Solution processability significantly advances the development of highly-efficient perovskite solar cells.However,the precursor solution tends to undergo irreversible degradation reactions,impairing the device perform...Solution processability significantly advances the development of highly-efficient perovskite solar cells.However,the precursor solution tends to undergo irreversible degradation reactions,impairing the device performance and reproducibility.Here,we utilize a reductive natural amino acid,Nacetylcysteine(NALC),to stabilize the precursor solution for printable carbon-based hole-conductorfree mesoscopic perovskite solar cells.We find that I_(2) can be generated in the aged solution containing methylammonium iodide(MI) in an inert atmosphere and speed up the MA-FA^(+)(formamidinium) reaction which produces large-size cations and hinders the formation of perovskite phase.NALC effectively stabilizes the precursor via its sulfhydryl group which reduces I_(2) back to I^(-)and provides H^(+).The NALC-stabilized precursor which is aged for 1440 h leads to devices with a power conversion efficiency equivalent to 98% of that for devices prepared with the fresh precursor.Furthermore,NALC improves the device power conversion efficiency from 16.16% to 18.41% along with enhanced stability under atmospheric conditions by modifying grain boundaries in perovskite films and reducing associated defects.展开更多
All-inorganic CsPbIBr_(2) perovskite has attracted widespread attention in photovoltaic and other optoelectronic devices because of its superior thermal stability.However,the deposition of high-quality solutionprocess...All-inorganic CsPbIBr_(2) perovskite has attracted widespread attention in photovoltaic and other optoelectronic devices because of its superior thermal stability.However,the deposition of high-quality solutionprocessed CsPbIBr_(2) perovskite films with large thicknesses remains challenging.Here,we develop a triple-component precursor(TCP) by employing lead bromide,lead iodide,and cesium bromide,to replace the most commonly used double-component precursor(DCP) consisting of lead bromide and cesium iodide.Remarkably,the TCP system significantly increases the solution concentration to 1.3 M,leading to a larger film thickness(~390 nm) and enhanced light absorption.The resultant CsPbIBr_(2) films were evaluated in planar n-i-p structured solar cells,which exhibit a considerably higher optimal photocurrent density of 11.50 mA cm^(-2) in comparison to that of DCP-based devices(10.69 mA cm^(-2)).By adopting an organic surface passivator,the maximum device efficiency using TCP is further boosted to a record efficiency of 12.8% for CsPbIBr_(2) perovskite solar cells.展开更多
The characteristics of rock instability precursors and the principal stress direction are very crucial for the prevention of geological disasters.This study investigated the qualitative relationship between rock insta...The characteristics of rock instability precursors and the principal stress direction are very crucial for the prevention of geological disasters.This study investigated the qualitative relationship between rock instability precursors and principal stress direction through wave velocity in rock acoustic emission(AE)experiments.Results show that the wave velocity variation exhibits obvious anisotropic characteristics in 0%–20%and 60%–90%of peak strength due to the differences of stress-induced microcrack types.The amplitude of wave velocity variation is related to the azimuth and position of wave propagation path,which indicates that the principal stress direction can be identified by the anisotropic characteristics of wave velocity variations.Furthermore,the experiments also demonstrate that the AE event rate and wave velocity show quiet and stable variations in the elastic stage of rock samples,while they present a trend of active and unstable variations in the plastic stage.It implies that both the AE event rate and wave velocity are effective monitoring parameters for rock instability.The anisotropic characteristics of the wave velocity variation and AE event rate are beneficial complements for identifying the rock instability precursors and determining the principal stress direction,which provides a new analysis method for stability monitoring in practical rock engineering.展开更多
The aging process of pure copper precursors and copper-zinc binary precursorswere studied by XRD, TG-DTG and TPR techniques. The catalytic activity and stability of CuO/ZnOwere tested using fixed-bed flow reactor, and...The aging process of pure copper precursors and copper-zinc binary precursorswere studied by XRD, TG-DTG and TPR techniques. The catalytic activity and stability of CuO/ZnOwere tested using fixed-bed flow reactor, and the physical properties of the catalysts and Cuspecies were characterized with N_2 adsorption and N_2O passivation method, respectively. For theCu-Zn binary system prepared at the precipitating condition of pH=8.0 and temperature=80℃, theinitial phase was a mixture of copper nitrate hydroxide Cu_2(NO_3)(OH)_3, georgeite and hydrozinciteZn_5(CO_3)_2(OH)_6. By increasing the duration of its aging time, the phase of Cu_2(NO_3)(OH)_2first transited to georgeite, and then interdiffused into Zn_5(CO_3)_2(OH)_6 and resulted in two newphases: rosasite (Cu,Zn)_2CO_3(OH)_2 and au-richalcite (Zn,Cu)_5(CO_3)_2(OH)_6. The former phasewas much easier to be formed than the latter one, while the latter phase was more responsible forthe activity of methanol synthesis than the former one. It is found that the composition andstructure of the precursors altered obviously after the colour transition point. The experimentalresults showed that methanol synthesis is a structure-sensitive catalytic reaction.展开更多
SAPO-11 molecular sieves were synthesized using silica sol, hydrophilic fumed silica, and tetraethyl orthosilicate（TEOS） as silicon precursors. Their physicochemical properties were characterized using XRD,SEM, nitr...SAPO-11 molecular sieves were synthesized using silica sol, hydrophilic fumed silica, and tetraethyl orthosilicate（TEOS） as silicon precursors. Their physicochemical properties were characterized using XRD,SEM, nitrogen adsorption-desorption, Py-IR, NH;-TPD, EDS, and;Al,;P,;Si MAS NMR techniques. The catalytic performance was assessed in the hydroisomerization of n-octane. The results showed that the silicon precursors influenced the physicochemical properties and catalytic performance of SAPO-11. SAPO-11 synthesized using hydrophilic fumed silica as silicon precursor showed higher silicon distribution and had more medium acid sites. SAPO-11 synthesized using TEOS as silicon precursor had more silicon content, but more silicon islands formed in its framework. The depolymerization of silicon precursors might affect the silicon content and distribution in SAPO-11. In the hydroisomerization of n-octane, the catalytic activity strongly depended on the number of medium acid sites instead of the number of total acid sites.SAPO-11 synthesized using hydrophilic fumed silica as silicon precursor exhibited higher catalytic activity than the other samples because it has more medium acid sites.展开更多
A homogeneous better-dispersed ultrathin nanosheets（ca. 5 nm） of cobalt-nickel layered double hydroxides（LDH） supported on nickel foam scaffold was synthesized using controllable electrodeposition approach for hig...A homogeneous better-dispersed ultrathin nanosheets（ca. 5 nm） of cobalt-nickel layered double hydroxides（LDH） supported on nickel foam scaffold was synthesized using controllable electrodeposition approach for high efficiency electrode materials of new supercapacitor. The morphology and electrochemical performances of the samples can be controlled by adjusting the precursor ratio, i.e., Ni（OAc）2/Co（NO3）2 molar ratio in the electrodeposition approach. With the increase of this molar ratio, the electrochemical performances give a volcano trend. When the optimized molar ratio is 0.64/0.36, the hybrid delivered a high specific capacitance of 1587.5 F g-1 at a current density of 0.5 A g-1, with good rate capability（1155 F g-1 was retained even at 10 A g-1） and a robust recycle stability（remaining 91.5% after 1000 cycles at 5 A g-1）. The good performance could be attributed to the enlarged interlayer spacing, ultrathin nanosheets and synergistic effects between Co（OH）2 and Ni（OH）2. Furthermore, an asymmetric supercapacitor with a high energy density of 34.5 Wh kg-1 at 425 W kg-1 and excellent cycling stability of 85.4% after 5000 charge-discharge cycles at 2 A g-1 was fabricated. We believe that this fantabulous new electrode material would have encouraging applications in electrochemical energy storage and a wide readership.展开更多
Cobalt （Co） thermal or plasma enhanced atomic layer deposition （PE-ALD） was investigated using a novel metal organic precursor, Co（MeCp）2, and NH3 or H2 or their plasma as a reactant. The growth characteristics,...Cobalt （Co） thermal or plasma enhanced atomic layer deposition （PE-ALD） was investigated using a novel metal organic precursor, Co（MeCp）2, and NH3 or H2 or their plasma as a reactant. The growth characteristics, electrical and microstructural properties were investigated. Especially, PE-ALD produced Co thin films at low growth temperature down to 100℃. Interestingly, the low temperature growth of Co films showed the formation of columnar structure at substrate temperature below 300℃. The growth characteristics and films properties of PE-ALD Co using bis（η-methylcyclopentadienyl） Co（II） （Co（MeCp）2） was compared with those of PE-ALD Co using other Cp based metal organic precursors, bis-cyclopentadienyl cobalt （II） （CoCp2） and cyclopentadienyl isopropyl acetamidinato-cobalt （Co（CpAMD））.展开更多
In this study, using Taxus cuspidata as a raw material, we obtained stable high-yielding cell lines by subculturing and quantified paclitaxel content using ultra- sonic extraction combined with TLC-UV spectrophotom- e...In this study, using Taxus cuspidata as a raw material, we obtained stable high-yielding cell lines by subculturing and quantified paclitaxel content using ultra- sonic extraction combined with TLC-UV spectrophotom- etry. In single factor and multiple factors tests to optimize design and study the effects of elicitors, precursors, and metabolic inhibitors on paclitaxel production by Taxus cuspidata cells, paclitaxel production reached 4.32 mg/L when 100 μmol/L methyl jasmonate, 20 mg/L salicylic acid, 400 mg/L phenylalanine and 2 mg/L gibberellin （GA3） were added to the culture medium of suspension cells. When adding metabolic adjustment factors on the 7th day of culture, extra- and intracellular paclitaxel production was the highest at 4.855 mg/L, paclitaxel release rate was 10.48 %, fresh mass and paclitaxel production of cell increased, respectively, by 6.08 and 11.57 %. By controlling the anabolism of paclitaxel, paclitaxel yield was significantly improved.展开更多
Chilled chicken has become the mainstream of chicken consumption.In order to explore the effect of post-mortem aging on water-soluble flavor precursors of chicken,pH,adenosine triphosphate(ATP)degradation,flavor nucle...Chilled chicken has become the mainstream of chicken consumption.In order to explore the effect of post-mortem aging on water-soluble flavor precursors of chicken,pH,adenosine triphosphate(ATP)degradation,flavor nucleosides,free amino acids and water-soluble low molecular weight peptides were determined using Qingyuan partridge yellow-feathered broilers as material during 0-4℃ post-mortem aging in 48 h.The results showed that the pH value fell to the limit pH 5.64(4 h)in chicken breast and 6.21(3 h)in thigh.Regardless of chicken breast or thigh,ATP dropped rapidly within 3 h.It was found that the K-value in chicken thigh was the lowest at 2 h indicating the freshness was the best.Considering the equivalent umami concentration(EUC),the value at 3 h and 4 h was relatively high,but the corresponding electronic tongue umami value was not high,which further showed that the water-soluble low molecular taste peptide played an important role on the post-mortem aging process.Combined with cluster analysis and partial least squares discriminant analysis(PLS-DA),it was preliminarily inferred that the optimal time for chilled chicken during 0-4℃ post-mortem aging was 2 h,which could provide a theoretical basis for the further processing of fresh chicken.展开更多
The MoS_2 catalysts were prepared from various molybdate precursors including inorganic and organic molybdate compounds. The sulfidation degree and morphology of active phases of MoS_2 activated by various molybdate p...The MoS_2 catalysts were prepared from various molybdate precursors including inorganic and organic molybdate compounds. The sulfidation degree and morphology of active phases of MoS_2 activated by various molybdate precursors in H_2S/H_2 stream at different temperatures were studied by X-ray photoelectron spectroscopy(XPS) and high-resolution transmission electron microscopy(HRTEM). The organic molybdate precursors lead to MoS_2 catalysts with higher sulfidation degree and smaller active phases to demonstrate higher catalytic activity during hydrodesulfurizaiton(HDS) of 4,6-DMDBT.展开更多
In molten salt reactors(MSRs),the liquid fuel salt circulates through the primary loop and a part of the delayed neutron precursors(DNPs)decays outside the reactor core.To model and analyze the flow field effect of DN...In molten salt reactors(MSRs),the liquid fuel salt circulates through the primary loop and a part of the delayed neutron precursors(DNPs)decays outside the reactor core.To model and analyze the flow field effect of DNPs in channel-type liquid-fueled MSRs,a three-dimensional space-time dynamics code,named ThorCORE3D,that couples neutronics,core thermalhydraulics,and a molten salt loop system was developed and validated with the Molten Salt Reactor Experiment(MSRE)benchmarks.The effects of external loop recirculation time,fuel flow rate,and core flow field distribution on the delayed neutron fraction loss of MSRE at steadystate were modeled and simulated using the ThorCORE3D code.Then,the flow field effect of the DNPs on the system responses of the MSRE in the reactivity insertion transient under different initial conditions was analyzed systematically for the channel-type liquid-fueled MSRs.The results indicate that the flow field condition has a significant effect on the steady-state delayed neutron fractions and will further affect the transient power and temperature responses of the reactor system.The analysis results for the effect of the DNP flow field can provide important references for the design optimization and safety analysis of liquid-fueled MSRs.展开更多
Advanced glycation end products(AGEs)might pose health risks,and processing and storage could accelerate the generation of AGEs in meat.However,limited few reports indicated the changes of AGEs contents in meat during...Advanced glycation end products(AGEs)might pose health risks,and processing and storage could accelerate the generation of AGEs in meat.However,limited few reports indicated the changes of AGEs contents in meat during storage.In this study,the aim is to investigate the oxidation and precursors and their roles in the formation of N^(ε)-carboxymethyl-lysine(CML)in raw and cooked chicken meat after post-mortem ageing and storage.As post-mortem ageing and storage time increased,the CML content in cooked chicken breast significantly increased from 1.81 mg/kg to 2.00 mg/kg during 0-6 h,and then decreased from 2.00 mg/kg to 1.80 mg/kg during 6 h-1 day,finally increased again during 1-7 days,while the CML contents of raw and cooked leg significantly and continuously increased from 1.78 mg/kg to 2.08 mg/kg.Furthermore,CML was extremely positively correlated with fat oxidation(R^(2)=0.793,P<0.01),protein oxidation(R^(2)=0.917,P<0.01)and glyoxal(R^(2)=0.678,P<0.05),and was negatively correlated with lysine(R^(2)=0.536,P<0.05).No significant correlation was observed between the Schiff base and CML.展开更多
The molecular structures of metal precursors in the impregnating solution were designed so as to prepare efficient Ni Mo/Al_2O_3 hydrodesulfurization(HDS) catalysts. At first, five typical impregnating solutions were ...The molecular structures of metal precursors in the impregnating solution were designed so as to prepare efficient Ni Mo/Al_2O_3 hydrodesulfurization(HDS) catalysts. At first, five typical impregnating solutions were designed; the existing metal precursors, such as [Mo4(citrate)2O11]^(4-)-like, [P2Mo18O62]^(6-)-like and [P2Mo5O23]^(6-)-like species in the solutions were confirmed by laser Raman spectroscopy(LRS). The UV-Vis spectra results indicated that the solutions containing both phosphoric acid and citric acid could change the existing form of nickel species. Five corresponding Ni Mo/Al_2O_3 catalysts were prepared by the incipient wetness impregnation method. The LRS analysis results of dried catalysts showed that the above metal precursors could be partly retained on alumina support after impregnation and drying, although the interface reaction between different metal precursors and alumina support unavoidably took place. Then the catalysts were sulfided and characterized by N2 physisorption, TEM and XPS analyses. The results showed that different metal precursors in impregnating solution could mainly result in the difference in both the morphology of(Ni)Mo S2 slabs and the promoting effect of Ni species. The catalyst prepared mainly with [P2Mo5O23]^(6-)-like species used as precursors exhibited worse dispersion of(Ni)Mo S2 slabs and lower ratio of Ni–Mo–S active phases than the one with [Mo4(citrate)2O11]^(4-)-like species. Promisingly, the catalyst prepared with co-existing [Mo4(citrate)2O11]^(4-)-like, [P2Mo18O62]^(6-)-like and [P2Mo5O23]^(6-)-like species showed better hydrodesulfurization activity for 4,6-DMDBT thanks to its more well-dispersed Ni–Mo–S active phases.展开更多
Aiming to improve the reactive adsorption desulfurization（RADS） performances of Ni/Zn O adsorbents,ZnxAly（OH）2（CO3）z·x H2 O precursor is synthesized by coprecipitation of Zn2＋,AlO-2,and CO2-3; the Zn OZn6A...Aiming to improve the reactive adsorption desulfurization（RADS） performances of Ni/Zn O adsorbents,ZnxAly（OH）2（CO3）z·x H2 O precursor is synthesized by coprecipitation of Zn2＋,AlO-2,and CO2-3; the Zn OZn6Al2O9 composite oxides are obtained by the calcination of ZnxAly（OH）2（CO3）z·x H2 O precursor,and the Ni/Zn O-Zn6Al2O9（6.0 wt% Ni O） adsorbents are prepared by wetness impregnation method. The phase,acid strength,acid type and quantity,morphology,and thermal properties were characterized by X-ray diffraction,temperature-programmed desorption of ammonia,pyridine-adsorbed infrared spectrum,high-resolution transmission electron microscopy,and Thermo Gravimetry-Derivative Thermo Gravimetry（TG-DTG）,respectively. The breakthrough sulfur capacities of six adsorbents are between 34.2 and 47.9 mg/gcat. The kinetic studies indicated that the active energy of RADS（49.4 k J/mol） could reach nano-sized Zn O,the particle size of is about 12.0 nm. All the excellent RADS performances can be due to the high SBET. Also,there are some extents of aromatization reactions that occur,which can be contributed to the B？nsted acid rooted in Zn6Al2O9 composite oxide,and the octane number of products can be preserved well.展开更多
MWW zeolites is an important catalyst in petrochemical industry.However,the efficient preparation of Mww zeolites still faces challenges,and the origin of influential factors for regulating its structure properties al...MWW zeolites is an important catalyst in petrochemical industry.However,the efficient preparation of Mww zeolites still faces challenges,and the origin of influential factors for regulating its structure properties also remains obscure.Herein,we designed a nanoscale amorphous silica-alumina species denoted as active precursor(APS),and adopt the APS in the HMI mixture to synthesize MCM-22 zeolite(APS-MWW)successfully.To reveal the distinctive role of APS in promoting the crystallization of MWW zeolites,two crystal materials(ITQ-1 and MCM-22)and one mother liquor(ML)as seeds to synthesize three types of MWW zeolites.Typically,when adding APS in the synthetic mixture,the HMI amount was reduced to less than a quarter and crystallization time was reduced to 36 h.APS-MWW sample provides a smaller particle size(2-4μm)and thinner stacked layer thickness(5-20 nm).Synchrotron radiation Small Angle X-ray Scattering(SAXS)shows each seed has a different impact on the species'fractal structure and size distribution in the mixture,which is highly related to the nucleation and growth of MWW zeolites.APS shows a large number of 6 membered ring(MR)structure units which play a sig-nificant role in boosting the rapid nucleation and growth of APS-MwW zeolite.Among the synthesized MWW zeolites,the APS-MWW performs the highest ethylbenzene yield in the alkylation reaction of benzene-ethylene,which is attributed to its moderate flake thickness,appropriate texture properties and more external surface acidity.The results will provide a new perspective for producing MwW-types zeolites by using the available and effective active precursor.展开更多
Objective:To exploretheserum-freecultureconditionsfordifferentiatingmouseembryonicstemcells(ES cells)intoneuralprecursorcells(NPC)andcomparetheeffectsof humanembryonicfibroblasts(HEF)as thefeederlayer of ES withthatof...Objective:To exploretheserum-freecultureconditionsfordifferentiatingmouseembryonicstemcells(ES cells)intoneuralprecursorcells(NPC)andcomparetheeffectsof humanembryonicfibroblasts(HEF)as thefeederlayer of ES withthatof mouseembryonicfibroblasts(MEF)in vitro.Methods:MouseES cellswereculturedin or notin feederlayer cellsmediumcontainingor notleukemiainhibitoryfactorto suppresstheirdifferentiation.Immunocytochemicalmethod was usedto identifyNPCby detectingnestinantigenandalkalinephosphatase.Results: TheES cellsculturedin HEF werepositiveto alkalinephosphatase.Serum-freemediumallowedthedifferentiationof ES cellsintoNPC.Conclusion:HEFcouldreplaceMEFandkeeptheundifferentiatedconditionof ES cellswithmorebenefits.NPCof highpuritycould be culturedfromEScellsby serum-freeculturemethod.展开更多
FeTi_1-O_2（= 0.00,0.05,0.10） nanocomposites are synthesized using a sol-gel method involving an ethanol solvent in the presence of ethylene glycol as the stabilizer,and acetic acid as the chemical reagent.Their stru...FeTi_1-O_2（= 0.00,0.05,0.10） nanocomposites are synthesized using a sol-gel method involving an ethanol solvent in the presence of ethylene glycol as the stabilizer,and acetic acid as the chemical reagent.Their structural and optical analyses are studied to reveal their physicochemical properties.Using the x-ray diffractometer（XRD）analysis,the size of the nanoparticles（NPs） is found to be 18-32 nm,where the size of the NPs decreases down to 18 nm when Fe impurity of up to 10% is added,whereas their structure remains unchanged.The results also indicate that the structure of the NPs is tetragonal in the anatase phase.The Fourier transform infrared spectroscopy analysis suggests the presence of a vibration bond（Ti-O） in the sample.The photoluminescence analysis indicates that the diffusion of Fe^（3＋） ions into the TiO_2 matrix results in a decreasing electron-hole recombination,and increases the photocatalytic properties,where the best efficiency appears at an impurity of10%.The UV-diffuse reflection spectroscopy analysis indicates that with the elevation of iron impurity,the band gap value decreases from 3.47 eV for the pure sample to 2.95 eV for the 10 mol% Fe-doped TiO_2 NPs.展开更多
Current study reports a rapid one-pot non-hydrolytic condition in the synthesis of Sn O2QDs nanopowder using tin(II) stearate(Sn(St)2) as environmentally-benign organometallic precursor,which is an unprecedentedly emp...Current study reports a rapid one-pot non-hydrolytic condition in the synthesis of Sn O2QDs nanopowder using tin(II) stearate(Sn(St)2) as environmentally-benign organometallic precursor,which is an unprecedentedly employed-compound in preceding Sn O2nanopowder productions.The as-synthesized Sn O2QDs that are hydrophobic can be easily transferred from organic solvent to aqueous solution through a robust ligand exchange method.The stearate-capping ligands on the surface of QDs can be replaced by beta-cyclodextrin(β-CD) and eventually render the QDs highly water soluble,which ultimately make it exhibit bi-functionality for different liquid medium applications.Structural characterizations reveal that the bi-functional QDs are indeed well-matched with the standard rutile Sn O2cassiterite phase without the presence of any impurities.The QDs can be interchangeably used as photocatalyst for both aqueous and non-aqueous phase,where it shows significant enhancement of hydrogen gas production as compared to that of commercial Sn O2nanopowder.展开更多
We have constructed a retroviral vector mediated mammalian cell expression system of the capsid precursor protein of foot-and-mouth disease virus(FMDV).The recombinant retroviral vector pBABEpuro-P1-2A-EGFP was constr...We have constructed a retroviral vector mediated mammalian cell expression system of the capsid precursor protein of foot-and-mouth disease virus(FMDV).The recombinant retroviral vector pBABEpuro-P1-2A-EGFP was constructed by sequentially inserting capsid precursor protein gene(P1) of FMDV and enhanced green fluorescent protein gene(EGFP) into pBABEpuro.The recombinant retroviral vector and the pVSV-G plasmid were co-transfected into packaging cells(GP2-293) by liposomemediated transduction to produce the pseudovirus.The pseudovirus was used to infect BHK-21 cells and resistant cells were screened with puromycin.Green fluorescent proteins were observed by fluorescence microscopy and expression of the capsid precursor protein gene of FMDV was detected by indirect immunofluorescence.The recombinant retroviral vector pBABEpuro-P1-2A-EGFP was constructed successfully.The capsid precursor protein of FMDV and green fluorescent protein were expressed in BHK-21 cells.The mammalian cell expression system for the capsid precursor protein of FMDV has been constructed successfully,which lays the foundation of development of a FMDV subunit vaccine.展开更多
In this study, BaTiO3 （BTO）-doped YBCO films are prepared on LaA103 （100） single-crystal substrates by metal- organic decomposition （MOD） using trifluoroacetate （TFA） precursor solutions. The critical current ...In this study, BaTiO3 （BTO）-doped YBCO films are prepared on LaA103 （100） single-crystal substrates by metal- organic decomposition （MOD） using trifluoroacetate （TFA） precursor solutions. The critical current density （Jc） of BTO/YBCO film is as high as 10 MA/cm2 （77 K, 0 T）. The BTO peak is found in the X-ray diffraction （XRD） pattern of a final YBCO superconductivity film. Moreover, a comprehensive study of the precursor evolution is conducted mainly by X-ray analysis and μ-Raman spectroscopy. It is found that the TFA begins to decompose at the beginning of the thermal process, and then further decomposes as temperature increases, and at 700 ℃ BTO nanoparticles begin to appear. It sug- gests that the YBCO film embedded with BTO nanoparticles, whose critical current density （Jc） is enhanced, is successfully prepared by an easily scalable chemical solution deposition technique.展开更多
基金financial support from the National Natural Science Foundation of China(grant nos.52172198,51902117,and 91733301)。
文摘Solution processability significantly advances the development of highly-efficient perovskite solar cells.However,the precursor solution tends to undergo irreversible degradation reactions,impairing the device performance and reproducibility.Here,we utilize a reductive natural amino acid,Nacetylcysteine(NALC),to stabilize the precursor solution for printable carbon-based hole-conductorfree mesoscopic perovskite solar cells.We find that I_(2) can be generated in the aged solution containing methylammonium iodide(MI) in an inert atmosphere and speed up the MA-FA^(+)(formamidinium) reaction which produces large-size cations and hinders the formation of perovskite phase.NALC effectively stabilizes the precursor via its sulfhydryl group which reduces I_(2) back to I^(-)and provides H^(+).The NALC-stabilized precursor which is aged for 1440 h leads to devices with a power conversion efficiency equivalent to 98% of that for devices prepared with the fresh precursor.Furthermore,NALC improves the device power conversion efficiency from 16.16% to 18.41% along with enhanced stability under atmospheric conditions by modifying grain boundaries in perovskite films and reducing associated defects.
基金The authors acknowledge the financial support by the National Natural Science Foundation of China(52161145408 and 21975038)the Research and Innovation Team Project of Dalian University of Technology(DUT2022TB10)+2 种基金the Fundamental Research Funds for the Central Universities(DUT22QN213)the Innovation Technology Fund(MRP/040/21X)the Green Technology Fund(GTF202020164)for their financial support。
文摘All-inorganic CsPbIBr_(2) perovskite has attracted widespread attention in photovoltaic and other optoelectronic devices because of its superior thermal stability.However,the deposition of high-quality solutionprocessed CsPbIBr_(2) perovskite films with large thicknesses remains challenging.Here,we develop a triple-component precursor(TCP) by employing lead bromide,lead iodide,and cesium bromide,to replace the most commonly used double-component precursor(DCP) consisting of lead bromide and cesium iodide.Remarkably,the TCP system significantly increases the solution concentration to 1.3 M,leading to a larger film thickness(~390 nm) and enhanced light absorption.The resultant CsPbIBr_(2) films were evaluated in planar n-i-p structured solar cells,which exhibit a considerably higher optimal photocurrent density of 11.50 mA cm^(-2) in comparison to that of DCP-based devices(10.69 mA cm^(-2)).By adopting an organic surface passivator,the maximum device efficiency using TCP is further boosted to a record efficiency of 12.8% for CsPbIBr_(2) perovskite solar cells.
基金the financial support from the Fundamental Research Funds for the Central Universities(No.2282020cxqd055)the National Science Foundation for Excellent Young Scholars of China(No.51822407)+1 种基金the Natural Science Foundation of China(Nos.51774327 and 51504288)the Fundamental Research Funds for the Central Universities of Central South University(No.2021zzts0862)。
文摘The characteristics of rock instability precursors and the principal stress direction are very crucial for the prevention of geological disasters.This study investigated the qualitative relationship between rock instability precursors and principal stress direction through wave velocity in rock acoustic emission(AE)experiments.Results show that the wave velocity variation exhibits obvious anisotropic characteristics in 0%–20%and 60%–90%of peak strength due to the differences of stress-induced microcrack types.The amplitude of wave velocity variation is related to the azimuth and position of wave propagation path,which indicates that the principal stress direction can be identified by the anisotropic characteristics of wave velocity variations.Furthermore,the experiments also demonstrate that the AE event rate and wave velocity show quiet and stable variations in the elastic stage of rock samples,while they present a trend of active and unstable variations in the plastic stage.It implies that both the AE event rate and wave velocity are effective monitoring parameters for rock instability.The anisotropic characteristics of the wave velocity variation and AE event rate are beneficial complements for identifying the rock instability precursors and determining the principal stress direction,which provides a new analysis method for stability monitoring in practical rock engineering.
文摘The aging process of pure copper precursors and copper-zinc binary precursorswere studied by XRD, TG-DTG and TPR techniques. The catalytic activity and stability of CuO/ZnOwere tested using fixed-bed flow reactor, and the physical properties of the catalysts and Cuspecies were characterized with N_2 adsorption and N_2O passivation method, respectively. For theCu-Zn binary system prepared at the precipitating condition of pH=8.0 and temperature=80℃, theinitial phase was a mixture of copper nitrate hydroxide Cu_2(NO_3)(OH)_3, georgeite and hydrozinciteZn_5(CO_3)_2(OH)_6. By increasing the duration of its aging time, the phase of Cu_2(NO_3)(OH)_2first transited to georgeite, and then interdiffused into Zn_5(CO_3)_2(OH)_6 and resulted in two newphases: rosasite (Cu,Zn)_2CO_3(OH)_2 and au-richalcite (Zn,Cu)_5(CO_3)_2(OH)_6. The former phasewas much easier to be formed than the latter one, while the latter phase was more responsible forthe activity of methanol synthesis than the former one. It is found that the composition andstructure of the precursors altered obviously after the colour transition point. The experimentalresults showed that methanol synthesis is a structure-sensitive catalytic reaction.
基金supported by the National Natural Science Foundation,China(no.21676300)
文摘SAPO-11 molecular sieves were synthesized using silica sol, hydrophilic fumed silica, and tetraethyl orthosilicate（TEOS） as silicon precursors. Their physicochemical properties were characterized using XRD,SEM, nitrogen adsorption-desorption, Py-IR, NH;-TPD, EDS, and;Al,;P,;Si MAS NMR techniques. The catalytic performance was assessed in the hydroisomerization of n-octane. The results showed that the silicon precursors influenced the physicochemical properties and catalytic performance of SAPO-11. SAPO-11 synthesized using hydrophilic fumed silica as silicon precursor showed higher silicon distribution and had more medium acid sites. SAPO-11 synthesized using TEOS as silicon precursor had more silicon content, but more silicon islands formed in its framework. The depolymerization of silicon precursors might affect the silicon content and distribution in SAPO-11. In the hydroisomerization of n-octane, the catalytic activity strongly depended on the number of medium acid sites instead of the number of total acid sites.SAPO-11 synthesized using hydrophilic fumed silica as silicon precursor exhibited higher catalytic activity than the other samples because it has more medium acid sites.
基金supported by the National Natural Science Foundation of China (21476145)
文摘A homogeneous better-dispersed ultrathin nanosheets（ca. 5 nm） of cobalt-nickel layered double hydroxides（LDH） supported on nickel foam scaffold was synthesized using controllable electrodeposition approach for high efficiency electrode materials of new supercapacitor. The morphology and electrochemical performances of the samples can be controlled by adjusting the precursor ratio, i.e., Ni（OAc）2/Co（NO3）2 molar ratio in the electrodeposition approach. With the increase of this molar ratio, the electrochemical performances give a volcano trend. When the optimized molar ratio is 0.64/0.36, the hybrid delivered a high specific capacitance of 1587.5 F g-1 at a current density of 0.5 A g-1, with good rate capability（1155 F g-1 was retained even at 10 A g-1） and a robust recycle stability（remaining 91.5% after 1000 cycles at 5 A g-1）. The good performance could be attributed to the enlarged interlayer spacing, ultrathin nanosheets and synergistic effects between Co（OH）2 and Ni（OH）2. Furthermore, an asymmetric supercapacitor with a high energy density of 34.5 Wh kg-1 at 425 W kg-1 and excellent cycling stability of 85.4% after 5000 charge-discharge cycles at 2 A g-1 was fabricated. We believe that this fantabulous new electrode material would have encouraging applications in electrochemical energy storage and a wide readership.
基金supported by the Technology Innovation Program Industrial Strategic Technology Development Program(10035430)Development of reliable fine-pitch metallization technologies funded by the Ministry of Knowledge Economy MKE,Korea.The synchrotron radiation XRD analysis was performed at Pohang Light Source beam line 3C2
文摘Cobalt （Co） thermal or plasma enhanced atomic layer deposition （PE-ALD） was investigated using a novel metal organic precursor, Co（MeCp）2, and NH3 or H2 or their plasma as a reactant. The growth characteristics, electrical and microstructural properties were investigated. Especially, PE-ALD produced Co thin films at low growth temperature down to 100℃. Interestingly, the low temperature growth of Co films showed the formation of columnar structure at substrate temperature below 300℃. The growth characteristics and films properties of PE-ALD Co using bis（η-methylcyclopentadienyl） Co（II） （Co（MeCp）2） was compared with those of PE-ALD Co using other Cp based metal organic precursors, bis-cyclopentadienyl cobalt （II） （CoCp2） and cyclopentadienyl isopropyl acetamidinato-cobalt （Co（CpAMD））.
基金supported by development plan project during ‘‘the 12th Five Year Plan’’ Nation Science and Technology in rural area(No.2012AA10A506-04 and No.2013AA103005-04)Changchun City science and technology development program(No.2014174)Changchun City science and technology support program(No.2014NK002)
文摘In this study, using Taxus cuspidata as a raw material, we obtained stable high-yielding cell lines by subculturing and quantified paclitaxel content using ultra- sonic extraction combined with TLC-UV spectrophotom- etry. In single factor and multiple factors tests to optimize design and study the effects of elicitors, precursors, and metabolic inhibitors on paclitaxel production by Taxus cuspidata cells, paclitaxel production reached 4.32 mg/L when 100 μmol/L methyl jasmonate, 20 mg/L salicylic acid, 400 mg/L phenylalanine and 2 mg/L gibberellin （GA3） were added to the culture medium of suspension cells. When adding metabolic adjustment factors on the 7th day of culture, extra- and intracellular paclitaxel production was the highest at 4.855 mg/L, paclitaxel release rate was 10.48 %, fresh mass and paclitaxel production of cell increased, respectively, by 6.08 and 11.57 %. By controlling the anabolism of paclitaxel, paclitaxel yield was significantly improved.
基金supported by China Agriculture Research System of MOF and MARA (CARS-41)Wens Fifth Five R&D Major Project (WENS-2020-1-ZDZX-007)
文摘Chilled chicken has become the mainstream of chicken consumption.In order to explore the effect of post-mortem aging on water-soluble flavor precursors of chicken,pH,adenosine triphosphate(ATP)degradation,flavor nucleosides,free amino acids and water-soluble low molecular weight peptides were determined using Qingyuan partridge yellow-feathered broilers as material during 0-4℃ post-mortem aging in 48 h.The results showed that the pH value fell to the limit pH 5.64(4 h)in chicken breast and 6.21(3 h)in thigh.Regardless of chicken breast or thigh,ATP dropped rapidly within 3 h.It was found that the K-value in chicken thigh was the lowest at 2 h indicating the freshness was the best.Considering the equivalent umami concentration(EUC),the value at 3 h and 4 h was relatively high,but the corresponding electronic tongue umami value was not high,which further showed that the water-soluble low molecular taste peptide played an important role on the post-mortem aging process.Combined with cluster analysis and partial least squares discriminant analysis(PLS-DA),it was preliminarily inferred that the optimal time for chilled chicken during 0-4℃ post-mortem aging was 2 h,which could provide a theoretical basis for the further processing of fresh chicken.
基金the financial support by the National Key Basic Research Development Program "973" Project (2012CB224800) of China
文摘The MoS_2 catalysts were prepared from various molybdate precursors including inorganic and organic molybdate compounds. The sulfidation degree and morphology of active phases of MoS_2 activated by various molybdate precursors in H_2S/H_2 stream at different temperatures were studied by X-ray photoelectron spectroscopy(XPS) and high-resolution transmission electron microscopy(HRTEM). The organic molybdate precursors lead to MoS_2 catalysts with higher sulfidation degree and smaller active phases to demonstrate higher catalytic activity during hydrodesulfurizaiton(HDS) of 4,6-DMDBT.
基金supported by Strategic Pilot Science and Technology Project of Chinese Academy of Sciences (No. XD02001005)
文摘In molten salt reactors(MSRs),the liquid fuel salt circulates through the primary loop and a part of the delayed neutron precursors(DNPs)decays outside the reactor core.To model and analyze the flow field effect of DNPs in channel-type liquid-fueled MSRs,a three-dimensional space-time dynamics code,named ThorCORE3D,that couples neutronics,core thermalhydraulics,and a molten salt loop system was developed and validated with the Molten Salt Reactor Experiment(MSRE)benchmarks.The effects of external loop recirculation time,fuel flow rate,and core flow field distribution on the delayed neutron fraction loss of MSRE at steadystate were modeled and simulated using the ThorCORE3D code.Then,the flow field effect of the DNPs on the system responses of the MSRE in the reactivity insertion transient under different initial conditions was analyzed systematically for the channel-type liquid-fueled MSRs.The results indicate that the flow field condition has a significant effect on the steady-state delayed neutron fractions and will further affect the transient power and temperature responses of the reactor system.The analysis results for the effect of the DNP flow field can provide important references for the design optimization and safety analysis of liquid-fueled MSRs.
基金supported by China Agriculture Research System(CARS-41-Z06)。
文摘Advanced glycation end products(AGEs)might pose health risks,and processing and storage could accelerate the generation of AGEs in meat.However,limited few reports indicated the changes of AGEs contents in meat during storage.In this study,the aim is to investigate the oxidation and precursors and their roles in the formation of N^(ε)-carboxymethyl-lysine(CML)in raw and cooked chicken meat after post-mortem ageing and storage.As post-mortem ageing and storage time increased,the CML content in cooked chicken breast significantly increased from 1.81 mg/kg to 2.00 mg/kg during 0-6 h,and then decreased from 2.00 mg/kg to 1.80 mg/kg during 6 h-1 day,finally increased again during 1-7 days,while the CML contents of raw and cooked leg significantly and continuously increased from 1.78 mg/kg to 2.08 mg/kg.Furthermore,CML was extremely positively correlated with fat oxidation(R^(2)=0.793,P<0.01),protein oxidation(R^(2)=0.917,P<0.01)and glyoxal(R^(2)=0.678,P<0.05),and was negatively correlated with lysine(R^(2)=0.536,P<0.05).No significant correlation was observed between the Schiff base and CML.
基金supported by the National Key Basic Research Program of China(973 Program,2012CB224802)the SINOPEC project(No.114013)
文摘The molecular structures of metal precursors in the impregnating solution were designed so as to prepare efficient Ni Mo/Al_2O_3 hydrodesulfurization(HDS) catalysts. At first, five typical impregnating solutions were designed; the existing metal precursors, such as [Mo4(citrate)2O11]^(4-)-like, [P2Mo18O62]^(6-)-like and [P2Mo5O23]^(6-)-like species in the solutions were confirmed by laser Raman spectroscopy(LRS). The UV-Vis spectra results indicated that the solutions containing both phosphoric acid and citric acid could change the existing form of nickel species. Five corresponding Ni Mo/Al_2O_3 catalysts were prepared by the incipient wetness impregnation method. The LRS analysis results of dried catalysts showed that the above metal precursors could be partly retained on alumina support after impregnation and drying, although the interface reaction between different metal precursors and alumina support unavoidably took place. Then the catalysts were sulfided and characterized by N2 physisorption, TEM and XPS analyses. The results showed that different metal precursors in impregnating solution could mainly result in the difference in both the morphology of(Ni)Mo S2 slabs and the promoting effect of Ni species. The catalyst prepared mainly with [P2Mo5O23]^(6-)-like species used as precursors exhibited worse dispersion of(Ni)Mo S2 slabs and lower ratio of Ni–Mo–S active phases than the one with [Mo4(citrate)2O11]^(4-)-like species. Promisingly, the catalyst prepared with co-existing [Mo4(citrate)2O11]^(4-)-like, [P2Mo18O62]^(6-)-like and [P2Mo5O23]^(6-)-like species showed better hydrodesulfurization activity for 4,6-DMDBT thanks to its more well-dispersed Ni–Mo–S active phases.
文摘Aiming to improve the reactive adsorption desulfurization（RADS） performances of Ni/Zn O adsorbents,ZnxAly（OH）2（CO3）z·x H2 O precursor is synthesized by coprecipitation of Zn2＋,AlO-2,and CO2-3; the Zn OZn6Al2O9 composite oxides are obtained by the calcination of ZnxAly（OH）2（CO3）z·x H2 O precursor,and the Ni/Zn O-Zn6Al2O9（6.0 wt% Ni O） adsorbents are prepared by wetness impregnation method. The phase,acid strength,acid type and quantity,morphology,and thermal properties were characterized by X-ray diffraction,temperature-programmed desorption of ammonia,pyridine-adsorbed infrared spectrum,high-resolution transmission electron microscopy,and Thermo Gravimetry-Derivative Thermo Gravimetry（TG-DTG）,respectively. The breakthrough sulfur capacities of six adsorbents are between 34.2 and 47.9 mg/gcat. The kinetic studies indicated that the active energy of RADS（49.4 k J/mol） could reach nano-sized Zn O,the particle size of is about 12.0 nm. All the excellent RADS performances can be due to the high SBET. Also,there are some extents of aromatization reactions that occur,which can be contributed to the B？nsted acid rooted in Zn6Al2O9 composite oxide,and the octane number of products can be preserved well.
基金supported by the National Natural Science Foundation of China(22078356,U1662116,U1910206)the Foundation of State Key Laboratory of Coal Conversion(J21-22-604)PetroChina research institute of petroleum processing program(PRIKY20065).
文摘MWW zeolites is an important catalyst in petrochemical industry.However,the efficient preparation of Mww zeolites still faces challenges,and the origin of influential factors for regulating its structure properties also remains obscure.Herein,we designed a nanoscale amorphous silica-alumina species denoted as active precursor(APS),and adopt the APS in the HMI mixture to synthesize MCM-22 zeolite(APS-MWW)successfully.To reveal the distinctive role of APS in promoting the crystallization of MWW zeolites,two crystal materials(ITQ-1 and MCM-22)and one mother liquor(ML)as seeds to synthesize three types of MWW zeolites.Typically,when adding APS in the synthetic mixture,the HMI amount was reduced to less than a quarter and crystallization time was reduced to 36 h.APS-MWW sample provides a smaller particle size(2-4μm)and thinner stacked layer thickness(5-20 nm).Synchrotron radiation Small Angle X-ray Scattering(SAXS)shows each seed has a different impact on the species'fractal structure and size distribution in the mixture,which is highly related to the nucleation and growth of MWW zeolites.APS shows a large number of 6 membered ring(MR)structure units which play a sig-nificant role in boosting the rapid nucleation and growth of APS-MwW zeolite.Among the synthesized MWW zeolites,the APS-MWW performs the highest ethylbenzene yield in the alkylation reaction of benzene-ethylene,which is attributed to its moderate flake thickness,appropriate texture properties and more external surface acidity.The results will provide a new perspective for producing MwW-types zeolites by using the available and effective active precursor.
文摘Objective:To exploretheserum-freecultureconditionsfordifferentiatingmouseembryonicstemcells(ES cells)intoneuralprecursorcells(NPC)andcomparetheeffectsof humanembryonicfibroblasts(HEF)as thefeederlayer of ES withthatof mouseembryonicfibroblasts(MEF)in vitro.Methods:MouseES cellswereculturedin or notin feederlayer cellsmediumcontainingor notleukemiainhibitoryfactorto suppresstheirdifferentiation.Immunocytochemicalmethod was usedto identifyNPCby detectingnestinantigenandalkalinephosphatase.Results: TheES cellsculturedin HEF werepositiveto alkalinephosphatase.Serum-freemediumallowedthedifferentiationof ES cellsintoNPC.Conclusion:HEFcouldreplaceMEFandkeeptheundifferentiatedconditionof ES cellswithmorebenefits.NPCof highpuritycould be culturedfromEScellsby serum-freeculturemethod.
文摘FeTi_1-O_2（= 0.00,0.05,0.10） nanocomposites are synthesized using a sol-gel method involving an ethanol solvent in the presence of ethylene glycol as the stabilizer,and acetic acid as the chemical reagent.Their structural and optical analyses are studied to reveal their physicochemical properties.Using the x-ray diffractometer（XRD）analysis,the size of the nanoparticles（NPs） is found to be 18-32 nm,where the size of the NPs decreases down to 18 nm when Fe impurity of up to 10% is added,whereas their structure remains unchanged.The results also indicate that the structure of the NPs is tetragonal in the anatase phase.The Fourier transform infrared spectroscopy analysis suggests the presence of a vibration bond（Ti-O） in the sample.The photoluminescence analysis indicates that the diffusion of Fe^（3＋） ions into the TiO_2 matrix results in a decreasing electron-hole recombination,and increases the photocatalytic properties,where the best efficiency appears at an impurity of10%.The UV-diffuse reflection spectroscopy analysis indicates that with the elevation of iron impurity,the band gap value decreases from 3.47 eV for the pure sample to 2.95 eV for the 10 mol% Fe-doped TiO_2 NPs.
基金supported by e-Sciencefund(13-02-03-3093)Postgraduate Research Grant(PPP)(PG027-2013B)+4 种基金FRGS(FP038-2014B)MOHE-ERGS(ER002-2013A)funding from UMRG(RP007B-13AFR)High Impact Research Program(UM.C/625/1/HIR/079)HIR-MOHE(UM.C/625/1/HIR/MOHE/SC/06)
文摘Current study reports a rapid one-pot non-hydrolytic condition in the synthesis of Sn O2QDs nanopowder using tin(II) stearate(Sn(St)2) as environmentally-benign organometallic precursor,which is an unprecedentedly employed-compound in preceding Sn O2nanopowder productions.The as-synthesized Sn O2QDs that are hydrophobic can be easily transferred from organic solvent to aqueous solution through a robust ligand exchange method.The stearate-capping ligands on the surface of QDs can be replaced by beta-cyclodextrin(β-CD) and eventually render the QDs highly water soluble,which ultimately make it exhibit bi-functionality for different liquid medium applications.Structural characterizations reveal that the bi-functional QDs are indeed well-matched with the standard rutile Sn O2cassiterite phase without the presence of any impurities.The QDs can be interchangeably used as photocatalyst for both aqueous and non-aqueous phase,where it shows significant enhancement of hydrogen gas production as compared to that of commercial Sn O2nanopowder.
基金supported by the National Programs for High Technology Research and Development of China (2006AA10A204)the Gansu Key Technologies R&D Program(ZGS-052-A41-0006-03)the Programs for Director Fund of Lanzhou Veterinary Research Institute
文摘We have constructed a retroviral vector mediated mammalian cell expression system of the capsid precursor protein of foot-and-mouth disease virus(FMDV).The recombinant retroviral vector pBABEpuro-P1-2A-EGFP was constructed by sequentially inserting capsid precursor protein gene(P1) of FMDV and enhanced green fluorescent protein gene(EGFP) into pBABEpuro.The recombinant retroviral vector and the pVSV-G plasmid were co-transfected into packaging cells(GP2-293) by liposomemediated transduction to produce the pseudovirus.The pseudovirus was used to infect BHK-21 cells and resistant cells were screened with puromycin.Green fluorescent proteins were observed by fluorescence microscopy and expression of the capsid precursor protein gene of FMDV was detected by indirect immunofluorescence.The recombinant retroviral vector pBABEpuro-P1-2A-EGFP was constructed successfully.The capsid precursor protein of FMDV and green fluorescent protein were expressed in BHK-21 cells.The mammalian cell expression system for the capsid precursor protein of FMDV has been constructed successfully,which lays the foundation of development of a FMDV subunit vaccine.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51002149 and 51272250)the National Basic Research Program of China(Grant No.2011CBA00105)
文摘In this study, BaTiO3 （BTO）-doped YBCO films are prepared on LaA103 （100） single-crystal substrates by metal- organic decomposition （MOD） using trifluoroacetate （TFA） precursor solutions. The critical current density （Jc） of BTO/YBCO film is as high as 10 MA/cm2 （77 K, 0 T）. The BTO peak is found in the X-ray diffraction （XRD） pattern of a final YBCO superconductivity film. Moreover, a comprehensive study of the precursor evolution is conducted mainly by X-ray analysis and μ-Raman spectroscopy. It is found that the TFA begins to decompose at the beginning of the thermal process, and then further decomposes as temperature increases, and at 700 ℃ BTO nanoparticles begin to appear. It sug- gests that the YBCO film embedded with BTO nanoparticles, whose critical current density （Jc） is enhanced, is successfully prepared by an easily scalable chemical solution deposition technique.
