This study investigates the differences in microstructural control between cryogenic forging combined with pre-deformation(PCF)and traditional thermal forging(TTF)for 7050 aluminum forgings intended for aerospace appl...This study investigates the differences in microstructural control between cryogenic forging combined with pre-deformation(PCF)and traditional thermal forging(TTF)for 7050 aluminum forgings intended for aerospace applications.The PCF process,utilizing cryogenic deformation,significantly refines the coarse grains at the surface of the forgings,resulting in a finer and more uniform microstructure,thereby effectively addressing the issue of surface coarse grains associated with traditional methods.The findings indicate that the PCF process can accumulate higher stored energy,facilitating static recrystallization(SRX)during subsequent heat treatment and enhancing the microstructural uniformity.Utilizing various analytical techniques,including optical microscopy(OM),electron backscatter diffraction(EBSD),and transmission electron microscopy(TEM).This study reveals the superiority of the PCF process in terms of strain accumulation,dislocation density,and grain refinement.In conclusion,this method offers advantages in enhancing the performance and microstructural uniformity of 7050 aluminum forgings,presenting new opportunities for applications in the aluminum forging industry.展开更多
Ultra-large plate forgings are foundation of heavy machinery,but many parts of the type cannot be made by conventional technologies due to the characters of extreme manufacturing in terms of size and quality requireme...Ultra-large plate forgings are foundation of heavy machinery,but many parts of the type cannot be made by conventional technologies due to the characters of extreme manufacturing in terms of size and quality requirements.This paper introduced a systematically method called cylinder unfolding method(CUM)for producing large plate forgings,by using a serial of operations including“splitting”,“unfolding”,and“flattening”of a thick cylinder obtained from saddle forging.The technological route of CUM was presented in detail with an example of plate forging with the horizontal sizes of 6100 mm and thickness of 300 mm.The deformation features of saddle forging for fabricating transitional cylinders were analyzed,and then the subsequent handling steps including splitting,unfolding and flattening of the cylinder,as well as the auxiliary processing,were addressed.The practice proved that CUM can provide an efficient way for manufacturing ultra-large plate forgings and meet the strict requirements in geometry and mechanical performance,without highly increasing the investments of forming equipment and tooling.展开更多
The mechanism of forming defects in 2024. 7075 series aluminium alloy forgings has been studiedby means of metallography. EDAX. SEM etc. The defects are divided into two types by their appearance.needle-shaped and fla...The mechanism of forming defects in 2024. 7075 series aluminium alloy forgings has been studiedby means of metallography. EDAX. SEM etc. The defects are divided into two types by their appearance.needle-shaped and flake-shaped. The mechanism of them forming is discussed. It has been testified that thedefects result from hydrogen or oxide film. The defects can be prevented by controlling the hydrogen contentin the melt and keeping oxide film from involving.展开更多
The effect of forging on the microstructure and texture evolution of a high Nb containing Ti-45Al-7Nb-0.3W(at.%)alloy was investigated by X-ray diffractometer(XRD),scanning electron microscopy(SEM),and transmission el...The effect of forging on the microstructure and texture evolution of a high Nb containing Ti-45Al-7Nb-0.3W(at.%)alloy was investigated by X-ray diffractometer(XRD),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).The results show that the as-cast alloy is mainly composed of α_(2)/γ lamellar colonies with a mean size of 70μm,but the hot-forged pancake displays a near duplex microstructure(DP).Kinking and bending of lamellar colonies,deformation twinning and dynamic recrystallization(DRX)occur during hot forging.Meanwhile,dense dislocations in theβphase after forging suggest that the high-temperature β phase with a disordered structure is favorable for improving the hot-workability of the alloy.Unlike the common TiAl casting texture,the solidification process of the investigated as-cast alloy with high Nb content is completely via the β phase region,resulting in the formation of a<110>γ fiber texture where the<110>γ aligns parallel to the heat-flow direction.In comparison,the relatively strong<001>and weak<302>texture components in the as-forged alloy are attributed to the deformation twinning.After annealing,static recrystallization occurs at the twin boundary and intersections,which weakens the deformation texture.展开更多
基金Project(2021GK1040) supported by the Major Projects of Scientific and Technology Innovation of Hunan Province,ChinaProjects(52375398,52171018) supported by the National Natural Science Foundation of China+1 种基金Project(Kfkt2023-09) supported by the Open Research Fund of State Key Laboratory of Precision Manufacturing for Extreme Service Performance,Central South University,ChinaProject(E2021203059) supported by the Natural Science Foundation of Hebei Province,China。
文摘This study investigates the differences in microstructural control between cryogenic forging combined with pre-deformation(PCF)and traditional thermal forging(TTF)for 7050 aluminum forgings intended for aerospace applications.The PCF process,utilizing cryogenic deformation,significantly refines the coarse grains at the surface of the forgings,resulting in a finer and more uniform microstructure,thereby effectively addressing the issue of surface coarse grains associated with traditional methods.The findings indicate that the PCF process can accumulate higher stored energy,facilitating static recrystallization(SRX)during subsequent heat treatment and enhancing the microstructural uniformity.Utilizing various analytical techniques,including optical microscopy(OM),electron backscatter diffraction(EBSD),and transmission electron microscopy(TEM).This study reveals the superiority of the PCF process in terms of strain accumulation,dislocation density,and grain refinement.In conclusion,this method offers advantages in enhancing the performance and microstructural uniformity of 7050 aluminum forgings,presenting new opportunities for applications in the aluminum forging industry.
基金Project(cstc2018jcyjAX0159)supported by the Natural Science Foundation of Chongqing,ChinaProject(51575066)supported by the National Natural Science Foundation of China。
文摘Ultra-large plate forgings are foundation of heavy machinery,but many parts of the type cannot be made by conventional technologies due to the characters of extreme manufacturing in terms of size and quality requirements.This paper introduced a systematically method called cylinder unfolding method(CUM)for producing large plate forgings,by using a serial of operations including“splitting”,“unfolding”,and“flattening”of a thick cylinder obtained from saddle forging.The technological route of CUM was presented in detail with an example of plate forging with the horizontal sizes of 6100 mm and thickness of 300 mm.The deformation features of saddle forging for fabricating transitional cylinders were analyzed,and then the subsequent handling steps including splitting,unfolding and flattening of the cylinder,as well as the auxiliary processing,were addressed.The practice proved that CUM can provide an efficient way for manufacturing ultra-large plate forgings and meet the strict requirements in geometry and mechanical performance,without highly increasing the investments of forming equipment and tooling.
文摘The mechanism of forming defects in 2024. 7075 series aluminium alloy forgings has been studiedby means of metallography. EDAX. SEM etc. The defects are divided into two types by their appearance.needle-shaped and flake-shaped. The mechanism of them forming is discussed. It has been testified that thedefects result from hydrogen or oxide film. The defects can be prevented by controlling the hydrogen contentin the melt and keeping oxide film from involving.
基金Projects(52274402,52174381)supported by the National Natural Science Foundation of China。
文摘The effect of forging on the microstructure and texture evolution of a high Nb containing Ti-45Al-7Nb-0.3W(at.%)alloy was investigated by X-ray diffractometer(XRD),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).The results show that the as-cast alloy is mainly composed of α_(2)/γ lamellar colonies with a mean size of 70μm,but the hot-forged pancake displays a near duplex microstructure(DP).Kinking and bending of lamellar colonies,deformation twinning and dynamic recrystallization(DRX)occur during hot forging.Meanwhile,dense dislocations in theβphase after forging suggest that the high-temperature β phase with a disordered structure is favorable for improving the hot-workability of the alloy.Unlike the common TiAl casting texture,the solidification process of the investigated as-cast alloy with high Nb content is completely via the β phase region,resulting in the formation of a<110>γ fiber texture where the<110>γ aligns parallel to the heat-flow direction.In comparison,the relatively strong<001>and weak<302>texture components in the as-forged alloy are attributed to the deformation twinning.After annealing,static recrystallization occurs at the twin boundary and intersections,which weakens the deformation texture.
