期刊文献+
共找到16篇文章
< 1 >
每页显示 20 50 100
SC-CO_(2)增塑熔喷聚乙烯纤维膜制备工艺及性能研究
1
作者 侯钦正 刘文龙 +5 位作者 李长金 秦柳 丁玉梅 李好义 杨卫民 霍正元 《中国塑料》 北大核心 2025年第10期18-24,共7页
低密度聚乙烯(PE-LD)超细纤维膜制品具有耐腐蚀、疏水、柔韧抗冲击等特点,在医疗、防护、建材等领域有着广泛的应用前景。本文通过自制的超临界二氧化碳(SC-CO_(2))浸润装置,研究了SC-CO_(2)增塑熔喷的主要工艺参数热风温度、热风流量... 低密度聚乙烯(PE-LD)超细纤维膜制品具有耐腐蚀、疏水、柔韧抗冲击等特点,在医疗、防护、建材等领域有着广泛的应用前景。本文通过自制的超临界二氧化碳(SC-CO_(2))浸润装置,研究了SC-CO_(2)增塑熔喷的主要工艺参数热风温度、热风流量、计量泵转速对PE-LD纤维膜纤维形貌、结晶性能的影响,对影响机理进行了分析,并考察了其过滤与拉伸性能。结果表明,SC-CO_(2)浸渍,提高热风温度、热风流量,降低计量泵转速都有利于降低PE-LD纤维直径,其平均直径最小可达3.88μm;SC-CO_(2)处理、热风温度增加均有利于结晶度的提高;制备的样品热压后滤效达72.9%,滤阻仅51.4 Pa;最大拉伸强度为4.5 MPa,断裂伸长率最大可达30%。本研究提出了PE-LD纤维膜的制备新工艺,相关研究成果有望为聚乙烯纤维膜制备工艺的发展提供参考。 展开更多
关键词 超临界二氧化碳 熔喷 低密度聚乙烯 纤维膜 过滤性能 力学性能
在线阅读 下载PDF
新能源汽车轻量化的关键技术 被引量:18
2
作者 肖勇 丁玉梅 +3 位作者 秦柳 程祥 虞华春 杨卫民 《塑料》 CAS CSCD 北大核心 2016年第2期98-100,共3页
汽车轻量化是目前汽车节能减排最有效途径之一。以新能源汽车轻量化为目标,对新能源汽车轻量化进行关键技术的探索和研究。研究表明:通过采用纤维增强热塑性材料的全塑车身、纤维增强集成地板以及铝制轻量化车身框架等技术,可以有效减... 汽车轻量化是目前汽车节能减排最有效途径之一。以新能源汽车轻量化为目标,对新能源汽车轻量化进行关键技术的探索和研究。研究表明:通过采用纤维增强热塑性材料的全塑车身、纤维增强集成地板以及铝制轻量化车身框架等技术,可以有效减轻新能源汽车的整车质量,使整车质量降至850 kg(包括电池),可改善新能源汽车的驾驶性能和行驶里程,并通过模块化旋塑模具实现全塑车身成型制造。 展开更多
关键词 超轻新能源汽车 全塑车身 塑化集成地板 轻量化 旋塑成型
在线阅读 下载PDF
Evaluation of detonation performance of explosives ICM-101,ONC,and TNAZ based on improved VHL equation of state
3
作者 Yong Han qin liu +2 位作者 Yingliang Duan Yaqi Zhao Xinping Long 《Defence Technology(防务技术)》 2025年第2期83-97,共15页
Detonation performance is crucial for evaluating the power of high explosives(HEs),and the equation of state(EOS)that accurately describes the high-temperature,high-pressure,and high-temperature,medium-pressure states... Detonation performance is crucial for evaluating the power of high explosives(HEs),and the equation of state(EOS)that accurately describes the high-temperature,high-pressure,and high-temperature,medium-pressure states of detonation products is key to assessing the damage efficiency of these energetic materials.This article examines the limitations of the VLW EOS in representing the thermodynamic states of explosive detonation gas products under high-temperature and medium-to high-pressure conditions.A new gas EOS for detonation products,called VHL(Virial-Han-Long),is proposed.The accuracy of VHL in describing gas states under high-temperature and medium-to high-pressure conditions is verified,and its performance in evaluating explosive detonation and working capabilities is explored.The results demonstrate that VHL exhibits high precision in calculating detonation performance.Subsequently,the detonation performance of three new HEs(ICM-101,ONC,and TNAZ)was calculated and compared to traditional HEs(TATB,CL-20,and HMX).The results indicate that ONC has superior detonation performance compared to the other explosives,while ICM-101 shows a detonation velocity similar to CL-20 but with slightly lower detonation pressure.The detonation characteristics of TNAZ are comparable to those of the standard HE HMX.From the perspective of products,considering the comprehensive work performance(mechanical work and detonation heat),both ONC and ICM-101demonstrate relatively superior performance. 展开更多
关键词 Equation of state Detonation performance Working capability THERMODYNAMICS High explosive
在线阅读 下载PDF
Detonation product analysis and the paradoxical performance mechanism of TKX-50:High detonation velocity with low metal acceleration
4
作者 Kaiyuan Tan Yaqi Zhao +10 位作者 qin liu Lixiao Hao Yushi Wen Chunliang Ji Sha Yang Haoxu Wang Luchuan Jia Jiahui liu Zhuoping Duan Yong Han Fenglei Huang 《Defence Technology(防务技术)》 2025年第4期255-266,共12页
This study investigates the paradoxical detonation behavior of TKX-50,a nitrogen-rich energetic material,exhibiting higher detonation velocities but lower metal acceleration ability compared to HMX.Through experimenta... This study investigates the paradoxical detonation behavior of TKX-50,a nitrogen-rich energetic material,exhibiting higher detonation velocities but lower metal acceleration ability compared to HMX.Through experimental measurements and theoretical calculations,we propose a novel three-factor competition mechanism to explain this phenomenon.TKX-50-based PBX formulations achieved detonation velocities up to 9100 m/s,surpassing HMX-based counterparts.However,cylinder expansion tests revealed a 15%reduction in metal acceleration ability.Thermochemical measurements showed lower detonation heat for TKX-50(4900 J/g)versus HMX(5645 J/g).Our mechanism involves:(1)compositional effects prevailing at high pressures;(2)Energy release becoming essential as pressure drops;(3)Pressure-dependent product composition evolution functioning at low pressure.VLW code calculations unveiled a"crossover"in Hugoniot curves,lending support to this mechanism.This study furnishes a new framework for comprehending the performance of nitrogen-rich energetic materials,with significant implications for the design and optimization of future high-energy density materials. 展开更多
关键词 TKX-50 Nitrogen-rich explosives Detonation velocity Metal acceleration Detonation product
在线阅读 下载PDF
我国服务型制造的制度缺陷与完善方略 被引量:3
5
作者 秦柳 《江淮论坛》 CSSCI 北大核心 2022年第5期24-31,共8页
加快推进服务型制造发展,对我国制造业价值链重塑、竞争力提升和制造强国建设具有重要意义。服务型制造发展离不开良好的制度环境,从某种意义上说,制度也是一种生产力。目前我国服务型制造的制度供给主要表现为国家和地方制定的一些相... 加快推进服务型制造发展,对我国制造业价值链重塑、竞争力提升和制造强国建设具有重要意义。服务型制造发展离不开良好的制度环境,从某种意义上说,制度也是一种生产力。目前我国服务型制造的制度供给主要表现为国家和地方制定的一些相关政策,初步形成国家—省—市多层级的服务型制造政策体系。但我国服务型制造制度存在缺陷,无法满足现实需求,制约着服务型制造高质量发展。应重视非正式制度作用,加快建立标准和统计评价制度,建立健全法规政策体系,构建完善的技术、资金和人才等要素保障机制,形成以社会认知和企业价值观为先导、标准和统计评价制度为基础、法规政策体系为核心、要素保障机制为支撑的制度框架。 展开更多
关键词 服务型制造 政策 制度缺陷 制度框架
在线阅读 下载PDF
省域生态治理能力与绿色发展效率协调测度研究 被引量:1
6
作者 杨炜明 秦柳 程鑫 《绿色科技》 2023年第19期231-235,共5页
从人与自然和谐共生的现代化角度出发,先结合DPSIR模型运用熵值法测度我国30个省份生态治理能力,结合Lasso采用非期望SBM模型(Slack-Based Model)对我国2010~2020年绿色发展效率进行了测度,并计算了绿色发展效率与生态治理的耦合程度。... 从人与自然和谐共生的现代化角度出发,先结合DPSIR模型运用熵值法测度我国30个省份生态治理能力,结合Lasso采用非期望SBM模型(Slack-Based Model)对我国2010~2020年绿色发展效率进行了测度,并计算了绿色发展效率与生态治理的耦合程度。测度发现,整体生态治理能力不高且存在明显差异,我国省份绿色发展效率整体呈现“中部低四周高”的特点,生态治理能力与绿色发展效率的耦合协调程度并不高。为此,提出了降耗降能设备、优化产业结构,以实现更低的污染程度等建议。 展开更多
关键词 非期望SBM模型 耦合协调 Lasso变量选择
在线阅读 下载PDF
基于存储库数据挖掘的开源软件成功度量方法 被引量:4
7
作者 宁德军 叶培根 +1 位作者 刘琴 李梅 《电子学报》 EI CAS CSCD 北大核心 2018年第12期2930-2935,共6页
开源软件已广泛应用于各软件领域,例如操作系统、容器等,但目前尚没有一种能够综合度量开源软件的方法.我们在用户兴趣度量和开发参与度量的基础上,提出了一种能够克服度量维度单一的局限性的度量方法.基于DM模型、软件生存力模型等相... 开源软件已广泛应用于各软件领域,例如操作系统、容器等,但目前尚没有一种能够综合度量开源软件的方法.我们在用户兴趣度量和开发参与度量的基础上,提出了一种能够克服度量维度单一的局限性的度量方法.基于DM模型、软件生存力模型等相关文献研究和开源软件存储库数据挖掘,通过对项目过程数据进行聚类、主成分分析、回归分析和对开发过程的思考,本文提出一种基于存储库数据和统计学算法的开源软件成功度度量模型.并通过与用户兴趣度量结果和开发参与度量结果对比分析,证明本文的度量模型能够基于可自动无扰采集的存储库数据,更全面的衡量开源软件项目的成功.度量模型可应用于企业选择优质开源项目、学术研究、智能项目推荐等领域. 展开更多
关键词 开源软件 主成分分析 成功度量模型 数据挖掘 量化分析 软件工程 DM模型 软件生存力模型
在线阅读 下载PDF
藏东南大气中多环芳烃的污染特征及来源分析 被引量:2
8
作者 罗汉 张强 +8 位作者 岳平 奚立宗 刘琴 尹春 王元兵 秦豪君 王琦 李宝梓 王劲松 《大气科学》 CSCD 北大核心 2023年第3期853-865,共13页
为探究青藏高原东南部大气中多环芳烃(Polycyclic Aromatic Hydrocarbons,简称PAHs)的污染、源及输送特征,利用鲁朗地区(29.77°N,94.73°E)总悬浮颗粒物(Total Suspended Particles,简称TSP)和大气中的14种PAHs含量,结合同期... 为探究青藏高原东南部大气中多环芳烃(Polycyclic Aromatic Hydrocarbons,简称PAHs)的污染、源及输送特征,利用鲁朗地区(29.77°N,94.73°E)总悬浮颗粒物(Total Suspended Particles,简称TSP)和大气中的14种PAHs含量,结合同期气象环境数据进行了综合分析。结果表明,该地区TSP中PAHs和气相的PAHs质量浓度变化范围分别为0.22~5.05 ng m^(-3)和0.83~63.75 ng m^(-3),平均值分别为2.13 ng m^(-3)和11.33 ng m^(-3)。薪柴和柴油的燃烧是污染的主要方式,汽油燃烧等其他排放为次要方式。PAHs来自本地污染和远距离传输(Long Range Transmission,简称LRT)共同的影响。本地污染在四季各个源地均不相同。冬春季本地污染大,源在东南及正南方,夏秋季受本地和外来输送共同作用,本地源在东南方且占比小,LRT占比大。LRT受西北气流、西风气流和西南气流三支气流影响,污染严重时西南气流占主导,西风气流次之,污染较轻时西风气流或西北气流占主导,西北气流所传输的污染最少。该研究结果加深了对藏东南区域PAHs变化、输送特征的认识,为该区域大气污染治理提供了理论依据。 展开更多
关键词 鲁朗地区 多环芳烃 特征 源分析 传输
在线阅读 下载PDF
下颌咀嚼运动与夜磨牙症特征相关性的初步探究 被引量:9
9
作者 曾筱 王永 +3 位作者 董强 马敏先 刘琴 谭建国 《华西口腔医学杂志》 CAS CSCD 北大核心 2020年第1期54-58,共5页
目的探讨夜磨牙症各临床诊断标准和睡眠时下颌咀嚼运动发生频率的相互关系。方法运用视频多导睡眠监测方法,对20例健康成人,具有至少以下一项临床症状和体征且诊断为夜磨牙症的实验参与者进行记录:1)有牙齿频繁磨耗的报告;2)至少有3颗... 目的探讨夜磨牙症各临床诊断标准和睡眠时下颌咀嚼运动发生频率的相互关系。方法运用视频多导睡眠监测方法,对20例健康成人,具有至少以下一项临床症状和体征且诊断为夜磨牙症的实验参与者进行记录:1)有牙齿频繁磨耗的报告;2)至少有3颗牙的咬合面有牙齿磨损与牙本质暴露;3)早晨咀嚼肌症状;4)咬肌肥大。对咀嚼肌节律性运动(RMMA)和孤立强直性咀嚼肌收缩发作事件进行评分。将这些变量与临床症状和体征存在的相关性进行比较。对孤立下颌强直运动发作的患者和RMMA受试者的颞下颌关节紊乱病(TMD)发生率进行调查。结果20例受试者中,RMMA事件发作的频率为(5.8±3.1)次·h-1,孤立强直性发作的频率为(2.1±0.9)次·h-1。室友报告有磨牙体征的RMMA事件显著高于磨牙体征者(P<0.05);牙齿磨耗者的RMMA事件显著高于无牙齿磨耗者(P<0.05)。但是,RMMA事件的发生与早晨咀嚼肌症状或咬肌肥大之间无差异。RMMA发生者的TMD发生率显著高于孤立下颌强直运动发作者。结论常用于诊断夜磨牙症的临床症状和体征可体现在睡眠期间不同的临床和生理方面的下颌运动,即在睡眠期间RMMA可反映牙齿磨耗的发生,而且TMD的发生风险更大。 展开更多
关键词 夜磨牙症 多导睡眠图 咀嚼肌节律性运动
在线阅读 下载PDF
农村黑臭水体污染物削减量分配研究 被引量:3
10
作者 方鹏燕 刘操 +4 位作者 邓中麟 段新祥 王敏 秦柳 李鹏莉 《水电能源科学》 北大核心 2024年第7期44-47,86,共5页
随着城乡经济的不断发展和人民生活水平的提高,农村地区的污染问题日益凸显,其中黑臭水体问题是一大难题。为改善水环境质量,有序开展农村黑臭水体治理工作,以浠水县农村黑臭水体为例,计算浠水县农村黑臭水体污染负荷情况。基于农村黑... 随着城乡经济的不断发展和人民生活水平的提高,农村地区的污染问题日益凸显,其中黑臭水体问题是一大难题。为改善水环境质量,有序开展农村黑臭水体治理工作,以浠水县农村黑臭水体为例,计算浠水县农村黑臭水体污染负荷情况。基于农村黑臭水体的水环境容量,计算各控制单元的削减量,对污染物的削减量进行分层级分配的研究,建立削减量分配模型,确定不同水体的主要污染源及对应的不同污染源的削减量,提高污染治理的效果和可持续性,从而实现精准治污、科学治污。 展开更多
关键词 农村黑臭水体 污染成因 污染物负荷 削减量分配 贡献率削减分配法
在线阅读 下载PDF
Optimization approach of background value and initial item for improving prediction precision of GM(1,1) model 被引量:34
11
作者 Yuhong Wang qin liu +2 位作者 Jianrong Tang Wenbin Cao Xiaozhong Li 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2014年第1期77-82,共6页
A combination method of optimization of the back-ground value and optimization of the initial item is proposed. The sequences of the unbiased exponential distribution are simulated and predicted through the optimizati... A combination method of optimization of the back-ground value and optimization of the initial item is proposed. The sequences of the unbiased exponential distribution are simulated and predicted through the optimization of the background value in grey differential equations. The principle of the new information priority in the grey system theory and the rationality of the initial item in the original GM(1,1) model are ful y expressed through the improvement of the initial item in the proposed time response function. A numerical example is employed to il ustrate that the proposed method is able to simulate and predict sequences of raw data with the unbiased exponential distribution and has better simulation performance and prediction precision than the original GM(1,1) model relatively. 展开更多
关键词 background value initial item grey system theory grey prediction.
在线阅读 下载PDF
基于超临界二氧化碳的高效低阻聚丙烯熔喷纤维制备及其性能 被引量:3
12
作者 谭林立 秦柳 +3 位作者 李英儒 邓伶俐 谢知音 李时东 《纺织学报》 EI CAS CSCD 北大核心 2023年第1期87-92,共6页
为降低聚丙烯(PP)熔喷纤维的直径,解决其在空气过滤过程中过滤效率和过滤阻力之间的矛盾,借助静电场和超临界二氧化碳协同静电场制备PP熔喷纤维,并对PP纤维的形貌、过滤性能、力学性能进行表征与分析。结果表明:在制备过程中添加静电场... 为降低聚丙烯(PP)熔喷纤维的直径,解决其在空气过滤过程中过滤效率和过滤阻力之间的矛盾,借助静电场和超临界二氧化碳协同静电场制备PP熔喷纤维,并对PP纤维的形貌、过滤性能、力学性能进行表征与分析。结果表明:在制备过程中添加静电场后,PP纤维的平均直径从3.22μm降低至2.44μm,在此基础上经超临界二氧化碳处理后PP纤维的平均直径进一步降低至1.73μm,最小纤维直径达780 nm;随着纤维直径的降低,PP纤维直径分布变窄,纤维间黏结点减少,孔隙率和比表面积增加,微纳米纤维的过滤效率和过滤阻力均得到明显改善,其对0.3μm的颗粒物过滤效率高达99.25%,32 L/min气流量下过滤阻力仅为23 Pa。 展开更多
关键词 聚丙烯 静电场 超临界二氧化碳 微纳米纤维 熔喷纤维 过滤性能
在线阅读 下载PDF
Direction and polarization estimation for coherent sources using vector sensors 被引量:3
13
作者 Jun liu Zheng liu qin liu 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2013年第4期600-605,共6页
A two-dimensional direction-of-arrival (DOA) and polarization estimation algorithm for coherent sources using a linear vector-sensor array is presented. Two matrices are first constructed by the receiving data. The ... A two-dimensional direction-of-arrival (DOA) and polarization estimation algorithm for coherent sources using a linear vector-sensor array is presented. Two matrices are first constructed by the receiving data. The ranks of the two matrices are only related to the DOAs of the sources and independent of their coherency. Then the source’s elevation is resolved via the matrix pencil (MP) method, and the singular value decomposition (SVD) is used to reduce the noise effect. Finally, the source’s steering vector is estimated, and the analytics solutions of the source’s azimuth and polarization parameter can be directly computed by using a vector cross-product estimator. Moreover, the proposed algorithm can achieve the unambiguous direction estimates, even if the space between adjacent sensors is larger than a half-wavelength. Theoretical and numerical simulations show the effectiveness of the proposed algorithm. 展开更多
关键词 vector sensor coherent source direction-of-arrival (DOA) POLARIZATION matrix pencil (MP).
在线阅读 下载PDF
中国茶叶及蔬菜智能化收获技术发展现状 被引量:1
14
作者 刘勤 胡良龙 +3 位作者 郑砚砚 檀律科 王叶萌 陈青 《智能化农业装备学报(中英文)》 2021年第1期20-27,共8页
采用文献计量分析方法,基于Patentics专利分析平台,通过对专利文献中的专利申请量、专利权人、发明人、技术主题等多个分类指标进行计量、归纳和可视化分析,探明中国茶叶和蔬菜智能化采收技术的发展脉络、主要创新机构、重要创新团队、... 采用文献计量分析方法,基于Patentics专利分析平台,通过对专利文献中的专利申请量、专利权人、发明人、技术主题等多个分类指标进行计量、归纳和可视化分析,探明中国茶叶和蔬菜智能化采收技术的发展脉络、主要创新机构、重要创新团队、核心专利、主要申请人关注的重点技术等情况,为促进茶叶和蔬菜产业创新发展提供情报支撑。 展开更多
关键词 茶叶 蔬菜 智能化采收 专利
在线阅读 下载PDF
Calculating detonation performance of explosives by VLWR thermodynamics code introduced with universal VINET equation of state
15
作者 qin liu Ying-liang Duan +3 位作者 Wei Cao Hong-hao Ma Xin-ping Long Yong Han 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2022年第6期1041-1051,共11页
Thermodynamic calculation is the theoretical basis for the study of initiation and detonation,as well as the prerequisite for forecasting the detonation performance of unknown explosives.Based on the VLWR(Virial-Wu)th... Thermodynamic calculation is the theoretical basis for the study of initiation and detonation,as well as the prerequisite for forecasting the detonation performance of unknown explosives.Based on the VLWR(Virial-Wu)thermodynamic code,this paper introduced the universal solid equation of state(EOS)VINET.In order to truly reflect the compressibility of nanocarbon under the extremely high-temperature and high-pressure environment in detonation,an SVM(support vector machine)was utilized to optimize the input parameters of carbon.The detonation performance of several explosives with different densities was calculated by the optimized universal EOS,and the results show that the thermodynamic code coupled with the universal solid EOS VINET can predict the detonation performance parameters of explosives well.To investigate the application of the thermodynamic code with the improved VINET EOS in the working capacity of explosives,the interrelationship between pressure P-particle velocity u and pressure P-volume V were computed for the detonation products of TNT and HMX-based PBX(HMX:binder:insensitive agent=95:4.3:0.7)in the CJ isentropic state.A universal curve proposed by Cooper was used to compared the computed isentropic state,where the ratio of pressure to CJ state were plotted against the ratio of velocity to CJ state.The parameters of the JWL(Jones-Wilkins-Lee)EOS for detonation products were obtained by fitting the P-V curve.The cylinder tests of TNT and HMX-based PBX were numerically simulated using the LS-DYNA,it is verified that,within a certain range,the improved algorithm has superiority in describing the working capacity of explosives. 展开更多
关键词 Detonation performance Thermodynamic calculation VINET equation of state VLWR thermodynamics Code Support vector machine Cylinder test
在线阅读 下载PDF
真空辅助发泡制备硬质低密度开孔聚酰亚胺泡沫的结构与性能
16
作者 解明东 秦柳 +2 位作者 司道星 刘家鑫 杨卫民 《中国塑料》 2025年第11期7-12,共6页
利用二酐单体3,3',4,4'-联苯醚二酐(ODPA)和二胺单体4,4'-二氨基二苯醚(4,4'-ODA)为原料制备的前驱体粉末,在真空氛围下加热发泡后,在空气氛围下加热至350℃制备了硬质开孔聚酰亚胺泡沫。通过核磁、红外光谱仪、差示扫... 利用二酐单体3,3',4,4'-联苯醚二酐(ODPA)和二胺单体4,4'-二氨基二苯醚(4,4'-ODA)为原料制备的前驱体粉末,在真空氛围下加热发泡后,在空气氛围下加热至350℃制备了硬质开孔聚酰亚胺泡沫。通过核磁、红外光谱仪、差示扫描量热仪、热重、压汞、扫描电子显微镜和力学分析表征了前驱体和泡沫的化学结构、热化学性能、微观形貌和力学性能,并对泡沫的发泡过程进行了分析。结果表明,泡沫酰亚胺化完全,密度在45~57 kg/m^(3),孔隙率为95.32%,比表面积为7.267 m^(2)/g,孔径分布主要集中在200~20μm之间,微观结构呈现薄片互相粘连的三维片网状结构。其压缩10%形变的应力为16.19 kPa,弯曲最大强度为300.73 kPa,与同类型聚酰亚胺泡沫相当。 展开更多
关键词 聚酰亚胺 开孔泡沫 真空发泡
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部