Depletion-induced stress change causes the redistribution of stress field in reservoirs,which can lead to the reorientation of principal stresses.Stress reorientation has a direct impact on fracture propagation of inf...Depletion-induced stress change causes the redistribution of stress field in reservoirs,which can lead to the reorientation of principal stresses.Stress reorientation has a direct impact on fracture propagation of infill wells.To understand the effect of stress reorientation on the propagation of infill well’s fractures,an integrated simulation workflow that combines the reservoir flow calculation and the infill well hydraulic fracturing modeling is adopted.The reservoir simulation is computed to examine the relationship between the extent of stress reversal region and reservoir properties.Then,the hydraulic fracturing model considering the altered stress field for production is built to characterize the stress evolution of secondary fracturing.Numerical simulations show that stress reorientation may occur due to the decreasing of the horizontal stresses in an elliptical region around the parent well.Also,the initial stress difference is the driving factor for stress reorientation.However,the bottom hole pressure,permeability and other properties connected with fluid flow control timing of the stress reorientation.The decrease of the horizontal stresses around the parent well lead to asymmetrical propagation of a hydraulic fracture of the infill well.The study provides insights on understanding the influence of stress reorientation to the infill well fracturing treatment and interference between parent and infill wells.展开更多
Refracturing is an importa nt technique to tap the potential of reservoirs and boost production in depleted oil and gas fields.However,fracture propagation during refracturing,including both conventional refracturing ...Refracturing is an importa nt technique to tap the potential of reservoirs and boost production in depleted oil and gas fields.However,fracture propagation during refracturing,including both conventional refracturing and temporary-plugging refracturing remains poorly understood,especially for cases with non-uniform distribution of formation pressure due to long-term oil production and water injection.Therefore,taking pilot tests of refracturing with sidetracking horizontal wells in tight reservoirs in the Changqing Oilfield,China as an example,we establish a three-dimensional numerical model of conventional refracturing and a numerical model of temporary-plugging refracturing based on the discrete lattice method.Non-uniform distributions of formation pressure are imported in these models.We discuss the effects of key operating parameters such as injection rate,cluster spacing,and number of clusters on the propagation of multi-cluster fractures for conventional refracturing.For temporaryplugging refracturing,we examine the impacts of controlling factors such as the timing and number of temporary plugging on fracture propagation.In addition,we analyze a field case of temporaryplugging refracturing using well P3 in the Changqing Oilfield.The results show that fractures during re fracturing tend to propagate preferentially and dominantly in the depleted areas.Improved stimulation effect can be obtained with an optimal injection rate and a critical cluster spacing.The proposed model of temporary-plugging refracturing can well describe the temporary plugging of dominant existingfractures and the creation of new-fractures after fracturing fluid is forced to divert into other clusters from previous dominant clusters.Multiple temporary plugging can improve the balanced propagation of multi-cluster fractures and obtain the maximum fracture area.The established numerical model and research results provide theoretical guidance for the design and optimization of key operating parameters for refracturing,especially for temporary-plugging refracturing.展开更多
基金the support provided by the Scientific Research and Technology Development Project of CNPC(Grant No.kt2017-19-01-1)the National Natural Science Foundation of China(Grant No.41772286,No.42077247 and No.42002271)+2 种基金Petro China Innovation Foundation(Grant No.2018D-5007-0202)Project funded by China Postdoctoral Science Foundation(Grant No.2021T140514)Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z020009)。
文摘Depletion-induced stress change causes the redistribution of stress field in reservoirs,which can lead to the reorientation of principal stresses.Stress reorientation has a direct impact on fracture propagation of infill wells.To understand the effect of stress reorientation on the propagation of infill well’s fractures,an integrated simulation workflow that combines the reservoir flow calculation and the infill well hydraulic fracturing modeling is adopted.The reservoir simulation is computed to examine the relationship between the extent of stress reversal region and reservoir properties.Then,the hydraulic fracturing model considering the altered stress field for production is built to characterize the stress evolution of secondary fracturing.Numerical simulations show that stress reorientation may occur due to the decreasing of the horizontal stresses in an elliptical region around the parent well.Also,the initial stress difference is the driving factor for stress reorientation.However,the bottom hole pressure,permeability and other properties connected with fluid flow control timing of the stress reorientation.The decrease of the horizontal stresses around the parent well lead to asymmetrical propagation of a hydraulic fracture of the infill well.The study provides insights on understanding the influence of stress reorientation to the infill well fracturing treatment and interference between parent and infill wells.
基金funded by the National Natural Science Foundation of China(41772286,42077247)the Fundamental Research Funds for the Central UniversitiesOpen Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Z020009)。
文摘Refracturing is an importa nt technique to tap the potential of reservoirs and boost production in depleted oil and gas fields.However,fracture propagation during refracturing,including both conventional refracturing and temporary-plugging refracturing remains poorly understood,especially for cases with non-uniform distribution of formation pressure due to long-term oil production and water injection.Therefore,taking pilot tests of refracturing with sidetracking horizontal wells in tight reservoirs in the Changqing Oilfield,China as an example,we establish a three-dimensional numerical model of conventional refracturing and a numerical model of temporary-plugging refracturing based on the discrete lattice method.Non-uniform distributions of formation pressure are imported in these models.We discuss the effects of key operating parameters such as injection rate,cluster spacing,and number of clusters on the propagation of multi-cluster fractures for conventional refracturing.For temporaryplugging refracturing,we examine the impacts of controlling factors such as the timing and number of temporary plugging on fracture propagation.In addition,we analyze a field case of temporaryplugging refracturing using well P3 in the Changqing Oilfield.The results show that fractures during re fracturing tend to propagate preferentially and dominantly in the depleted areas.Improved stimulation effect can be obtained with an optimal injection rate and a critical cluster spacing.The proposed model of temporary-plugging refracturing can well describe the temporary plugging of dominant existingfractures and the creation of new-fractures after fracturing fluid is forced to divert into other clusters from previous dominant clusters.Multiple temporary plugging can improve the balanced propagation of multi-cluster fractures and obtain the maximum fracture area.The established numerical model and research results provide theoretical guidance for the design and optimization of key operating parameters for refracturing,especially for temporary-plugging refracturing.
