Environmental Science and Technology Fund of the Environmental Protection Department of Jiangsu Province
文摘A complex substrate consisting of fly ash, coal gangue and excess sludge was used as an experimental soil in pot culture experiments. Different soil compositions were tested by observing the growth of arbuscular mycorrhizal （AM） fungi inoculated white clover, rye grass or com. The biomass of the host plants, the mycorrhizal colonization （MC） rate and the mycorrhizal depen- dency （MD） were measured. The research addresses the preferable AMF-plant-substrate combination appropriate for restoration of coal mines. We used two inoculation methods： single-inoculation with Glomus versiforme or Glomus mosseae and a dual inocula- tion with both Ctv and Gm. The results show that G^m is the preferable fungi and that dual inoculation does not show advantages for the restoration of coal mines. White clover inoculated with AM fungi is the most suitable condition for restoration of coal mines. The best weight ratio of fly ash, coal gangue and excess sludge was found to be 20：60：20. The optimum treatment conditions of AMF-plant-activated-substrate are described.
