This paper focuses on anisotropy of coal permeability and its stress sensitivity.Coal blocks were taken from Xinjing Coal Mine in Yangquan Coal District.Coal cores were then drilled along the strike,dip,and vertical d...This paper focuses on anisotropy of coal permeability and its stress sensitivity.Coal blocks were taken from Xinjing Coal Mine in Yangquan Coal District.Coal cores were then drilled along the strike,dip,and vertical directions.Coal permeabilities were measured with respect to stress by using a self-developed coal permeability measurement system.The used samples exhibited significant permeability anisotropy.The permeability along the strike direction was greatest among the three directions,the permeability along the vertical direction was the smallest,and the permeability along the dip direction was between the other two directions.The sensitivity of coal permeability to stress was transversely isotropic.The stress sensitivity coefficient was greater along the horizontal directions than along the vertical directions.Coal permeability exhibited anisotropic stress sensitivity due to anisotropy in Young’s modulus and porosity.The results obtained in this study are useful for optimizing the arrangement of pre-drainage boreholes.展开更多
High nitrogen stainless steel with nitrogen content of 0.75%was welded by gas metal arc welding with Ar-N_(2)-O_(2)ternary shielding gas.The effect of the ternary shielding gas on the retention and improvement of nitr...High nitrogen stainless steel with nitrogen content of 0.75%was welded by gas metal arc welding with Ar-N_(2)-O_(2)ternary shielding gas.The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified.Surfacing test was conducted first to compare the ability of O_(2)and CO_(2)in prompting nitrogen dissolution.The nitrogen content of the surfacing metal with O_(2)is slightly higher than CO_(2).And then AreN_(2)-O_(2)shielding gas was applied to weld high nitrogen stainless steel.After using N_(2)-containing shielding gas,the nitrogen content of the weld was improved by 0.1 wt%.As N_(2)continued to increase,the increment of nitrogen content was not obvious,but the ferrite decreased from the top to the bottom.When the proportion of N_(2)reached 20%,a full austenitic weld was obtained and the tensile strength was improved by 8.7%.Combined with the results of surfacing test and welding test,it is concluded that the main effect of N_(2)is to inhibit the escape of nitrogen and suppress the nitrogen diffusion from bottom to the top in the molten pool.展开更多
Geological sequestration of CO_(2)is critical for deep decarbonization,but the geomechanical stability of coal reservoirs remains a major challenge.This study integrates nanoindentation,XRD/SEM-EDS chemo physical char...Geological sequestration of CO_(2)is critical for deep decarbonization,but the geomechanical stability of coal reservoirs remains a major challenge.This study integrates nanoindentation,XRD/SEM-EDS chemo physical characterization and 4D CT visualization to investigate the time-evolving mechanical degradation of bituminous coals with ScCO_(2)injection.The main results show that 4 d of ScCO_(2)treatment caused 50.47%–80.99%increase in load–displacement deformation and 26.92%–76.17%increase in creep depth at peak load,accompanied by 55.01%–63.38%loss in elastic modulus and 52.83%–74.81%reduction in hardness.The degradation exhibited biphasic kinetics,characterized by rapid surface-driven weakening(0–2 d),followed by stabilized matrix-scale pore homogenization(2–4 d).ScCO_(2)preferentially dissolved carbonate minerals(dolomite),driving pore network expansion and interfacial debonding,while silicate minerals resisted dissolution but promoted structural homogenization.These coupled geochemical-mechanical processes reduced the mechanical heterogeneity of the coal and altered its failure modes.The results establish a predictive framework for reservoir stability assessment and provide actionable insights for optimizing CO_(2)enhanced coalbed methane recovery.展开更多
基金funding support of the State Key Research Development Program of China (Nos. 2016YFC0600708 and 2016YFC0801402)
文摘This paper focuses on anisotropy of coal permeability and its stress sensitivity.Coal blocks were taken from Xinjing Coal Mine in Yangquan Coal District.Coal cores were then drilled along the strike,dip,and vertical directions.Coal permeabilities were measured with respect to stress by using a self-developed coal permeability measurement system.The used samples exhibited significant permeability anisotropy.The permeability along the strike direction was greatest among the three directions,the permeability along the vertical direction was the smallest,and the permeability along the dip direction was between the other two directions.The sensitivity of coal permeability to stress was transversely isotropic.The stress sensitivity coefficient was greater along the horizontal directions than along the vertical directions.Coal permeability exhibited anisotropic stress sensitivity due to anisotropy in Young’s modulus and porosity.The results obtained in this study are useful for optimizing the arrangement of pre-drainage boreholes.
文摘High nitrogen stainless steel with nitrogen content of 0.75%was welded by gas metal arc welding with Ar-N_(2)-O_(2)ternary shielding gas.The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified.Surfacing test was conducted first to compare the ability of O_(2)and CO_(2)in prompting nitrogen dissolution.The nitrogen content of the surfacing metal with O_(2)is slightly higher than CO_(2).And then AreN_(2)-O_(2)shielding gas was applied to weld high nitrogen stainless steel.After using N_(2)-containing shielding gas,the nitrogen content of the weld was improved by 0.1 wt%.As N_(2)continued to increase,the increment of nitrogen content was not obvious,but the ferrite decreased from the top to the bottom.When the proportion of N_(2)reached 20%,a full austenitic weld was obtained and the tensile strength was improved by 8.7%.Combined with the results of surfacing test and welding test,it is concluded that the main effect of N_(2)is to inhibit the escape of nitrogen and suppress the nitrogen diffusion from bottom to the top in the molten pool.
基金supported by the National Natural Science Foundation of China(Nos.52204206 and U24A2090)the Fundamental Research Funds for the Central Universities of China(No.2023CDJXY-006).
文摘Geological sequestration of CO_(2)is critical for deep decarbonization,but the geomechanical stability of coal reservoirs remains a major challenge.This study integrates nanoindentation,XRD/SEM-EDS chemo physical characterization and 4D CT visualization to investigate the time-evolving mechanical degradation of bituminous coals with ScCO_(2)injection.The main results show that 4 d of ScCO_(2)treatment caused 50.47%–80.99%increase in load–displacement deformation and 26.92%–76.17%increase in creep depth at peak load,accompanied by 55.01%–63.38%loss in elastic modulus and 52.83%–74.81%reduction in hardness.The degradation exhibited biphasic kinetics,characterized by rapid surface-driven weakening(0–2 d),followed by stabilized matrix-scale pore homogenization(2–4 d).ScCO_(2)preferentially dissolved carbonate minerals(dolomite),driving pore network expansion and interfacial debonding,while silicate minerals resisted dissolution but promoted structural homogenization.These coupled geochemical-mechanical processes reduced the mechanical heterogeneity of the coal and altered its failure modes.The results establish a predictive framework for reservoir stability assessment and provide actionable insights for optimizing CO_(2)enhanced coalbed methane recovery.
