Introducing voids into AlN layer at a certain height using a simple method is meaningful but challenging.In this work,the AlN/sapphire template with AlN interlayer structure was designed and grown by metal-organic che...Introducing voids into AlN layer at a certain height using a simple method is meaningful but challenging.In this work,the AlN/sapphire template with AlN interlayer structure was designed and grown by metal-organic chemical vapor deposition.Then,the AlN template was annealed at 1700℃for an hour to introduce the voids.It was found that voids were formed in the AlN layer after high-temperature annealing and they were mainly distributed around the AlN interlayer.Meanwhile,the dislocation density of the AlN template decreased from 5.26×10^(9)cm^(-2)to 5.10×10^(8)cm^(-2).This work provides a possible method to introduce voids into AlN layer at a designated height,which will benefit the design of AlN-based devices.展开更多
Al_(1-x)In_(x)N, a Ⅲ-nitride semiconductor material, is currently of great research interest due to its remarkable physical properties and chemical stability. When the Al and In compositions are tuned, its band-gap e...Al_(1-x)In_(x)N, a Ⅲ-nitride semiconductor material, is currently of great research interest due to its remarkable physical properties and chemical stability. When the Al and In compositions are tuned, its band-gap energy varies from 0.7 eV to 6.2 eV, which shows great potential for application in photodetectors. Here, we report the fabrication and performance evaluation of integrated Al_(1-x)In_(x)N on a free-standing GaN substrate through direct radio-frequency magnetron sputtering.The optical properties of Al_(1-x)In_(x)N will be enhanced by the polarization effect of a heterostructure composed of Al_(1-x)In_(x)N and other Ⅲ-nitride materials. An Al_(1-x)In_(x)N/Ga N visible-light photodetector was prepared by semiconductor fabrication technologies such as lithography and metal deposition. The highest photoresponsivity achieved was 1.52 A·W^(-1)under 365 nm wavelength illumination and the photodetector was determined to have the composition Al0.75In0.25N/GaN.A rise time of 0.55 s was observed after transient analysis of the device. The prepared Al_(1-x)In_(x)N visible-light photodetector had a low dark current, high photoresponsivity and fast response speed. By promoting a low-cost, simple fabrication method,this study expands the application of ternary alloy Al_(1-x)In_(x)N visible-light photodetectors in optical communication.展开更多
基金the National Key Research and Development Program of China(Grant No.2017YFB0404100)the National Natural Science Foundation of China(Grant Nos.61827813,61974144,and 62004127)+2 种基金the Key Research Program of the Chinese Academy of Sciences(Grant No.XDPB22)the Key-Area Research and Development Program of Guangdong Province,China(Grant Nos.2020B010169001 and 2020B010174003)the Science and Technology Foundation of Shenzhen(Grant No.JSGG20191129114216474)。
文摘Introducing voids into AlN layer at a certain height using a simple method is meaningful but challenging.In this work,the AlN/sapphire template with AlN interlayer structure was designed and grown by metal-organic chemical vapor deposition.Then,the AlN template was annealed at 1700℃for an hour to introduce the voids.It was found that voids were formed in the AlN layer after high-temperature annealing and they were mainly distributed around the AlN interlayer.Meanwhile,the dislocation density of the AlN template decreased from 5.26×10^(9)cm^(-2)to 5.10×10^(8)cm^(-2).This work provides a possible method to introduce voids into AlN layer at a designated height,which will benefit the design of AlN-based devices.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61974144, 62004127, and 12074263)Key-Area Research and Development Program of Guangdong Province (Grant Nos. 2020B010174003 and 2020B010169001)+2 种基金Guangdong Science Foundation for Distinguished Young Scholars (Grant No. 2022B1515020073)the Science and Technology Foundation of Shenzhen (Grant No. JSGG20191129114216474)the Open Project of State Key Laboratory of Functional Materials for Informatics。
文摘Al_(1-x)In_(x)N, a Ⅲ-nitride semiconductor material, is currently of great research interest due to its remarkable physical properties and chemical stability. When the Al and In compositions are tuned, its band-gap energy varies from 0.7 eV to 6.2 eV, which shows great potential for application in photodetectors. Here, we report the fabrication and performance evaluation of integrated Al_(1-x)In_(x)N on a free-standing GaN substrate through direct radio-frequency magnetron sputtering.The optical properties of Al_(1-x)In_(x)N will be enhanced by the polarization effect of a heterostructure composed of Al_(1-x)In_(x)N and other Ⅲ-nitride materials. An Al_(1-x)In_(x)N/Ga N visible-light photodetector was prepared by semiconductor fabrication technologies such as lithography and metal deposition. The highest photoresponsivity achieved was 1.52 A·W^(-1)under 365 nm wavelength illumination and the photodetector was determined to have the composition Al0.75In0.25N/GaN.A rise time of 0.55 s was observed after transient analysis of the device. The prepared Al_(1-x)In_(x)N visible-light photodetector had a low dark current, high photoresponsivity and fast response speed. By promoting a low-cost, simple fabrication method,this study expands the application of ternary alloy Al_(1-x)In_(x)N visible-light photodetectors in optical communication.
