In order to improve the bonding strength between piston alloys and cast iron ring of aluminum piston with reinforced cast iron ring,the different methods of the surface treatments(shot blasting and sand blasting) to t...In order to improve the bonding strength between piston alloys and cast iron ring of aluminum piston with reinforced cast iron ring,the different methods of the surface treatments(shot blasting and sand blasting) to the cast iron ring are experimented.The optical micrograph shows that an intermetallic layer and a ligulate shaped structure are formed between piston alloys and cast iron base ring.After sand blasting treatment,the ring surface is non-metal shiny,matte-like and has no obvious pits.The intermetallic layer thickness formed between piston alloys and cast iron is thinner and more equally distributed after sand blasting to the ring.The content of the graphite distributed the interfacial zone after the shot blasting treatment is little.With the increase of time by sand blasting,the hardness starts to slightly descend.The bonding strength of the sample by sand blasting is obviously higher than that by shot blasting and increases from 9.32 MPa to 19.53 MPa.展开更多
Electrodeposition technique was used to coat calcium phosphate on carbon fiber which can be used to reinforce hydroxyapatite. The differences between fibers treated with and without nitric acid in electrodeposition we...Electrodeposition technique was used to coat calcium phosphate on carbon fiber which can be used to reinforce hydroxyapatite. The differences between fibers treated with and without nitric acid in electrodeposition were evaluated. The X-ray diffractometry results show that CaHPO4·2H2O is obtained as the kind of calcium phosphate coating on carbon fiber. The scanning electron microscopy photographs and deposit kinetic curve indicate that the influences of the functional group attained by nitric acid treatment, the crystal morphology and crystallization of the coating layers on the fiber with and without treatment rate are obviously different. The functional group, especially the acidic group, can act as nucleation centers of electrochemical crystallization.展开更多
Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modification techniques including grind using silicon-carbide(...Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modification techniques including grind using silicon-carbide(SiC) paper, acid etching and alkali treatment were employed to produce either irregularly rough surface or micro-porous surface roughness. X-ray diffractometry(XRD), scanning electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDX) attached to SEM were used to characterize surface structure and the Ca-P coatings. Effects of the above surface treatments on the surface morphology, apatite forming ability were systematically investigated. Results indicate that all the above surface treatments increase the apatite forming ability of TiNi alloys in varying degrees when soaked in simulated body fluid(SBF). More apatite coatings formed on TiNi samples sintered at 1050℃ and 1100℃ due to their high porosity and pure TiNi phase that is beneficial to heterogeneous nucleation. Furthermore, more uniform apatite was fabricated on the sample sintered from the mixture of Ni and Ti powders.展开更多
In this present work siliconized e-glass fibre reinforced epoxy resin composite has been prepared and compared with acid and base treated e-glass fibre epoxy composites to know the significant advantage of silane trea...In this present work siliconized e-glass fibre reinforced epoxy resin composite has been prepared and compared with acid and base treated e-glass fibre epoxy composites to know the significant advantage of silane treatment on fibre. The composites were fabricated by laying 20, 30 and 40vol% of e-glass fibre into epoxy resin matrix. The e-glass fibre woven mat was surface treated by an amine functional coupling agent 3-Aminopropyletrimethoxysilane(APTMS). The fibres were surface treated by aqueous solution method and thermo assisted to create silinol groups. Similarly for acid treatment H_2SO_4 and base treatment Na OH with 1N concentration was used for surface treating the fibres. Effectiveness of silane treatment on glass fibre was compared by inter laminar shear strength test according to ASTM D 2344.Drilling process with varying diameter drill bit and varying cutting speed was applied to check the composites for their delamination resistance while machining. Maximum improvement of 15%, 12.5% and9%(20, 30 and 40 vol %) on ILSS was achieved for siliconized e-glass fibre reinforced epoxy composites.The scanning electron microscopy images revealed that no fibre pull out was present on fractured surfaces of composites which contains siliconized e-glass fibre. Similarly better dimensional accuracy was achieved on drilling process for composites contains siliconized e-glass fibre.展开更多
基金Project(51101109)supported by the National Natural Science Foundation of China
文摘In order to improve the bonding strength between piston alloys and cast iron ring of aluminum piston with reinforced cast iron ring,the different methods of the surface treatments(shot blasting and sand blasting) to the cast iron ring are experimented.The optical micrograph shows that an intermetallic layer and a ligulate shaped structure are formed between piston alloys and cast iron base ring.After sand blasting treatment,the ring surface is non-metal shiny,matte-like and has no obvious pits.The intermetallic layer thickness formed between piston alloys and cast iron is thinner and more equally distributed after sand blasting to the ring.The content of the graphite distributed the interfacial zone after the shot blasting treatment is little.With the increase of time by sand blasting,the hardness starts to slightly descend.The bonding strength of the sample by sand blasting is obviously higher than that by shot blasting and increases from 9.32 MPa to 19.53 MPa.
基金Project (2003AA302210) supported by the National High Technology Research and Development Program of Chinaproject(04JJ3083) supported by the Elite Foundation of Hunan Province+1 种基金 China project (030615) supported by the Innovation Pro
文摘Electrodeposition technique was used to coat calcium phosphate on carbon fiber which can be used to reinforce hydroxyapatite. The differences between fibers treated with and without nitric acid in electrodeposition were evaluated. The X-ray diffractometry results show that CaHPO4·2H2O is obtained as the kind of calcium phosphate coating on carbon fiber. The scanning electron microscopy photographs and deposit kinetic curve indicate that the influences of the functional group attained by nitric acid treatment, the crystal morphology and crystallization of the coating layers on the fiber with and without treatment rate are obviously different. The functional group, especially the acidic group, can act as nucleation centers of electrochemical crystallization.
基金Project(51274247) supported by the National Natural Science Foundation of ChinaProject(2014zzts177) support by the Fundamental Research Funds for the Central Universities,China
文摘Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modification techniques including grind using silicon-carbide(SiC) paper, acid etching and alkali treatment were employed to produce either irregularly rough surface or micro-porous surface roughness. X-ray diffractometry(XRD), scanning electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDX) attached to SEM were used to characterize surface structure and the Ca-P coatings. Effects of the above surface treatments on the surface morphology, apatite forming ability were systematically investigated. Results indicate that all the above surface treatments increase the apatite forming ability of TiNi alloys in varying degrees when soaked in simulated body fluid(SBF). More apatite coatings formed on TiNi samples sintered at 1050℃ and 1100℃ due to their high porosity and pure TiNi phase that is beneficial to heterogeneous nucleation. Furthermore, more uniform apatite was fabricated on the sample sintered from the mixture of Ni and Ti powders.
文摘In this present work siliconized e-glass fibre reinforced epoxy resin composite has been prepared and compared with acid and base treated e-glass fibre epoxy composites to know the significant advantage of silane treatment on fibre. The composites were fabricated by laying 20, 30 and 40vol% of e-glass fibre into epoxy resin matrix. The e-glass fibre woven mat was surface treated by an amine functional coupling agent 3-Aminopropyletrimethoxysilane(APTMS). The fibres were surface treated by aqueous solution method and thermo assisted to create silinol groups. Similarly for acid treatment H_2SO_4 and base treatment Na OH with 1N concentration was used for surface treating the fibres. Effectiveness of silane treatment on glass fibre was compared by inter laminar shear strength test according to ASTM D 2344.Drilling process with varying diameter drill bit and varying cutting speed was applied to check the composites for their delamination resistance while machining. Maximum improvement of 15%, 12.5% and9%(20, 30 and 40 vol %) on ILSS was achieved for siliconized e-glass fibre reinforced epoxy composites.The scanning electron microscopy images revealed that no fibre pull out was present on fractured surfaces of composites which contains siliconized e-glass fibre. Similarly better dimensional accuracy was achieved on drilling process for composites contains siliconized e-glass fibre.
