这是一篇矿山生态修复领域的论文。矿山开发过程中不可避免产生大量废石,废石中重金属元素在风化、淋溶等作用下释放,将对矿区周边水土环境质量产生影响。为了研究某铅锌矿废石重金属元素淋溶规律,分析了该废石的化学组成和产酸潜力。...这是一篇矿山生态修复领域的论文。矿山开发过程中不可避免产生大量废石,废石中重金属元素在风化、淋溶等作用下释放,将对矿区周边水土环境质量产生影响。为了研究某铅锌矿废石重金属元素淋溶规律,分析了该废石的化学组成和产酸潜力。模拟强酸雨环境下,分析了废石中重金属元素溶出率及淋溶前后废石的矿物组成。结果表明:该废石中重金属Cu、Pb、Zn、Cd、As元素无独立矿物,在废石中分散赋存;废石酸中和能力较高,净产酸量NAG为0 kg H_(2)SO_(4)/t,无产酸潜力。在模拟强酸雨淋溶实验中,淋出液pH值均呈弱碱性,这与废石含较多的碱性矿物有关,废石具有一定的酸缓冲能力;第1轮淋溶过程Cu、Pb、Zn、Cd、As元素随淋溶时间延长累积溶出率逐渐升高;第2轮淋溶2周期后Cu、Pb、Zn、Cd元素累积溶出率趋于稳定,后续基本不溶出;As元素累积溶出率随淋溶时间延长而升高;总体而言,废石中重金属溶出率低。废石淋溶前后矿物成分不变,矿物含量略有变化。本文可为矿山废石堆场管理及其周边重金属污染防治提供依据。展开更多
某褐铁矿原矿铁品位39.28%,其中褐铁矿矿物含量占73.86%,具有一定的回收价值。以焦煤为还原剂,采用磁化焙烧-磁选的工艺回收其中的铁,试验主要考察了磁化焙烧温度、时间、还原剂加入量、磨矿细度、磁场强度对铁精矿选别指标的影响。确...某褐铁矿原矿铁品位39.28%,其中褐铁矿矿物含量占73.86%,具有一定的回收价值。以焦煤为还原剂,采用磁化焙烧-磁选的工艺回收其中的铁,试验主要考察了磁化焙烧温度、时间、还原剂加入量、磨矿细度、磁场强度对铁精矿选别指标的影响。确定最佳工艺条件为:磁化焙烧温度800℃,焦煤加入量4%,焙烧时间40 min,焙烧样磨矿至-0.037 mm 90%,磁场强度设置192 KA/m进行磁选,最终可获得磁选精矿铁品位59.76%、铁回收率73.31%的良好指标。展开更多
Figure 3 in the paper[Chin.Phys.B 34020701(2025)]contains an axis labeling error.The revised figure is provided.This modification does not affect the result presented in the paper.
Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we...Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we perform systematic studies on the elastic properties of the Cu–6wt% Ag alloy wire, which is a promising candidate material for the new-generation pulsed magnets, by employing two independent ultrasonic techniques, i.e., resonant ultrasound spectroscopy(RUS) and ultrasound pulse-echo experiments. Our RUS measurements manifest that the elastic properties of the Cu–6wt% Ag alloy wires can be improved by an electroplastic drawing procedure as compared with the conventional cold drawing. We also take this opportunity to test the availability of our newly-built ultrasound pulse-echo facility at the Wuhan National High Magnetic Field Center(WHMFC, China), and the results suggest that the elastic performance of the electroplastically-drawn Cu–6wt% Ag alloy wire remains excellent without anomalous softening under extreme conditions,e.g., in ultra-high magnetic field up to 50 T and nitrogen or helium cryogenic liquids.展开更多
文摘这是一篇矿山生态修复领域的论文。矿山开发过程中不可避免产生大量废石,废石中重金属元素在风化、淋溶等作用下释放,将对矿区周边水土环境质量产生影响。为了研究某铅锌矿废石重金属元素淋溶规律,分析了该废石的化学组成和产酸潜力。模拟强酸雨环境下,分析了废石中重金属元素溶出率及淋溶前后废石的矿物组成。结果表明:该废石中重金属Cu、Pb、Zn、Cd、As元素无独立矿物,在废石中分散赋存;废石酸中和能力较高,净产酸量NAG为0 kg H_(2)SO_(4)/t,无产酸潜力。在模拟强酸雨淋溶实验中,淋出液pH值均呈弱碱性,这与废石含较多的碱性矿物有关,废石具有一定的酸缓冲能力;第1轮淋溶过程Cu、Pb、Zn、Cd、As元素随淋溶时间延长累积溶出率逐渐升高;第2轮淋溶2周期后Cu、Pb、Zn、Cd元素累积溶出率趋于稳定,后续基本不溶出;As元素累积溶出率随淋溶时间延长而升高;总体而言,废石中重金属溶出率低。废石淋溶前后矿物成分不变,矿物含量略有变化。本文可为矿山废石堆场管理及其周边重金属污染防治提供依据。
文摘某褐铁矿原矿铁品位39.28%,其中褐铁矿矿物含量占73.86%,具有一定的回收价值。以焦煤为还原剂,采用磁化焙烧-磁选的工艺回收其中的铁,试验主要考察了磁化焙烧温度、时间、还原剂加入量、磨矿细度、磁场强度对铁精矿选别指标的影响。确定最佳工艺条件为:磁化焙烧温度800℃,焦煤加入量4%,焙烧时间40 min,焙烧样磨矿至-0.037 mm 90%,磁场强度设置192 KA/m进行磁选,最终可获得磁选精矿铁品位59.76%、铁回收率73.31%的良好指标。
文摘Figure 3 in the paper[Chin.Phys.B 34020701(2025)]contains an axis labeling error.The revised figure is provided.This modification does not affect the result presented in the paper.
基金Project supported by the National Key R&D Program of China (Grant Nos. 2022YFA1602602 and 2023YFA1609600)the National Natural Science Foundation of China (Grant No. U23A20580)+3 种基金the open research fund of Songshan Lake Materials Laboratory (Grant No. 2022SLABFN27)Beijing National Laboratory for Condensed Matter Physics (Grant No. 2024BNLCMPKF004)Guangdong Basic and Applied Basic Research Foundation (Grant No. 2022B1515120020)the interdisciplinary program of Wuhan National High Magnetic Field Center at Huazhong University of Science and Technology (Grant No. WHMFC202132)。
文摘Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we perform systematic studies on the elastic properties of the Cu–6wt% Ag alloy wire, which is a promising candidate material for the new-generation pulsed magnets, by employing two independent ultrasonic techniques, i.e., resonant ultrasound spectroscopy(RUS) and ultrasound pulse-echo experiments. Our RUS measurements manifest that the elastic properties of the Cu–6wt% Ag alloy wires can be improved by an electroplastic drawing procedure as compared with the conventional cold drawing. We also take this opportunity to test the availability of our newly-built ultrasound pulse-echo facility at the Wuhan National High Magnetic Field Center(WHMFC, China), and the results suggest that the elastic performance of the electroplastically-drawn Cu–6wt% Ag alloy wire remains excellent without anomalous softening under extreme conditions,e.g., in ultra-high magnetic field up to 50 T and nitrogen or helium cryogenic liquids.
