Marble that exploited for micronized calcite production in Nigde area (South Central Turkey) occur in the Upper Cretaceous Gümü ler, A gedi i, and Kaleboynu Formations of the Nigde Massif. Although there are...Marble that exploited for micronized calcite production in Nigde area (South Central Turkey) occur in the Upper Cretaceous Gümü ler, A gedi i, and Kaleboynu Formations of the Nigde Massif. Although there are a few marble producing quarries in the area, it is long been known that the marbles of this area are generally highly fractured and don’t yield large blocks or suitable slabs meeting the industrial demands. Thus, most of the production is currently carried out mainly as building stone, crushed stone and micronized calcite. Due mainly to high demand, micronized calcite has been becoming very significant export product to the state’s economy. Because the Nigde marbles are coarse grained with high CaCO3 content, high purity and whiteness, they are considered to be the highest quality micronized calcite quarries in the country. Consequently, the area drew many national and international investors resulting in significant increase in the number and extent of micronized calcite plants in the area. In early 1980’s, the city of Nigde had only one or two plants, it is now well over 5 including foreign investors and joint ventures. Annual production is also considerably increased from 20,000-30,000 tones to almost half a million tones and it is still in increasing trend.展开更多
The G ksun Ophiolites in Do an ehir area (Malatya-Southern Turkey) contain corundum mineralizations with significant gem-quality (ruby). Modal mineralogical composition of ruby-bearing rocks consists of hornblende (...The G ksun Ophiolites in Do an ehir area (Malatya-Southern Turkey) contain corundum mineralizations with significant gem-quality (ruby). Modal mineralogical composition of ruby-bearing rocks consists of hornblende (65%-70 %), plagioclase (20%-25%), green garnet (4%-5 %), ruby (2%-3%), and opaque minerals (<1%). Although ruby shows varying colors in the groundmass, it is generally colorless and rarely very pale pink and has high relief. It has no cleavage but rotund fractures. It has highest interference colors and twinning in some poly-prismatic crystals under the microscope. Crystal sizes range from 2x10 mm up to 30x50 mm. The most remarkable properties are red to pink in color, low to medium transparency, medium to big crystal sizes, lamellar and deformation twinning, secondary liquid feathers, hollow tubes, mineral inclusions, asterism, high birefringence and refractive indices and specific gravity. Rubies show crimson red cathodoluminescence colors activated by Cr3+ in the crystal structure, which is confirmed by the Electron Probe Microanalyses (EPMA). Tectonic setting, geological environment, petrographical, mineralogical, geochemical and gemological characteristics of rubies suggest that the Do an ehir ruby mineralization can be classified into the amphibolite-hosted type of corundum deposits of Tanzania.展开更多
Most of the massive sulfide deposits (VMS) occurring from Precambrian to Cenozoic throughout the world has been subsequently metamorphosed at various grades. Thus, all the original textures have been either completely...Most of the massive sulfide deposits (VMS) occurring from Precambrian to Cenozoic throughout the world has been subsequently metamorphosed at various grades. Thus, all the original textures have been either completely destroyed or strongly modified. However, there are a very few examples, rather younger deposits such as late Cretaceous Turkish VMS deposits and Miocene Kuroko deposits of Japan in which representative and original ore textures are preserved. The Turkish massive sulfide deposits are mainly Cu-Zn-Pb-type and entirely hosted by Late Cretaceous felsic volcanic rocks within a paleoarc geotectonic setting.展开更多
Limestones have been one of the major economic sources in state’s economy and becoming more and more important in recent years. They are mainly exploited for crushed stone, dimension stone and micronized calcite prod...Limestones have been one of the major economic sources in state’s economy and becoming more and more important in recent years. They are mainly exploited for crushed stone, dimension stone and micronized calcite production including lab-grade CaO with high purity. Although some of the applications require fairly simple value-adding processes such as crushing and/or sizing, some may require rather complicated processes such as calcination and coating.展开更多
Optical cathodoluminescence microscopy (CLM) can provide very useful information both on mineral zoning formed during crystal growth and on variations in chemical composition of sphalerites which is reflected by their...Optical cathodoluminescence microscopy (CLM) can provide very useful information both on mineral zoning formed during crystal growth and on variations in chemical composition of sphalerites which is reflected by their visible colors. Gem quality sphalerite crystals associated with dolomite, calcite and fluorite having 3 different visible colors - green, honey and brown - were studied to compare their mineral chemistry and CL characteristics. Electron microprobe analyses indicated essentially no significant differences in terms of major components. Although the common CL-quencher ferrous iron contents of all three were lower than 0.25 wt %, none of the sphalerites cathodoluminescenced: two (brown and honey) were non-CL, the green sphalerite showed very week CL in faint brown color. Other trace elements that were analyzed include Fe, Cd, Mn, Ag, Hg, In, Bi, Cu, Ge, and Ga. Fe, Cd, Ga and Cu were relatively higher than the others. Most significant differences with respect to the common trace elements include honey colored sphalerites are essentially Fe- and Cd-poor but rich in Ga, green sphalerites are Fe- and Cd- rich but poor in all the others, and brown sphalerites are rich in Cd. No conclusive relation between non-CL behavior of all three sphalerites and their trace element chemistry was established, however; low quantities of common CL activators in sphalerite crystal structures such as Mn, Cu, and In were the main cause of the non-CL behavior.展开更多
文摘Marble that exploited for micronized calcite production in Nigde area (South Central Turkey) occur in the Upper Cretaceous Gümü ler, A gedi i, and Kaleboynu Formations of the Nigde Massif. Although there are a few marble producing quarries in the area, it is long been known that the marbles of this area are generally highly fractured and don’t yield large blocks or suitable slabs meeting the industrial demands. Thus, most of the production is currently carried out mainly as building stone, crushed stone and micronized calcite. Due mainly to high demand, micronized calcite has been becoming very significant export product to the state’s economy. Because the Nigde marbles are coarse grained with high CaCO3 content, high purity and whiteness, they are considered to be the highest quality micronized calcite quarries in the country. Consequently, the area drew many national and international investors resulting in significant increase in the number and extent of micronized calcite plants in the area. In early 1980’s, the city of Nigde had only one or two plants, it is now well over 5 including foreign investors and joint ventures. Annual production is also considerably increased from 20,000-30,000 tones to almost half a million tones and it is still in increasing trend.
文摘The G ksun Ophiolites in Do an ehir area (Malatya-Southern Turkey) contain corundum mineralizations with significant gem-quality (ruby). Modal mineralogical composition of ruby-bearing rocks consists of hornblende (65%-70 %), plagioclase (20%-25%), green garnet (4%-5 %), ruby (2%-3%), and opaque minerals (<1%). Although ruby shows varying colors in the groundmass, it is generally colorless and rarely very pale pink and has high relief. It has no cleavage but rotund fractures. It has highest interference colors and twinning in some poly-prismatic crystals under the microscope. Crystal sizes range from 2x10 mm up to 30x50 mm. The most remarkable properties are red to pink in color, low to medium transparency, medium to big crystal sizes, lamellar and deformation twinning, secondary liquid feathers, hollow tubes, mineral inclusions, asterism, high birefringence and refractive indices and specific gravity. Rubies show crimson red cathodoluminescence colors activated by Cr3+ in the crystal structure, which is confirmed by the Electron Probe Microanalyses (EPMA). Tectonic setting, geological environment, petrographical, mineralogical, geochemical and gemological characteristics of rubies suggest that the Do an ehir ruby mineralization can be classified into the amphibolite-hosted type of corundum deposits of Tanzania.
文摘Most of the massive sulfide deposits (VMS) occurring from Precambrian to Cenozoic throughout the world has been subsequently metamorphosed at various grades. Thus, all the original textures have been either completely destroyed or strongly modified. However, there are a very few examples, rather younger deposits such as late Cretaceous Turkish VMS deposits and Miocene Kuroko deposits of Japan in which representative and original ore textures are preserved. The Turkish massive sulfide deposits are mainly Cu-Zn-Pb-type and entirely hosted by Late Cretaceous felsic volcanic rocks within a paleoarc geotectonic setting.
文摘Limestones have been one of the major economic sources in state’s economy and becoming more and more important in recent years. They are mainly exploited for crushed stone, dimension stone and micronized calcite production including lab-grade CaO with high purity. Although some of the applications require fairly simple value-adding processes such as crushing and/or sizing, some may require rather complicated processes such as calcination and coating.
文摘Optical cathodoluminescence microscopy (CLM) can provide very useful information both on mineral zoning formed during crystal growth and on variations in chemical composition of sphalerites which is reflected by their visible colors. Gem quality sphalerite crystals associated with dolomite, calcite and fluorite having 3 different visible colors - green, honey and brown - were studied to compare their mineral chemistry and CL characteristics. Electron microprobe analyses indicated essentially no significant differences in terms of major components. Although the common CL-quencher ferrous iron contents of all three were lower than 0.25 wt %, none of the sphalerites cathodoluminescenced: two (brown and honey) were non-CL, the green sphalerite showed very week CL in faint brown color. Other trace elements that were analyzed include Fe, Cd, Mn, Ag, Hg, In, Bi, Cu, Ge, and Ga. Fe, Cd, Ga and Cu were relatively higher than the others. Most significant differences with respect to the common trace elements include honey colored sphalerites are essentially Fe- and Cd-poor but rich in Ga, green sphalerites are Fe- and Cd- rich but poor in all the others, and brown sphalerites are rich in Cd. No conclusive relation between non-CL behavior of all three sphalerites and their trace element chemistry was established, however; low quantities of common CL activators in sphalerite crystal structures such as Mn, Cu, and In were the main cause of the non-CL behavior.
