Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape not...Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.展开更多
Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for...Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for online control.Establishment of kiln process control expert system was presented,with maximum temperature of pellet and gas temperature at the feed end as control cores,and interval estimate as control strategy.Software was developed and put into application in a pellet plant.The results show that control guidance of this system is accurate and effective.After production application for nearly one year,the compressive strength and first grade rate of pellet are increased by 86 N and 2.54%,respectively,while FeO content is 0.05% lowered.This system can reveal detailed information of real time kiln process,and provide a powerful tool for online control of pellet production.展开更多
Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematica...Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematical models of temperature distribution,moisture distribution and oxidation degree distribution in pellet bed,with good universality,computation speed and calculation accuracy,are presented based on analysis of heat transfer and physical-chemical reactions during grate process.And real-time visualization of temperature,moisture and oxidation degree distribution in pellet bed during grate process is realized.Model validation is displayed,and the similarity of 91% is proved.The results can reveal real time status on grate,and provide a solid foundation for the subsequent study of artificial intelligence control system of pellet production.展开更多
Based on 30MnSiV steel, the deformation resistance was studied by using Gleeble 1500 thermomechanical simulator. The mathematical model of the deformation resistance is established by analyzing the relationship of the...Based on 30MnSiV steel, the deformation resistance was studied by using Gleeble 1500 thermomechanical simulator. The mathematical model of the deformation resistance is established by analyzing the relationship of the deformation temperature, deformation rate and deformation resistance. The regression equation is highly noticeable by means of regression analysis. The mathematical model corresponds to test data by means of the contrast.展开更多
Juice extraction from chopped sweet sorghum is an example of flow through porous media. Darcy’s law is often used to express this type of phenomenon. However, using Darcy’s law to construct a mathematical model to p...Juice extraction from chopped sweet sorghum is an example of flow through porous media. Darcy’s law is often used to express this type of phenomenon. However, using Darcy’s law to construct a mathematical model to predict juice extraction from chopped sweet sorghum is difficult, because the volume of the porous media changes during the pressing operations. A mathematical model was developed from fundamental analysis to predict the juice extraction ratio of chopped sweet sorghum, and experiments were conducted to verify the model. An experimental piston-cylinder assembly was developed to conduct the validation experiments. The parameters in the developed model were estimated by using non-linear regression analysis from the experimental data. Plots of the mathematical model agreed well with experimental data. R^2（coefficient of determination） values for all the regressions studied were higher than 0.99. Results showed that the juice extraction ratio of chopped sweet sorghum approached an asymptote with a maximum value that depended on the physical form of the sample. The model could help in understanding the mechanics of juice extraction from chopped sweet sorghum.展开更多
The mathematical model of analytic hierarchy process(AHP)-fuzzy comprehensive evaluation(FCE)was applied to comprehensively evaluate the germplasm resources of Sterculia nobilis Smith,and the scientific nature and rel...The mathematical model of analytic hierarchy process(AHP)-fuzzy comprehensive evaluation(FCE)was applied to comprehensively evaluate the germplasm resources of Sterculia nobilis Smith,and the scientific nature and reliability of the mathematical model was verified by calculating index weights and comprehensive evaluation scores.In this paper,11 indicators were selected to construct a comprehensive evaluation system from four dimensions of yields,resistances,contents of main inclusions in seeds and tree shapes.AHP method was applied to calculate the index weight of each dimension,after passing the consistency test,FCE method was applied to comprehensively evaluate germplasm resources of S.nobilis Smith.The index weights of the yields,resistances,contents of major inclusions in seeds and tree shapes were 0.5518,0.2554,0.1279 and 0.0649,respectively.The yield had the greatest influence on the comprehensive evaluation of germplasm resources of S.nobilis Smith,which was in line with the actual production demand of S.nobilis Smith as a food crop.However,resistances and contents of major inclusions in seeds had limited influence on it,while tree shapes had the least influence on it.After fuzzy comprehensive evaluation,the final evaluation score was 88.00,the corresponding evaluation score was between 4 and 5,and the evaluation results ranged from slight good to good,which indicated that the evaluation weights corresponding to the four dimensions were more scientific and reasonable.In this study,the mathematical model of AHP-FCE was used to establish and evaluate the comprehensive evaluation system of the germplasm resources of S.nobilis Smith.According to the values of index weights and the evaluation results,it showed that the mathematical model was scientific and reliable,and it could provide a new reference method for the comprehensive evaluation of germplasm resources of other fruits.展开更多
Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the 'engineering-physiological' thermal models, which correlated ...Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the 'engineering-physiological' thermal models, which correlated closely to the man-machine-environment system, are the ones that developed most rapidly and have been widely accepted by thermal physiologists and environmental control engineers.This paper attempts to outline briefly the development and application of such kind of thermal models, discusses how to further develop and apply various combined thermal models in practice, and puts forward four respects of suggestions for establishment and modification of combined thermal models of man-clothing-cabin environment.展开更多
In order to study the major performance indicators of the twin-rotor piston engine(TRPE), Matlab/simulink was used to simulate the mathematical models of its thermodynamic processes. With consideration of the characte...In order to study the major performance indicators of the twin-rotor piston engine(TRPE), Matlab/simulink was used to simulate the mathematical models of its thermodynamic processes. With consideration of the characteristics of the working processes in the TRPE, corresponding differential equations were established and then simplified by period features of the TRPE. Finally, the major boundary conditions were figured out. The changing trends of mass, pressure and temperature of working fuel in the working chamber during a complete engine cycle were presented. The simulation results are consistent with the trends of an actual working cycle in the TRPE, which indicates that the method of simulation is feasible. As the pressure in the working chamber is calculated, all the performance parameters of the TRPE can be obtained. The major performance indicators, such as the indicated mean effective pressure, power to weight ratio and the volume power, are also acquired. Compared with three different types of conventional engines, the TRPE has a bigger utilization ratio of cylinder volume, a higher power to weight ratio and a more compact structure. This indicates that TRPE is superior to conventional engines.展开更多
Two mathematical models are developed in this paper to study the effectiveness of system administration efforts on the improvement of system availability, based on the assumption that there exists a transitional state...Two mathematical models are developed in this paper to study the effectiveness of system administration efforts on the improvement of system availability, based on the assumption that there exists a transitional state for a computer system in operation before it is brought down by some hardware or software problems and with intensified system administration efforts, it is possible to discover and fix the problems in time to bring the system back to normal state before it is down. Markov chain is used to simulate the transition of system states. A conclusion is made that increasing system administration efforts may be a cost-effective way to meet the requirements for moderate improvement on system availability, but higher demand on this aspect still has to be met by advanced technologies.展开更多
Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination ...Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination of the type of sluice,this paper researches the difficult points of design advance,through researching the motion locus & stress coundition of linked tetra shaft system.The writer will build up the mathmatical model and handle it with the computer.Thus,we can achieve the modern desing on the basis of the software of linked tetra shaft system development.展开更多
A mathematical simulating model of phased-array antenna in multifunction array radar has been approached in this paper, including the mathematical simulating model of plane phased-array pattern, the mathematical simul...A mathematical simulating model of phased-array antenna in multifunction array radar has been approached in this paper, including the mathematical simulating model of plane phased-array pattern, the mathematical simulating model of directionality factor, the mathematical simulating model of array factor, the mathematical simulating model of array element factor and the mathematical simulating model of beam steering.展开更多
Input-output data fitting methods are often used for unknown-structure nonlinear system modeling. Based on model-on-demand tactics, a multiple model approach to modeling for nonlinear systems is presented. The basic i...Input-output data fitting methods are often used for unknown-structure nonlinear system modeling. Based on model-on-demand tactics, a multiple model approach to modeling for nonlinear systems is presented. The basic idea is to find out, from vast historical system input-output data sets, some data sets matching with the current working point, then to develop a local model using Local Polynomial Fitting (LPF) algorithm. With the change of working points, multiple local models are built, which realize the exact modeling for the global system. By comparing to other methods, the simulation results show good performance for its simple, effective and reliable estimation.展开更多
Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the...Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the optimal ESS duration. The failure phenomena of ESS are modeled by mixed distribution, and optimal ESS duration is defined by maximizing life-cycle cost savings under the condition of meeting reliability requirement.展开更多
Synthetic dyes are very important for textile dyeing,paper printing,color photography and petroleum products.Traditional methods of dye removal include biodegradation,precipitation,adsorption,chemical degradation,phot...Synthetic dyes are very important for textile dyeing,paper printing,color photography and petroleum products.Traditional methods of dye removal include biodegradation,precipitation,adsorption,chemical degradation,photo degradation,and chemical coagulation.Dye decolorization with enzymatic reaction is an important issue for several research field(chemistry,environment)In this study,minimum decolorization time of Remazol Brilliant Blue R dye with Horseradish peroxidase enzyme was calculated using with mathematical equation depending on experimental data.Dye decolorization was determined by monitoring the absorbance decrease at the specific maximum wavelength for dye.All experiments were carried out with different initial dye concentrations of Remazol Brilliant Blue R at 25 ℃ constant temperature for 30 minutes.The development of the least squares estimators for a nonlinear model brings about complications not encountered in the case of the linear model.Decolorization times for completely removal of dye were calculated according to equation.It was shown that mathematical equation was conformed exponential curve for dye degradation.展开更多
In this paper two classes of equivalence transform methods for solving ordinary differential equations are proposed. One class of method is the equivalence integral transform method for special differential algebraic ...In this paper two classes of equivalence transform methods for solving ordinary differential equations are proposed. One class of method is the equivalence integral transform method for special differential algebraic problems. The advantage of this class of method is such that the amount of work calculating one integration with parameters becomes that of two interpolations, when the system of nonlinear equations is solved on the right hand side function. The other class of method is the equivalence substitution method for avoiding calculating derivative on the right hand side function. In order to avoid calculation derivatives, two equivalence substitution methods are proposed here. The application instances of some special effect of the equivalence substitution methods are given.展开更多
Fuzzy technology is a newly developed discipline based on fuzzy mathematics. In the recent years, it has been successfully applied into many areas, such as process control, diagnosis, evaluation, decision making and s...Fuzzy technology is a newly developed discipline based on fuzzy mathematics. In the recent years, it has been successfully applied into many areas, such as process control, diagnosis, evaluation, decision making and scheduling, especially in simulation where accurate mathematical models can not or very hard be established. In this paper, to meet the demands of fuzzy simulation, two fuzzy nets will first be presented, which are quite suitable for modeling the parallel or concurrent systems with fuzzy behavior. Then, a concept of active simulation will be introduced, in which the simulation model not only can show its fuzzy behavior, but also has a certain ability which can actively perform many very useful actions, such as automatic warning, realtime monitoring, simulation result checking, simulation model self-adapting, error recovery, simulating path tracing, system states inspecting and exception handling, by a unified approach while some specified events occur. The simulation model described by this powerful simulation modeling tool is concurrently driven by a network interpreter and an event monitor that all can be implemented by software or hardware. Besides, some interesting applications are given in the paper.展开更多
A two-dimensional steady state model was developed and solved numerically to predict the performance of evaporative condensing regenerator.Two-dimensional parameter distributions of air,solution and refrigerant were c...A two-dimensional steady state model was developed and solved numerically to predict the performance of evaporative condensing regenerator.Two-dimensional parameter distributions of air,solution and refrigerant were calculated by the mathematical model.The solution content first increases and then decreases along the solution flow direction.At y/Hr=0.98(where Hr is the height of regenerator),air humidity increases from 1.99% to 2.348% firstly and then decreases.The experimental results were used to validate mathematical model.It is indicated that the simulation results agree with experimental data well.The results not only show that the mathematical model can be used to predict the performance of regenerator,but also has great value in the design and improvement of evaporative condensing regenerator.展开更多
A new aim-points-choosing model for attacking mobile missile systems in sector region is presented and realized in this paper. The model has the generality for attacking mobile target andis also useful for making an o...A new aim-points-choosing model for attacking mobile missile systems in sector region is presented and realized in this paper. The model has the generality for attacking mobile target andis also useful for making an operational decision.展开更多
In this paper,a new multimedia data model,namely object-relation hypermedia data model(O-RHDM)which is an advanced and effective multimedia data model is proposed and designed based on the extension and integration of...In this paper,a new multimedia data model,namely object-relation hypermedia data model(O-RHDM)which is an advanced and effective multimedia data model is proposed and designed based on the extension and integration of non first normal form(NF2)multimedia data model.Its principle,mathematical description,algebra operation,organization method and store model are also discussed.And its specific application example,in the multimedia spatial data management is given combining with the Hainan multimedia touring information system.展开更多
The hydraulic roll-bending device was studied, which was widely used in modem cold rolling mills to regulate the strip flatness. The loaded roll gap crown mathematic model and the strip crown mathematic model of the r...The hydraulic roll-bending device was studied, which was widely used in modem cold rolling mills to regulate the strip flatness. The loaded roll gap crown mathematic model and the strip crown mathematic model of the reversing cold rolling process were established, and the deformation model of roll stack system of the 6-high 1 250 mm high crown （HC） reversing cold rolling mill was built by slit beam method. The simulation results show that, the quadratic component of strip crown decreases nearly linearly with the increase of the work roll bending force, when the shifting value of intermediate roll is determined by the rolling process. From the first pass to the fifth pass of reversing rolling process, the crown controllability of bending force is gradually weakened. Base on analyzing the relationship among the main factors associated with roll-bending force in reversing multi-pass rolling, such as strip width and rolling force, a preset mathematic model of bending force is developed by genetic algorithm. The simulation data demonstrate that the relative deviation of flatness criterions in each rolling pass is improved significantly and the mean relative deviation of all five passes is decreased from 25.1% to 1.7%. The model can keep good shape in multi-pass reversing cold rolling process with the high prediction accuracy and can be used to guide the production process.展开更多
基金Project(51004085)supported by the National Natural Science Foundation of China
文摘Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.
基金Project(NCET-05-0630) supported by Program for New Century Excellent Talents in University of China
文摘Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for online control.Establishment of kiln process control expert system was presented,with maximum temperature of pellet and gas temperature at the feed end as control cores,and interval estimate as control strategy.Software was developed and put into application in a pellet plant.The results show that control guidance of this system is accurate and effective.After production application for nearly one year,the compressive strength and first grade rate of pellet are increased by 86 N and 2.54%,respectively,while FeO content is 0.05% lowered.This system can reveal detailed information of real time kiln process,and provide a powerful tool for online control of pellet production.
基金Project(NCET050630) supported by Program for New Century Excellent Talents in University,China
文摘Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematical models of temperature distribution,moisture distribution and oxidation degree distribution in pellet bed,with good universality,computation speed and calculation accuracy,are presented based on analysis of heat transfer and physical-chemical reactions during grate process.And real-time visualization of temperature,moisture and oxidation degree distribution in pellet bed during grate process is realized.Model validation is displayed,and the similarity of 91% is proved.The results can reveal real time status on grate,and provide a solid foundation for the subsequent study of artificial intelligence control system of pellet production.
文摘Based on 30MnSiV steel, the deformation resistance was studied by using Gleeble 1500 thermomechanical simulator. The mathematical model of the deformation resistance is established by analyzing the relationship of the deformation temperature, deformation rate and deformation resistance. The regression equation is highly noticeable by means of regression analysis. The mathematical model corresponds to test data by means of the contrast.
文摘Juice extraction from chopped sweet sorghum is an example of flow through porous media. Darcy’s law is often used to express this type of phenomenon. However, using Darcy’s law to construct a mathematical model to predict juice extraction from chopped sweet sorghum is difficult, because the volume of the porous media changes during the pressing operations. A mathematical model was developed from fundamental analysis to predict the juice extraction ratio of chopped sweet sorghum, and experiments were conducted to verify the model. An experimental piston-cylinder assembly was developed to conduct the validation experiments. The parameters in the developed model were estimated by using non-linear regression analysis from the experimental data. Plots of the mathematical model agreed well with experimental data. R^2（coefficient of determination） values for all the regressions studied were higher than 0.99. Results showed that the juice extraction ratio of chopped sweet sorghum approached an asymptote with a maximum value that depended on the physical form of the sample. The model could help in understanding the mechanics of juice extraction from chopped sweet sorghum.
基金Supported by the National Natural Science Foundation of China(31860533)Science and Technology Major Project of Guangxi(GuikeAA17204045-4)Special Funds for Guiding Local Scientific and Technological Development by the Central Government(GuikeZY19183010)。
文摘The mathematical model of analytic hierarchy process(AHP)-fuzzy comprehensive evaluation(FCE)was applied to comprehensively evaluate the germplasm resources of Sterculia nobilis Smith,and the scientific nature and reliability of the mathematical model was verified by calculating index weights and comprehensive evaluation scores.In this paper,11 indicators were selected to construct a comprehensive evaluation system from four dimensions of yields,resistances,contents of main inclusions in seeds and tree shapes.AHP method was applied to calculate the index weight of each dimension,after passing the consistency test,FCE method was applied to comprehensively evaluate germplasm resources of S.nobilis Smith.The index weights of the yields,resistances,contents of major inclusions in seeds and tree shapes were 0.5518,0.2554,0.1279 and 0.0649,respectively.The yield had the greatest influence on the comprehensive evaluation of germplasm resources of S.nobilis Smith,which was in line with the actual production demand of S.nobilis Smith as a food crop.However,resistances and contents of major inclusions in seeds had limited influence on it,while tree shapes had the least influence on it.After fuzzy comprehensive evaluation,the final evaluation score was 88.00,the corresponding evaluation score was between 4 and 5,and the evaluation results ranged from slight good to good,which indicated that the evaluation weights corresponding to the four dimensions were more scientific and reasonable.In this study,the mathematical model of AHP-FCE was used to establish and evaluate the comprehensive evaluation system of the germplasm resources of S.nobilis Smith.According to the values of index weights and the evaluation results,it showed that the mathematical model was scientific and reliable,and it could provide a new reference method for the comprehensive evaluation of germplasm resources of other fruits.
文摘Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the 'engineering-physiological' thermal models, which correlated closely to the man-machine-environment system, are the ones that developed most rapidly and have been widely accepted by thermal physiologists and environmental control engineers.This paper attempts to outline briefly the development and application of such kind of thermal models, discusses how to further develop and apply various combined thermal models in practice, and puts forward four respects of suggestions for establishment and modification of combined thermal models of man-clothing-cabin environment.
基金Project(7131109)supported by the National Defense Pre-research Foundation of ChinaProject(51175500)supported by the National Natural Science Foundation of China
文摘In order to study the major performance indicators of the twin-rotor piston engine(TRPE), Matlab/simulink was used to simulate the mathematical models of its thermodynamic processes. With consideration of the characteristics of the working processes in the TRPE, corresponding differential equations were established and then simplified by period features of the TRPE. Finally, the major boundary conditions were figured out. The changing trends of mass, pressure and temperature of working fuel in the working chamber during a complete engine cycle were presented. The simulation results are consistent with the trends of an actual working cycle in the TRPE, which indicates that the method of simulation is feasible. As the pressure in the working chamber is calculated, all the performance parameters of the TRPE can be obtained. The major performance indicators, such as the indicated mean effective pressure, power to weight ratio and the volume power, are also acquired. Compared with three different types of conventional engines, the TRPE has a bigger utilization ratio of cylinder volume, a higher power to weight ratio and a more compact structure. This indicates that TRPE is superior to conventional engines.
基金This project was supported by the National Key program of Science and Technology(99-A29-0101).
文摘Two mathematical models are developed in this paper to study the effectiveness of system administration efforts on the improvement of system availability, based on the assumption that there exists a transitional state for a computer system in operation before it is brought down by some hardware or software problems and with intensified system administration efforts, it is possible to discover and fix the problems in time to bring the system back to normal state before it is down. Markov chain is used to simulate the transition of system states. A conclusion is made that increasing system administration efforts may be a cost-effective way to meet the requirements for moderate improvement on system availability, but higher demand on this aspect still has to be met by advanced technologies.
文摘Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination of the type of sluice,this paper researches the difficult points of design advance,through researching the motion locus & stress coundition of linked tetra shaft system.The writer will build up the mathmatical model and handle it with the computer.Thus,we can achieve the modern desing on the basis of the software of linked tetra shaft system development.
文摘A mathematical simulating model of phased-array antenna in multifunction array radar has been approached in this paper, including the mathematical simulating model of plane phased-array pattern, the mathematical simulating model of directionality factor, the mathematical simulating model of array factor, the mathematical simulating model of array element factor and the mathematical simulating model of beam steering.
基金This project was supported by National Natural Science Foundation (No. 69934020).
文摘Input-output data fitting methods are often used for unknown-structure nonlinear system modeling. Based on model-on-demand tactics, a multiple model approach to modeling for nonlinear systems is presented. The basic idea is to find out, from vast historical system input-output data sets, some data sets matching with the current working point, then to develop a local model using Local Polynomial Fitting (LPF) algorithm. With the change of working points, multiple local models are built, which realize the exact modeling for the global system. By comparing to other methods, the simulation results show good performance for its simple, effective and reliable estimation.
文摘Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the optimal ESS duration. The failure phenomena of ESS are modeled by mixed distribution, and optimal ESS duration is defined by maximizing life-cycle cost savings under the condition of meeting reliability requirement.
文摘Synthetic dyes are very important for textile dyeing,paper printing,color photography and petroleum products.Traditional methods of dye removal include biodegradation,precipitation,adsorption,chemical degradation,photo degradation,and chemical coagulation.Dye decolorization with enzymatic reaction is an important issue for several research field(chemistry,environment)In this study,minimum decolorization time of Remazol Brilliant Blue R dye with Horseradish peroxidase enzyme was calculated using with mathematical equation depending on experimental data.Dye decolorization was determined by monitoring the absorbance decrease at the specific maximum wavelength for dye.All experiments were carried out with different initial dye concentrations of Remazol Brilliant Blue R at 25 ℃ constant temperature for 30 minutes.The development of the least squares estimators for a nonlinear model brings about complications not encountered in the case of the linear model.Decolorization times for completely removal of dye were calculated according to equation.It was shown that mathematical equation was conformed exponential curve for dye degradation.
基金The project was supported by the National Natural Science Faundation of China
文摘In this paper two classes of equivalence transform methods for solving ordinary differential equations are proposed. One class of method is the equivalence integral transform method for special differential algebraic problems. The advantage of this class of method is such that the amount of work calculating one integration with parameters becomes that of two interpolations, when the system of nonlinear equations is solved on the right hand side function. The other class of method is the equivalence substitution method for avoiding calculating derivative on the right hand side function. In order to avoid calculation derivatives, two equivalence substitution methods are proposed here. The application instances of some special effect of the equivalence substitution methods are given.
文摘Fuzzy technology is a newly developed discipline based on fuzzy mathematics. In the recent years, it has been successfully applied into many areas, such as process control, diagnosis, evaluation, decision making and scheduling, especially in simulation where accurate mathematical models can not or very hard be established. In this paper, to meet the demands of fuzzy simulation, two fuzzy nets will first be presented, which are quite suitable for modeling the parallel or concurrent systems with fuzzy behavior. Then, a concept of active simulation will be introduced, in which the simulation model not only can show its fuzzy behavior, but also has a certain ability which can actively perform many very useful actions, such as automatic warning, realtime monitoring, simulation result checking, simulation model self-adapting, error recovery, simulating path tracing, system states inspecting and exception handling, by a unified approach while some specified events occur. The simulation model described by this powerful simulation modeling tool is concurrently driven by a network interpreter and an event monitor that all can be implemented by software or hardware. Besides, some interesting applications are given in the paper.
基金Project(PHR201007127) supported by Academic Human Resources Development Fund of Institutions of Higher Learning under the Jurisdiction of Beijing Municipality, China Project(bsbe2010-05) supported by the Opening Funds of State Key Laboratory of Building Safety and Built Environment, China Project supported by the Doctoral Startup Foundation of Beijing University of Civil Engineering and Architecture, China
文摘A two-dimensional steady state model was developed and solved numerically to predict the performance of evaporative condensing regenerator.Two-dimensional parameter distributions of air,solution and refrigerant were calculated by the mathematical model.The solution content first increases and then decreases along the solution flow direction.At y/Hr=0.98(where Hr is the height of regenerator),air humidity increases from 1.99% to 2.348% firstly and then decreases.The experimental results were used to validate mathematical model.It is indicated that the simulation results agree with experimental data well.The results not only show that the mathematical model can be used to predict the performance of regenerator,but also has great value in the design and improvement of evaporative condensing regenerator.
文摘A new aim-points-choosing model for attacking mobile missile systems in sector region is presented and realized in this paper. The model has the generality for attacking mobile target andis also useful for making an operational decision.
文摘In this paper,a new multimedia data model,namely object-relation hypermedia data model(O-RHDM)which is an advanced and effective multimedia data model is proposed and designed based on the extension and integration of non first normal form(NF2)multimedia data model.Its principle,mathematical description,algebra operation,organization method and store model are also discussed.And its specific application example,in the multimedia spatial data management is given combining with the Hainan multimedia touring information system.
基金Project(20050311890) supported by the Science and Technology Development Foundation of University of Science and Technology Beijing,China
文摘The hydraulic roll-bending device was studied, which was widely used in modem cold rolling mills to regulate the strip flatness. The loaded roll gap crown mathematic model and the strip crown mathematic model of the reversing cold rolling process were established, and the deformation model of roll stack system of the 6-high 1 250 mm high crown （HC） reversing cold rolling mill was built by slit beam method. The simulation results show that, the quadratic component of strip crown decreases nearly linearly with the increase of the work roll bending force, when the shifting value of intermediate roll is determined by the rolling process. From the first pass to the fifth pass of reversing rolling process, the crown controllability of bending force is gradually weakened. Base on analyzing the relationship among the main factors associated with roll-bending force in reversing multi-pass rolling, such as strip width and rolling force, a preset mathematic model of bending force is developed by genetic algorithm. The simulation data demonstrate that the relative deviation of flatness criterions in each rolling pass is improved significantly and the mean relative deviation of all five passes is decreased from 25.1% to 1.7%. The model can keep good shape in multi-pass reversing cold rolling process with the high prediction accuracy and can be used to guide the production process.
