In dielectrometry,traditional analytical and numerical algorithms are difficultly employed in complex resonant cavities.For a special kind of structure(a rotating resonant cavity),the body of revolution finite-element...In dielectrometry,traditional analytical and numerical algorithms are difficultly employed in complex resonant cavities.For a special kind of structure(a rotating resonant cavity),the body of revolution finite-element method(BOR-FEM)is employed to calculate the resonant parameters and dielectric parameters.In this paper,several typical resonant structures are selected for analysis and verification.Compared with the resonance parameter values in the literature and the simulation results of commercial software,the error of the BOR-FEM calculation is less than 0.9%and a single solution time is less than 1 s.Reentrant coaxial resonant cavities loaded with dielectric materials are analyzed using this method and compared with simulation results,showing good agreement.Finally,in this paper,the established BOR-FEM method is successfully applied with a machined cavity for the accurate measurement of the complex dielectric constant of dielectric materials.The test specimens were machined from polytetrafluoroethylene,fused silica and Al_(2)O_(3),and the test results showed good agreement with the literature reference values.展开更多
We report on the formation of two-dimensional monolayer AgTe crystal on Ag(111)substrates.The samples are prepared in ultrahigh vacuum by deposition of Te on Ag(111)followed by annealing.Using a scanning tunneling mic...We report on the formation of two-dimensional monolayer AgTe crystal on Ag(111)substrates.The samples are prepared in ultrahigh vacuum by deposition of Te on Ag(111)followed by annealing.Using a scanning tunneling microscope(STM)and low electron energy diffraction(LEED),we investigate the atomic structure of the samples.The STM images and the LEED pattern show that monolayer AgTe crystal is formed on Ag(111).Four kinds of atomic structures of AgTe and Ag(111)are observed:(i)flat honeycomb structure,(ii)bulked honeycomb,(iii)stripe structure,(iv)hexagonal structure.The structural analysis indicates that the formation of the different atomic structures is due to the lattice mismatch and relief of the intrinsic strain in the AgTe layer.Our results provide a simple and convenient method to produce monolayer AgTe atomic crystal on Ag(111)and a template for study of novel physical properties and for future quantum devices.展开更多
PdTe2, a member of layered transition metal dichalcogenides （TMDs）, has aroused significant research interest due to the coexistence of superconductivity and type-II Dirac fermions. It provides a promising platform ...PdTe2, a member of layered transition metal dichalcogenides （TMDs）, has aroused significant research interest due to the coexistence of superconductivity and type-II Dirac fermions. It provides a promising platform to explore the inter- play between superconducting quasiparticles and Dirac fermions. Moreover, PdTe2 has also been used as a substrate for monolayer antimonene growth. Here in this paper, we report the epitaxial growth of high quality PdTe2 films on bilayer graphene/SiC（0001） by molecular beam epitaxy （MBE）. Atomically thin films are characterized by scanning tunneling microscopy （STM）, X-ray photoemission spectroscopy （XPS）, low-energy electron diffraction （LEED）, and Raman spec- troscopy. The band structure of 6-layer PdTe2 film is measured by angle-resolved photoemission spectroscopy （ARPES）. Moreover, our air exposure experiments show excellent chemical stability of epitaxial PdTe2 film. High-quality PdTe2 films provide opportunities to build antimonene/PdTe2 heterostructure in ultrahigh vacuum for future applications in electronic and optoelectronic nanodevices.展开更多
Yttrium iron garnet(YIG) films possessing both perpendicular magnetic anisotropy(PMA) and low damping would serve as ideal candidates for high-speed energy-efficient spintronic and magnonic devices.However,it is still...Yttrium iron garnet(YIG) films possessing both perpendicular magnetic anisotropy(PMA) and low damping would serve as ideal candidates for high-speed energy-efficient spintronic and magnonic devices.However,it is still challenging to achieve PMA in YIG films thicker than 20 nm,which is a major bottleneck for their development.In this work,we demonstrate that this problem can be solved by using substrates with moderate lattice mismatch with YIG so as to suppress the excessive strain-induced stress release as increasing the YIG thickness.After carefully optimizing the growth and annealing conditions,we have achieved out-of-plane spontaneous magnetization in YIG films grown on sGGG substrates,even when they are as thick as 50 nm.Furthermore,ferromagnetic resonance and spin pumping induced inverse spin Hall effect measurements further verify the good spin transparency at the surface of our YIG films.展开更多
By using scanning tunneling microscope/microscopy(STM/STS), we reveal the detailed electronic structures around the sharp edges and strained terraces of lateral monolayer-bilayer Pd_(2)Se_(3) heterostructures. We find...By using scanning tunneling microscope/microscopy(STM/STS), we reveal the detailed electronic structures around the sharp edges and strained terraces of lateral monolayer-bilayer Pd_(2)Se_(3) heterostructures. We find that the edges of such heterostructures are well-defined zigzag type. Band bending and alignment are observed across the zigzag edge, forming a monolayer-bilayer heterojunction. In addition, an n-type band bending is induced by strain on a confined bilayer Pd_(2)Se_(3) terrace. These results provide effective toolsets to tune the band structures in Pd_(2)Se_(3)-based heterostructures and devices.展开更多
Abnormal hematocrit(Hct)is associated with an increased risk of pre-hypertension and all-cause death in general population,and people with a high Hct value are susceptible to arterial cardiovascular disease and venous...Abnormal hematocrit(Hct)is associated with an increased risk of pre-hypertension and all-cause death in general population,and people with a high Hct value are susceptible to arterial cardiovascular disease and venous thromboembolism.In this study,we report for the first time on the ability of thermoacoustic imaging(TAI)for in vivo evaluating Hct changes in human forearms.In vitro blood samples with different Hct values from healthy volunteers(n=3)were prepared after centrifugation.TAI was performed using these samples in comparison with the direct measurements of conductivity.In vivo TAI was conducted in the forearm of healthy volunteers(n=7)where Hct changes were produced through a vascular occlusion stimulation over a period of time.The results of in vitro blood samples obtained from the 3 healthy subjects show that the thermoacoustic(TA)signals changes due to the variation of blood conductivity are closely related to the changes in Hct.In addition,the in vivo TA signals obtained from the 7 healthy subjects consistently increase in the artery/muscle and decrease in the vein during venous or arterial occlusion because of the changed Hct value in their forearms.These findings suggest that TAI has the potential to become a new tool for monitoring Hct changes for a variety of pre-clinical and clinical applications.展开更多
Theamorphous magnetoelastic Fe66Co17Si1B6 thin films have been deposited by dc magnetron sputtering. A lot of ＂nano-trenches＂ have been observed on the fdm surfaces by AFM. The permeability of amorphous Fe66COlTSilB...Theamorphous magnetoelastic Fe66Co17Si1B6 thin films have been deposited by dc magnetron sputtering. A lot of ＂nano-trenches＂ have been observed on the fdm surfaces by AFM. The permeability of amorphous Fe66COlTSilB6 thin films was measured within the frequency range of 0.6GHz-10.2 GHz. The ferromagnetic resonance frequency was found to be 1.2 GHz. MFM shows that the domain of thin film is a maze-type pattern, which indicates that an out-of-plane magnetic anisotropy exists. The out-of-plane anisotropy is believed due to the stress-induced magnetic anisotropy. It can be inferred that the internal stress is tensile stress and normal to the film plane. Index Terms展开更多
Two-dimensional(2D)materials received large amount of studies because of the enormous potential in basic science and industrial applications.Monolayer Pd2Se3 is a fascinating 2D material that was predicted to possess ...Two-dimensional(2D)materials received large amount of studies because of the enormous potential in basic science and industrial applications.Monolayer Pd2Se3 is a fascinating 2D material that was predicted to possess excellent thermoelectric,electronic,transport,and optical properties.However,the fabrication of large-scale and high-quality monolayer Pd2Se3 is still challenging.Here,we report the synthesis of large-scale and high-quality monolayer Pd2Se3 on graphene-SiC(0001)by a two-step epitaxial growth.The atomic structure of Pd2Se3 was investigated by scanning tunneling microscope(STM)and confirmed by non-contact atomic force microscope(nc-AFM).Two subgroups of Se atoms have been identified by nc-AFM image in agreement with the theoretically predicted atomic structure.Scanning tunneling spectroscopy(STS)reveals a bandgap of 1.2 eV,suggesting that monolayer Pd2Se3 can be a candidate for photoelectronic applications.The atomic structure and defect levels of a single Se vacancy were also investigated.The spatial distribution of STS near the Se vacancy reveals a highly anisotropic electronic behavior.The two-step epitaxial synthesis and characterization of Pd2Se3 provide a promising platform for future investigations and applications.展开更多
基金the National Natural Science Foundation of China(Grant No.62001083)the Guangdong Provincial Key Research and Development Project,China(Grant No.2020B010179002).
文摘In dielectrometry,traditional analytical and numerical algorithms are difficultly employed in complex resonant cavities.For a special kind of structure(a rotating resonant cavity),the body of revolution finite-element method(BOR-FEM)is employed to calculate the resonant parameters and dielectric parameters.In this paper,several typical resonant structures are selected for analysis and verification.Compared with the resonance parameter values in the literature and the simulation results of commercial software,the error of the BOR-FEM calculation is less than 0.9%and a single solution time is less than 1 s.Reentrant coaxial resonant cavities loaded with dielectric materials are analyzed using this method and compared with simulation results,showing good agreement.Finally,in this paper,the established BOR-FEM method is successfully applied with a machined cavity for the accurate measurement of the complex dielectric constant of dielectric materials.The test specimens were machined from polytetrafluoroethylene,fused silica and Al_(2)O_(3),and the test results showed good agreement with the literature reference values.
基金Supported by the National Key Research&Development Projects of China under Grant Nos 2016YFA0202300 and 2018FYA0305800the National Natural Science Foundation of China under Grant Nos 61390501,61474141 and 11604373+1 种基金the CAS Pioneer Hundred Talents Programthe Strategic Priority Research Program of Chinese Academy of Sciences under Grant No XDB28000000
文摘We report on the formation of two-dimensional monolayer AgTe crystal on Ag(111)substrates.The samples are prepared in ultrahigh vacuum by deposition of Te on Ag(111)followed by annealing.Using a scanning tunneling microscope(STM)and low electron energy diffraction(LEED),we investigate the atomic structure of the samples.The STM images and the LEED pattern show that monolayer AgTe crystal is formed on Ag(111).Four kinds of atomic structures of AgTe and Ag(111)are observed:(i)flat honeycomb structure,(ii)bulked honeycomb,(iii)stripe structure,(iv)hexagonal structure.The structural analysis indicates that the formation of the different atomic structures is due to the lattice mismatch and relief of the intrinsic strain in the AgTe layer.Our results provide a simple and convenient method to produce monolayer AgTe atomic crystal on Ag(111)and a template for study of novel physical properties and for future quantum devices.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61390501,61622116,and 61471337)the Science Fund from the Chinese Academy of Sciences(CAS)(Grant Nos.XDPB0601 and XDPB0801)the CAS Pioneer Hundred Talents Program,and the Beijing Nova Program(Grant No.Z181100006218023)
文摘PdTe2, a member of layered transition metal dichalcogenides （TMDs）, has aroused significant research interest due to the coexistence of superconductivity and type-II Dirac fermions. It provides a promising platform to explore the inter- play between superconducting quasiparticles and Dirac fermions. Moreover, PdTe2 has also been used as a substrate for monolayer antimonene growth. Here in this paper, we report the epitaxial growth of high quality PdTe2 films on bilayer graphene/SiC（0001） by molecular beam epitaxy （MBE）. Atomically thin films are characterized by scanning tunneling microscopy （STM）, X-ray photoemission spectroscopy （XPS）, low-energy electron diffraction （LEED）, and Raman spec- troscopy. The band structure of 6-layer PdTe2 film is measured by angle-resolved photoemission spectroscopy （ARPES）. Moreover, our air exposure experiments show excellent chemical stability of epitaxial PdTe2 film. High-quality PdTe2 films provide opportunities to build antimonene/PdTe2 heterostructure in ultrahigh vacuum for future applications in electronic and optoelectronic nanodevices.
基金supported by the National Natural Science Foundation of China(Grant Nos.52072060 and 52021001)the National Key R&D Program of China(Grant No.2021YFB2801600)the China Postdoctoral Science Foundation(Grant No.2021M700679)。
文摘Yttrium iron garnet(YIG) films possessing both perpendicular magnetic anisotropy(PMA) and low damping would serve as ideal candidates for high-speed energy-efficient spintronic and magnonic devices.However,it is still challenging to achieve PMA in YIG films thicker than 20 nm,which is a major bottleneck for their development.In this work,we demonstrate that this problem can be solved by using substrates with moderate lattice mismatch with YIG so as to suppress the excessive strain-induced stress release as increasing the YIG thickness.After carefully optimizing the growth and annealing conditions,we have achieved out-of-plane spontaneous magnetization in YIG films grown on sGGG substrates,even when they are as thick as 50 nm.Furthermore,ferromagnetic resonance and spin pumping induced inverse spin Hall effect measurements further verify the good spin transparency at the surface of our YIG films.
基金Project supported by the National Key Research and Development Project of China(Grant Nos.2016YFA0202300,2018YFA0305800,and 2019YFA0308500)the National Natural Science Foundation of China(Grant Nos.61888102 and 52022105)+1 种基金the Strategic Priority Research Program of Chinese Academy of Sciences(Grant Nos.XDB30000000 and XDB28000000)the University of Chinese Academy of Sciences。
文摘By using scanning tunneling microscope/microscopy(STM/STS), we reveal the detailed electronic structures around the sharp edges and strained terraces of lateral monolayer-bilayer Pd_(2)Se_(3) heterostructures. We find that the edges of such heterostructures are well-defined zigzag type. Band bending and alignment are observed across the zigzag edge, forming a monolayer-bilayer heterojunction. In addition, an n-type band bending is induced by strain on a confined bilayer Pd_(2)Se_(3) terrace. These results provide effective toolsets to tune the band structures in Pd_(2)Se_(3)-based heterostructures and devices.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61701076,82071940,and 62001075).
文摘Abnormal hematocrit(Hct)is associated with an increased risk of pre-hypertension and all-cause death in general population,and people with a high Hct value are susceptible to arterial cardiovascular disease and venous thromboembolism.In this study,we report for the first time on the ability of thermoacoustic imaging(TAI)for in vivo evaluating Hct changes in human forearms.In vitro blood samples with different Hct values from healthy volunteers(n=3)were prepared after centrifugation.TAI was performed using these samples in comparison with the direct measurements of conductivity.In vivo TAI was conducted in the forearm of healthy volunteers(n=7)where Hct changes were produced through a vascular occlusion stimulation over a period of time.The results of in vitro blood samples obtained from the 3 healthy subjects show that the thermoacoustic(TA)signals changes due to the variation of blood conductivity are closely related to the changes in Hct.In addition,the in vivo TA signals obtained from the 7 healthy subjects consistently increase in the artery/muscle and decrease in the vein during venous or arterial occlusion because of the changed Hct value in their forearms.These findings suggest that TAI has the potential to become a new tool for monitoring Hct changes for a variety of pre-clinical and clinical applications.
文摘Theamorphous magnetoelastic Fe66Co17Si1B6 thin films have been deposited by dc magnetron sputtering. A lot of ＂nano-trenches＂ have been observed on the fdm surfaces by AFM. The permeability of amorphous Fe66COlTSilB6 thin films was measured within the frequency range of 0.6GHz-10.2 GHz. The ferromagnetic resonance frequency was found to be 1.2 GHz. MFM shows that the domain of thin film is a maze-type pattern, which indicates that an out-of-plane magnetic anisotropy exists. The out-of-plane anisotropy is believed due to the stress-induced magnetic anisotropy. It can be inferred that the internal stress is tensile stress and normal to the film plane. Index Terms
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2016YFA0202300,2018YFA0305800,and 2019YFA0308500)the National Natural Science Foundation of China(Grant Nos.51922011,51872284,and 61888102)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant Nos.XDB30000000 and XDB28000000)the Science Fund from University of the Chinese Academy of Sciences.
文摘Two-dimensional(2D)materials received large amount of studies because of the enormous potential in basic science and industrial applications.Monolayer Pd2Se3 is a fascinating 2D material that was predicted to possess excellent thermoelectric,electronic,transport,and optical properties.However,the fabrication of large-scale and high-quality monolayer Pd2Se3 is still challenging.Here,we report the synthesis of large-scale and high-quality monolayer Pd2Se3 on graphene-SiC(0001)by a two-step epitaxial growth.The atomic structure of Pd2Se3 was investigated by scanning tunneling microscope(STM)and confirmed by non-contact atomic force microscope(nc-AFM).Two subgroups of Se atoms have been identified by nc-AFM image in agreement with the theoretically predicted atomic structure.Scanning tunneling spectroscopy(STS)reveals a bandgap of 1.2 eV,suggesting that monolayer Pd2Se3 can be a candidate for photoelectronic applications.The atomic structure and defect levels of a single Se vacancy were also investigated.The spatial distribution of STS near the Se vacancy reveals a highly anisotropic electronic behavior.The two-step epitaxial synthesis and characterization of Pd2Se3 provide a promising platform for future investigations and applications.
