The numerical simulation of a blast wave of a multilayer composite charge is investigated.A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is establishe...The numerical simulation of a blast wave of a multilayer composite charge is investigated.A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program.Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25-0.5 cm and 1-3 cm.The Euler--fluxcorrected transport solver is found to be suitable for the far-field calculation after mapping.A numerical simulation is conducted to study the formation,propagation,and interaction of the shock wave of the composite charge for different initiation modes.It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge.Additionally,it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation,and the peak pressure of the shock wave exponentially decays,fitting the calculation formula of the peak overpressure attenuation under different initiation modes,which is obtained and verified by experiment.The difference between numerical and experimental results is less than 10%,and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.展开更多
The influe nce of initiation modes on the explosive dispersion process of the multi-layer co mposite charge(MCC) was studied.Overpressure sensors and high-speed photography system were used to investigate the energy r...The influe nce of initiation modes on the explosive dispersion process of the multi-layer co mposite charge(MCC) was studied.Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure.The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared.The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined.The separation position of the shock wave and fireball interface was determined.The calculation formulas of the shock radius and overpressure of the composite charge are presented.The radius of the shock wave of the composite charge was significantly affected by the initiation mode.Moreover,the development process of the composite explosive fireball under different initiation modes was analyzed,the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes,the explosion energy release rate of composite charge under simultaneous initiation modes was the highest,and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.展开更多
The failure mechanism of a cylindrical shell cut into fragments by circumferential detonation collision was experimentally and numerically investigated.A self-designed detonation wave regulator was used to control the...The failure mechanism of a cylindrical shell cut into fragments by circumferential detonation collision was experimentally and numerically investigated.A self-designed detonation wave regulator was used to control the detonation and cut the shell.It was found that the self-designed regulator controlled the fragment shape.The macrostructure and micro-characteristics of fragments revealed that shear fracture was a prior mechanism,the shell fractured not only at the position of detonation collision,but the crack also penetrated the shell at the first contact position of the Chapmen-Jouguet(C-J)wave.The effects of groove number and outer layer thickness on the fracture behavior were tested by simulations.When the thickness of the outer layer was 5e18 mm,it has little effect on fragmentation of the shell,and shells all fractured at similar positions.The increase of the groove number reduced the fracture possibility of the first contact position of the C-J wave.When the groove number reached 7 with a 10 mm outer layer(1/4 model),the fracture only occurred at the position of detonation collision and the fragment width rebounded.展开更多
This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the cha...This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the charge,a peak overpressure prediction model for the composite charge under singlepoint detonation and simultaneous detonation was established.The effects of the charge structure and initiation method on the overpressure field characteristics were investigated in AUTODYN simulation.The accuracy of the prediction model and the reliability of the numerical simulation method were subsequently verified in a series of static explosion experiments.The results reveal that the mass of the inner charge was the key factor determining the peak overpressure of the composite charge under single-point detonation.The peak overpressure in the radial direction improved apparently with an increase in the aspect ratio of the charge.The overpressure curves in the axial direction exhibited a multi-peak phenomenon,and the secondary peak overpressure even exceeded the primary peak at distances of 30D and 40D(where D is the charge diameter).The difference in peak overpressure among azimuth angles of 0-90°gradually decreased with an increase in the propagation distance of the shock wave.The coupled effect of the detonation energy of the inner and outer charge under simultaneous detonation improved the overpressure in both radial and axial directions.The difference in peak overpressure obtained from model prediction and experimental measurements was less than 16.4%.展开更多
基金funded by the National Natural Science Foundation of China under NO.11202103Qing-lan Project of Jiangsu Province。
文摘The numerical simulation of a blast wave of a multilayer composite charge is investigated.A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program.Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25-0.5 cm and 1-3 cm.The Euler--fluxcorrected transport solver is found to be suitable for the far-field calculation after mapping.A numerical simulation is conducted to study the formation,propagation,and interaction of the shock wave of the composite charge for different initiation modes.It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge.Additionally,it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation,and the peak pressure of the shock wave exponentially decays,fitting the calculation formula of the peak overpressure attenuation under different initiation modes,which is obtained and verified by experiment.The difference between numerical and experimental results is less than 10%,and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.
文摘The influe nce of initiation modes on the explosive dispersion process of the multi-layer co mposite charge(MCC) was studied.Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure.The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared.The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined.The separation position of the shock wave and fireball interface was determined.The calculation formulas of the shock radius and overpressure of the composite charge are presented.The radius of the shock wave of the composite charge was significantly affected by the initiation mode.Moreover,the development process of the composite explosive fireball under different initiation modes was analyzed,the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes,the explosion energy release rate of composite charge under simultaneous initiation modes was the highest,and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.
基金the National Natural Science Foundation of China No.11972018the Defense Pre-Research Joint Foundation of Chinese Ordnance Industry No.6141B012858.
文摘The failure mechanism of a cylindrical shell cut into fragments by circumferential detonation collision was experimentally and numerically investigated.A self-designed detonation wave regulator was used to control the detonation and cut the shell.It was found that the self-designed regulator controlled the fragment shape.The macrostructure and micro-characteristics of fragments revealed that shear fracture was a prior mechanism,the shell fractured not only at the position of detonation collision,but the crack also penetrated the shell at the first contact position of the Chapmen-Jouguet(C-J)wave.The effects of groove number and outer layer thickness on the fracture behavior were tested by simulations.When the thickness of the outer layer was 5e18 mm,it has little effect on fragmentation of the shell,and shells all fractured at similar positions.The increase of the groove number reduced the fracture possibility of the first contact position of the C-J wave.When the groove number reached 7 with a 10 mm outer layer(1/4 model),the fracture only occurred at the position of detonation collision and the fragment width rebounded.
基金funded by the National Natural Science Foundation of China(Grant No.11972018,No.12002336)China Postdoctoral Science Foundation(Grant No.2021M701710)。
文摘This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the charge,a peak overpressure prediction model for the composite charge under singlepoint detonation and simultaneous detonation was established.The effects of the charge structure and initiation method on the overpressure field characteristics were investigated in AUTODYN simulation.The accuracy of the prediction model and the reliability of the numerical simulation method were subsequently verified in a series of static explosion experiments.The results reveal that the mass of the inner charge was the key factor determining the peak overpressure of the composite charge under single-point detonation.The peak overpressure in the radial direction improved apparently with an increase in the aspect ratio of the charge.The overpressure curves in the axial direction exhibited a multi-peak phenomenon,and the secondary peak overpressure even exceeded the primary peak at distances of 30D and 40D(where D is the charge diameter).The difference in peak overpressure among azimuth angles of 0-90°gradually decreased with an increase in the propagation distance of the shock wave.The coupled effect of the detonation energy of the inner and outer charge under simultaneous detonation improved the overpressure in both radial and axial directions.The difference in peak overpressure obtained from model prediction and experimental measurements was less than 16.4%.
