The ion source of the electron cyclotron resonance ion thruster （ECRIT） extracts ions from its ECR plasma to generate thrust, and has the property of low gas consumption （2 seem, standard-state cubic centimeter per...The ion source of the electron cyclotron resonance ion thruster （ECRIT） extracts ions from its ECR plasma to generate thrust, and has the property of low gas consumption （2 seem, standard-state cubic centimeter per minute） and high durability. Due to the indispensable effects of the primary electron in gas discharge, it is important to experimentally clarify the electron energy structure within the ion source of the ECRIT through analyzing the electron energy distribution function （EEDF） of the plasma inside the thruster. In this article the Langmuir probe diagnosing method was used to diagnose the EEDF, from which the effective electron temperature, plasma density and the electron energy probability function （EEPF） were deduced. The experimental results show that the magnetic field influences the curves of EEDF and EEPF and make the effective plasma parameter nonuniform. The diagnosed electron temperature and density from sample points increased from 4 eV/2 ×10^16 m-3 to 10 eV/4×10^16 m-3 with increasing distances from both the axis and the screen grid of the ion source. Electron temperature and density peaking near the wall coincided with the discharge process. However, a double Maxwellian electron distribution was unexpectedly observed at the position near the axis of the ion source and about 30 mm from the screen grid. Besides, the double Maxwellian electron distribution was more likely to emerge at high power and a low gas flow rate. These phenomena were believed to relate to the arrangements of the gas inlets and the magnetic field where the double Maxwellian electron distribution exits. The results of this research may enhance the understanding of the plasma generation process in the ion source of this type and help to improve its performance.展开更多
在真空环境下,用采集板模拟离子作用将电子束从ECR中和器中引出,实验研究ECR中和器结构以及工作参数对引出电子束流和中和器性能的影响,从而确定最佳的ECR中和器结构和工作参数。实验结果表明:在最佳的ECR中和器结构组合条件下,气体流量...在真空环境下,用采集板模拟离子作用将电子束从ECR中和器中引出,实验研究ECR中和器结构以及工作参数对引出电子束流和中和器性能的影响,从而确定最佳的ECR中和器结构和工作参数。实验结果表明:在最佳的ECR中和器结构组合条件下,气体流量0.8 m L·min-1、电子束引出偏压88.6 V时,可以引出103.8 m A的束流,推进剂利用效率和电子损耗分别为1.278 9和194.573 W·A-1,能满足ECR离子源离子引出束流的需要。展开更多
Through diagnosing the plasma density and calculating the intensity of microwave electric field,four 10 cm electron cyclotron resonance(ECR)ion sources with different magnetic field structures are studied to reveal th...Through diagnosing the plasma density and calculating the intensity of microwave electric field,four 10 cm electron cyclotron resonance(ECR)ion sources with different magnetic field structures are studied to reveal the inside interaction between the plasma,magnetic field and microwave electric field.From the diagnosing result it can be found that the plasma density distribution is controlled by the plasma generation and electron loss volumes associated with the magnetic field and microwave power level.Based on the cold plasma hypothesis and diagnosing result,the microwave electric field intensity distribution in the plasma is calculated.The result shows that the plasma will significantly change the distribution of the microwave electric field intensity to form a bow shape.From the boundary region of the shape to the center,the electric field intensity varies from higher to lower and the diagnosed density inversely changes.If the bow and its inside lower electric field intensity region are close to the screen grid,the performance of ion beam extracting will be better.The study can provide useful information for the creating of 10 cm ECR ion source and understanding its mechanism.展开更多
An electron cyclotron resonance ion thruster must emit an electron current equivalent to its ion beam current to prevent the thruster system from being electrically charged. This operation is defined as neutralization...An electron cyclotron resonance ion thruster must emit an electron current equivalent to its ion beam current to prevent the thruster system from being electrically charged. This operation is defined as neutralization. The factors which influence neutralization are categorized into the ion beam current parameters, the neutralizer input parameters, and the neutralizer position. To understand the mechanism of neutralization, an experiment and a calculation study on how these factors influence thruster neutralization are presented. The experiment results show that the minimum bias voltage of the neutralizer was -60 V at the ion beam current of 80 mA for the argon propellant, and a critical gas flow rate existed, below which the coupling voltage increased sharply. Based on the experiment, the neutralization was analyzed by means of a onedimensional calculation model. The computation results show that the coupling voltage was influenced by the beam divergence and the negative potential zone near the grids.展开更多
基金supported by National Natural Science Foundation of China(No.11475137)
文摘The ion source of the electron cyclotron resonance ion thruster （ECRIT） extracts ions from its ECR plasma to generate thrust, and has the property of low gas consumption （2 seem, standard-state cubic centimeter per minute） and high durability. Due to the indispensable effects of the primary electron in gas discharge, it is important to experimentally clarify the electron energy structure within the ion source of the ECRIT through analyzing the electron energy distribution function （EEDF） of the plasma inside the thruster. In this article the Langmuir probe diagnosing method was used to diagnose the EEDF, from which the effective electron temperature, plasma density and the electron energy probability function （EEPF） were deduced. The experimental results show that the magnetic field influences the curves of EEDF and EEPF and make the effective plasma parameter nonuniform. The diagnosed electron temperature and density from sample points increased from 4 eV/2 ×10^16 m-3 to 10 eV/4×10^16 m-3 with increasing distances from both the axis and the screen grid of the ion source. Electron temperature and density peaking near the wall coincided with the discharge process. However, a double Maxwellian electron distribution was unexpectedly observed at the position near the axis of the ion source and about 30 mm from the screen grid. Besides, the double Maxwellian electron distribution was more likely to emerge at high power and a low gas flow rate. These phenomena were believed to relate to the arrangements of the gas inlets and the magnetic field where the double Maxwellian electron distribution exits. The results of this research may enhance the understanding of the plasma generation process in the ion source of this type and help to improve its performance.
文摘在真空环境下,用采集板模拟离子作用将电子束从ECR中和器中引出,实验研究ECR中和器结构以及工作参数对引出电子束流和中和器性能的影响,从而确定最佳的ECR中和器结构和工作参数。实验结果表明:在最佳的ECR中和器结构组合条件下,气体流量0.8 m L·min-1、电子束引出偏压88.6 V时,可以引出103.8 m A的束流,推进剂利用效率和电子损耗分别为1.278 9和194.573 W·A-1,能满足ECR离子源离子引出束流的需要。
基金the National Natural Science Foundation of China(Grant No.11875222)。
文摘Through diagnosing the plasma density and calculating the intensity of microwave electric field,four 10 cm electron cyclotron resonance(ECR)ion sources with different magnetic field structures are studied to reveal the inside interaction between the plasma,magnetic field and microwave electric field.From the diagnosing result it can be found that the plasma density distribution is controlled by the plasma generation and electron loss volumes associated with the magnetic field and microwave power level.Based on the cold plasma hypothesis and diagnosing result,the microwave electric field intensity distribution in the plasma is calculated.The result shows that the plasma will significantly change the distribution of the microwave electric field intensity to form a bow shape.From the boundary region of the shape to the center,the electric field intensity varies from higher to lower and the diagnosed density inversely changes.If the bow and its inside lower electric field intensity region are close to the screen grid,the performance of ion beam extracting will be better.The study can provide useful information for the creating of 10 cm ECR ion source and understanding its mechanism.
基金support from National Natural Science Foundation of China (Grant No. 11475137)
文摘An electron cyclotron resonance ion thruster must emit an electron current equivalent to its ion beam current to prevent the thruster system from being electrically charged. This operation is defined as neutralization. The factors which influence neutralization are categorized into the ion beam current parameters, the neutralizer input parameters, and the neutralizer position. To understand the mechanism of neutralization, an experiment and a calculation study on how these factors influence thruster neutralization are presented. The experiment results show that the minimum bias voltage of the neutralizer was -60 V at the ion beam current of 80 mA for the argon propellant, and a critical gas flow rate existed, below which the coupling voltage increased sharply. Based on the experiment, the neutralization was analyzed by means of a onedimensional calculation model. The computation results show that the coupling voltage was influenced by the beam divergence and the negative potential zone near the grids.
